Felix Fietkau b8de0b2ee1 ramips: change ethernet napi interrupt sequence ...

when open device. first ready napi software rx.
then enable hardware interrupt.
final start software tx queue to send data.

Signed-off-by: michael lee <igvtee@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45894 3c298f89-4303-0410-b956-a3cf2f4a3e73

2015-06-05 08:59:48 +00:00

..

base-files

ramips: extract MAC address on WHR-300HP2, WHR-1166D, WHR-600D

2015-05-29 21:42:06 +00:00

dts

ramips: fix the memory map on FireWRT

2015-06-05 08:07:41 +00:00

files

ramips: change ethernet napi interrupt sequence

2015-06-05 08:59:48 +00:00

image

ramips: fix imagebuilder

2015-05-29 11:28:10 +00:00

mt7620

ramips: diable ill_acc driver by default

2015-05-27 20:02:04 +00:00

mt7621

ramips: enable highmem support for mt7621

2015-06-04 21:45:12 +00:00

mt7628

ramips: diable ill_acc driver by default

2015-05-27 20:02:04 +00:00

patches-3.18

ramips: enable highmem support for mt7621

2015-06-04 21:45:12 +00:00

rt288x

ramips: diable ill_acc driver by default

2015-05-27 20:02:04 +00:00

rt305x

ramips: diable ill_acc driver by default

2015-05-27 20:02:04 +00:00

rt3883

ramips: diable ill_acc driver by default

2015-05-27 20:02:04 +00:00

base-files.mk

ramips: remove default network configuration, and generate that from uci-defaults

2011-12-01 22:48:51 +00:00

Makefile

ralink: bump to v3.18

2015-02-19 14:04:47 +00:00

modules.mk

ralink: MT7621 add i2c controller driver

2015-03-12 10:06:17 +00:00