Merge branch 'master' into FF/MasterDevel

Moose Development/Moose/Core/Event.lua

@@ -1301,7 +1301,7 @@ function EVENT:onEvent( Event )
           -- STATIC
           ---
           Event.TgtDCSUnit = Event.target
-          if Event.target:isExist() and Event.id ~= 33 then -- leave out ejected seat object
+          if Event.target.isExist and Event.target:isExist() and Event.id ~= 33 then -- leave out ejected seat object, check that isExist exists (Kiowa Hellfire issue, Special K)
             Event.TgtDCSUnitName = Event.TgtDCSUnit:getName()
             -- Workaround for borked target info on cruise missiles
             if Event.TgtDCSUnitName and Event.TgtDCSUnitName ~= "" then

Moose Development/Moose/Core/Menu.lua

@@ -2,7 +2,7 @@
 --
 -- ===
 --
--- ### Features:
+-- ## Features:
 --
 --   * Setup mission sub menus.
 --   * Setup mission command menus.
@@ -44,7 +44,11 @@
 --   * @{Core.Menu#MENU_GROUP_COMMAND}: Manages command menus for GROUPs.
 --
 -- ===
---- 
+--
+-- ### [Demo Missions](https://github.com/FlightControl-Master/MOOSE_Demos/tree/master/Core/Menu)
+--
+-- ===
+--
 -- ### Author: **FlightControl**
 -- ### Contributions:
 --
@@ -166,7 +170,8 @@ function MENU_INDEX:Refresh( Group )
 end
 
 do -- MENU_BASE
-  --- @type MENU_BASE
+    ---
+  -- @type MENU_BASE
   -- @extends Core.Base#BASE
   --- Defines the main MENU class where other MENU classes are derived from.
   -- This is an abstract class, so don't use it.
@@ -206,6 +211,7 @@ do -- MENU_BASE
 
     return self
   end
+  
   function MENU_BASE:SetParentMenu( MenuText, Menu )
     if self.ParentMenu then
       self.ParentMenu.Menus = self.ParentMenu.Menus or {}
@@ -277,8 +283,10 @@ do -- MENU_BASE
   end
 
 end
-do -- MENU_COMMAND_BASE
+do 
-  --- @type MENU_COMMAND_BASE
+  ---
+  -- MENU_COMMAND_BASE
+  -- @type MENU_COMMAND_BASE
   -- @field #function MenuCallHandler
   -- @extends Core.Menu#MENU_BASE
 
@@ -343,8 +351,10 @@ do -- MENU_COMMAND_BASE
   end
 end
 
-do -- MENU_MISSION
+do 
-  --- @type MENU_MISSION
+  ---
+  -- MENU_MISSION
+  -- @type MENU_MISSION
   -- @extends Core.Menu#MENU_BASE
   --- Manages the main menus for a complete mission.
   --
@@ -509,8 +519,9 @@ do -- MENU_MISSION_COMMAND
     return self
   end
 end
-do -- MENU_COALITION
+do 
-  --- @type MENU_COALITION
+  --- MENU_COALITION
+  -- @type MENU_COALITION
   -- @extends Core.Menu#MENU_BASE
 
   --- Manages the main menus for DCS.coalition.
@@ -635,9 +646,10 @@ do -- MENU_COALITION
     return self
   end
 end
-do -- MENU_COALITION_COMMAND
+do 
 
-  --- @type MENU_COALITION_COMMAND
+  --- MENU_COALITION_COMMAND
+  -- @type MENU_COALITION_COMMAND
   -- @extends Core.Menu#MENU_COMMAND_BASE
 
   --- Manages the command menus for coalitions, which allow players to execute functions during mission execution.
@@ -725,8 +737,11 @@ do
   -- So every menu for a client created must be tracked so that program logic accidentally does not create.
   -- the same menus twice during initialization logic.
   -- These menu classes are handling this logic with this variable.
+  
   local _MENUGROUPS = {}
-  --- @type MENU_GROUP
+  
+  ---
+  -- @type MENU_GROUP
   -- @extends Core.Menu#MENU_BASE
 
 
@@ -757,7 +772,7 @@ do
   --    MenuStatus[MenuGroupName]:Remove()
   --  end
   --
-  --  --- @param Wrapper.Group#GROUP MenuGroup
+  --  -- @param Wrapper.Group#GROUP MenuGroup
   --  local function AddStatusMenu( MenuGroup )
   --    local MenuGroupName = MenuGroup:GetName()
   --    -- This would create a menu for the red coalition under the MenuCoalitionRed menu object.
@@ -899,8 +914,8 @@ do
     return self
   end
   
