-- F-15C Export -- Version 1.0.0 BETA ExportScript.FoundFCModule = true -- auxiliary function dofile(ExportScript.Config.ExportModulePath.."FC_AuxiliaryFuntions.lua") ----------------------------------------- -- FLAMING CLIFFS AIRCRAFT / F-15C -- -- FC aircraft don't support GetDevice -- ----------------------------------------- function ExportScript.ProcessIkarusFCHighImportanceConfig() local lFunctionTyp = "Ikarus" -- function type for shared function local myData = LoGetSelfData() if (myData) then local lLatitude = myData.LatLongAlt.Lat -- LATITUDE local lLongitude = myData.LatLongAlt.Long -- LONGITUDE local lBasicAtmospherePressure = LoGetBasicAtmospherePressure() -- BAROMETRIC PRESSURE local lAltBar = LoGetAltitudeAboveSeaLevel() -- ALTITUDE SEA LEVEL (Meter) local lEngineRPMleft = LoGetEngineInfo().RPM.left -- ENG1 RPM % local lEngineRPMright = LoGetEngineInfo().RPM.right -- ENG2 RPM % local lEngineTempLeft = LoGetEngineInfo().Temperature.left -- ENG1 EGT ºC local lEngineTempRight = LoGetEngineInfo().Temperature.right -- ENG2 EGT ºC local lIAS = LoGetIndicatedAirSpeed() -- INDICATED AIRSPEED (Meter/Second) local lMachNumber = LoGetMachNumber() -- MACH local lAoA = LoGetAngleOfAttack() -- ANGLE OF ATTACK AoA (Radian) local lAccelerationUnits = LoGetAccelerationUnits().y -- G-LOAD local lEngineFuelConsumptionLeft = LoGetEngineInfo().FuelConsumption.left local lEngineFuelConsumptionRight = LoGetEngineInfo().FuelConsumption.right local lEngineHydraulicPressureLeft = LoGetEngineInfo().HydraulicPressure.left local lEngineHydraulicPressureRight = LoGetEngineInfo().HydraulicPressure.right --[[ local lAltRad = LoGetAltitudeAboveGroundLevel() -- ALTITUDE GROUND LEVEL (Meter) local lTrueAirSpeed = LoGetTrueAirSpeed() -- TRUE AIRSPEED (Meter/Second) local lPitch, lBank, lYaw = LoGetADIPitchBankYaw() -- PITCH, BANK, YAW (Radian) local lHeading = myData.Heading -- HEADING (Radian) local lVVI = LoGetVerticalVelocity() -- VERTICAL SPEED (Meter/Second) local lGlide = LoGetGlideDeviation() -- VOR1 HORIZONTAL DEFLECTION (-1 +1) local lSide = LoGetSideDeviation() -- VOR1 VERTICAL DEFLECTION (-1 +1) local lSlipBallPosition = LoGetSlipBallPosition() -- SLIP BALL (-1 +1) local lNavInfoPitch = LoGetNavigationInfo().Requirements.pitch -- AP REQUIRED PITCH (Radian) local lNavInfoRoll = LoGetNavigationInfo().Requirements.roll -- AP REQUIRED BANK (Radian) local lNavInfoSpeed = LoGetNavigationInfo().Requirements.speed -- AP SPEED (Meter/Second) local lNavInfoAltitude = LoGetNavigationInfo().Requirements.altitude -- AP ALTITUDE (Meter) local lNavInfoVerticalSpeed = LoGetNavigationInfo().Requirements.vertical_speed -- AP VERTICAL SPEED (Meter/Second) local lControlPanel_HSI = LoGetControlPanel_HSI() -- HSI Data local lHSI_RMI = LoGetControlPanel_HSI().RMI_raw -- VOR1 OBS (Radian) local lHSI_ADF = LoGetControlPanel_HSI().ADF_raw -- ADF OBS (Radian) local lHSI_Heading = LoGetControlPanel_HSI().Heading_raw -- Heading (Radian) local lEngineFuelInternal = LoGetEngineInfo().fuel_internal -- TANK1 (INT) (KG) local lEngineFuelExternal = LoGetEngineInfo().fuel_external -- TANK2 (EXT) (KG) local lMechInfo = LoGetMechInfo() -- mechanical components, e.g. Flaps, Wheelbrakes,... local lPayloadInfo = LoGetPayloadInfo() -- Paylod, e.g. bombs, guns, rockets, fuel tanks,... ]] local lDistanceToWay = 999 local lRoute = LoGetRoute() if (myData and lRoute) then -- if neither are nil local myLoc = LoGeoCoordinatesToLoCoordinates(lLongitude, lLatitude) --lDistanceToWay = math.sqrt((myLoc.x - lRoute.goto_point.world_point.x)^2 + (myLoc.y - lRoute.goto_point.world_point.y)^2) lDistanceToWay = math.sqrt((myLoc.x - lRoute.goto_point.world_point.x)^2 + (myLoc.z - lRoute.goto_point.world_point.z)^2) end -- ADI ExportScript.AF.FC_US_ADI() -- ID 1 to 10 -- HSI ExportScript.AF.FC_US_HSI(lDistanceToWay) -- ID 11 to 23 -- VVI ExportScript.AF.FC_US_VVI() -- ID 24 -- G-LOAD ExportScript.AF.FC_US_GLOAD() -- ID 25 to 27 -- Clock ExportScript.AF.FC_US_Clock() -- ID 28 to 30 -- Standby Compass ExportScript.AF.FC_US_Compass() -- ID 31 to 33 -- Standby ADI ExportScript.AF.FC_US_stbyADI() -- ID 34, 35 -- Barometrisic Altimeter --local lAltCounter = {[0] = 0.0, [1] = 0.11, [2] = 0.22, [3] = 0.33, [4] = 0.44, [5] = 0.55, [6] = 0.66, [7] = 0.77, [8] = 0.88, [9] = 0.99} local lAltCounter = {[0] = 0.0, [1] = 0.1, [2] = 0.2, [3] = 0.3, [4] = 0.4, [5] = 0.5, [6] = 0.6, [7] = 0.7, [8] = 0.8, [9] = 0.9} --local lAltBarTmp2 = string.format("%03d", ((lAltBar * 3.28084) / 100)) -- meter to feeds lAltBar = lAltBar - (9.5 * (760 - lBasicAtmospherePressure)) -- 9.5 m per 1mmHg difference --lAltBar = lAltBar + (9.5 * (760 - lBasicAtmospherePressure)) -- 9.5 m per 1mmHg difference local lAltBarTmp = lAltBar * 3.28084 -- meter to feeds local lAltBarTmp2 = ((lAltBar * 3.28084) / 100) -- meter to feeds lAltBarTmp = lAltBarTmp / 1000 lAltBarTmp = lAltBarTmp - ExportScript.Tools.round(lAltBarTmp, 0, "floor") local lAltCounter1 = 0 local lAltCounter2 = 0 local lAltCounter3 = 0 local lAltCounter4 = 0 local lAltBarTmp3 = string.format("%03d", lAltBarTmp2) lAltCounter4 = lAltBarTmp * 10 if lAltCounter4 > 1.0 then lAltCounter4 = lAltCounter4 - ExportScript.Tools.round(lAltCounter4, 0, "floor") end -- AltBar {0.0,1.0} -- AltBar_10000 {0.0,1.0} -- AltBar_1000 {0.0,1.0} -- AltBar_100 {0.0,1.0} -- AltBar_10 {0.0,1.0} ExportScript.Tools.SendData(36, lAltBarTmp) ExportScript.Tools.SendData(37, lAltCounter[tonumber(string.sub(lAltBarTmp3, 1, 1))]) ExportScript.Tools.SendData(38, lAltCounter[tonumber(string.sub(lAltBarTmp3, 2, 2))]) ExportScript.Tools.SendData(39, lAltCounter[tonumber(string.sub(lAltBarTmp3, 3, 3))]) ExportScript.Tools.SendData(40, lAltCounter4) -- Barometrisic Altimeter end -- Air Speed Indicator (IAS, Mach) --[[ y_min = 0.0 -- minimaler Ausgabewert y_max = 1.0 -- maximaler Ausgabewert x_min = 0.0 -- minimaler Eingangswert x_max = 514,44444443999953012349519517095 -- maximaler Eingangswert x = 257.0 -- aktueller Eingangswert d_y = 1.0 -- Delta Ausgabewerte (y_max - y_min) d_x = 514,44444443999953012349519517095 -- Delta Eingangswerte (x_max - x_min) m = 0.0019438444924574 -- Steigung der linearen Funktion (d_y / d_x) n = 0.0 -- Schnittpunkt der Funktion mit y-Achse (y_max - m * x_max) y = 0.4995680345615518 -- Ergebnis (m * x + n) ]] lIAS = 0.0019438444924574 * lIAS if lMachNumber < 1.01 then --[[ y_min = 0.0 0.1 -- minimaler Ausgabewert y_max = 0.1 1.0 -- maximaler Ausgabewert x_min = 0.0 1.0 -- minimaler Eingangswert x_max = 1.0 3.6 -- maximaler Eingangswert x = 0.5 2.0 -- aktueller Eingangswert d_y = 0.1 0.9 -- Delta Ausgabewerte (y_max - y_min) d_x = 1.0 2.6 -- Delta Eingangswerte (x_max - x_min) m = 0.1 0.34615384615384615384615384615385 -- Steigung der linearen Funktion (d_y / d_x) n = 0.0 -0.24615384615384615384615384615385 -- Schnittpunkt der Funktion mit y-Achse (y_max - m * x_max) y = 0.05 0.44615384615384615384615384615384 -- Ergebnis (m * x + n) ]] lMachNumber = 0.1 * lMachNumber else lMachNumber = 0.34615384615384615384615384615385 * lMachNumber + -0.24615384615384615384615384615385 end -- IAS {0.0,1.0} -- MachNumber --SendData(2, string.format("%.4f;%.4f", lIAS, lMachNumber)) ExportScript.Tools.SendData(44, string.format("%.4f", lIAS)) ExportScript.Tools.SendData(45, string.format("%.4f", lMachNumber)) -- Air Speed Indicator End -- RPM Engine Left ExportScript.AF.FC_OneNeedleGauge(lEngineRPMleft, 110, 46) -- RPM Engine Right ExportScript.AF.FC_OneNeedleGauge(lEngineRPMright, 110, 47) -- Oil Pressure Left, no value but similar to Engine RPM --[[ y_min = 0.0 0.76 -- minimaler Ausgabewert y_max = 0.76 1.0 -- maximaler Ausgabewert x_min = 0.0 74.0 -- minimaler Eingangswert x_max = 74.0 95.0 -- maximaler Eingangswert x = 74.0 90.0 -- aktueller Eingangswert d_y = 0.76 0.24 -- Delta Ausgabewerte (y_max - y_min) d_x = 74.0 21.0 -- Delta Eingangswerte (x_max - x_min) m = 0.01027027027027027027027027027027 0.01142857142857142857142857142857 -- Steigung der linearen Funktion (d_y / d_x) n = 0.0 -0.08571428571428571428571428571415 -- Schnittpunkt der Funktion mit y-Achse (y_max - m * x_max) y = 0.7599999 0.943-- Ergebnis (m * x + n) ]] if lEngineRPMleft < 74 then ExportScript.AF.FC_OneNeedleGauge(1.027027027027027027027027027027 * lEngineRPMleft, 100, 48) else ExportScript.AF.FC_OneNeedleGauge(1.142857142857142857142857142857 * lEngineRPMleft + -8.571428571428571428571428571415, 100, 48) end -- Oil Pressure Right, no value but similar to Engine RPM if lEngineRPMright < 74 then ExportScript.AF.FC_OneNeedleGauge(1.027027027027027027027027027027 * lEngineRPMright, 100, 49) else ExportScript.AF.FC_OneNeedleGauge(1.142857142857142857142857142857 * lEngineRPMright + -8.571428571428571428571428571415, 100, 49) end -- Engine Exhaust Nozzle Position Indicator Left, very imprecise --[[ y_min = 0.0 -- minimaler Ausgabewert y_max = 0.76 -- maximaler Ausgabewert x_min = 95.0 -- minimaler Eingangswert x_max = 96.0 -- maximaler Eingangswert x = 95.5 -- aktueller Eingangswert d_y = 0.76 -- Delta Ausgabewerte (y_max - y_min) d_x = 1.0 -- Delta Eingangswerte (x_max - x_min) m = 0.76 -- Steigung der linearen Funktion (d_y / d_x) n = -72.2 -- Schnittpunkt der Funktion mit y-Achse (y_max - m * x_max) y = 0.5 -- Ergebnis (m * x + n) ]] if lEngineRPMleft > 95.0 then ExportScript.AF.FC_OneNeedleGauge((0.76 * lEngineRPMleft + -72.2) * 100, 100, 50) else ExportScript.AF.FC_OneNeedleGauge(0, 100, 50) end -- Engine Exhaust Nozzle Position Indicator Right, very imprecise if lEngineRPMright > 95.0 then ExportScript.AF.FC_OneNeedleGauge((0.76 * lEngineRPMright + -72.2) * 100, 100, 51) else ExportScript.AF.FC_OneNeedleGauge(0, 100, 51) end -- Exaust Gas Temperature Left ExportScript.AF.FC_F15C_ExaustGasTemp(lEngineTempLeft - 1.4, 52, 53, 54, 55) -- Exaust Gas Temperature Right ExportScript.AF.FC_F15C_ExaustGasTemp(lEngineTempRight - 1.4, 56, 57, 58, 59) -- Fuel Flow Left ExportScript.AF.FC_OneNeedleGauge3Digits(((lEngineFuelConsumptionLeft * 2.2046223302272) * 3600), 10000, 2, 60, 61, 62, 63) -- Fuel Flow Right ExportScript.AF.FC_OneNeedleGauge3Digits(((lEngineFuelConsumptionRight * 2.2046223302272) * 3600), 10000, 2, 64, 65, 66, 67) -- Hydraulic Pressure Left ExportScript.AF.FC_OneNeedleGauge(lEngineHydraulicPressureLeft, 100, 68) -- Hydraulic Pressure Right ExportScript.AF.FC_OneNeedleGauge(lEngineHydraulicPressureRight, 100, 69) -- AOA --FC_US_AOA(16) --ExportScript.Tools.WriteToLog('lAoA 1: '..ExportScript.Tools.dump(lAoA)) --local lAoATmp = math.deg(lAoA) + 10 --ExportScript.Tools.WriteToLog('lAoA 2: '..ExportScript.Tools.dump(lAoATmp)) --[[ y_min = 0.0 -- minimaler Ausgabewert y_max = 1.0 -- maximaler Ausgabewert x_min = 0.0 -- minimaler Eingangswert x_max = 45.0 -- maximaler Eingangswert x = 12.6 -- aktueller Eingangswert d_y = 1.0 -- Delta Ausgabewerte (y_max - y_min) d_x = 45.0 -- Delta Eingangswerte (x_max - x_min) m = 0.02222222222222222222222222222222 -- Steigung der linearen Funktion (d_y / d_x) n = 0.0000000000000000000000000000001 -- Schnittpunkt der Funktion mit y-Achse (y_max - m * x_max) y = 0.2800000000000000000000000000001 -- Ergebnis (m * x + n) ]] --lAoATmp = 0.02222222222222222222222222222222 * lAoATmp + 0.0000000000000000000000000000001 --SendData(16, string.format("%.4f;%d", lAoATmp, 0) ) if lAoA > 0.0 then -- positive AOA --[[ y_min = 0.33 -- minimaler Ausgabewert y_max = 1.0 -- maximaler Ausgabewert x_min = 0.0 -- minimaler Eingangswert x_max = 30.0 -- maximaler Eingangswert x = 12.6 -- aktueller Eingangswert d_y = 0.67 -- Delta Ausgabewerte (y_max - y_min) d_x = 30.0 -- Delta Eingangswerte (x_max - x_min) m = 0.02233333333333333333333333333333 -- Steigung der linearen Funktion (d_y / d_x) n = 0.33 -- Schnittpunkt der Funktion mit y-Achse (y_max - m * x_max) y = 0.6114 -- Ergebnis (m * x + n) ]] lAoA = 0.02228571428571428571428571428571 * lAoA + 0.33 else --[[ y_min = 0.0 -- minimaler Ausgabewert y_max = 0.33 -- maximaler Ausgabewert x_min = 0.0 -- minimaler Eingangswert x_max = -10.0 -- maximaler Eingangswert x = -2.6 -- aktueller Eingangswert d_y = 0.33 -- Delta Ausgabewerte (y_max - y_min) d_x = -10.0 -- Delta Eingangswerte (x_max - x_min) m = -0.033 -- Steigung der linearen Funktion (d_y / d_x) n = 0.0 -- Schnittpunkt der Funktion mit y-Achse (y_max - m * x_max) y = 0.2442 -- Ergebnis 0.33 - (m * x + n) ]] --lAoA = 0.22 - (-0.022 * lAoA) lAoA = 0.33 - (-0.033 * lAoA) end ExportScript.Tools.SendData(70, string.format("%.4f", lAoA)) ExportScript.Tools.SendData(0, 0) -- AOA Off Flag off -- AOA End -- Hydraulic Pressure Util, no value but similar to Engine Hydraulic Pressure (left or right) local lEngineHydraulicPressure = lEngineHydraulicPressureLeft lEngineHydraulicPressure = lEngineHydraulicPressureRight > lEngineHydraulicPressureLeft and lEngineHydraulicPressureRight or lEngineHydraulicPressureLeft ExportScript.AF.FC_OneNeedleGauge(lEngineHydraulicPressure, 100, 71) -- Standby Air Speed Indicator (IAS, Mach) -- value has been calculated (from top) -- IAS {0.0,1.0} ExportScript.Tools.SendData(72, string.format("%.4f", lIAS)) -- Standby Air Speed Indicator End -- AccelerationUnits --ExportScript.Tools.WriteToLog("lAccelerationUnits: "..ExportScript.Tools.dump(lAccelerationUnits)) if lAccelerationUnits > 0.0 then -- positive AccelerationUnits --[[ y_min = 0.333 -- minimaler Ausgabewert y_max = 1.0 -- maximaler Ausgabewert x_min = 0.0 -- minimaler Eingangswert x_max = 10.0 -- maximaler Eingangswert x = 2.6 -- aktueller Eingangswert d_y = 0.667 -- Delta Ausgabewerte (y_max - y_min) d_x = 10.0 -- Delta Eingangswerte (x_max - x_min) m = 0.0667 -- Steigung der linearen Funktion (d_y / d_x) n = 0.333 -- Schnittpunkt der Funktion mit y-Achse (y_max - m * x_max) y = 0.50642 -- Ergebnis (m * x + n) ]] lAccelerationUnits = 0.0667 * lAccelerationUnits + 0.333 else --[[ y_min = 0.0 -- minimaler Ausgabewert y_max = 0.333 -- maximaler Ausgabewert x_min = 0.0 -- minimaler Eingangswert x_max = -5.0 -- maximaler Eingangswert x = -2.6 -- aktueller Eingangswert d_y = 0.333 -- Delta Ausgabewerte (y_max - y_min) d_x = -5.0 -- Delta Eingangswerte (x_max - x_min) m = -0.0666 -- Steigung der linearen Funktion (d_y / d_x) n = 0.666 -- Schnittpunkt der Funktion mit y-Achse (y_max - m * x_max) y = 0.17316 -- Ergebnis 0.666 - (m * x + n) ]] lAccelerationUnits = 0.666 - (-0.0666 * lAccelerationUnits + 0.666) end ExportScript.Tools.SendData(73, string.format("%.4f", lAccelerationUnits)) -- AccelerationUnits End -- Standby Barometrisic Altimeter --lAltBarTmp = lAltBar - (9.5 * (760 - lBasicAtmospherePressure)) -- 9.5 m per 1mmHg difference, has been calculated lAltBarTmp = lAltBar * 3.28084 -- meter to feeds local AltBar_kilofeet_needle = 0 local AltBar_hektofeet_needle = 0 local AltBar_dafeet_needle = 0 if lAltBarTmp > 1000 then AltBar_kilofeet_needle = lAltBarTmp / 10000 end if lAltBarTmp > 10000 then AltBar_hektofeet_needle = (lAltBarTmp - (ExportScript.Tools.round(lAltBarTmp / 10000, 0, "floor") * 10000)) / 1000 else AltBar_hektofeet_needle = lAltBarTmp / 1000 end if lAltBarTmp > 1000 then AltBar_dafeet_needle = (lAltBarTmp - (ExportScript.Tools.round(lAltBarTmp / 1000, 0, "floor") * 1000)) / 100 else AltBar_dafeet_needle = lAltBarTmp / 100 end --[[ y_min = 0.0 -- minimaler Ausgabewert y_max = 1.0 -- maximaler Ausgabewert x_min = 0.0 -- minimaler Eingangswert x_max = 10.0 -- maximaler Eingangswert x = 2.5 -- aktueller Eingangswert d_y = 1.0 -- Delta Ausgabewerte (y_max - y_min) d_x = 10.0 -- Delta Eingangswerte (x_max - x_min) m = 0.1 -- Steigung der linearen Funktion (d_y / d_x) n = 0.0 -- Schnittpunkt der Funktion mit y-Achse (y_max - m * x_max) y = 0.25 -- Ergebnis (m * x + n) ]] AltBar_kilofeet_needle = 0.1 * AltBar_kilofeet_needle AltBar_hektofeet_needle = 0.1 * AltBar_hektofeet_needle AltBar_dafeet_needle = 0.1 * AltBar_dafeet_needle -- AltBar_kilofeet_needle {0.0,1.0} -- AltBar_hektofeet_needle {0.0,1.0} -- AltBar_dafeet_needle {0.0,1.0} ExportScript.Tools.SendData(41, string.format("%.4f", AltBar_kilofeet_needle)) ExportScript.Tools.SendData(42, string.format("%.4f", AltBar_hektofeet_needle)) ExportScript.Tools.SendData(43, string.format("%.4f", AltBar_dafeet_needle)) -- Standby Barometrisic Altimeter end ExportScript.AF.FlareChaff(lFunctionTyp) else ExportScript.Tools.WriteToLog("Unknown FC Error, no LoGetSelfData.") end end function ExportScript.ProcessDACConfigHighImportance() local lFunctionTyp = "DAC" -- function type for shared function -- your script ExportScript.AF.FlareChaff(lFunctionTyp) end function ExportScript.ProcessIkarusFCLowImportanceConfig() local lFunctionTyp = "Ikarus" -- function type for shared function -- Gear Lamps ExportScript.AF.MechanicalDevicesIndicator(lFunctionTyp) ExportScript.AF.FuelQuantityIndicator(lFunctionTyp) ExportScript.AF.SightingSystem(lFunctionTyp) ExportScript.AF.StatusLamp(lFunctionTyp) ExportScript.AF.RWRlite(lFunctionTyp) end function ExportScript.ProcessDACConfigLowImportance() local lFunctionTyp = "DAC" -- function type for shared function ExportScript.AF.MechanicalDevicesIndicator(lFunctionTyp) ExportScript.AF.FuelQuantityIndicator(lFunctionTyp) ExportScript.AF.SightingSystem(lFunctionTyp) ExportScript.AF.StatusLamp(lFunctionTyp) ExportScript.AF.WeaponStatusPanel(lFunctionTyp) ExportScript.AF.RWRlite(lFunctionTyp) end ----------------------------- -- Custom functions -- ----------------------------- function ExportScript.AF.SightingSystem(FunctionTyp) local lSightingSystemInfo = LoGetSightingSystemInfo() local lFunctionTyp = FunctionTyp or "Ikarus" if lSightingSystemInfo == nil then return end --ExportScript.Tools.WriteToLog('lSightingSystemInfo: '..ExportScript.Tools.dump(lSightingSystemInfo)9 --[[ [PRF] = { [selection] = string: "ILV" [current] = string: "MED" } [laser_on] = boolean: "false" [scale] = { [azimuth] = number: "0.52359873056412" [distance] = number: "10000" } [radar_on] = boolean: "false" [optical_system_on] = boolean: "false" [LaunchAuthorized] = boolean: "false" [ECM_on] = boolean: "false" [Manufacturer] = string: "RUS" [TDC] = { [y] = number: "0" [x] = number: "0" } [ScanZone] = { [coverage_H] = { [min] = number: "0" [max] = number: "20000" } [size] = { [azimuth] = number: "1.0471974611282" [elevation] = number: "0.17453290522099" } [position] = { [exceeding_manual] = number: "0" [distance_manual] = number: "0" [azimuth] = number: "0" [elevation] = number: "0" } } ]] if ExportScript.Config.IkarusExport and lFunctionTyp == "Ikarus" then ExportScript.Tools.SendData(600, lSightingSystemInfo.ECM_on == true and 1 or 0 ) --ExportScript.Tools.SendData(601, lSightingSystemInfo.laser_on == true and 1 or 0 ) --ExportScript.Tools.SendData(602, lSightingSystemInfo.optical_system_on == true and 1 or 0 ) ExportScript.Tools.SendData(603, lSightingSystemInfo.LaunchAuthorized == true and 1 or 0 ) ExportScript.Tools.SendData(604, lSightingSystemInfo.radar_on == true and 1 or 0 ) end if ExportScript.Config.DACExport and lFunctionTyp == "DAC" then ExportScript.Tools.SendDataDAC(600, lSightingSystemInfo.ECM_on == true and 1 or 0 ) --ExportScript.Tools.SendDataDAC(601, lSightingSystemInfo.laser_on == true and 1 or 0 ) --ExportScript.Tools.SendDataDAC(602, lSightingSystemInfo.optical_system_on == true and 1 or 0 ) ExportScript.Tools.SendDataDAC(603, lSightingSystemInfo.LaunchAuthorized == true and 1 or 0 ) ExportScript.Tools.SendDataDAC(604, lSightingSystemInfo.radar_on == true and 1 or 0 ) end end function ExportScript.AF.FuelQuantityIndicator(FunctionTyp) local lFunctionTyp = FunctionTyp or "Ikarus" -- Fuel quantity shows the fuel remaining in all tanks local lEngineInfo = LoGetEngineInfo() if lEngineInfo == nil then return end --ExportScript.Tools.WriteToLog('lEngineInfo: '..ExportScript.Tools.dump(lEngineInfo)) --[[ [fuel_external] = number: "0" [Temperature] = { [left] = number: "626.99444580078" [right] = number: "626.99444580078" } [RPM] = { [left] = number: "87.453765869141" [right] = number: "87.453758239746" } [FuelConsumption] = { [left] = number: "0.1500396137767" [right] = number: "0.1500396137767" } [fuel_internal] = number: "3773.2749023438" [EngineStart] = { [left] = number: "0" [right] = number: "0" } [HydraulicPressure] = { [left] = number: "210" [right] = number: "210" } lPayloadInfo.Stations[8].CLSID == E8D4652F-FD48-45B7-BA5B-2AE05BB5A9CF -- ext 800l Fuel Tank ]] local lEngineFuelTotal = (lEngineInfo.fuel_internal + lEngineInfo.fuel_external) * 2.2046223302272 -- kg to lbs local lFuelNeedle = lEngineFuelTotal / 12000 -- 12000 = scala lFuelNeedle = (lFuelNeedle > 1.0 and 1.0 or lFuelNeedle) local lFuelCounterLeft = 1200 local lFuelCounterRight = 1500 if lEngineInfo.RPM.left > 0 then if lEngineInfo.RPM.right > 0 then if lEngineFuelTotal < 2700 then lFuelCounterLeft = lEngineFuelTotal * 0.44444444444444444444444444444444 end else if lEngineFuelTotal < 1200 then lFuelCounterLeft = lEngineFuelTotal end end end if lEngineInfo.RPM.right > 0 then if lEngineInfo.RPM.left > 0 then if lEngineFuelTotal < 2700 then lFuelCounterRight = lEngineFuelTotal * 0.55555555555555555555555555555556 end else if lEngineFuelTotal < 1500 then lFuelCounterRight = lEngineFuelTotal end end end if ExportScript.Config.IkarusExport and lFunctionTyp == "Ikarus" then ExportScript.Tools.SendData(300, string.format("%d", lFuelCounterLeft)) -- Left Fuel ExportScript.Tools.SendData(301, string.format("%d", lFuelCounterRight)) -- Right Fuel ExportScript.Tools.SendData(302, string.format("%d", lEngineFuelTotal)) -- Total Fuel ExportScript.Tools.SendData(303, string.format("%.4f", lFuelNeedle)) -- Needle end if ExportScript.Config.DACExport and lFunctionTyp == "DAC" then ExportScript.Tools.SendDataDAC(300, string.format("%d", lFuelCounterLeft)) -- Left Fuel ExportScript.Tools.SendDataDAC(301, string.format("%d", lFuelCounterRight)) -- Right Fuel ExportScript.Tools.SendDataDAC(302, string.format("%d", lEngineFuelTotal)) -- Total Fuel end end function ExportScript.AF.StatusLamp(FunctionTyp) local lFunctionTyp = FunctionTyp or "Ikarus" local lMCPState = LoGetMCPState() -- Warning Lights if lMCPState == nil then return end ExportScript.Tools.WriteToLog('lMCPState: '..ExportScript.Tools.dump(lMCPState)) --[[ [RightTailPlaneFailure] = boolean: "false" [EOSFailure] = boolean: "false" [ECMFailure] = boolean: "false" [RightAileronFailure] = boolean: "false" [MasterWarning] = boolean: "false" [RightEngineFailure] = boolean: "false" [CannonFailure] = boolean: "false" [MLWSFailure] = boolean: "false" [ACSFailure] = boolean: "false" [RadarFailure] = boolean: "false" [HelmetFailure] = boolean: "false" [HUDFailure] = boolean: "false" [LeftMainPumpFailure] = boolean: "false" [RightWingPumpFailure] = boolean: "false" [LeftWingPumpFailure] = boolean: "false" [MFDFailure] = boolean: "false" [RWSFailure] = boolean: "false" [GearFailure] = boolean: "false" [HydraulicsFailure] = boolean: "false" [AutopilotFailure] = boolean: "true" [FuelTankDamage] = boolean: "false" [LeftAileronFailure] = boolean: "false" [CanopyOpen] = boolean: "false" [RightMainPumpFailure] = boolean: "false" [StallSignalization] = boolean: "false" [LeftEngineFailure] = boolean: "false" [AutopilotOn] = boolean: "false" [LeftTailPlaneFailure] = boolean: "false" ]] if ExportScript.Config.IkarusExport and lFunctionTyp == "Ikarus" then ExportScript.Tools.SendData(700, lMCPState.LeftTailPlaneFailure == true and 1 or 0 ) ExportScript.Tools.SendData(701, lMCPState.RightTailPlaneFailure == true and 1 or 0 ) ExportScript.Tools.SendData(702, lMCPState.MasterWarning == true and 1 or 0 ) ExportScript.Tools.SendData(703, lMCPState.LeftEngineFailure == true and 1 or 0 ) ExportScript.Tools.SendData(704, lMCPState.RightEngineFailure == true and 1 or 0 ) ExportScript.Tools.SendData(705, lMCPState.LeftAileronFailure == true and 1 or 0 ) ExportScript.Tools.SendData(706, lMCPState.RightAileronFailure == true and 1 or 0 ) ExportScript.Tools.SendData(707, lMCPState.LeftMainPumpFailure == true and 1 or 0 ) ExportScript.Tools.SendData(708, lMCPState.RightMainPumpFailure == true and 1 or 0 ) ExportScript.Tools.SendData(709, lMCPState.LeftWingPumpFailure == true and 1 or 0 ) ExportScript.Tools.SendData(710, lMCPState.RightWingPumpFailure == true and 1 or 0 ) ExportScript.Tools.SendData(711, lMCPState.EOSFailure == true and 1 or 0 ) ExportScript.Tools.SendData(712, lMCPState.ECMFailure == true and 1 or 0 ) ExportScript.Tools.SendData(713, lMCPState.CannonFailure == true and 1 or 0 ) ExportScript.Tools.SendData(714, lMCPState.MLWSFailure == true and 1 or 0 ) ExportScript.Tools.SendData(715, lMCPState.ACSFailure == true and 1 or 0 ) ExportScript.Tools.SendData(716, lMCPState.RadarFailure == true and 1 or 0 ) ExportScript.Tools.SendData(717, lMCPState.HelmetFailure == true and 1 or 0 ) ExportScript.Tools.SendData(718, lMCPState.HUDFailure == true and 1 or 0 ) ExportScript.Tools.SendData(719, lMCPState.MFDFailure == true and 1 or 0 ) ExportScript.Tools.SendData(720, lMCPState.RWSFailure == true and 1 or 0 ) ExportScript.Tools.SendData(721, lMCPState.GearFailure == true and 1 or 0 ) ExportScript.Tools.SendData(722, lMCPState.HydraulicsFailure == true and 1 or 0 ) ExportScript.Tools.SendData(723, lMCPState.AutopilotFailure == true and 1 or 0 ) ExportScript.Tools.SendData(724, lMCPState.FuelTankDamage == true and 1 or 0 ) --ExportScript.Tools.SendData(725, lMCPState.CanopyOpen == true and 1 or 0 ) ExportScript.Tools.SendData(726, lMCPState.StallSignalization == true and 1 or 0 ) ExportScript.Tools.SendData(727, lMCPState.AutopilotOn == true and 1 or 0 ) local lEngineInfo = LoGetEngineInfo() if lEngineInfo ~= nil then --ExportScript.Tools.WriteToLog('lEngineInfo: '..ExportScript.Tools.dump(lEngineInfo)) ExportScript.Tools.SendData(728, lEngineInfo.EngineStart.left ) -- lamp start left engine 1 (0|1) ExportScript.Tools.SendData(729, lEngineInfo.EngineStart.right ) -- lamp start right engine 1 (0|1) ExportScript.Tools.SendData(730, lEngineInfo.RPM.left < 45 and 1 or 0 ) -- lamp generator left engine 1 (0|1) ExportScript.Tools.SendData(731, lEngineInfo.RPM.right < 45 and 1 or 0 ) -- lamp generator right engine 1 (0|1) end end if ExportScript.Config.DACExport and lFunctionTyp == "DAC" then ExportScript.Tools.SendDataDAC("700", lMCPState.LeftTailPlaneFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("701", lMCPState.RightTailPlaneFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("702", lMCPState.MasterWarning == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("703", lMCPState.LeftEngineFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("704", lMCPState.RightEngineFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("705", lMCPState.LeftAileronFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("706", lMCPState.RightAileronFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("707", lMCPState.LeftMainPumpFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("708", lMCPState.RightMainPumpFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("709", lMCPState.LeftWingPumpFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("710", lMCPState.RightWingPumpFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("711", lMCPState.EOSFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("712", lMCPState.ECMFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("713", lMCPState.CannonFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("714", lMCPState.MLWSFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("715", lMCPState.ACSFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("716", lMCPState.RadarFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("717", lMCPState.HelmetFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("718", lMCPState.HUDFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("719", lMCPState.MFDFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("720", lMCPState.RWSFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("721", lMCPState.GearFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("722", lMCPState.HydraulicsFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("723", lMCPState.AutopilotFailure == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("724", lMCPState.FuelTankDamage == true and 1 or 0 ) --ExportScript.Tools.SendDataDAC("725", lMCPState.CanopyOpen == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("726", lMCPState.StallSignalization == true and 1 or 0 ) ExportScript.Tools.SendDataDAC("727", lMCPState.AutopilotOn == true and 1 or 0 ) local lEngineInfo = LoGetEngineInfo() if lEngineInfo ~= nil then --ExportScript.Tools.WriteToLog('lEngineInfo: '..ExportScript.Tools.dump(lEngineInfo)) ExportScript.Tools.SendDataDAC("728", lEngineInfo.EngineStart.left ) -- lamp start left engine 1 (0|1) ExportScript.Tools.SendDataDAC("729", lEngineInfo.EngineStart.right ) -- lamp start right engine 1 (0|1) ExportScript.Tools.SendDataDAC("730", lEngineInfo.RPM.left < 45 and 1 or 0 ) -- lamp generator left engine 1 (0|1) ExportScript.Tools.SendDataDAC("731", lEngineInfo.RPM.right < 45 and 1 or 0 ) -- lamp generator right engine 1 (0|1) end end end function ExportScript.AF.FlareChaff(FunctionTyp) local lFunctionTyp = FunctionTyp or "Ikarus" local lSnares = LoGetSnares() -- Flare and Chaff if lSnares == nil then return end --ExportScript.Tools.WriteToLog('lSnares: '..ExportScript.Tools.dump(lSnares)) --[chaff] = number: "30" --[flare] = number: "30" if ExportScript.AF.maxChaff == nil then ExportScript.AF.maxChaff = lSnares.chaff ExportScript.AF.tmpChaff = ExportScript.AF.maxChaff end if ExportScript.AF.maxFlare == nil then ExportScript.AF.maxFlare = lSnares.flare ExportScript.AF.tmpFlare = ExportScript.AF.maxFlare end if ExportScript.AF.timerChaff == nil then ExportScript.AF.timerChaff = 0 ExportScript.AF.timerChaffCounter = 3 end if ExportScript.AF.timerFlare == nil then ExportScript.AF.timerFlare = 0 ExportScript.AF.timerFlareCounter = 3 end local lblinkChaff = 0 local lblinkFlare = 0 local ltmp = 0 if ExportScript.AF.tmpChaff == 0 then lblinkChaff = 1 end if ExportScript.AF.tmpFlare == 0 then lblinkFlare = 1 end if lSnares.chaff < ExportScript.AF.tmpChaff then --ExportScript.Tools.WriteToLog('Chaff: '..ExportScript.Tools.dump(lSnares.chaff)..', ExportScript.AF.tmpChaff:'..ExportScript.Tools.dump(ExportScript.AF.tmpChaff)) ExportScript.AF.tmpChaff = lSnares.chaff --ExportScript.AF.timerChaff = os.time() ExportScript.AF.timerChaff = os.clock() ExportScript.Tools.WriteToLog('Chaff ausgeworfen, Zeit: '..ExportScript.Tools.dump(ExportScript.AF.timerChaff)) ExportScript.AF.timerChaffCounter = 3 end if lSnares.flare < ExportScript.AF.tmpFlare then --ExportScript.Tools.WriteToLog('Flare: '..ExportScript.Tools.dump(lSnares.flare)..', ExportScript.AF.tmpFlare:'..ExportScript.Tools.dump(ExportScript.AF.tmpFlare)) ExportScript.AF.tmpFlare = lSnares.flare --ExportScript.AF.timerFlare = os.time() ExportScript.AF.timerFlare = os.clock() ExportScript.Tools.WriteToLog('Flare ausgeworfen, Zeit: '..ExportScript.Tools.dump(ExportScript.AF.timerFlare)) ExportScript.AF.timerFlareCounter = 3 end if lblinkChaff == 0 and ExportScript.AF.timerChaff > 0.0 and ExportScript.AF.timerChaffCounter > 0 then --local ldiffTimer = os.difftime (os.time(), ExportScript.AF.timerChaff) local ldiffTimer = os.clock() - ExportScript.AF.timerChaff ltmp, ldiffTimer = math.modf(ldiffTimer) --ExportScript.Tools.WriteToLog('Zeit: '..ExportScript.AF.timerChaff..', Counter: '..ExportScript.AF.timerChaffCounter) --ExportScript.Tools.WriteToLog('Zeit Diff: '..ldiffTimer) if ExportScript.AF.timerChaffCounter == 1 and ldiffTimer > 0.9 then --ExportScript.Tools.WriteToLog('0') lblinkChaff = 0 ExportScript.AF.timerChaffCounter = 3 ExportScript.AF.timerChaff = 0.0 elseif ExportScript.AF.timerChaffCounter == 1 and ldiffTimer > 0.8 then --ExportScript.Tools.WriteToLog('1') lblinkChaff = 1 --ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ExportScript.AF.timerChaffCounter == 2 and ldiffTimer > 0.6 then --ExportScript.Tools.WriteToLog('2') lblinkChaff = 0 ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ExportScript.AF.timerChaffCounter == 2 and ldiffTimer > 0.4 then --ExportScript.Tools.WriteToLog('3') lblinkChaff = 1 --ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ExportScript.AF.timerChaffCounter == 3 and ldiffTimer > 0.2 then --ExportScript.Tools.WriteToLog('4') lblinkChaff = 0 ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ExportScript.AF.timerChaffCounter == 3 and ldiffTimer > 0.0 then --ExportScript.Tools.WriteToLog('5') lblinkChaff = 1 --ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ldiffTimer > 0.95 then --ExportScript.Tools.WriteToLog('else') lblinkChaff = 0 ExportScript.AF.timerChaffCounter = 3 ExportScript.AF.timerChaff = 0.0 end --[[ if ExportScript.AF.timerChaffCounter == 3 and ldiffTimer < 0.5 then ExportScript.Tools.WriteToLog('0') lblinkChaff = 1 --ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ExportScript.AF.timerChaffCounter == 3 and ldiffTimer < 1.0 then ExportScript.Tools.WriteToLog('1') lblinkChaff = 0 ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ExportScript.AF.timerChaffCounter == 2 and ldiffTimer < 1.5 then ExportScript.Tools.WriteToLog('2') lblinkChaff = 1 --ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ExportScript.AF.timerChaffCounter == 2 and ldiffTimer < 2.0 then ExportScript.Tools.WriteToLog('3') lblinkChaff = 0 ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ExportScript.AF.timerChaffCounter == 1 and ldiffTimer < 2.5 then ExportScript.Tools.WriteToLog('4') lblinkChaff = 1 --ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ExportScript.AF.timerChaffCounter == 1 and ldiffTimer < 3.0 then ExportScript.Tools.WriteToLog('5') lblinkChaff = 0 ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ExportScript.AF.timerChaffCounter == 0 or ldiffTimer > 3.0 then ExportScript.Tools.WriteToLog('else') lblinkChaff = 0 ExportScript.AF.timerChaffCounter = 3 ExportScript.AF.timerChaff = 0 end]] --[[ if ExportScript.AF.timerChaffCounter == 1 and ldiffTimer == 5 then ExportScript.Tools.WriteToLog('0') lblinkChaff = 0 ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ExportScript.AF.timerChaffCounter == 1 and ldiffTimer == 4 then ExportScript.Tools.WriteToLog('1') lblinkChaff = 1 --ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ExportScript.AF.timerChaffCounter == 2 and ldiffTimer == 3 then ExportScript.Tools.WriteToLog('2') lblinkChaff = 0 ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ExportScript.AF.timerChaffCounter == 2 and ldiffTimer == 2 then ExportScript.Tools.WriteToLog('3') lblinkChaff = 1 --ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ExportScript.AF.timerChaffCounter == 3 and ldiffTimer == 1 then ExportScript.Tools.WriteToLog('4') lblinkChaff = 0 ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ExportScript.AF.timerChaffCounter == 3 and ldiffTimer == 0 then ExportScript.Tools.WriteToLog('5') lblinkChaff = 1 --ExportScript.AF.timerChaffCounter = ExportScript.AF.timerChaffCounter - 1 elseif ExportScript.AF.timerChaffCounter == 0 or ldiffTimer > 5 then ExportScript.Tools.WriteToLog('else') lblinkChaff = 0 ExportScript.AF.timerChaffCounter = 3 ExportScript.AF.timerChaff = 0 end]] end if lblinkFlare == 0 and ExportScript.AF.timerFlare > 0.0 and ExportScript.AF.timerFlareCounter > 0 then --local ldiffTimer = os.difftime (os.time(), ExportScript.AF.timerFlare) local ldiffTimer = os.clock() - ExportScript.AF.timerFlare ltmp, ldiffTimer = math.modf(ldiffTimer) --ExportScript.Tools.WriteToLog('Zeit: '..ExportScript.AF.timerFlare..', Counter: '..ExportScript.AF.timerFlareCounter) --ExportScript.Tools.WriteToLog('Zeit Diff: '..ldiffTimer) if ExportScript.AF.timerFlareCounter == 1 and ldiffTimer > 0.9 then --ExportScript.Tools.WriteToLog('0') lblinkFlare = 0 ExportScript.AF.timerFlareCounter = 3 ExportScript.AF.timerFlare = 0.0 elseif ExportScript.AF.timerFlareCounter == 1 and ldiffTimer > 0.8 then --ExportScript.Tools.WriteToLog('1') lblinkFlare = 1 --ExportScript.AF.timerFlareCounter = ExportScript.AF.timerFlareCounter - 1 elseif ExportScript.AF.timerFlareCounter == 2 and ldiffTimer > 0.6 then --ExportScript.Tools.WriteToLog('2') lblinkFlare = 0 ExportScript.AF.timerFlareCounter = ExportScript.AF.timerFlareCounter - 1 elseif ExportScript.AF.timerFlareCounter == 2 and ldiffTimer > 0.4 then --ExportScript.Tools.WriteToLog('3') lblinkFlare = 1 --ExportScript.AF.timerFlareCounter = ExportScript.AF.timerFlareCounter - 1 elseif ExportScript.AF.timerFlareCounter == 3 and ldiffTimer > 0.2 then --ExportScript.Tools.WriteToLog('4') lblinkFlare = 0 ExportScript.AF.timerFlareCounter = ExportScript.AF.timerFlareCounter - 1 elseif ExportScript.AF.timerFlareCounter == 3 and ldiffTimer > 0.0 then --ExportScript.Tools.WriteToLog('5') lblinkFlare = 1 --ExportScript.AF.timerFlareCounter = ExportScript.AF.timerFlareCounter - 1 elseif ldiffTimer > 0.95 then --ExportScript.Tools.WriteToLog('else') lblinkFlare = 0 ExportScript.AF.timerFlareCounter = 3 ExportScript.AF.timerFlare = 0.0 end end --ExportScript.Tools.WriteToLog('lblinkChaff: '..lblinkChaff) if ExportScript.Config.IkarusExport and lFunctionTyp == "Ikarus" then ExportScript.Tools.SendData(800, lSnares.chaff ) -- display chaff ExportScript.Tools.SendData(801, lSnares.flare ) -- display flare ExportScript.Tools.SendData(802, lblinkChaff ) -- blink chaff active/aktive empty chaff ExportScript.Tools.SendData(803, lblinkFlare ) -- blink flare active/aktive empty flare ExportScript.Tools.SendData(804, ExportScript.AF.tmpChaff < 20 and 1 or 0 ) -- minimum chaff lamp ExportScript.Tools.SendData(805, ExportScript.AF.tmpFlare < 10 and 1 or 0 ) -- minimum flare lamp end if ExportScript.Config.DACExport and lFunctionTyp == "DAC" then ExportScript.Tools.SendDataDAC(800, lSnares.chaff ) -- display chaff ExportScript.Tools.SendDataDAC(801, lSnares.flare ) -- display flare ExportScript.Tools.SendDataDAC(802, lblinkChaff ) -- blink chaff active/aktive empty chaff ExportScript.Tools.SendDataDAC(803, lblinkFlare ) -- blink flare active/aktive empty flare ExportScript.Tools.SendDataDAC(804, ExportScript.AF.tmpChaff < 20 and 1 or 0 ) -- minimum chaff lamp ExportScript.Tools.SendDataDAC(805, ExportScript.AF.tmpFlare < 10 and 1 or 0 ) -- minimum flare lamp end end function ExportScript.AF.MechanicalDevicesIndicator(FunctionTyp) local lFunctionTyp = FunctionTyp or "Ikarus" -- The mechanical devices indicator shows the position of the landing gear, flaps, leading edge flaps and airbrake local lMechInfo = LoGetMechInfo() -- mechanical components, e.g. Flaps, Wheelbrakes,... if lMechInfo == nil then return end local lTrueAirSpeed = LoGetTrueAirSpeed() if lTrueAirSpeed == nil then lTrueAirSpeed = 0 end --ExportScript.Tools.WriteToLog('ExportScript.AF.MechanicalDevicesIndicator: '..ExportScript.Tools.dump(lMechInfo)) --[[ [hook] = { [status] = number: "0" [value] = number: "0" } [parachute] = { [status] = number: "0" [value] = number: "0" } [controlsurfaces] = { [eleron] = { [left] = number: "0" [right] = number: "-0.21084336936474" } [elevator] = { [left] = number: "-0" [right] = number: "-0" } [rudder] = { [left] = number: "0" [right] = number: "0" } } [airintake] = { [status] = number: "0" [value] = number: "0" } [canopy] = { [status] = number: "0" [value] = number: "0" } [refuelingboom] = { [status] = number: "0" [value] = number: "0" } [wing] = { [status] = number: "0" [value] = number: "0" } [noseflap] = { [status] = number: "0" [value] = number: "0" } [gear] = { [value] = number: "0" [nose] = { [rod] = number: "0" } [main] = { [left] = { [rod] = number: "0" } [right] = { [rod] = number: "0" } } [status] = number: "0" } [speedbrakes] = { [status] = number: "0" [value] = number: "0" } [wheelbrakes] = { [status] = number: "0" [value] = number: "0" } [flaps] = { [status] = number: "0" [value] = number: "0" }]] if ExportScript.Config.IkarusExport and lFunctionTyp == "Ikarus" then ExportScript.Tools.SendData(501, (lMechInfo.gear.value > 0.85 and 1 or 0) ) -- nose gear ExportScript.Tools.SendData(502, (lMechInfo.gear.value > 0.95 and 1 or 0) ) -- left gear ExportScript.Tools.SendData(503, (lMechInfo.gear.value == 1 and 1 or 0) ) -- right gear ExportScript.Tools.SendData(510, (lMechInfo.speedbrakes.value > 0.1 and 1 or 0) ) -- speedbreakes on > 0.1 (0 - 1) ExportScript.Tools.SendData(531, (lMechInfo.flaps.value > 0.25 and 1 or 0) ) -- flap 1. position ExportScript.Tools.SendData(532, (lMechInfo.flaps.value > 0.93 and 1 or 0) ) -- flap 2. position ExportScript.Tools.SendData(533, ((lMechInfo.flaps.value > 0.93 and lTrueAirSpeed > 340) and 1 or 0) ) -- Speed Warning for Flaps, same light as gear warning light, but blinking light ExportScript.Tools.SendData(534, (lMechInfo.gear.value > 0.5 and 1 or 0) ) -- Intake FOD shields ExportScript.Tools.SendData(725, (lMechInfo.canopy.value == 1 and 1 or 0) ) -- CanopyOpen end if ExportScript.Config.DACExport and lFunctionTyp == "DAC" then ExportScript.Tools.SendDataDAC(501, (lMechInfo.gear.value > 0.85 and 1 or 0) ) -- nose gear ExportScript.Tools.SendDataDAC(502, (lMechInfo.gear.value > 0.95 and 1 or 0) ) -- left gear ExportScript.Tools.SendDataDAC(503, (lMechInfo.gear.value == 1 and 1 or 0) ) -- right gear ExportScript.Tools.SendDataDAC(510, (lMechInfo.speedbrakes.value > 0.1 and 1 or 0) ) -- speedbreakes on > 0.1 (0 - 1) ExportScript.Tools.SendDataDAC(531, (lMechInfo.flaps.value > 0.25 and 1 or 0) ) -- flap 1. position ExportScript.Tools.SendDataDAC(532, (lMechInfo.flaps.value > 0.93 and 1 or 0) ) -- flap 2. position ExportScript.Tools.SendDataDAC(533, ((lMechInfo.flaps.value > 0.93 and lTrueAirSpeed > 340) and 1 or 0) ) -- Speed Warning for Flaps, same light as gear warning light, but blinking light