-- Mi-8MTV2 Export ExportScript.FoundDCSModule = true ExportScript.Version.Mi8MT = "1.2.1" ExportScript.ConfigEveryFrameArguments = { --[[ every frames arguments based of "mainpanel_init.lua" Example (http://www.lua.org/manual/5.1/manual.html#pdf-string.format) [DeviceID] = "Format" [4] = "%.4f", <- floating-point number with 4 digits after point [19] = "%0.1f", <- floating-point number with 1 digit after point [129] = "%1d", <- decimal number [5] = "%.f", <- floating point number rounded to a decimal number ]] -- CONTROLLERS --------------------------------------------------------------- ----[209] = "%.4f", -- rudder { -1, 1} --[266] = "%.4f", -- rudder_add { 1, -1} --[181] = "%.4f", -- stick_roll {1, -1} --[180] = "%.4f", -- stick_pitch {1, -1} --[191] = "%.4f", -- collective_position {0, 1} --[192] = "%1d", -- correction_position {1, 0} --[230] = "%1d", -- collective_position_operator {0, 1} --[231] = "%1d", -- correction_position_operator {1, 0} --[560] = "%1d", -- coll_ROUTE_DESCENT_sw {0, 1} --[558] = "%1d", -- coll_ReadjustFreeTurbRPM_sw {0, 1} ----[208] = "%1d", -- collective_stopper {0, 1} --[187] = "%.4f", -- left_engine_throttle {0.0, 1.0} --[189] = "%.4f", -- right_engine_throttle {0.0, 1.0} --[881] = "%.4f", -- wheelBrakes {0.0, 1.0} ----[579] = "", -- throttle_cover {0.0, 1.0} ----[208] = "", -- rotor_brake_handle {0.0, 1.0} -- Variometer --------------------------------------------------------------- [16] = "%.4f", -- Variometer_L {-30, -20, -10, -5, -2, -1, 0, 1, 2, 5, 10, 20, 30} {-1.0, -0.71, -0.43, -0.23, -0.09, -0.05, 0, 0.05, 0.09, 0.23, 0.43, 0.71, 1.0} [95] = "%.4f", -- Variometer_R {-30, -20, -10, -5, -2, -1, 0, 1, 2, 5, 10, 20, 30} {-1.0, -0.71, -0.43, -0.23, -0.09, -0.05, 0, 0.05, 0.09, 0.23, 0.43, 0.71, 1.0} -- Airspeed --------------------------------------------------------------- [24] = "%.4f", -- IAS_L {-10.0, 0.0, 13.889, 27.78, 41.67, 55.56, 69.44, 83.33, 111.1, 125.0, 129.2} {0.0, 0.001, 0.028, 0.165, 0.277, 0.393, 1.0} [790] = "%.4f", -- IAS_R {-10.0, 0.0, 13.889, 27.78, 41.67, 55.56, 69.44, 83.33, 111.1, 125.0, 129.2} {0.0, 0.001, 0.028, 0.165, 0.277, 0.393, 1.0} -- AGB-3k --------------------------------------------------------------- [13] = "%.4f", -- AGB_3K_Left_roll {-1.0, 1.0} --[12] = "%.4f", -- AGB_3K_Left_pitch {1.0, -1.0} [14] = "%.4f", -- AGB_3K_Left_failure_flag {0.0, 1.0} [15] = "%.4f", -- AGB_3K_Left_sideslip {1.0, -1.0} [820] = "%.4f", -- AGB_3K_Left_index {0.5, -0.5} ------ [92] = "%.4f", -- AGB_3K_Right_roll {-1.0, 1.0} --[91] = "%.4f", -- AGB_3K_Right_pitch {1.0, -1.0} [93] = "%.4f", -- AGB_3K_Right_failure_flag {0.0, 1.0} [94] = "%.4f", -- AGB_3K_Right_sideslip {1.0, -1.0} [821] = "%.4f", -- AGB_3K_Right_index {0.5, -0.5} -- EUP-53 --------------------------------------------------------------- [22] = "%.4f", -- EUP_speed {-1.0, 1.0} [23] = "%.4f", -- EUP_sideslip {-1.0, 1.0} -- UGR-4K --------------------------------------------------------------- [25] = "%.4f", -- UGR_4K_heading_L {0.0, 1.0} [27] = "%.4f", -- UGR_4K_commanded_course_L {0.0, 1.0} [28] = "%.4f", -- UGR_4K_bearing_needle_L {0.0, 1.0} ---- [101] = "%.4f", -- UGR_4K_heading_R {0.0, 1.0} [103] = "%.4f", -- UGR_4K_commanded_course_R {0.0, 1.0} [104] = "%.4f", -- UGR_4K_bearing_needle_R {0.0, 1.0} -- Barometric altimeter VD-10K --------------------------------------------------------------- [19] = "%.4f", -- VD_10K_L_100 {0.0, 1.0} [20] = "%.4f", -- VD_10K_L_10 {0.0, 1.0} [833] = "%.4f", -- VD_10K_L_100_Ind {0.0, 1.0} [832] = "%.4f", -- VD_10K_L_10_Ind {0.0, 1.0} [916] = "%.4f", -- VD_10K_L_Shutter {0.822, 0.75} --[21] = "%.4f", -- VD_10K_L_PRESS {0.0, 1.0} ----- [98] = "%.4f", -- VD_10K_R_100 {0.0, 1.0} [99] = "%.4f", -- VD_10K_R_10 {0.0, 1.0} [835] = "%.4f", -- VD_10K_R_100_Ind {0.0, 1.0} [917] = "%.4f", -- VD_10K_R_Shutter {0.822, 0.75} [834] = "%.4f", -- VD_10K_R_10_Ind {0.0, 1.0} [100] = "%.4f", -- VD_10K_R_PRESS {0.0, 1.0} -- Rotor RPM --------------------------------------------------------------- [42] = "%.4f", -- RotorRPM {0.0, 1.0} [787] = "%.4f", -- RotorRPM_Oper {0.0, 1.0} -- Rotor Pitch --------------------------------------------------------------- [36] = "%.2f", -- RotorPitch {1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0, 12.0, 13.0, 14.0, 15.0} {0.0, 0.07, 0.14, 0.21, 0.29, 0.35, 