This isn't that important due to different NAND driver but keeps DTS and
backports consistent.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Inspired by r46892 (trunk).
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46902 3c298f89-4303-0410-b956-a3cf2f4a3e73
It was accidentally added in r46094.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46849 3c298f89-4303-0410-b956-a3cf2f4a3e73
It was corrupted in r38528. The most obvious symptom is repeated messages like this:
Tue Sep 8 08:25:18 2015 kern.warn kernel: [77141.972226] br-lan: received packet on wlan0 with own address as source address
Signed-off-by: Dmitry Ivanov <dima@ubnt.com>
Backport of r46821
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46822 3c298f89-4303-0410-b956-a3cf2f4a3e73
It also uses different block size just like WGR614 V10.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46810
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46812 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46766
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46767 3c298f89-4303-0410-b956-a3cf2f4a3e73
/etc/uci-defaults/02_network had a typo, making it generate the wrong
network config.
Closes#20407.
Backport of r46727.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46728 3c298f89-4303-0410-b956-a3cf2f4a3e73
Properly treat -ENOSYS as no PHY, else ehci-orion won't work without
generic phy support.
Backport of r46711.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46712 3c298f89-4303-0410-b956-a3cf2f4a3e73
Some CFEs seem to misconfigure the mapped memory flash access with
fast read but without a dummy byte, causing all accesses to be prefixed
with 0xff.
This of course breaks reading out the nvram, so do not just move back to
single i/o accessors, but also ensure that the dummy byte is correctly
set.
Backport of r46707.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46709 3c298f89-4303-0410-b956-a3cf2f4a3e73
Thanks Sebastian for spotting it.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46698 3c298f89-4303-0410-b956-a3cf2f4a3e73
The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46691 3c298f89-4303-0410-b956-a3cf2f4a3e73
Kinda-backport of r46415, though this patch uses the old-style calibration data loading.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46673 3c298f89-4303-0410-b956-a3cf2f4a3e73
According to the info from NVRAM we should use port 8 for the CPU (and
interface eth2). Unfortunately it doesn't work right now, so lets switch
to the port 5.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46586 3c298f89-4303-0410-b956-a3cf2f4a3e73
We got check for nvram_len placed too early and the code never tried
reading CFE variables used on WGT634U. This is a regression introduced
in r45942 and reported in #20291.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r46584
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46585 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r46458 to CC
https://onion.io/omega
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: Boken Lin <bl@onion.io>
Tested-by: Jacky Huang <huangfangcheng@163.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46548 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch fixes weak radio signal reported by nikola.georgiev
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Backport of r46545
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46546 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46541
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46542 3c298f89-4303-0410-b956-a3cf2f4a3e73
Fix for default button states in WRT1900AC dts files.
This prevents overlay wipe when reset is pressed.
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46531 3c298f89-4303-0410-b956-a3cf2f4a3e73
EPG5000 uses ath79 nvram functions, but does not select it. This breaks
build if no other board support enabling nvram support is selected.
Closes#19952.
Backport of r46190.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46494 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds buttons support for Huawei EchoLife HG553.
Backport of r46388.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46486 3c298f89-4303-0410-b956-a3cf2f4a3e73
NB that wlan5g is phy0tpt and wlan2g phy1tpt.
Backport of r46226.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46450 3c298f89-4303-0410-b956-a3cf2f4a3e73
The designated blue WAN port on both devices has index 5, not 1.
Backport of r46227.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46449 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r46049.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46448 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r46048.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46447 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r46047.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46446 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r46236 to CC : add support for the Bitmain Antminer S3
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46445 3c298f89-4303-0410-b956-a3cf2f4a3e73
Set up eth0 as LAN interface by default.
Backport of r46174
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46419 3c298f89-4303-0410-b956-a3cf2f4a3e73
The AT91 SAMA5D3XPLAINED uses a KSZ9031 and a KSZ8081 that are supported
by this PHY driver.
Backport of r46171
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46416 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46410
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46411 3c298f89-4303-0410-b956-a3cf2f4a3e73
This should fix build of sunxi.
Backport of r46304
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46310 3c298f89-4303-0410-b956-a3cf2f4a3e73
Add features ext4 targz to target x86/xen_domu in order to
generate images in defconfig.
This fixes#18074.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Backport of r46233
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46277 3c298f89-4303-0410-b956-a3cf2f4a3e73
r45954 ("ar71xx: fix 100/10mbps ethernet link issues on mynet range
extender") introduced a pdata based modification of the tx_clk_dly. But it
was not checked if pdata actually existed. This caused a page fault on all
devices which didn't have at803x_platform_data specified for an at803x
based device.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
Backport of r46200
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46252 3c298f89-4303-0410-b956-a3cf2f4a3e73
Also move it to an earlier place so new boards added are less likely
to confuse quilt.
Fixes#19965.
Backport of r46148.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46153 3c298f89-4303-0410-b956-a3cf2f4a3e73