-  
+  ---
-  --- @type MENU_GROUP_COMMAND
+  -- @type MENU_GROUP_COMMAND
   -- @extends Core.Menu#MENU_COMMAND_BASE
 
   --- The @{Core.Menu#MENU_GROUP_COMMAND} class manages the command menus for coalitions, which allow players to execute functions during mission execution.
@@ -983,7 +998,8 @@ do
 end
 --- MENU_GROUP_DELAYED
 do
-  --- @type MENU_GROUP_DELAYED
+  ---
+  -- @type MENU_GROUP_DELAYED
   -- @extends Core.Menu#MENU_BASE
 
 
@@ -1034,6 +1050,7 @@ do
   -- @param #MENU_GROUP_DELAYED self
   -- @return #MENU_GROUP_DELAYED
   function MENU_GROUP_DELAYED:Set()
+    if not self.GroupID then return end
     do
       if not self.MenuSet then
         missionCommands.addSubMenuForGroup( self.GroupID, self.MenuText, self.MenuParentPath )
@@ -1106,8 +1123,8 @@ do
     return self
   end
   
-  
+  ---
-  --- @type MENU_GROUP_COMMAND_DELAYED
+  -- @type MENU_GROUP_COMMAND_DELAYED
   -- @extends Core.Menu#MENU_COMMAND_BASE
 
   --- Manages the command menus for coalitions, which allow players to execute functions during mission execution.

Moose Development/Moose/Core/Message.lua

@@ -509,10 +509,10 @@ function MESSAGE.SetMSRS(PathToSRS,Port,PathToCredentials,Frequency,Modulation,G
   end
   
   _MESSAGESRS.label = Label or MSRS.Label or "MESSAGE"
-  _MESSAGESRS.MSRS:SetLabel(Label or "MESSAGE")
+  _MESSAGESRS.MSRS:SetLabel(_MESSAGESRS.label)
 
   _MESSAGESRS.port = Port or MSRS.port or 5002
-  _MESSAGESRS.MSRS:SetPort(Port or 5002)
+  _MESSAGESRS.MSRS:SetPort(_MESSAGESRS.port)
 
   _MESSAGESRS.volume = Volume or MSRS.volume or 1
   _MESSAGESRS.MSRS:SetVolume(_MESSAGESRS.volume)

Moose Development/Moose/Core/Set.lua

@@ -1516,6 +1516,7 @@ do
       self:HandleEvent( EVENTS.Dead, self._EventOnDeadOrCrash )
       self:HandleEvent( EVENTS.Crash, self._EventOnDeadOrCrash )
       self:HandleEvent( EVENTS.RemoveUnit, self._EventOnDeadOrCrash )
+      self:HandleEvent( EVENTS.PlayerLeaveUnit, self._EventOnDeadOrCrash )
       if self.Filter.Zones then
         self.ZoneTimer = TIMER:New(self._ContinousZoneFilter,self)
         local timing = self.ZoneTimerInterval or 30

Moose Development/Moose/Core/Spawn.lua

@@ -292,9 +292,10 @@ SPAWN = {
 
 --- Enumerator for spawns at airbases
 -- @type SPAWN.Takeoff
--- @extends Wrapper.Group#GROUP.Takeoff
+-- @field #number Air Take off happens in air.
-
+-- @field #number Runway Spawn on runway. Does not work in MP!
--- @field #SPAWN.Takeoff Takeoff
+-- @field #number Hot Spawn at parking with engines on.
+-- @field #number Cold Spawn at parking with engines off.
 SPAWN.Takeoff = {
   Air = 1,
   Runway = 2,
@@ -619,12 +620,14 @@ end
 -- and any spaces before and after the resulting name are removed.
 -- IMPORTANT! This method MUST be the first used after :New !!!
 -- @param #SPAWN self
--- @param #boolean KeepUnitNames (optional) If true, the unit names are kept, false or not provided to make new unit names.
+-- @param #boolean KeepUnitNames (optional) If true, the unit names are kept, false or not provided create new unit names.
 -- @return #SPAWN self
 function SPAWN:InitKeepUnitNames( KeepUnitNames )
   self:F()
 