0.43, 0.5, 0.57, 0.64, 0.71, 0.79, 0.86, 0.93, 1.0} -- Radar altimeter A-036 --------------------------------------------------------------- [34] = "%.3f", -- A_036_RALT {0, 100, 300, 800} {0.0, 0.475, 0.625, 1.0} [31] = "%.3f", -- A_036_DangerRALT_index {0, 100, 300, 800} {0.0, 0.475, 0.625, 1.0} [30] = "%.f", -- A_036_DangerRALT_lamp {0.0, 1.0} [33] = "%.1f", -- A_036_warning_flag {0.0, 1.0} -- Engines RPM --------------------------------------------------------------- [40] = "%.4f", -- LeftEngineRPM {0.0, 110.0} {0.0, 1.0} [41] = "%.4f", -- RightEngineRPM {0.0, 110.0} {0.0, 1.0} [788] = "%.4f", -- LeftEngineRPM_Oper {0.0, 110.0} {0.0, 1.0} [789] = "%.4f", -- RightEngineRPM_Oper {0.0, 110.0} {0.0, 1.0} -- Engines temperature --------------------------------------------------------------- [43] = "%.4f", -- LeftEngineTemperatureHund {0.0, 1200.0} {0.0, 1.0} [44] = "%.4f", -- LeftEngineTemperatureTenth {0.0, 100.0} {0.0, 1.0} [45] = "%.4f", -- RightEngineTemperatureHund {0.0, 1200.0} {0.0, 1.0} [46] = "%.4f", -- RightEngineTemperatureTenth {0.0, 100.0} {0.0, 1.0} -- Engines mode indicator --------------------------------------------------------------- [39] = "%.4f", -- EnginesMode {0.0, 1.0} [37] = "%.4f", -- LeftEngineMode {0.0, 1.0} [38] = "%.4f", -- RightEngineMode {0.0, 1.0} -- Engines brakes --------------------------------------------------------------- [204] = "%.1f", -- left_engine_brake_handle {0.0, 1.0} [206] = "%.1f", -- right_engine_brake_handle {0.0, 1.0} [203] = "%.1f", -- left_engine_brake_handle_holder {0.0, 1.0} [205] = "%.1f", -- right_engine_brake_handle_holder {0.0, 1.0} -- DISS 15 --------------------------------------------------------------- [830] = "%.4f", -- diss15_hover_x {-1.0, 0, 1.0} [828] = "%.4f", -- diss15_hover_y {-1.0, 1.0} [829] = "%.4f", -- diss15_hover_z {-1.0, 1.0} [831] = "%.4f", -- diss15_hover_lamp_off {0.0, 0.9} ---- [791] = "%.4f", -- diss15_drift_angle {-1.0, 1.0} ---- [795] = "%.4f", -- diss15_W_shutter {0.0, 1.0} [796] = "%.1f", -- diss15_W_memory_lamp {1.0, 0.0} [792] = "%.4f", -- diss15_W_hundreds {0.0, 1.0} [793] = "%.4f", -- diss15_W_tens {0.0, 1.0} [794] = "%.4f", -- diss15_W_ones {0.0, 1.0} ---- [817] = "%.4f", -- diss15_coord_on_lamp {1.0, 0.0} [805] = "%.4f", -- diss15_coord_forward {1.0, 0.0} [806] = "%.4f", -- diss15_coord_X_hundreds {0.0, 1.0} [807] = "%.4f", -- diss15_coord_X_tens {0.0, 1.0} [808] = "%.4f", -- diss15_coord_X_ones {0.0, 1.0} [802] = "%.4f", -- diss15_coord_right {0.0, 1.0} [799] = "%.4f", -- diss15_coord_Z_hundreds {0.0, 1.0} [800] = "%.4f", -- diss15_coord_Z_tens {0.0, 1.0} [801] = "%.4f", -- diss15_coord_Z_ones {0.0, 1.0} [811] = "%.4f", -- diss15_coord_angle_hundreds {0.0, 1.0} [812] = "%.4f", -- diss15_coord_angle_tens {0.0, 1.0} [813] = "%.4f", -- diss15_coord_angle_ones {0.0, 1.0} [814] = "%.4f", -- diss15_coord_angle_minutes {0.0, 1.0} ---- [822] = "%.f", -- diss15_check_control_lamp {0.0, 0.9} [823] = "%.f", -- diss15_check_work_lamp {0.0, 0.9} [824] = "%.f", -- diss15_check_failM_lamp {0.0, 0.9} [825] = "%.f", -- diss15_check_failC_lamp {0.0, 0.9} -- Oil --------------------------------------------------------------- [111] = "%.4f", -- oils_p_main_reductor {0.0, 1.0} [114] = "%.2f", -- oils_t_main_reductor {0.0, 1.0} {-0.25, 0.75} [113] = "%.2f", -- oils_temp_tail_reductor {0.0, 1.0} {-0.25, 0.75} [112] = "%.2f", -- oils_temp_intermediate_reductor {0.0, 1.0} {-0.25, 0.75} [115] = "%.4f", -- oils_p_left_engine {0.0, 1.0} [116] = "%.2f", -- oils_t_left_engine {-0.25, 0.75} [117] = "%.4f", -- oils_p_right_engine {0.0, 1.0} [118] = "%.2f", -- oils_t_right_engine {-0.25, 0.75} -- Autopilot --------------------------------------------------------------- [122] = "%.4f", -- autopilot_yaw_indicator {-1.0, 1.0} [124] = "%.4f", -- autopilot_pitch_indicator {-1.0, 1.0} [123] = "%.2f", -- autopilot_roll_indicator {-0.33, 0.33} [125] = "%.4f", -- autopilot_altitude_indicator {-1.0, 1.0} [119] = "%.4f", -- autopilot_yaw_scale {0.0, 1.0} [120] = "%.4f", -- autopilot_roll_scale {0.0, 1.0} [121] = "%.4f", -- autopilot_pitch_scale {0.0, 1.0} -- Center upper panel --------------------------------------------------------------- [404] = "%.2f", -- hydro_pressure_main {0.05, 0.33, 0.52, 0.69, 1.0} [405] = "%.2f", -- hydro_pressure_aux {0.05, 0.33, 0.52, 0.69, 