Antminers using the stock bootloader will not hash without this GPIO set.
Applies to DD and CC
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Backport of r47261
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47267 3c298f89-4303-0410-b956-a3cf2f4a3e73
Sets the LEDs to boardname:color:led-name
Sets the LAN to eth0
Corrects the profile names in the Makefile and changes tabs to spaces
in the Makefile 'define Device/' like the other devices.
Other corrections such as the Machine Name and HWIDs
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47242 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch supersedes the v1 from September 17th.
Bumping the patch version - the MiniBox profile showed up under M, but
since it's called 'Gainstrong MiniBox v1.0' now it looks out of place.
Renamed the profile to gs-minibox-v1.mk to fix that.
The following patch adds support for the Gainstrong MiniBox to 15.05
Chaos Calmer.
Fixed items:
- Inverted LED polarity (OOLITE seems to suffer from the same problem).
- Changed uppercase MINIBOX_V1_ prefix as requested.
- Prefixes are now gs_minibox_ similar to gs_oolite_ (same vendor).
- Mention the vendor (Gainstrong) in code headers.
Compiles fine, has been confirmed working by owners.
Question: I've seen some boards use tools/firmware-utils/src/mktplinkfw.c,
the MiniBox images build fine without, so I'm wondering: do I need to add
it in there as well? Any added benefit?
Thank you
Signed-off by: Stijn Segers <francesco.borromini@inventati.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47235 3c298f89-4303-0410-b956-a3cf2f4a3e73
Support for WeIO board (http://we-io.net),
backported from Designated Driver trunk.
Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com>
Backport of r47110
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47232 3c298f89-4303-0410-b956-a3cf2f4a3e73
backport of r46248.
Signed-off-by: Jaehoon You <teslamint@gmail.com>
rebased on r46767.
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47191 3c298f89-4303-0410-b956-a3cf2f4a3e73
Kinda-backport of r46415, though this patch uses the old-style calibration data loading.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46673 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46541
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46542 3c298f89-4303-0410-b956-a3cf2f4a3e73
EPG5000 uses ath79 nvram functions, but does not select it. This breaks
build if no other board support enabling nvram support is selected.
Closes#19952.
Backport of r46190.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46494 3c298f89-4303-0410-b956-a3cf2f4a3e73
NB that wlan5g is phy0tpt and wlan2g phy1tpt.
Backport of r46226.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46450 3c298f89-4303-0410-b956-a3cf2f4a3e73
The designated blue WAN port on both devices has index 5, not 1.
Backport of r46227.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46449 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r46049.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46448 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r46048.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46447 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r46047.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46446 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r46236 to CC : add support for the Bitmain Antminer S3
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46445 3c298f89-4303-0410-b956-a3cf2f4a3e73
r45954 ("ar71xx: fix 100/10mbps ethernet link issues on mynet range
extender") introduced a pdata based modification of the tx_clk_dly. But it
was not checked if pdata actually existed. This caused a page fault on all
devices which didn't have at803x_platform_data specified for an at803x
based device.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
Backport of r46200
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46252 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
Backport of r46049
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46059 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
Backport of r46048
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46058 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
Backport of r46047
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46057 3c298f89-4303-0410-b956-a3cf2f4a3e73
The hardware should be almost the same as TL-WR720N-v3. WiFi and LAN networks
were tested by "Lo Yuk Fai <loyukfai@gmail.com>". Failsafe and slider switch
were tested by "Wong min <alpha080@gmail.com>".
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Backport of r46046
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46056 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner
http://wiki.openwrt.org/toh/bitmain/s1
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: James Hilliard <james.hilliard1@gmail.com>
Backport of r46044
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46054 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46032
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46033 3c298f89-4303-0410-b956-a3cf2f4a3e73
It seems that there are maximum timings for mdio accesses that can be
hit when the system is under load and the thread is scheduled during
a read or write access. Since there is no way of knowing if this
happens as there is not even a parity bit, try to work around it
by disabling interrupts during any gpio-mdio accesses.
Performance impact seems to be neglectable, as mdio accesses are not
that often.
Hopefully fixes#19500.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Backport of r46012.
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46016 3c298f89-4303-0410-b956-a3cf2f4a3e73
AR8337 supports a configuration bit to swap MAC0 and MAC6.
Currently this is set in general if an AR8337 is detected and causes
issues with devices using an AR8334 (internally an AR8337, just
less chip pins).
And it might even cause issues with AR8337-based devices with
different board designs.
Swapping the MAC's however isn't needed for AR8337 in general.
It's just needed in case of certain board designs (affected devices
seem to be based on Atheros reference board AP135/136-010).
Therefore this configuration bit should be moved to platform data.
The patch includes the needed changes to the device initialization
code of affected devices. Hopefully I didn't miss any ..
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45970 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds the pll_1000 value for eth0 interface. This makes the Rocket M
XW image compatible with other Ubiquiti devices with similar hardware with a
Gigabit Ethernet port.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45965 3c298f89-4303-0410-b956-a3cf2f4a3e73
In new firmware-4.bin (for ath10k) mac offset is 0x114 (276), not 0x118 (280).
This also closes#19751, bug introduced in #45624
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45958 3c298f89-4303-0410-b956-a3cf2f4a3e73
The mynet range extender hardware is suffering from ethernet
link loss when booting with a recent openwrt image. This only
happens on 100mbps links, with 1Gbps speed the link was fine.
The cause of the problem is that the AR8035 PHY (aka F1E)
requires turning on and off the special TX delay setting
depending on the speed of the link.
The 10mbps mode only needed the proper pll value, which was
extracted from the vendor code.
Reported-by: Pascal Paradis
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45954 3c298f89-4303-0410-b956-a3cf2f4a3e73
They are useless, as the platform already selects the right options for
NAND support. The main reason for removing them is the fact that it
makes kernel configs more annoying to maintain on platforms that provide
NAND drivers but disable them (e.g. ramips)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45919 3c298f89-4303-0410-b956-a3cf2f4a3e73
The v1 identifies as v10 internally. As there is no TL-WA830RE v10, add a
workaround to avoid confusing users.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45903 3c298f89-4303-0410-b956-a3cf2f4a3e73
Building the loader in Image/Build/TPLINK-SAFELOADER would break the image
builder as no target compiler is available in that stage.
Fixes#19580
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45855 3c298f89-4303-0410-b956-a3cf2f4a3e73
In contrast to Image/BuildLoader, Image/BuildLoaderPatched first patches the
kernel command line in the image and then builds the loader without command
line. This allows building loaders for systems which don't boot correctly when
the kernel command line is provided by the loader (like the TP-LINK CPE series).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45854 3c298f89-4303-0410-b956-a3cf2f4a3e73
move the patch to the proper folder
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45848 3c298f89-4303-0410-b956-a3cf2f4a3e73