-  self.SpawnInitKeepUnitNames = KeepUnitNames or true
+  self.SpawnInitKeepUnitNames = false
+  
+  if KeepUnitNames == true then self.SpawnInitKeepUnitNames = true end
 
   return self
 end
@@ -1609,8 +1612,8 @@ function SPAWN:SpawnWithIndex( SpawnIndex, NoBirth )
                   RandomVec2 = PointVec3:GetRandomVec2InRadius( self.SpawnOuterRadius, self.SpawnInnerRadius )
                   numTries = numTries + 1
                   inZone = SpawnZone:IsVec2InZone(RandomVec2)
-                  self:I("Retrying " .. numTries .. "spawn " .. SpawnTemplate.name .. " in Zone " .. SpawnZone:GetName() .. "!")
+                  --self:I("Retrying " .. numTries .. "spawn " .. SpawnTemplate.name .. " in Zone " .. SpawnZone:GetName() .. "!")
-                  self:I(SpawnZone)
+                  --self:I(SpawnZone)
                 end
               end
               if (not inZone) then
@@ -3276,7 +3279,7 @@ end
 --- Get the index from a given group.
 -- The function will search the name of the group for a #, and will return the number behind the #-mark.
 function SPAWN:GetSpawnIndexFromGroup( SpawnGroup )
-  self:F2( { self.SpawnTemplatePrefix, self.SpawnAliasPrefix, SpawnGroup } )
+  self:F3( { self.SpawnTemplatePrefix, self.SpawnAliasPrefix, SpawnGroup } )
 
   local IndexString = string.match( SpawnGroup:GetName(), "#(%d*)$" ):sub( 2 )
   local Index = tonumber( IndexString )
@@ -3288,7 +3291,7 @@ end
 
 --- Return the last maximum index that can be used.
 function SPAWN:_GetLastIndex()
-  self:F( { self.SpawnTemplatePrefix, self.SpawnAliasPrefix } )
+  self:F3( { self.SpawnTemplatePrefix, self.SpawnAliasPrefix } )
 
   return self.SpawnMaxGroups
 end
@@ -3437,7 +3440,9 @@ function SPAWN:_Prepare( SpawnTemplatePrefix, SpawnIndex ) -- R2.2
   
   if self.SpawnInitKeepUnitNames == false then
     for UnitID = 1, #SpawnTemplate.units do      
+      if not string.find(SpawnTemplate.units[UnitID].name,"#IFF_",1,true) then --Razbam IFF hack for F15E etc
         SpawnTemplate.units[UnitID].name = string.format( SpawnTemplate.name .. '-%02d', UnitID )    
+      end
       SpawnTemplate.units[UnitID].unitId = nil
     end
   else
@@ -3449,11 +3454,13 @@ function SPAWN:_Prepare( SpawnTemplatePrefix, SpawnIndex ) -- R2.2
       local UnitPrefix, Rest
       if SpawnInitKeepUnitIFF == false then       
         UnitPrefix, Rest = string.match( SpawnTemplate.units[UnitID].name, "^([^#]+)#?" ):gsub( "^%s*(.-)%s*$", "%1" )
-        self:T( { UnitPrefix, Rest } )
-      else
-       UnitPrefix=SpawnTemplate.units[UnitID].name
-      end
         SpawnTemplate.units[UnitID].name = string.format( '%s#%03d-%02d', UnitPrefix, SpawnIndex, UnitID )       
+        self:T( { UnitPrefix, Rest } )
+      --else
+       --UnitPrefix=SpawnTemplate.units[UnitID].name
+      end
+      --SpawnTemplate.units[UnitID].name = string.format( '%s#%03d-%02d', UnitPrefix, SpawnIndex, UnitID )
+      
       SpawnTemplate.units[UnitID].unitId = nil
     end
   end

Moose Development/Moose/Core/Zone.lua

@@ -3076,10 +3076,26 @@ function ZONE_POLYGON:NewFromDrawing(DrawingName)
                     -- points for the drawings are saved in local space, so add the object's map x and y coordinates to get
                     -- world space points we can use
                     for _, point in UTILS.spairs(object["points"]) do
+                        -- check if we want to skip adding a point
+                        local skip = false
                         local p = {x = object["mapX"] + point["x"],
                                    y = object["mapY"] + point["y"] }
+
+                        -- Check if the same coordinates already exist in the list, skip if they do
+                        -- This can happen when drawing a Polygon in Free mode, DCS adds points on
+                        -- top of each other that are in the `mission` file, but not visible in the
+                        -- Mission Editor
+                        for _, pt in pairs(points) do
+                            if pt.x == p.x and pt.y == p.y then
+                                skip = true
+                            end
+                        end
+
+                        -- if it's a unique point, add it
+                        if not skip then
                             table.add(points, p)
                         end
+                    end
                 elseif object["polygonMode"] == "rect" then
                     -- the points for a rect are saved as local coordinates with an angle. To get the world space points from this
                     -- we need to rotate the points around the center of the rects by an angle. UTILS.RotatePointAroundPivot was
@@ -3096,6 +3112,7 @@ function ZONE_POLYGON:NewFromDrawing(DrawingName)
 
                     points = {p1, p2, p3, p4}
                 else
+                    -- bring the Arrow code over from Shape/Polygon
                     -- something else that might be added in the future
                 end
             end

