lantiq: more vdsl related cleanups

* atm module needs to be loaded before linux-atm
* use absolute firmware paths
* extended validation
* add a script for mounting an optional firmware partition

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40460 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/network/config/ltq-adsl-app/files/dsl_control

@@ -38,11 +38,15 @@ start() {
 	eval "xtu=\"\${annex_$annex}\""
 
 	[ -z "${firmware}" ] &&
-		firmware=adsl.bin
+		firmware=/lib/firmware/adsl.bin
+	[ -f "${firmware}" ] || {
+		echo failed to find $firmware
+		return 1
+	}
 
 	service_start /sbin/dsl_cpe_control -i${xtu} \
 			-n /sbin/dsl_notify.sh \
-			-f /lib/firmware/${firmware}
+			-f ${firmware}
 }
 
 stop() {

package/network/config/ltq-vdsl-app/files/dsl_control

@@ -1,7 +1,8 @@
 #!/bin/sh /etc/rc.common
 # Copyright (C) 2012 OpenWrt.org
 
-START=99
+# needs to start before the atm layer which starts at 50
+START=48
 
 EXTRA_COMMANDS="status lucistat"
 EXTRA_HELP="	status  Get DSL status information
@@ -153,7 +154,7 @@ start() {
 	esac
 
 	eval "xtse_adsl=\"\${xtse_adsl_$annex}\""
-	[ -z "${xtse_adsl}" ] && xtse_adsl=$xtse_adsl_b
+	[ -z "${xtse_adsl}" ] && xtse_adsl=$xtse_adsl_a
 
 	eval "tone_adsl=\"\${tone_adsl_$tone}\""
 	[ -z "${tone_adsl}" ] && tone_adsl=$tone_adsl_av
@@ -161,7 +162,11 @@ start() {
 	eval "tone_vdsl=\"\${tone_vdsl_$tone}\""
 	[ -z "${tone_vdsl}" ] && tone_vdsl=$tone_vdsl_av
 		
-	[ -z "${firmware}" ] && firmware=vdsl.bin
+	[ -z "${firmware}" ] && firmware=/lib/firmware/vdsl.bin
+	[ -f "${firmware}" ] || {
+		echo failed to find $firmware
+		return 1
+	}
 
 	xdsl_scr adsl "${xtse_adsl}"
 	xdsl_scr vdsl "${xtse_vdsl}"
@@ -170,7 +175,7 @@ start() {
 	service_start /sbin/vdsl_cpe_control \
 			-i `echo $xtse_adsl | sed "s/ /_/g"` \
 			-n /sbin/dsl_notify.sh \
-			-f /lib/firmware/${firmware} \
+			-f ${firmware} \
 			-a /tmp/adsl.scr \
 			-A /tmp/vdsl.scr \
 			-l /tmp/lowlevel.cfg \

target/linux/lantiq/base-files/etc/init.d/dsl_fs

@@ -0,0 +1,13 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2014 OpenWrt.org
+
+. /lib/functions.sh
+
+START=30
+start() {
+	MTD=$(find_mtd_index dsl_fw)
+	[ "$MTD" -gt 0 ] && {
+		mkdir -p /lib/firmware/dsl/
+		mount -t jffs2 /dev/mtdblock$MTD /lib/firmware/dsl/
+	}
+}

target/linux/lantiq/base-files/etc/uci-defaults/02_network

@@ -32,9 +32,9 @@ set_adsl_modem() {
 	local annex=$1
 	local firmware=$2
 	uci batch <<EOF
-set network.adsl='dsl-modem'
+set network.dsl='adsl'
-set network.adsl.annex='$annex'
+set network.dsl.annex='$annex'
-set network.adsl.firmware='$firmware'
+set network.dsl.firmware='$firmware'
 EOF
 }
 
@@ -44,11 +44,11 @@ set_vdsl_modem() {
 	local tone=$3
 	local xfer_mode=$4
 	uci batch <<EOF
-set network.vdsl='dsl-modem'
+set network.dsl='vdsl'
-set network.vdsl.annex='$annex'
+set network.dsl.annex='$annex'
-set network.vdsl.firmware='$firmware'
+set network.dsl.firmware='$firmware'
-set network.vdsl.tone='$tone'
+set network.dsl.tone='$tone'
-set network.vdsl.xfer_mode='$xfer_mode'
+set network.dsl.xfer_mode='$xfer_mode'
 EOF
 }
 
@@ -170,9 +170,9 @@ esac
 [ -z "$(ls /lib/modules/`uname -r`/ltq_atm*)" ] || set_atm_wan "$vpi" "$vci" "$encaps" "$payload"
 
 if [ -n "$(grep "system type.*: VR9" /proc/cpuinfo)" ]; then
-	set_vdsl_modem "$annex" "vdsl.bin" "bv" "ptm"
+	set_vdsl_modem "$annex" "/lib/firmware/vdsl.bin" "av" "ptm"
 else
-	set_adsl_modem "$annex" "adsl.bin"
+	set_adsl_modem "$annex" "/lib/firmware/adsl.bin"
 fi
 
 [ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac