157 Commits

Author SHA1 Message Date
Felix Fietkau
b2e35bbd7b build: unify mips target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38210 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-26 17:53:14 +00:00
Gabor Juhos
57f4da235a ramips: sync 3.10 configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38181 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-25 16:39:23 +00:00
John Crispin
f983916240 ralink: add support for dalink dcs930l ipcam
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38053 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-19 05:56:46 +00:00
John Crispin
88f6536f5b ralink: add pinctrl driver
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-17 21:45:44 +00:00
Gabor Juhos
bfe5dcd235 kernel/3.10: add new Kconfig option for firmware partition split
Add a new kernel config option for generic firmware partition
split support and change the uImage split support to depend on
the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to
MTD_SPLIT_FIRMWARE_NAME to make it more generic.

The patch is in preparation for multiple firmware format
support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@38002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-09-15 17:03:29 +00:00
John Crispin
7918a35c11 ramips: DIR-610-A1 Support
http://patchwork.openwrt.org/patch/3933/

Signed-off-by: Flavio Silveira <fggs@terra.com.br>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-14 19:35:27 +00:00
John Crispin
b9aed7de86 ramips: update v3.10 patches
Sync the patches with those sent upstream for v3.12.

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37778 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-14 18:15:15 +00:00
John Crispin
69c35b6e2b ramips: add Poray IP2202 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37640 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01 14:31:15 +00:00
John Crispin
779826d982 ramips: add Poray X8 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37639 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01 14:31:09 +00:00
John Crispin
64ad8ac32d ramips: add Poray X5/X6 Support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37638 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01 14:31:04 +00:00
John Crispin
c956dee4db ramips: add Poray M4 4M/8M support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37637 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01 14:30:58 +00:00
John Crispin
48159ba927 ramips: add Poray M3 support
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01 14:30:53 +00:00
John Crispin
9e2a11f634 ramips: add basics for Poray devices
This commit adds the basic elements to support Poray brand routers.
It contains a tool to do the encryption/obfuscation that is used in
Poray routers.

Support for Poray devices was worked on by:

Felix Kaechele <heffer@fedoraproject.org>
Luis Soltero <lsoltero@globalmarinenet.com>
Michel Stempin <michel.stempin@wanadoo.fr>

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37635 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-08-01 14:30:46 +00:00
John Crispin
8b30c849c3 ramips: add MPR-A1 support
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-27 09:23:52 +00:00
John Crispin
b1b1632c29 ramips: enable usb phy support on rt5350
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-27 09:23:29 +00:00
John Crispin
60199db337 ralink: switch back to dwc_otg ... dwc2 seems to not work well with 3G modems
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37563 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-27 09:23:24 +00:00
John Crispin
97454aa7aa ramips: Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board.
Basic support for the AsiaRF RT5350 based AWM002 module and evaluation board.
http://www.asiarf.com/Smallest-Tiny-Ralink-802-11n-Wireless-AP-Router-Module-Board-AWM002-product-view-375.html

Signed-off-by Jon Smirl <jonsmirl@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-24 08:54:41 +00:00
John Crispin
a6fc8d2e4d ramips: Add support for Huawei HG255D in trunk
HG255D is a kind of popular low-end home gateway in China, this patch bring the the trunk support for it. It is adapted from a local Chinese community (www.right.com.cn), so credit should given to them.

This patch is tested to work except trivial LED issues.

Signed-off-by: Leon Xu <ylxu72@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37505 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-22 15:36:39 +00:00
John Crispin
823b8cfc5f ralink: set remove dwc_otg from default packages and use dwc2 instead
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37499 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-22 13:52:52 +00:00
Jonas Gorski
184460f01e kernel: move CONFIG_NET_IP_TUNNEL to generic
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37465 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-19 22:58:01 +00:00
John Crispin
0b4bd54afb ramips: add ralink v3.10 support
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-15 10:06:55 +00:00
John Crispin
24f20fee78 ramips: disable ill_acc driver by default
The driver seems to be causoing boot rpoblems on some SoCs

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37314 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 18:01:00 +00:00
John Crispin
d4b8b8d62f ralink: drop v3.8 support
Signed-off-by: John Crispin <blogic@opewnrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37311 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-07-14 18:00:34 +00:00
John Crispin
5f6caa26e5 ralink: update patches
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-23 15:50:49 +00:00
John Crispin
ecb32a2174 ramips: add HAME MPR-A2 support
This patch adds support for HAME MPR-A2 router using a DTS file.
The platform is Ralink RT5350.
http://wiki.openwrt.org/toh/hame/mpr-a2

Signed-off-by: Dmitry Shmygov <shmygov@rambler.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-10 08:24:56 +00:00
John Crispin
a4e76e8e46 ramips: add support for belkin F7C027 wemo/homeautomatisation plug
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-10 08:24:50 +00:00
John Crispin
c12c2b84a2 ramips: set correct description for rt305x subtarget
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36775 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-30 15:59:56 +00:00
Jonas Gorski
c3152edcbd kernel: move CONFIG_MIPS_SEAD3 to generic
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36617 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-12 21:41:55 +00:00
John Crispin
e5d66838cf ramips: drop 3.7 support
Signed-off-by; John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36572 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-07 10:58:44 +00:00
John Crispin
3ea1a86b5d ramips: properly setup the FEATURES variable
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36571 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-07 10:58:30 +00:00
John Crispin
3bc8d0be4a ramips: enable dsp extensions for rt305x and rt3883
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06 16:45:59 +00:00
John Crispin
741c702de8 ramips: Update ARC Freestation profile
These devices are actually built around the 8devices Carambola dev board.

ARC FreeStation, Flex mARC, iFlex, and SplitStation devices are
supported with this image, see "ARCFlex Firmware Downloads":
http://www.antennas.com/wiki/index.php?title=ARC-OS_Firmware_Downloads_and_Revision_History

Funnily enough if present the external USB wlan ends up being wlan-0, with the
SoC device being wlan-1.

- Invert port map so special handling of vlan config can be removed.
- Add LED config similar to original ArcOS firmware.
- Add GPIO export for enabling PoE passthrough from ethernet port 0 to port 1
- Get MACs from factory partition.
- Update description to list supported devices.
- Carambola uses RT3050 (not RT3052), though my Carambola CPU
  actually reports itself as being an RT3350 while still having
  RT3050F markings.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36564 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-05-06 16:45:35 +00:00
John Crispin
7c6b0f4953 ramips: move dlink profile to correct sub folder - 2nd try
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36489 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30 10:34:20 +00:00
John Crispin
ee51015692 ramips: move dlink profile to correct sub folder
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-30 08:24:26 +00:00
John Crispin
ecff443b65 ramips: introduce DTS for ALL5003
Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36435 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:03:01 +00:00
John Crispin
77dd775839 ramips: Add Alpha ASL-26555 support.
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.

There are two versions (Chile 8MB and Spain 16MB).

Wiki: http://wiki.openwrt.org/toh/alpha/asl26555

Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-25 19:02:53 +00:00
John Crispin
37b08bf005 [ramips] fix ALL5002 default package selection
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36175 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 10:00:16 +00:00
John Crispin
e97253bd46 [ramips] fix upvel profile names
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36167 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:41 +00:00
John Crispin
800132d77e [ramips] fix rt305x config-3.8
Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36165 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-03 09:59:33 +00:00
Gabor Juhos
90c84fd003 ramips: add profile and build image for the Upvel UR-326N4G board
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35972 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 21:02:45 +00:00
Gabor Juhos
1a059fb489 ramips: add kernel support for the Upvel UR-326N4G board
[juhosg: add missing symbols to config-3.{7,8}]

Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35970 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-11 21:02:40 +00:00
Gabor Juhos
ba05322e57 ramips: set -march=24kec for rt305x and rt3883 to enable use of DSP extension
All known rt305x and rt3883 implementations support at
least the 24kec instruction set which includes the DSP
extension. For rt288x, the previous value mips32r2 is
kept.

The cpu target is now set per sub-archtecture, according
to cpu-feature-overrides.h of each SoC family.

[juhosg: define ARCH_PACKAGES variable for rt305x/rt3883
in order to differentiate the packages compiled with
the 24Kec option.]

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35853 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-03-03 12:47:31 +00:00
Gabor Juhos
2a72ee4515 ramips: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35801 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-25 21:28:42 +00:00
Gabor Juhos
850321b03d ramips: add kernel support for the Edimax BR-6425 board
Signed-off-by: Yuval Adam <yuv.adm@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-02 17:01:47 +00:00
Gabor Juhos
7812da82f6 refresh kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-01 17:28:40 +00:00
Gabor Juhos
c2aebc74ad ramips: add profile and build image for the Tenda 3G300M
Factory image should be used to flash from
original firmware.

[juhosg: use the GENERIC_4M template]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35246 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19 17:05:07 +00:00
Gabor Juhos
aa18b01e2e ramips: add kernel support for the Tenda 3G300M
Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons
and seven leds.

Factory image should be used to flash from original firmware.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35244 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-19 17:05:03 +00:00
Gabor Juhos
ee1ef38cc9 ramips: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-01-12 12:25:30 +00:00
Gabor Juhos
bff7d5f388 ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router
This is a Japanese market router, for details check
http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB
RAM, but base OpenWRT install worked fine for days without issues.
Even an image with built-in Luci worked, but don't expect smooth
experience, due to the lack of RAM. Wifi was not extensively tested,
but seems it is working. GPIO LEDs & buttons, factory flash image and
switch config are confirmed working. Tested against revision 34882 +
this patch.

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-29 17:50:35 +00:00
Gabor Juhos
fe3c9a045f ramips: rt305x: add kernel support for AirLive AIR3GII
AirLive AIR3GII is Ralink RT5350F based device with
100Mbps switch, USB port, 4MB flash and 32MB ram.

Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade
Does not work: wifi (chip RT5350), reset button

[   13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected.
[   13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.

Other problem: LAN leds is reverse (lights when not cable
connected and vice versa)

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-29 17:50:28 +00:00