Moose Development/Moose/Functional/Mantis.lua

@@ -22,7 +22,7 @@
 -- @module Functional.Mantis
 -- @image Functional.Mantis.jpg
 --
--- Last Update: Feb 2024
+-- Last Update: May 2024
 
 -------------------------------------------------------------------------
 --- **MANTIS** class, extends Core.Base#BASE
@@ -58,6 +58,7 @@
 -- @field #boolean ShoradLink If true, #MANTIS has #SHORAD enabled
 -- @field #number ShoradTime Timer in seconds, how long #SHORAD will be active after a detection inside of the defense range
 -- @field #number ShoradActDistance Distance of an attacker in meters from a Mantis SAM site, on which Shorad will be switched on. Useful to not give away Shorad sites too early. Default 15km. Should be smaller than checkradius.
+-- @field #boolean checkforfriendlies If true, do not activate a SAM installation if a friendly aircraft is in firing range.
 -- @extends Core.Base#BASE
 
 
@@ -187,29 +188,34 @@
 --        -- This is effectively a 3-stage filter allowing for zone overlap. A coordinate is accepted first when   
 --        -- it is inside any AcceptZone. Then RejectZones are checked, which enforces both borders, but also overlaps of   
 --        -- Accept- and RejectZones. Last, if it is inside a conflict zone, it is accepted.   
---        `mybluemantis:AddZones(AcceptZones,RejectZones,ConflictZones)`   
+--        mybluemantis:AddZones(AcceptZones,RejectZones,ConflictZones)   
 --        
 --        
 -- ### 2.1.2 Change the number of long-, mid- and short-range systems going live on a detected target:   
 -- 
 --        -- parameters are numbers. Defaults are 1,2,2,6 respectively
---        `mybluemantis:SetMaxActiveSAMs(Short,Mid,Long,Classic)`
+--        mybluemantis:SetMaxActiveSAMs(Short,Mid,Long,Classic)
 -- 
 -- ### 2.1.3 SHORAD will automatically be added from SAM sites of type "short-range"   
 --        
 -- ### 2.1.4 Advanced features   
 -- 
 --        -- switch off auto mode **before** you start MANTIS.   
---        `mybluemantis.automode = false`
+--        mybluemantis.automode = false
 --        
 --        -- switch off auto shorad **before** you start MANTIS.   
---        `mybluemantis.autoshorad = false`
+--        mybluemantis.autoshorad = false
 --        
 --        -- scale of the activation range, i.e. don't activate at the fringes of max range, defaults below.   
 --        -- also see engagerange below.   
---        `    self.radiusscale[MANTIS.SamType.LONG] = 1.1`   
+--            self.radiusscale[MANTIS.SamType.LONG] = 1.1   
---        `    self.radiusscale[MANTIS.SamType.MEDIUM] = 1.2`   
+--            self.radiusscale[MANTIS.SamType.MEDIUM] = 1.2   
---        `    self.radiusscale[MANTIS.SamType.SHORT] = 1.3`   
+--            self.radiusscale[MANTIS.SamType.SHORT] = 1.3 
+--        
+-- ### 2.1.5 Friendlies check in firing range
+-- 
+--        -- For some scenarios, like Cold War, it might be useful not to activate SAMs if friendly aircraft are around to avoid death by friendly fire.
+--        mybluemantis.checkforfriendlies = true  
 -- 
 -- # 3. Default settings [both modes unless stated otherwise]
 --
@@ -321,6 +327,7 @@ MANTIS = {
   automode              = true,
   autoshorad            = true,
   ShoradGroupSet        = nil,
+  checkforfriendlies    = false,
 }
 
 --- Advanced state enumerator
@@ -503,6 +510,7 @@ do
     -- DONE: Allow tables of prefixes for the setup
     -- DONE: Auto-Mode with range setups for various known SAM types.
     