1.0} [402] = "%.2f", -- APU_temperature {0.0, 0.2, 0.42, 0.69, 0.94, 1.0} [403] = "%.2f", -- APU_pressure {0.04, 0.95} -- Mechanic clock --------------------------------------------------------------- [49] = "%.4f", -- CLOCK_currtime_hours {0.0, 1.0} [50] = "%.4f", -- CLOCK_currtime_minutes {0.0, 1.0} [51] = "%.4f", -- CLOCK_currtime_seconds {0.0, 1.0} [56] = "%.4f", -- CLOCK_flight_time_meter_status {0.0, 1.0} [52] = "%.4f", -- CLOCK_flight_hours {0.0, 1.0} [53] = "%.4f", -- CLOCK_flight_minutes {0.0, 1.0} [54] = "%.4f", -- CLOCK_seconds_meter_time_minutes {0.0, 1.0} [55] = "%.4f", -- CLOCK_seconds_meter_time_seconds {0.0, 1.0} -- Fuel tanks --------------------------------------------------------------- [62] = "%.3f", -- FuelScaleUpper {0.0, 200.0, 400.0, 800.0, 1600.0, 2000.0, 2400.0, 2800.0} {0.0, 0.131, 0.244, 0.414, 0.647, 0.705, 0.9, 1.0} [62] = "%.3f", -- FuelScaleLower {0.0, 200.0, 300.0, 400.0, 600.0, 1200.0, 2240.0} {0.0, 0.165, 0.283, 0.393, 0.618, 1.0} -- Air system gauges --------------------------------------------------------------- [320] = "%.2f", -- air_system_pressure {0.0, 25.0, 50.0, 100.0} {0.0, 0.23, 0.48, 1.0} [321] = "%.4f", -- air_system_brake_pressure {0.0, 1.0} -- SPUU-52 --------------------------------------------------------------- [126] = "%.4f", -- SPUU_pointer {-1.0, 1.0} [786] = "%.f", -- SPUU52_lamp {0.0, 1.0} -- PU-26 LAMP --------------------------------------------------------------- [827] = "%.f", -- PU_26_GA_Lamp {0.0, 1.0} {0.0, 0.5} -- ARC-UD --------------------------------------------------------------- [458] = "%.f", -- ARC_UD_Narrow_Lamp {0.0, 0.9} [459] = "%.f", -- ARC_UD_Wide_Lamp {0.0, 0.9} [460] = "%.f", -- ARC_UD_Pulse_Lamp {0.0, 0.9} -- ARC-9 --------------------------------------------------------------- [681] = "%.4f", -- ARC_9_Signal {0.0, 1.0} ---- [857] = "%.4f", -- PKV_Reflector {0.0, 1.0} ---- [778] = "%.4f", -- SAFE_WEAP {0.0, 1.0} ---- [577] = "%.4f", -- AMMO_CNT1_1 {0.0, 1.0} [578] = "%.4f", -- AMMO_CNT1_2 {0.0, 1.0} [580] = "%.4f", -- AMMO_CNT2_1 {0.0, 1.0} [581] = "%.4f", -- AMMO_CNT2_2 {0.0, 1.0} [583] = "%.4f", -- AMMO_CNT3_1 {0.0, 1.0} [584] = "%.4f", -- AMMO_CNT3_2 {0.0, 1.0} -- Radio R-828 --------------------------------------------------------------- [740] = "%.2f", -- R828_ASU {0.0, 1.0} {0.0, 0.95} [736] = "%.3f", -- R828_channel {0, 1, 2, 3, 4, 5, 6, 7, 8, 9} {0.0, 0.101, 0.199, 0.302, 0.400, 0.502, 0.601, 0.697, 0.801, 0.898} -- Damage --------------------------------------------------------------- --[215] = "%0.1f", -- Blister_LEFT {0.0, 1.0} {0.0, 0.8} --[216] = "%0.1f", -- Blister_RIGHT {0.0, 1.0} {0.0, 0.8} ---- --[878] = "%.1f", -- WindShiels_Up {0.0, 1.0} --[879] = "%.1f", -- WindShiels_Down {0.0, 1.0} -- UV-26 --------------------------------------------------------------- --[892] = "%.1f", -- UV26_Left {0.0, 1.0} --[891] = "%.1f", -- UV26_Right {0.0, 1.0} -- Pilots --------------------------------------------------------------- --[245] = "%.1f", -- Pilot_Body {0.0, 1.0} --[242] = "%.1f", -- Operator_Body {0.0, 1.0} --[262] = "%.1f", -- Crew_Body {0.0, 1.0} -- Damage --------------------------------------------------------------- --[876] = "%.1f", -- Upper_Windshield {0.0, 1.0} --[877] = "%.1f", -- Down_Windshield {0.0, 1.0} --[879] = "%.1f", -- Left_Windshield {0.0, 1.0} --[878] = "%.1f", -- Right_Windshield {0.0, 1.0} -- Jadro 1A --------------------------------------------------------------- [849] = "%.f", -- Jadro_ASU_Lamp {0.0, 1.0} [848] = "%.f", -- Jadro_Ctl_Lamp {0.0, 1.0} [850] = "%.f", -- Jadro_Breakdown_Lamp {0.0, 1.0} ---- [904] = "%.4f", -- RAM_Temp {-50.0, 0.0, 70.0} {-1.0, 0.0, 1.0} ---- [907] = "%.4f", -- G_Meter {-1.0, 1.0, 3.0} {-1.0, 0.343, 1.0} [908] = "%.4f", -- G_Meter_Max {1.0, 3.0} {0.343, 1.0} [909] = "%.4f", -- G_Meter_Min {-1.0, 1.0} {-1.0, 0.343} ---- [903] = "%1d", -- filter_handle {0,1} ---- [63] = "%.4f", -- SalonTemperature {-70.0, -60.0, -30.0, -20.0, -10.0, 0.0, 10.0, 20.0, 30.0, 60.0, 70.0} {-0.7, -0.593, -0.296, -0.227, -0.125, 0.003, 0.132, 0.233, 0.302, 0.603, 0.693} -- electric system gauges --------------------------------------------------------------- [526] = "%.4f", -- DC_voltage {0.0, 30.0} {0.0, 1.0} [532] = "%.2f", -- AC_voltage {0.0, 100.0, 150.0, 200.0, 250.0} {0.0, 0.14, 0.31, 0.56, 