Backport of r46047.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46446 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r46236 to CC : add support for the Bitmain Antminer S3
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46445 3c298f89-4303-0410-b956-a3cf2f4a3e73
Set up eth0 as LAN interface by default.
Backport of r46174
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46419 3c298f89-4303-0410-b956-a3cf2f4a3e73
The AT91 SAMA5D3XPLAINED uses a KSZ9031 and a KSZ8081 that are supported
by this PHY driver.
Backport of r46171
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46416 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46410
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46411 3c298f89-4303-0410-b956-a3cf2f4a3e73
This should fix build of sunxi.
Backport of r46304
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46310 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add features ext4 targz to target x86/xen_domu in order to
generate images in defconfig.
This fixes#18074.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Backport of r46233
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46277 3c298f89-4303-0410-b956-a3cf2f4a3e73
r45954 ("ar71xx: fix 100/10mbps ethernet link issues on mynet range
extender") introduced a pdata based modification of the tx_clk_dly. But it
was not checked if pdata actually existed. This caused a page fault on all
devices which didn't have at803x_platform_data specified for an at803x
based device.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
Backport of r46200
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46252 3c298f89-4303-0410-b956-a3cf2f4a3e73
Also move it to an earlier place so new boards added are less likely
to confuse quilt.
Fixes#19965.
Backport of r46148.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46153 3c298f89-4303-0410-b956-a3cf2f4a3e73
On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000
(BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port
5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and
usually 3 of them are connected to the SoC.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46104
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46107 3c298f89-4303-0410-b956-a3cf2f4a3e73
This drops some debugging pr_info and adds platform_device_unregister.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46082
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46098 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
Backport of r46049
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46059 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
Backport of r46048
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46058 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
Backport of r46047
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46057 3c298f89-4303-0410-b956-a3cf2f4a3e73
The hardware should be almost the same as TL-WR720N-v3. WiFi and LAN networks
were tested by "Lo Yuk Fai <loyukfai@gmail.com>". Failsafe and slider switch
were tested by "Wong min <alpha080@gmail.com>".
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Backport of r46046
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46056 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner
http://wiki.openwrt.org/toh/bitmain/s1
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: James Hilliard <james.hilliard1@gmail.com>
Backport of r46044
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46054 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds support for the Linksys RE6500 Range Extender
http://wiki.openwrt.org/toh/linksys/re6500
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Backport of r46043
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46053 3c298f89-4303-0410-b956-a3cf2f4a3e73
http://wiki.openwrt.org/toh/d-link/dcs-930l
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Backport of r46042
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46052 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch is for PandoraBox PBR-M1 which is based on mt7621,
all the features work fine, including rtc, leds, button, usb3.0, etc.
Signed-off-by: tymon <banglang.huang@foxmail.com>
Backport of r46041
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46051 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46038
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46039 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46032
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46033 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is required to use x86/64 in KVM containers with VirtIO disks
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
Backport of r46017
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46018 3c298f89-4303-0410-b956-a3cf2f4a3e73
It seems that there are maximum timings for mdio accesses that can be
hit when the system is under load and the thread is scheduled during
a read or write access. Since there is no way of knowing if this
happens as there is not even a parity bit, try to work around it
by disabling interrupts during any gpio-mdio accesses.
Performance impact seems to be neglectable, as mdio accesses are not
that often.
Hopefully fixes#19500.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Backport of r46012.
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46016 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46007
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46009 3c298f89-4303-0410-b956-a3cf2f4a3e73
This stabilizes USB support. The old patch was handling initialization
in a different order that was causing some problems with few USB 3.0
devices. Some weren't detected, some were working unstable, sometimes
USB 3.0 could hang the whole controller.
A still known issue (but not a regression) is controller hang triggered
by connecting USB 1.1 device when not having OHCI controller enabled
(kmod-usb-ohci).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r45997
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@45998 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r45992
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@45993 3c298f89-4303-0410-b956-a3cf2f4a3e73
AR8337 supports a configuration bit to swap MAC0 and MAC6.
Currently this is set in general if an AR8337 is detected and causes
issues with devices using an AR8334 (internally an AR8337, just
less chip pins).
And it might even cause issues with AR8337-based devices with
different board designs.
Swapping the MAC's however isn't needed for AR8337 in general.
It's just needed in case of certain board designs (affected devices
seem to be based on Atheros reference board AP135/136-010).
Therefore this configuration bit should be moved to platform data.
The patch includes the needed changes to the device initialization
code of affected devices. Hopefully I didn't miss any ..
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45970 3c298f89-4303-0410-b956-a3cf2f4a3e73