+    self.name = name or "mymantis"
     self.SAM_Templates_Prefix = samprefix or "Red SAM"
     self.EWR_Templates_Prefix = ewrprefix or "Red EWR"
     self.HQ_Template_CC = hq or nil
@@ -631,7 +639,7 @@ do
     
     -- TODO Version
     -- @field #string version
-    self.version="0.8.16"
+    self.version="0.8.18"
     self:I(string.format("***** Starting MANTIS Version %s *****", self.version))
 
     --- FSM Functions ---
@@ -1222,10 +1230,10 @@ do
   function MANTIS:_PreFilterHeight(height)
     self:T(self.lid.."_PreFilterHeight")   
     local set = {}
-    local dlink = self.Detection -- Ops.Intelligence#INTEL_DLINK
+    local dlink = self.Detection -- Ops.Intel#INTEL_DLINK
     local detectedgroups = dlink:GetContactTable()
     for _,_contact in pairs(detectedgroups) do
-      local contact = _contact -- Ops.Intelligence#INTEL.Contact
+      local contact = _contact -- Ops.Intel#INTEL.Contact
       local grp = contact.group -- Wrapper.Group#GROUP
       if grp:IsAlive() then
         if grp:GetHeight(true) < height then
@@ -1255,6 +1263,10 @@ do
       -- DEBUG
       set = self:_PreFilterHeight(height)
     end
+    local friendlyset -- Core.Set#SET_GROUP
+    if self.checkforfriendlies == true then
+      friendlyset = SET_GROUP:New():FilterCoalitions(self.Coalition):FilterCategories({"plane","helicopter"}):FilterFunction(function(grp) if grp and grp:InAir() then return true else return false end end):FilterOnce()
+    end
     for _,_coord in pairs (set) do
       local coord = _coord  -- get current coord to check
       -- output for cross-check
@@ -1279,8 +1291,16 @@ do
         local m = MESSAGE:New(text,10,"Check"):ToAllIf(self.debug)
         self:T(self.lid..text)
       end
+      -- friendlies around?
+      local nofriendlies = true
+      if self.checkforfriendlies == true then
+        local closestfriend, distance = friendlyset:GetClosestGroup(samcoordinate)
+        if closestfriend and distance and distance < rad then
+          nofriendlies = false
+        end
+      end
       -- end output to cross-check
-      if targetdistance <= rad and zonecheck then
+      if targetdistance <= rad and zonecheck == true and nofriendlies == true then
         return true, targetdistance
       end
     end
@@ -1777,7 +1797,7 @@ do
   -- @return #MANTIS self
   function MANTIS:_CheckDLinkState()
     self:T(self.lid .. "_CheckDLinkState")
-    local dlink = self.Detection -- Ops.Intelligence#INTEL_DLINK
+    local dlink = self.Detection -- Ops.Intel#INTEL_DLINK
     local TS = timer.getAbsTime()
     if not dlink:Is("Running") and (TS - self.DLTimeStamp > 29) then
       self.DLink = false

Moose Development/Moose/Ops/CSAR.lua

@@ -292,10 +292,11 @@ CSAR.AircraftType["AH-64D_BLK_II"] = 2
 CSAR.AircraftType["Bronco-OV-10A"] = 2
 CSAR.AircraftType["MH-60R"] = 10
 CSAR.AircraftType["OH-6A"] = 2
+CSAR.AircraftType["OH-58D"] = 2
 
 --- CSAR class version.
 -- @field #string version
-CSAR.version="1.0.23"
+CSAR.version="1.0.24"
 
 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
 -- ToDo list

Moose Development/Moose/Ops/CTLD.lua

@@ -1250,11 +1250,12 @@ CTLD.UnitTypeCapabilities = {
     ["AH-64D_BLK_II"] = {type="AH-64D_BLK_II", crates=false, troops=true, cratelimit = 0, trooplimit = 2, length = 17, cargoweightlimit = 200}, -- 2 ppl **outside** the helo
     ["Bronco-OV-10A"] = {type="Bronco-OV-10A", crates= false, troops=true, cratelimit = 0, trooplimit = 5, length = 13, cargoweightlimit = 1450},
     ["OH-6A"] = {type="OH-6A", crates=false, troops=true, cratelimit = 0, trooplimit = 4, length = 7, cargoweightlimit = 550},
+    ["OH-58D"] = {type="OH-58D", crates=false, troops=false, cratelimit = 0, trooplimit = 0, length = 14, cargoweightlimit = 400},
 }
 
 --- CTLD class version.
 -- @field #string version
-CTLD.version="1.0.53"
+CTLD.version="1.0.54"
 