ExportScript.Tools.SendDataDAC(534, (lMechInfo.gear.value > 0.5 and 1 or 0) ) -- Intake FOD shields ExportScript.Tools.SendDataDAC(725, (lMechInfo.canopy.value == 1 and 1 or 0) ) -- CanopyOpen end end function ExportScript.AF.WeaponStatusPanel(FunctionTyp) -- The weapon status panel, quantity and readiness of the currently selected weapon and the remaining gun ammunition are indicated. local lFunctionTyp = FunctionTyp or "Ikarus" ExportScript.AF.PayloadInfo = LoGetPayloadInfo() if ExportScript.AF.PayloadInfo == nil then return end --ExportScript.Tools.WriteToLog('ExportScript.AF.PayloadInfo: '..ExportScript.Tools.dump(ExportScript.AF.PayloadInfo)) --[[ exsample [Stations] = { [1] = { [CLSID] = string: "{6D21ECEA-F85B-4E8D-9D51-31DC9B8AA4EF}" [container] = boolean: "false" [count] = number: "1" [weapon] = { [level3] = number: "45" [level1] = number: "4" [level4] = number: "25" [level2] = number: "15" } } [2] = { [wstype] = { [level3] = number: "32" [level1] = number: "4" [level4] = number: "117" [level2] = number: "7" } [count] = number: "7" [CLSID] = string: "{69926055-0DA8-4530-9F2F-C86B157EA9F6}" [adapter] = { [level3] = number: "0" [level1] = number: "0" [level4] = number: "0" [level2] = number: "0" } [container] = boolean: "true" [weapon] = { [level3] = number: "33" [level1] = number: "4" [level4] = number: "147" [level2] = number: "7" } } [3] = { [wstype] = { [level3] = number: "32" [level1] = number: "4" [level4] = number: "135" [level2] = number: "4" } [count] = number: "2" [CLSID] = string: "LAU_88_AGM_65H_2_L" [adapter] = { [level3] = number: "47" [level1] = number: "4" [level4] = number: "4" [level2] = number: "15" } [container] = boolean: "true" [weapon] = { [level3] = number: "8" [level1] = number: "4" [level4] = number: "138" [level2] = number: "4" } } [4] = { [wstype] = { [level3] = number: "32" [level1] = number: "4" [level4] = number: "114" [level2] = number: "5" } [count] = number: "3" [CLSID] = string: "BRU-42_3*BDU-33" [adapter] = { [level3] = number: "0" [level1] = number: "0" [level4] = number: "0" [level2] = number: "0" } [container] = boolean: "true" [weapon] = { [level3] = number: "9" [level1] = number: "4" [level4] = number: "69" [level2] = number: "5" } } [5] = { [CLSID] = string: "{5335D97A-35A5-4643-9D9B-026C75961E52}" [container] = boolean: "false" [count] = number: "1" [weapon] = { [level3] = number: "38" [level1] = number: "4" [level4] = number: "35" [level2] = number: "5" } } [6] = { [CLSID] = string: "Fuel_Tank_FT600" [container] = boolean: "false" [count] = number: "1" [weapon] = { [level3] = number: "43" [level1] = number: "1" [level4] = number: "103" [level2] = number: "3" } } [7] = { [CLSID] = string: "{5335D97A-35A5-4643-9D9B-026C75961E52}" [container] = boolean: "false" [count] = number: "1" [weapon] = { [level3] = number: "38" [level1] = number: "4" [level4] = number: "35" [level2] = number: "5" } } [8] = { [wstype] = { [level3] = number: "32" [level1] = number: "4" [level4] = number: "114" [level2] = number: "5" } [count] = number: "3" [CLSID] = string: "BRU-42_3*BDU-33" [adapter] = { [level3] = number: "0" [level1] = number: "0" [level4] = number: "0" [level2] = number: "0" } [container] = boolean: "true" [weapon] = { [level3] = number: "9" [level1] = number: "4" [level4] = number: "69" [level2] = number: "5" } } [9] = { [wstype] = { [level3] = number: "32" [level1] = number: "4" [level4] = number: "106" [level2] = number: "4" } [count] = number: "2" [CLSID] = string: "{E6A6262A-CA08-4B3D-B030-E1A993B98453}" [adapter] = { [level3] = number: "47" [level1] = number: "4" [level4] = number: "4" [level2] = number: "15" } [container] = boolean: "true" [weapon] = { [level3] = number: "8" [level1] = number: "4" [level4] = number: "77" [level2] = number: "4" } } [10] = { [wstype] = { [level3] = number: "32" [level1] = number: "4" [level4] = number: "117" [level2] = number: "7" } [count] = number: "7" [CLSID] = string: "{69926055-0DA8-4530-9F2F-C86B157EA9F6}" [adapter] = { [level3] = number: "0" [level1] = number: "0" [level4] = number: "0" [level2] = number: "0" } [container] = boolean: "true" [weapon] = { [level3] = number: "33" [level1] = number: "4" [level4] = number: "147" [level2] = number: "7" } } [11] = { [wstype] = { [level3] = number: "32" [level1] = number: "4" [level4] = number: "50" [level2] = number: "4" } [count] = number: "2" [CLSID] = string: "{DB434044-F5D0-4F1F-9BA9-B73027E18DD3}" [adapter] = { [level3] = number: "0" [level1] = number: "0" [level4] = number: "0" [level2] = number: "0" } [container] = boolean: "true" [weapon] = { [level3] = number: "7" [level1] = number: "4" [level4] = number: "22" [level2] = number: "4" } } } [CurrentStation] = number: "0" [Cannon] = { [shells] = number: "1150" } ]] --[[ Weapon Panel | --------------------------------------------------- | | | | | | | | | | | 1 2 3 4 5 6 7 8 9 10 11 ]] -- Payload Info -- weapon stations (panel) 1 (left) - 11 (right) reserved --ExportScript.Tools.SendDataDAC("CurrentStation", ExportScript.AF.PayloadInfo.CurrentStation ) -- air-to-air missils panel 1 and 11, air combat modus, CurrentStation = 1, panel 1 and 11 on -- wenn die Waffenstationen gleichmässig belegt sind, hat bei Auswahl CurrentStation immer den Wert der linken Station -- bei ungleichmäßiger Belegung, hat CurrentStation immer den Wert der jeweiligen Station -- Waffenbezeichnung als UUID, ExportScript.AF.PayloadInfo.Stations[X].CLSID ExportScript.Tools.SendDataDAC("100", ExportScript.AF.PayloadInfo.Cannon.shells ) -- count cannon shells ExportScript.Tools.SendDataDAC("101", (ExportScript.AF.PayloadInfo.Stations[1].count > 0 and 1 or 0) ) -- weapon presend > 0 (panel 1) ExportScript.Tools.SendDataDAC("102", (ExportScript.AF.PayloadInfo.Stations[2].count > 0 and 1 or 0) ) -- weapon presend > 0 (panel 2) ExportScript.Tools.SendDataDAC("103", (ExportScript.AF.PayloadInfo.Stations[3].count > 0 and 1 or 0) ) -- weapon presend > 0 (panel 3) ExportScript.Tools.SendDataDAC("104", (ExportScript.AF.PayloadInfo.Stations[4].count > 0 and 1 or 0) ) -- weapon presend > 0 (panel 4) ExportScript.Tools.SendDataDAC("105", (ExportScript.AF.PayloadInfo.Stations[5].count > 0 and 1 or 0) ) -- weapon presend > 0 (panel 5) ExportScript.Tools.SendDataDAC("106", (ExportScript.AF.PayloadInfo.Stations[6].count > 0 and 1 or 0) ) -- weapon presend > 0 (panel 6, center station) ExportScript.Tools.SendDataDAC("107", (ExportScript.AF.PayloadInfo.Stations[7].count > 0 and 1 or 0) ) -- weapon presend > 0 (panel 7) ExportScript.Tools.SendDataDAC("108", (ExportScript.AF.PayloadInfo.Stations[8].count > 0 and 1 or 0) ) -- weapon presend > 0 (panel 8) ExportScript.Tools.SendDataDAC("109", (ExportScript.AF.PayloadInfo.Stations[9].count > 0 and 1 or 0) ) -- weapon presend > 0 (panel 9) ExportScript.Tools.SendDataDAC("110", (ExportScript.AF.PayloadInfo.Stations[10].count > 0 and 1 or 0) ) -- weapon presend > 0 (panel 