 --- Instantiate a new CTLD.
 -- @param #CTLD self

Moose Development/Moose/Utilities/Utils.lua

@@ -1951,6 +1951,8 @@ function UTILS.GMTToLocalTimeDifference()
     return -3  -- Fireland is UTC-3 hours.
   elseif theatre==DCSMAP.Sinai then
     return 2   -- Currently map is +2 but should be +3 (DCS bug?)
+  elseif theatre==DCSMAP.Kola then
+    return 3   -- Currently map is +2 but should be +3 (DCS bug?)
   else
     BASE:E(string.format("ERROR: Unknown Map %s in UTILS.GMTToLocal function. Returning 0", tostring(theatre)))
     return 0
@@ -2247,6 +2249,11 @@ function UTILS.IsLoadingDoorOpen( unit_name )
         return true
       end
 
+      if type_name == " OH-58D" and (unit:getDrawArgumentValue(35) > 0 or unit:getDrawArgumentValue(421) == -1) then
+        BASE:T(unit_name .. " cargo door is open")
+        return true
+      end
+
       return false
 
   end -- nil
@@ -2477,7 +2484,7 @@ function UTILS.SaveToFile(Path,Filename,Data)
   return true
 end
 
---- Function to save an object to a file
+--- Function to load an object from a file.
 -- @param #string Path The path to use. Use double backslashes \\\\ on Windows filesystems.
 -- @param #string Filename The name of the file.
 -- @return #boolean outcome True if reading is possible and successful, else false.

Moose Development/Moose/Wrapper/Airbase.lua

@@ -722,35 +722,35 @@ AIRBASE.Sinai = {
 
 --- Airbases of the Kola map
 -- 
+-- * AIRBASE.Kola.Banak
 -- * AIRBASE.Kola.Bas_100
 -- * AIRBASE.Kola.Bodo
 -- * AIRBASE.Kola.Jokkmokk
 -- * AIRBASE.Kola.Kalixfors
 -- * AIRBASE.Kola.Kemi_Tornio
 -- * AIRBASE.Kola.Kiruna
--- * AIRBASE.Kola.Lakselv
 -- * AIRBASE.Kola.Monchegorsk
 -- * AIRBASE.Kola.Murmansk_International
--- * AIRBASE.Kola.Olenegorsk
+-- * AIRBASE.Kola.Olenya
 -- * AIRBASE.Kola.Rovaniemi
--- * AIRBASE.Kola.Severomorsk1
+-- * AIRBASE.Kola.Severomorsk_1
--- * AIRBASE.Kola.Severomorsk3
+-- * AIRBASE.Kola.Severomorsk_3
 -- 
 -- @field Kola
 AIRBASE.Kola = {
+  ["Banak"] = "Banak",
   ["Bas_100"] = "Bas 100",
   ["Bodo"] = "Bodo",
   ["Jokkmokk"] = "Jokkmokk",
   ["Kalixfors"] = "Kalixfors",
   ["Kemi_Tornio"] = "Kemi Tornio",
   ["Kiruna"] = "Kiruna",
-  ["Lakselv"] = "Lakselv",
   ["Monchegorsk"] = "Monchegorsk",
   ["Murmansk_International"] = "Murmansk International",
-  ["Olenegorsk"] = "Olenegorsk",
+  ["Olenya"] = "Olenya",
   ["Rovaniemi"] = "Rovaniemi",
-  ["Severomorsk1"] = "Severomorsk1",
+  ["Severomorsk_1"] = "Severomorsk-1",
-  ["Severomorsk3"] = "Severomorsk3",
+  ["Severomorsk_3"] = "Severomorsk-3",
 }
 
 --- AIRBASE.ParkingSpot ".Coordinate, ".TerminalID", ".TerminalType", ".TOAC", ".Free", ".TerminalID0", ".DistToRwy".

Moose Development/Moose/Wrapper/Group.lua

@@ -1207,6 +1207,7 @@ function GROUP:GetCoordinate()
   -- no luck, try the API way
   
   local DCSGroup = Group.getByName(self.GroupName)
+  if DCSGroup then
     local DCSUnits = DCSGroup:getUnits() or {}
     for _,_unit in pairs(DCSUnits) do
       if Object.isExist(_unit) then
@@ -1219,6 +1220,7 @@ function GROUP:GetCoordinate()
         end
       end
     end
+  end
   
   BASE:E( { "Cannot GetCoordinate", Group = self, Alive = self:IsAlive() } )