10) ExportScript.Tools.SendDataDAC("111", (ExportScript.AF.PayloadInfo.Stations[11].count > 0 and 1 or 0) ) -- weapon presend > 0 (panel 11) -- weapon stations (panel) 1 (left) - 11 (right) empty ExportScript.Tools.SendDataDAC("121", (ExportScript.AF.PayloadInfo.Stations[1].count == 0 and 1 or 0) ) -- weapon presend > 0 (panel 1) ExportScript.Tools.SendDataDAC("122", (ExportScript.AF.PayloadInfo.Stations[2].count == 0 and 1 or 0) ) -- weapon presend > 0 (panel 2) ExportScript.Tools.SendDataDAC("123", (ExportScript.AF.PayloadInfo.Stations[3].count == 0 and 1 or 0) ) -- weapon presend > 0 (panel 3) ExportScript.Tools.SendDataDAC("124", (ExportScript.AF.PayloadInfo.Stations[4].count == 0 and 1 or 0) ) -- weapon presend > 0 (panel 4) ExportScript.Tools.SendDataDAC("125", (ExportScript.AF.PayloadInfo.Stations[5].count == 0 and 1 or 0) ) -- weapon presend > 0 (panel 5) ExportScript.Tools.SendDataDAC("126", (ExportScript.AF.PayloadInfo.Stations[6].count == 0 and 1 or 0) ) -- weapon presend > 0 (panel 6, center station) ExportScript.Tools.SendDataDAC("127", (ExportScript.AF.PayloadInfo.Stations[7].count == 0 and 1 or 0) ) -- weapon presend > 0 (panel 7) ExportScript.Tools.SendDataDAC("128", (ExportScript.AF.PayloadInfo.Stations[8].count == 0 and 1 or 0) ) -- weapon presend > 0 (panel 8) ExportScript.Tools.SendDataDAC("129", (ExportScript.AF.PayloadInfo.Stations[9].count == 0 and 1 or 0) ) -- weapon presend > 0 (panel 9) ExportScript.Tools.SendDataDAC("130", (ExportScript.AF.PayloadInfo.Stations[10].count == 0 and 1 or 0) ) -- weapon presend > 0 (panel 10) ExportScript.Tools.SendDataDAC("131", (ExportScript.AF.PayloadInfo.Stations[11].count == 0 and 1 or 0) ) -- weapon presend > 0 (panel 11) -- defination if ExportScript.AF.CurrentStationTmp == nil then ExportScript.AF.CurrentStationTmp = -1 end if ExportScript.AF.PayloadInfo.CurrentStation > 0 and ExportScript.AF.CurrentStationTmp ~= ExportScript.AF.PayloadInfo.CurrentStation then ExportScript.AF.CurrentStationTmp = ExportScript.AF.PayloadInfo.CurrentStation ExportScript.AF.TmpStationToPanel = {} ExportScript.AF.TmpStationToPanel[1] = {Panel = 1, StationID = 101, CurrentID = 201, CurrentID2 = 221 } -- left ExportScript.AF.TmpStationToPanel[2] = {Panel = 2, StationID = 102, CurrentID = 202, CurrentID2 = 222 } ExportScript.AF.TmpStationToPanel[3] = {Panel = 3, StationID = 103, CurrentID = 203, CurrentID2 = 223 } ExportScript.AF.TmpStationToPanel[4] = {Panel = 4, StationID = 104, CurrentID = 204, CurrentID2 = 224 } ExportScript.AF.TmpStationToPanel[5] = {Panel = 5, StationID = 105, CurrentID = 205, CurrentID2 = 225 } ExportScript.AF.TmpStationToPanel[6] = {Panel = 6, StationID = 106, CurrentID = 206, CurrentID2 = 226 } ExportScript.AF.TmpStationToPanel[7] = {Panel = 7, StationID = 107, CurrentID = 207, CurrentID2 = 227 } ExportScript.AF.TmpStationToPanel[8] = {Panel = 8, StationID = 108, CurrentID = 208, CurrentID2 = 228 } ExportScript.AF.TmpStationToPanel[9] = {Panel = 9, StationID = 109, CurrentID = 209, CurrentID2 = 229 } ExportScript.AF.TmpStationToPanel[10] = {Panel = 10, StationID = 110, CurrentID = 210, CurrentID2 = 230 } ExportScript.AF.TmpStationToPanel[11] = {Panel = 11, StationID = 111, CurrentID = 211, CurrentID2 = 231 } -- right ExportScript.AF.WeaponStatusPanel_Reset(201, 211) ExportScript.AF.WeaponStatusPanel_Reset(221, 231) ExportScript.Tools.SendDataDAC(ExportScript.AF.TmpStationToPanel[ExportScript.AF.PayloadInfo.CurrentStation].CurrentID, 1) -- eigentliche Auswahl --ExportScript.Tools.WriteToLog('aktiv: '..ExportScript.AF.TmpStationToPanel[ExportScript.AF.PayloadInfo.CurrentStation].CurrentID) if ExportScript.AF.PayloadInfo.Stations[ExportScript.AF.PayloadInfo.CurrentStation].container then if ExportScript.AF.PayloadInfo.Stations[ExportScript.AF.PayloadInfo.CurrentStation].count > 1 then ExportScript.Tools.SendDataDAC(ExportScript.AF.TmpStationToPanel[ExportScript.AF.PayloadInfo.CurrentStation].CurrentID2, 1) -- eigentliche Auswahl --ExportScript.Tools.WriteToLog('aktiv2: '..ExportScript.AF.TmpStationToPanel[ExportScript.AF.PayloadInfo.CurrentStation].CurrentID2) end end table.foreach(ExportScript.AF.PayloadInfo.Stations, ExportScript.AF.WeaponStatusPanel_selectCurrentPayloadStation_F15C) -- zugehörige Stationen elseif ExportScript.AF.PayloadInfo.CurrentStation == 0 and ExportScript.AF.CurrentStationTmp > 0 then ExportScript.AF.WeaponStatusPanel_Reset(201, 211) ExportScript.AF.WeaponStatusPanel_Reset(221, 231) ExportScript.AF.CurrentStationTmp = -1 end end function ExportScript.AF.RWRlite(FunctionTyp) local lFunctionTyp = FunctionTyp or "Ikarus" local lTWSInfo = LoGetTWSInfo() -- RWR Information if lTWSInfo == nil then return end local lPriorityTmp = 0 local lPrimaryThreatTmp = 0 local lPrimaryAir = 0 local lPrimarySAM = 0 if(#lTWSInfo.Emitters > 0) then for EmitterIndex = 1, #lTWSInfo.Emitters, 1 do if(lTWSInfo.Emitters[EmitterIndex].Priority > lPriorityTmp) then lPriorityTmp = lTWSInfo.Emitters[EmitterIndex].Priority lPrimaryThreatTmp = EmitterIndex end end for EmitterIndex = 1, #lTWSInfo.Emitters, 1 do local lType = lTWSInfo.Emitters[EmitterIndex].Type --ExportScript.Tools.WriteToLog('level: '..lType.level1..', '..lType.level2..', '..lType.level3..', '..lType.level4) local lAzimut = ExportScript.Tools.round(lTWSInfo.Emitters[EmitterIndex].Azimuth * 90, 1) if EmitterIndex == lPrimaryThreatTmp then ExportScript.AF.RWRlite_FoundErmitter = true lPrimaryAir = (lType.level1 == 1 and 1 or 0) lPrimarySAM = ((lType.level1 == 2 and lType.level2 == 16) and 1 or 0) end end else if ExportScript.AF.RWRlite_FoundErmitter ~= nil and ExportScript.AF.RWRlite_FoundErmitter then lPrimaryAir = 0 lPrimarySAM = 0 end end if ExportScript.Config.IkarusExport and lFunctionTyp == "Ikarus" then ExportScript.Tools.SendData(400, lPrimaryAir) -- primary Air ExportScript.Tools.SendData(401, lPrimarySAM) -- primary SAM end if ExportScript.Config.DACExport and lFunctionTyp == "DAC" then ExportScript.Tools.SendDataDAC(400, lPrimaryAir) -- primary Air ExportScript.Tools.SendDataDAC(401, lPrimarySAM) -- primary SAM end end -- Helper functions function ExportScript.AF.WeaponStatusPanel_selectCurrentPayloadStation_F15C(_index) if ExportScript.AF.PayloadInfo.Stations[ExportScript.AF.PayloadInfo.CurrentStation].CLSID == ExportScript.AF.PayloadInfo.Stations[_index].CLSID and ExportScript.AF.PayloadInfo.CurrentStation ~= _index then ExportScript.Tools.SendDataDAC(ExportScript.AF.TmpStationToPanel[_index].CurrentID, 1) --ExportScript.Tools.WriteToLog('aktiv3: '..ExportScript.AF.TmpStationToPanel[_index].CurrentID) if ExportScript.AF.PayloadInfo.Stations[ExportScript.AF.PayloadInfo.CurrentStation].container then if ExportScript.AF.PayloadInfo.Stations[ExportScript.AF.PayloadInfo.CurrentStation].count > 1 then ExportScript.Tools.SendDataDAC(ExportScript.AF.TmpStationToPanel[_index].CurrentID2, 1) --ExportScript.Tools.WriteToLog('aktiv3: '..ExportScript.AF.TmpStationToPanel[_index].CurrentID2) end end end end