1.0} [493] = "%.4f", -- DC_APU_current {0.0, 400.0} {0.0, 1.0} [527] = "%.4f", -- DC_battery_I_current {0.0, 400.0} {0.0, 1.0} [528] = "%.4f", -- DC_battery_II_current {0.0, 400.0} {0.0, 1.0} [529] = "%.4f", -- DC_VU_I_current {0.0, 400.0} {0.0, 1.0} [530] = "%.4f", -- DC_VU_II_current {0.0, 400.0} {0.0, 1.0} [531] = "%.4f", -- DC_VU_III_current {0.0, 400.0} {0.0, 1.0} [533] = "%.2f", -- AC_generator_I_current {0.0, 50, 70, 90, 120, 130, 140, 150} {0.0, 0.1, 0.2, 0.36, 0.63, 0.75, 0.86, 1.0} [534] = "%.2f", -- AC_generator_II_current {0.0, 50, 70, 90, 120, 130, 140, 150} {0.0, 0.1, 0.2, 0.36, 0.63, 0.75, 0.86, 1.0} [371] = "%.2f", -- AntiIce_ampermeter {0.0, 50, 70, 90, 120, 130, 140, 150} {0.0, 0.1, 0.2, 0.36, 0.63, 0.75, 0.86, 1.0} -- LAMPS --------------------------------------------------------------- [781] = "%.f", -- lamp_AP_heading_on [782] = "%.f", -- lamp_AP_heading_off [783] = "%.f", -- lamp_AP_pitch_roll_on [784] = "%.f", -- lamp_AP_height_on [785] = "%.f", -- lamp_AP_height_off [316] = "%.f", -- lamp_ENGINE_RT_LEFT_ON [317] = "%.f", -- lamp_ENGINE_RT_RIGHT_ON [318] = "%.f", -- lamp_SARPP_ON [325] = "%.f", -- lamp_Descent_Siren [326] = "%.f", -- lamp_LOCK_OPEN [327] = "%.f", -- lamp_DOORS_OPEN [340] = "%.f", -- lamp_TURN_ON_RI_65 [360] = "%.f", -- lamp_FROST [362] = "%.f", -- lamp_LEFT_ENG_HEATING [363] = "%.f", -- lamp_RIGHT_ENG_HEATING [361] = "%.f", -- lamp_ANTI_ICE_ON [364] = "%.f", -- lamp_LEFT_PZU_FRONT [365] = "%.f", -- lamp_RIGHT_PZU_FRONT [366] = "%.f", -- lamp_LEFT_PZU_BACK [367] = "%.f", -- lamp_RIGHT_PZU_BACK [373] = "%.f", -- lamp_SECTION_1 [375] = "%.f", -- lamp_SECTION_2 [374] = "%.f", -- lamp_SECTION_3 [376] = "%.f", -- lamp_SECTION_4 [368] = "%.f", -- lamp_RIO_heating_ok [377] = "%.f", -- lamp_LEFT_ENG_FIRE [378] = "%.f", -- lamp_RIGHT_ENG_FIRE [379] = "%.f", -- lamp_KO50_FIRE [380] = "%.f", -- lamp_REDUC_AI9_FIRE [381] = "%.f", -- lamp_FIRE_LENG_1_QUEUE [382] = "%.f", -- lamp_FIRE_RENG_1_QUEUE [383] = "%.f", -- lamp_FIRE_KO50_1_QUEUE [384] = "%.f", -- lamp_FIRE_REDUCT_1_QUEUE [385] = "%.f", -- lamp_FIRE_LENG_2_QUEUE [386] = "%.f", -- lamp_FIRE_RENG_2_QUEUE [387] = "%.f", -- lamp_FIRE_KO50_2_QUEUE [388] = "%.f", -- lamp_FIRE_REDUCT_2_QUEUE [398] = "%.f", -- lamp_CHECK_SENSORS [407] = "%.f", -- lamp_HYDRO_main_on [408] = "%.f", -- lamp_HYDRO_aux_on [414] = "%.f", -- lamp_APD9_on [416] = "%.f", -- lamp_APD9_oil_pressure [417] = "%.f", -- lamp_APD9_rpm [418] = "%.f", -- lamp_APD9_rpm_high [420] = "%.f", -- lamp_APD_on [424] = "%.f", -- lamp_APD_starter_on [434] = "%.f", -- lamp_FUEL_left_closed [435] = "%.f", -- lamp_FUEL_right_closed [436] = "%.f", -- lamp_FUEL_ring_closed [441] = "%.f", -- lamp_FUEL_center_on [442] = "%.f", -- lamp_FUEL_left_on [443] = "%.f", -- lamp_FUEL_right_on [461] = "%.f", -- lamp_HEATER [462] = "%.f", -- lamp_IGNITION [463] = "%.f", -- lamp_KO50_ON [341] = "%.f", -- lamp_LEFT_PITOT_HEATER_OK [490] = "%.f", -- lamp_RIGHT_PITOT_HEATER_OK [509] = "%.f", -- lamp_LEFT_PZU_ON [510] = "%.f", -- lamp_RIGHT_PZU_ON [504] = "%.f", -- lamp_ELEC_turn_VU1 [505] = "%.f", -- lamp_ELEC_turn_VU2 [506] = "%.f", -- lamp_ELEC_turn_VU3 [507] = "%.f", -- lamp_ELEC_DC_ground [508] = "%.f", -- lamp_ELEC_test_equipment [543] = "%.f", -- lamp_ELEC_gen1_fail [544] = "%.f", -- lamp_ELEC_gen2_fail [545] = "%.f", -- lamp_ELEC_AC_ground [546] = "%.f", -- lamp_ELEC_PO_500 [86] = "%.f", -- lamp_CIRCUIT_FROM_BATTERY [68] = "%.f", -- lamp_CLOG_TF_LEFT [69] = "%.f", -- lamp_CLOG_TF_RIGHT [70] = "%.f", -- lamp_CHIP_LEFT_ENG [71] = "%.f", -- lamp_CHIP_RIGHT_ENG [72] = "%.f", -- lamp_VIBRATION_LEFT_HIGH [73] = "%.f", -- lamp_VIBRATION_RIGHT_HIGH [74] = "%.f", -- lamp_FIRE [76] = "%.f", -- lamp_LEFT_ENG_TURN_OFF [77] = "%.f", -- lamp_RIGHT_ENG_TURN_OFF [78] = "%.f", -- lamp_FT_LEFT_HIGH [79] = "%.f", -- lamp_FT_RIGHT_HIGH [80] = "%.f", -- lamp_OIL_PRESSURE_LEFT [81] = "%.f", -- lamp_OIL_PRESSURE_RIGHT [82] = "%.f", -- lamp_ER_LEFT [83] = "%.f", -- lamp_ER_RIGHT [84] = "%.f", -- lamp_EEC_LEFT_OFF [85] = "%.f", -- lamp_EEC_RIGHT_OFF [873] = "%.f", -- lamp_CHIP_MAIN_REDUCTOR [874] = "%.f", -- lamp_CHIP_INTER_REDUCTOR [875] = "%.f", -- lamp_CHIP_TAIL_REDUCTOR [64] = "%.f", -- lamp_300_Left [65] = "%.f", -- lamp_DISS_OFF [555] = "%.f", -- lamp_BD1 [556] = "%.f", -- lamp_BD2 [557] = "%.f", -- lamp_BD3 [558] = "%.f", -- lamp_BD4 [559] = "%.f", -- lamp_BD5 [560] = "%.f", -- lamp_BD6 [711] = "%.f", -- lamp_BD1Bomb [712] = "%.f", -- lamp_BD2Bomb [713] = "%.f", -- lamp_BD3Bomb [714] = "%.f", -- lamp_BD4Bomb [715] = "%.f", -- lamp_BD5Bomb [716] = "%.f", -- lamp_BD6Bomb [562] = "%.f", -- lamp_PUS1 [563] = "%.f", -- lamp_PUS3 [564] = "%.f", -- lamp_PUS4 [565] = "%.f", -- lamp_PUS6 [561] = "%.f", -- lamp_EmergExplode [705] = "%.f", -- lamp_EmergExplodeSec [710] = "%.f", -- lamp_BV_Net_On [566] = "%.f", -- lamp_RS_Net_On [567] = "%.f", -- lamp_GUV_Net_On --[] = "%.f", -- lamp_MV_Net_On [568] = "%.f", -- lamp_FKP_On [778] = "%.f", -- lamp_Caution_Weap --[] = "%.f", -- lamp_LeftSignal --[] = "%.f", -- lamp_RightSignal [586] = "%.f", -- lamp_Caution_Weap1 [587] = "%.f", -- lamp_Caution_Weap2 [588] = "%.f", -- lamp_Caution_Weap3 [306] = "%.f", -- lamp_Record_P503B [302] = "%.f", -- lamp_IFF_KD [303] = "%.f", -- lamp_IFF_KP [912] = "%.f", -- lamp_IFF_TurnOnReserve [87] = "%.f", -- lamp_IFF_Failure -- Lights system --------------------------------------------------------------- [880] = "%.f", -- RedLightLhGr1 {1.0, 0.0} [896] = "%.f", -- RedLightLhGr2 {1.0, 0.0} [897] = "%.f", -- RedLightRhGr1 {1.0, 0.0} [898] = "%.f", -- RedLightRhGr2 {1.0, 0.0} [899] = "%.f", -- RedLightChGr1 {1.0, 0.0} [901] = "%.f", -- RedLightChGr2 {1.0, 0.0} [922] = "%.f", -- RedLightChGr12 {1.0, 0.0} [902] = "%.f", -- RedLight5V5 {1.0, 0.0} [900] = "%.f", -- PlafondBrightness {1.0, 0.0} [547] = "%.f", -- LeftPlafond {1.0, 0.0} [665] = "%.f", -- RightPlafond {1.0, 0.0} [920] = "%.f" -- RecorderP503B_PanelLightness {1.0, 0.0} -- Windshield Wiper --[254] = "%.4f" -- WindscreenWiperL {0.0, 1.0} --[255] = "%.4f" -- WindscreenWiperR {0.0, 1.0} } ExportScript.ConfigArguments = { --[[ arguments for export in low tick interval based on "clickabledata.lua" ]] -- ELEC_INTERFACE --[536] = "%.1f", -- PTR-EEP-LVR-ADJV1 (AC Voltage 1 set rotary) {-1, 1} --[537] = "%.1f", -- PTR-EEP-LVR-ADJV2 (AC Voltage 2 set rotary) {-1, 1} [538] = "%1d", --PTR-EEP-TMB-GEN1 (Generator 1) [539] = "%1d", --PTR-EEP-TMB-GEN2 (Generator 2) [540] = "%1d", --PTR-EEP-TMB-AER (AC ground power) [541] = "%1d", --PTR-EEP-TMB-PO (115V Inverter) [542] = "%1d", --PTR-EEP-TMB-PT (36V Inverter) [535] = "%.1f", --PTR-EEP-LVR-MODE (AC Mode), 11 degrees [494] = "%.1f", --PTR-RSPE-LVR-FEEDMODE (DC Bus Selector), 8 degrees [495] = "%1d", --PTR-RSPE-TMB-AKK1 (Battery 1) [496] = "%1d", --PTR-RSPE-TMB-AKK2 (Battery 2) [497] = "%1d", --PTR-RSPE-TMB-RESGEN (Standby Generator) --[498] = "%.1f", -- PTR-RSPE-LVR-V (DC Voltage set rotary) {-1, 1} [499] = "%1d", --PTR-RSPE-TMB-RECT1 (Rectifier 1) [500] = "%1d", --PTR-RSPE-TMB-RECT2 (Rectifier 2) [501] = "%1d", --PTR-RSPE-TMB-RECT3 (Rectifier 3) [502] = "%1d", --PTR-RSPE-TMB-AERF (DC ground power) [503] = "%1d", --PTR-RSPE-TMB-TESTEQU (Equipment Test) [147] = "%1d", --PTR-APP-CVR-CIRC (Standby Rectifier Cover) [148] = "%1d", --PTR-APP-TMB-CIRC (Standby Rectifier) [149] = "%1d", --PTR-APP-TMB-TRNS (36V Transformer) [498] = "%.4f", --PTR-RSPE-LVR-V (Standby Generator Voltage Adjustment Rheostat) [536] = "%.4f", --PTR-EEP-LVR-ADJV1 (Generator 1 Voltage Adjustment Rheostat) [537] = "%.4f", --PTR-EEP-LVR-ADJV2 (Generator 2 Voltage Adjustment Rheostat) [522] = "%.4f", --PTR-RSPE-TMB-WRMAKK (Battery Heating Switch, ON/OFF) [590] = "%1d", --PTR-LAZS-TMB-BV-ZSBR (BW ESBR) [591] = "%1d", --PTR-LAZS-TMB-BV-EXP (Explode) [592] = "%1d", --PTR-LAZS-TMB-BV-DIR (Control) [593] = "%1d", --PTR-LAZS-TMB-BV-EQU (Equipment) [594] = "%1d", --PTR-LAZS-TMB-RSGUV-FIRE (RS/GUV Fire) [595] = "%1d", --PTR-LAZS-TMB-RSGUV-SIGN (RS/GUV Warning) [596] = "%1d", --PTR-LAZS-TMB-RSGUV-WARM (ESBR Heating) [597] = "%1d", --PTR-LAZS-TMB-311 (GUV Out 800 Left) [598] = "%1d", --PTR-LAZS-TMB-GUOUT-800L (GUV Out 800 Left) [599] = "%1d", --PTR-LAZS-TMB-GUOUT-800R (GUV Out 800 Right) [600] = "%1d", --PTR-LAZS-TMB-GUOUTL-622L (GUV In Left 622 Left) [601] = "%1d", --PTR-LAZS-TMB-GUOUTL-622R (GUV In Left 622 Right) [602] = "%1d", --PTR-LAZS-TMB-GUOUTR-622L (GUV In Right 622 Left) [603] = "%1d", --PTR-LAZS-TMB-GUOUTR-622R (GUV In Rignt 622 Right) [604] = "%1d", --PTR-LAZS-TMB-ES-800L (Electric Launch 800 Left) [605] = "%1d", --PTR-LAZS-TMB-ES-622R (Electric Launch 800 Right) [606] = "%1d", --PTR-LAZS-TMB-PKT (PKT) [607] = "%1d", --PTR-LAZS-TMB-JETBOMB (Emergency Jettison) [608] = "%1d", --PTR-LAZS-TMB-JETPWR (Power Jettison) [609] = "%1d", --PTR-LAZS-TMB-JETEXPL (Emergency Jettison) [610] = "%1d", --PTR-LAZS-TMB-JETRCKT (Alarm rockets) [611] = "%1d", --PTR-RAZS-TMB-START-TRBON (CB APU start) [612] = "%1d", --PTR-RAZS-TMB-START-TRBIGN (CB APU ignition) [613] = "%1d", --PTR-RAZS-TMB-START-ENGON (CB Engine start) [614] = "%1d", --PTR-RAZS-TMB-START-ENGIGN (CB Engine ignition) [615] = "%1d", --PTR-RAZS-TMB-RPM (CB RPM CONTROL) [616] = "%1d", --PTR-NONAME (CB NONAME) [617] = "%1d", --PTR-SW-LOCKER-BASE (CB Lock Opening Control Main) [618] = "%1d", --PTR-SW-LOCKER-RES (CB Lock Opening Control Reserve) [619] = "%1d", --PTR-RAZS-TMB-TURN (CB TURN INDICATOR) [629] = "%1d", --PTR-RAZS-TMB-TSCOCK-ON (CB Bypass) [630] = "%1d", --PTR-RAZS-TMB-TSCOCK-L (CB Left valve) [631] = "%1d", --PTR-RAZS-TMB-TSCOCK-R (CB Right valve) [632] = "%1d", --PTR-RAZS-TMB-TSCOUNT (CB Fuelmeter) [633] = "%1d", --PTR-RAZS-TMB-TSPMP-C (CB Center tank) [634] = "%1d", --PTR-RAZS-TMB-TSPMP-L (CB Left pump) [635] = "%1d", --PTR-RAZS-TMB-TSPMP-R (CB Right pump) [636] = "%1d", --PTR-RAZS-TMB-T819 (CB T-819) [637] = "%1d", --PTR-RAZS-TMB-SPPU52 (CB SPUU-52) [647] = "%1d", --PTR-RAZS-TMB-HLGT-DIR-L (SPOT CONTROL LEFT) [648] = "%1d", --PTR-RAZS-TMB-HLGT-ON-L (SPOT ON LEFT) [649] = "%1d", --PTR-RAZS-TMB-HLGT-DIR-R (SPOT CONTROL RIGHT) [650] = "%1d", --PTR-RAZS-TMB-HLGT-ON-R (SPOT ON RIGHT) [651] = "%1d", --PTR-RAZS-TMB-ANO (ANO) [652] = "%1d", --PTR-RAZS-TMB-WNGLGT (WING LIGHTS) [653] = "%1d", --PTR-RAZS-TMB-LAMPTEST (CHECK LAMPS/FLASHER) --[654] = "%1d", -- PTR-RAZS-TMB-DIRMAIN (LOCK MAIN) --[655] = "%1d", -- PTR-RAZS-TMB-DIRDUB (LOCK SPARE) [918] = "%1d", --PTR-SW-LIGHT-PRF4-LEFT (CB PRF-4 Light Left) [919] = "%1d", --PTR-SW-LIGHT-PRF4-RIGHT (CB PRF-4 Light Right) [620] = "%1d", --PTR-RAZS-TMB-APMAIN (CB Autopilot MAIN) [621] = "%1d", --PTR-RAZS-TMB-APFRICT (CB Autopilot Frict) [622] = "%1d", --PTR-RAZS-TMB-APELCT (CB Autopilot Clutch) [623] = "%1d", --PTR-RAZS-TMB-GSMAIN (CB Hydro Main) [624] = "%1d", --PTR-RAZS-TMB-GSDBL (CB Hydro Aux) [625] = "%1d", --PTR-RAZS-TMB-RADSPU (CB SPU (Intercom)) [626] = "%1d", --PTR-RAZS-TMB-RADALT (CB Radio Altimeter) [627] = "%1d", --PTR-RAZS-TMB-RADCOMM (CB Command Radio Station (R-863)) [628] = "%1d", --PTR-RAZS-TMB-RADRS (CB 6201) [638] = "%1d", --PTR-RAZS-TMB-PPSSIGN (CB Signalization) [639] = "%1d", --PTR-RAZS-TMB-PPSQUE1-L (CB 1 Queue Left) [640] = "%1d", --PTR-RAZS-TMB-PPSQUE1-R (CB 1 Queue Right) [641] = "%1d", --PTR-RAZS-TMB-PPSQUE2-L (CB 2 Queue Left) [642] = "%1d", --PTR-RAZS-TMB-PPSQUE2-R (CB 2 Queue Right) [643] = "%1d", --PTR-RAZS-TMB-RADCMP-SV (CB Radio Compass MW(ARC-9)) [644] = "%1d", --PTR-RAZS-TMB-RADCMP-UKV (CB Radio Compass VHF(ARC-UD)) [645] = "%1d", --PTR-RAZS-TMB-RADDISS (CB Doppler Navigator) [646] = "%1d", --PTR-RAZS-TMB-RADRNTG (CB Radio Meter) [656] = "%1d", --PTR-RAZS-TMB-POSDIR (CONTROL) [657] = "%1d", --PTR-RAZS-TMB-POSPZUENG-L (LEFT ENGINE) [658] = "%1d", --PTR-RAZS-TMB-POSPZUENG-R (RIGHT ENGINE) [659] = "%1d", --PTR-RAZS-TMB-POSRIO3 (RIO-3) [660] = "%1d", --PTR-RAZS-TMB-POSGLS (WINDOW) [661] = "%1d", --PTR-RAZS-TMB-WIPER-L (LEFT ENGINE) [662] = "%1d", --PTR-RAZS-TMB-WIPER-R (RIGHT ENGINE) [663] = "%1d", --PTR-RAZS-TMB-L1800 (RIO-3) [664] = "%1d", --PTR-RAZS-TMB-KO50 (WINDOW) [882] = "%1d", --PTR-GRAZS-1 (CB Group 1) [883] = "%1d", --PTR-GRAZS-2 (CB Group 4) [884] = "%1d", --PTR-GRAZS-3 (CB Group 7) [885] = "%1d", --PTR-GRAZS-4 (CB Group 2) [886] = "%1d", --PTR-GRAZS-5 (CB Group 5) [887] = "%1d", --PTR-GRAZS-6 (CB Group 8) [888] = "%1d", --PTR-GRAZS-7 (CB Group 3) [889] = "%1d", --PTR-GRAZS-8 (CB Group 6) [890] = "%1d", --PTR-GRAZS-9 (CB Group 9) ------------------------------------------------------------- -- FUELSYS INTERFACE [438] = "%1d", --PTR-CPE-TMB-PUMP-RATE (Service tank pump) [439] = "%1d", --PTR-CPE-TMB-PUMPTNK-L (Left fuel tank pump) [440] = "%1d", --PTR-CPE-TMB-PUMPTNK-R (Right fuel tank pump) [427] = "%1d", --PTR-CPE-TMB-PUMP-L (Left Engine Shutoff Valve) [429] = "%1d", --PTR-CPE-TMB-PUMP-R (Right Engine Shutoff Valve) [426] = "%1d", --PTR-CPE-CVR-PUMP-L (Left Engine Shutoff Valve Cover) [428] = "%1d", --PTR-CPE-CVR-PUMP-R (Right Engine Shutoff Valve Cover) [431] = "%1d", --PTR-CPE-TMB-PUMP-RING (Crossfeed) [430] = "%1d", --PTR-CPE-CVR-PUMP-RING (Crossfeed Cover) [433] = "%1d", --PTR-CPE-TMB-PUMP-PASS (Bypass) [432] = "%1d", --PTR-CPE-CVR-PUMP-PASS (Bypass Cover) [437] = "%.1f", --PTR-CPE-TMB-PUMP-CONTR (Refueling Control Switch) ------------------------------------------------------------- -- ENGINE INTERFACE [412] = "%1d", --PTR-CPE-TMB-TURBOSTART-ST (APU start mode) [413] = "%1d", --PTR-CPE-BTN-TURBOSTART-ON (APU start) [415] = "%1d", --PTR-CPE-BTN-TURBOSTART-OFF (APU stop) [419] = "%1d", --PTR-CPE-BTN-ENGSTART-ON (Engine start ON) [421] = "%1d", --PTR-CPE-BTN-ENGSTART-OFF (Engine start OFF) [422] = "%1d", --PTR-CPE-TMB-ENGSTART-LFTRGT (Select engine) [423] = "%1d", --PTR-CPE-TMB-ENGSTART-ROLL (Engine start mode) [425] = "%1d", -- PTR-CPE-BTN-ENGSTART-TEST (Engine ignition check) [204] = "%1d", --PTR-ENGSTOP-ARM-L (Left engine stop) [206] = "%1d", --PTR-ENGSTOP-ARM-R (Right engine stop) [208] = "%1d", --PTR-VINTBRAKE-ARM (Rotor brake) [310] = "%1d", --PTR-LSPE-BTN-CONTR-IV500 (Vibration Sensor Test) [311] = "%1d", --PTR-LSPE-BTN-CONTR-GRND (Temperature Sensor Test Cold) [312] = "%1d", --PTR-LSPE-BTN-CONTR-AIR (Temperature Sensor Test Hot) [313] = "%1d", --PTR-LSPE-BTN-CONTR-RTL (Temperature Regulator Test Left) [314] = "%1d", --PTR-LSPE-BTN-CONTR-RTR (Temperature Regulator Test Right) [202] = "%1d", --PTR-STKSGR-TMB-RPM-LEFT [867] = "%1d", --PTR-STKSGR-TMB-RPM-RIGHT --[0] = "%.4f", --PTR-STKSEC-ARM-L (Left Engine Throttle) --[0] = "%.4f", --PTR-STKSEC-ARM-R (Right Engine Throttle) --[0] = "%.4f", --PKT-TROTTLE_L (Left Collective / Throttle) --[0] = "%.4f", --PKT-TROTTLE_R (Right Collective / Throttle) [167] = "%1d", --PTR-APP-TMB-ERD-L (EEC Left) [173] = "%1d", --PTR-APP-TMB-ERD-R (EEC Right) [168] = "%1d", --PTR-APP-TMB-CHR-L (ER Left) [172] = "%1d", --PTR-APP-TMB-CHR-R (ER Right) [169] = "%1d", --PTR-APP-TMB-ST-L (FT Check Left) [171] = "%1d", --PTR-APP-TMB-ST-R (FT Check Right) [170] = "%1d", --PTR-APP-TMB-TKLR (CT check) ------------------------------------------------------------- -- HYDRO SYS INTERFACE [406] = "%1d", --PTR-CPE-TMB-HYDRO-MAIN (Main Hydro) [410] = "%1d", --PTR-CPE-TMB-HYDRO-DBL (Aux Hydro) [409] = "%1d", --PTR-CPE-CVR-HYDRO-DBL (Aux Hydro Cover) [411] = "%1d", --PTR-CPE-BTN-DBLOFF (Aux Hydro Off) ------------------------------------------------------------- -- AUTOPILOT [134] = "%1d", --PTR-APP-BTN-DIRON (Autopilot Heading ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Button [868] = "%.4f", --PTR-APP-BTN-DIRON (Autopilot Heading ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Axis [135] = "%1d", --PTR-APP-BTN-DIROFF (Autopilot Heading OFF/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Button [869] = "%.4f", --PTR-APP-BTN-DIROFF (Autopilot Heading OFF/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Axis [138] = "%1d", --PTR-APP-BTN-KTON (Autopilot Pitch/Roll ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Button [870] = "%.4f", --PTR-APP-BTN-KTON (Autopilot Pitch/Roll ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Axis [144] = "%1d", --PTR-APP-BTN-ALTON (Autopilot Altitude ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Button [871] = "%.4f", --PTR-APP-BTN-ALTON (Autopilot Altitude ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Axis [145] = "%1d", --PTR-APP-BTN-ALTOFF (Autopilot Altitude OFF/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Button [872] = "%.4f", --PTR-APP-BTN-ALTOFF (Autopilot Altitude OFF/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Axis [146] = "%1d", --PTR-APP-BTN-CONTR (Autopilot Altitude Channel Control) [136] = "%.4f", --PTR-APP-LVR-DIR (Autopilot Heading Adjustment) [140] = "%.4f", --PTR-APP-LVR-K (Autopilot Roll Adjustment) [142] = "%.4f", --PTR-APP-LVR-T (Autopilot Pitch Adjustment) [183] = "%1d", --PTR-AUTOPILOT-OFF-L (Autopilot Off Left Button) [226] = "%1d", --PTR-AUTOPILOT-OFF-R (Autopilot Off Right Button) ------------------------------------------------------------- -- RADAR ALTIMETER [32] = "%1d", --PTR-ALTR-LVR-TEST (Radio altimeter test) [29] = "%.4f", --PTR-ALTR-LVR-SET (Dangerous RALT set rotary) {0, 1} [35] = "%1d", --PTR-ALTR-TMB-ONOFF (Radar Altimeter Power) ------------------------------------------------------------- -- BAR ALTIMETER [18] = "%.4f", --PTR-ALTB-LVR-SET (Baro pressure QFE knob) [97] = "%.4f", --PTR-ALTB-LVR-SET-R (Baro pressure QFE knob) ------------------------------------------------------------- -- VARIOMETER [17] = "%.4f", --PTR-VARIO-LVR-SET-L (Variometer adjustment knob) [96] = "%.4f", --PTR-VARIO-LVR-SET-R (Variometer adjustment knob) ------------------------------------------------------------- --HSI [26] = "%.4f", --PTR-PNP-LVR-SET (HSI Course set knob) [858] = "%1d", --PTR-ARKSV-ARKUKV (HSI ARC-9/ARC-UD Select) [102] = "%.4f", --PTR-PNP-LVR-SET-R (HSI Course set knob) ------------------------------------------------------------- -- FUELSYS INTERFACE [61] = "%.1f", --PTR-FUEL-LVR-MODE (Fuel meter switch) ------------------------------------------------------------- -- WEAPON SYS [921] = "%1d", --PTR-SAFE-WEAPON (Weapon Safe-Armed) [707] = "%1d", --PTR-ADDPBV-TMB-EMRGEXP (Emergency Explode) [706] = "%1d", --PTR-ADDPBV-CVR-EMRGEXP (Emergency Explode Cover) [709] = "%1d", --PTR-ADDPBV-TMB-EMRGJET (Emergency Release) [708] = "%1d", --PTR-ADDPBV-CVR-EMRGJET (Emergency Release Cover) [717] = "%1d", --PTR-ADDPBV-TMB-MAINOFF (Main Bombs) [718] = "%1d", --PTR-ADDPBV-BTN-LAMPTEST (Lamps Check) [719] = "%.1f", --PTR-ADDPBV-LVR-MODE (Pod Variants) [720] = "%1d", --PTR-ADDPBV-TMB-WARM (ESBR Heat) [730] = "%.4f", --PTR-ADDESBR-LVR-MODE (ESBR Position) [731] = "%1d", --PTR-ADDESBR-LVR-ONOFF (ESBR On/Off) [570] = "%1d", --PTR-LAZS-TMB-EMRGEXP (Emergency Explode) [572] = "%1d", --PTR-LAZS-TMB-EMRGJET (Emergency Release) [569] = "%1d", --PTR-LAZS-CVR-EMRGEXP (Emergency Explode Cover) [571] = "%1d", --PTR-LAZS-CVR-EMRGJET (Emergency Release Cover) --[573] = "%1d", -- PTR-LAZS-TMB-MAINOFF (Main On/Off) [575] = "%1d", --PTR-LAZS-TMB-RSGUV (RS/GUV Selector) [576] = "%1d", --PTR-LAZS-BTN-LAMPTEST (Lamps Check) [574] = "%1d", --PTR-LAZS-BTN-ENTER (PUS Arming) [342] = "%1d", --PTR-LPE-TMB-SHOOT1 (8/16/4) [343] = "%1d", --PTR-LPE-TMB-SHOOT2 (1256/AUTO/34) [344] = "%1d", --PTR-LPE-TMB-RS (UPK/PKT/RS) [345] = "%1d", --PTR-LPE-TMB-GUV (CUTOFF) [349] = "%1d", --PTR-LAZS-TMB-MAINOFF05 (800_or_624_622_800) [348] = "%1d", --PTR-LAZS-CVR-EMRGEXP01 (800 or 624_622_800 Cover) [347] = "%.4f", --PTR-LPE-TMB-VAR (In800Out/800inOr624/622) [346] = "%.4f", --PTR-LPE-LVR-SHELL (Burst length) [350] = "%.4f", --PTR-LPE-TMB-PYRO-L (PYROCARTRIDGE Left) [351] = "%.4f", --PTR-LPE-TMB-PYRO-R (PYROCARTRIDGE Right) [573] = "%1d", --PTR-LAZS-TMB-MAINOFF (Mine Arms Main Switch) [905] = "%1d", --PTR-RSPE-TMB-PKT (PKT Selector Switch) ------------------------------------------------------------- -- SYS CONTROLLER [523] = "%1d", --PTR-RSPE-TMB-WINK (FLASHER) [525] = "%1d", --PTR-RSPE-TMB-TAB (Transparent Day/Night) [150] = "%1d", --PTR-APP-TMB-TEST (CHECK LAMPS/FLASHER) ------------------------------------------------------------- -- SPUU-52 [332] = "%1d", --PTR-LES-TMB-SPPU52 (SPUU-52 Power) [127] = "%1d", --PTR-APP-BTN-OFF (SPUU-52 Control Engage) [129] = "%1d", --PTR-APP-TMB-RT (SPUU-52 Control (Left button - P. Right button - t)) [128] = "%.4f", --PTR-APP-LVR-ADJ (SPUU 52 Control Adjustment) ------------------------------------------------------------- -- FIRE EXTING INTERFACE [389] = "%1d", --PTR-CPE-BTN-QUE1-1 (Main Discharge L ENG) [390] = "%1d", --PTR-CPE-BTN-QUE1-2 (Main Discharge R ENG) [391] = "%1d", --PTR-CPE-BTN-QUE1-3 (Main Discharge KO-50) [392] = "%1d", --PTR-CPE-BTN-QUE1-4 (Main Discharge APU GEAR) [393] = "%1d", --PTR-CPE-BTN-QUE2-1 (Alternate Discharge L ENG) [394] = "%1d", --PTR-CPE-BTN-QUE2-2 (Alternate Discharge R ENG) [395] = "%1d", --PTR-CPE-BTN-QUE2-3 (Alternate Discharge KO-50) [396] = "%1d", --PTR-CPE-BTN-QUE2-4 (Alternate Discharge APU GEAR) [397] = "%1d", --PTR-CPE-BTN-FIRE-OFF (Turn Off Fire Signal) [399] = "%1d", --PTR-CPE-TMB-CONTR-FIRE (Fire Detector Test) [400] = "%1d", --PTR-CPE-TMB-CONTR-PYRO (Squib Test) [401] = "%.1f", --PTR-CPE-LVR-CONTR-MODE (Check Fire circuits) ------------------------------------------------------------- -- ENGINE INTERFACE [353] = "%1d", --PTR-LPE-TMB-MANAUT (AUTO-MANUAL) [354] = "%1d", --PTR-LPE-BTN-OVR (GENERAL OFF) [355] = "%1d", --PTR-LPE-TMB-PZU-L (LEFT ENGINE) [356] = "%1d", --PTR-LPE-TMB-PZU-R (RIGHT ENGINE) [357] = "%1d", --PTR-LPE-TMB-GLASS (WINDOW) [358] = "%1d", --PTR-LPE-TMB-RIO (Ice Detector Heater) [359] = "%1d", --PTR-LPE-BTN-RIOCONTR (Ice Detector Heater Test) [372] = "%.1f", --PTR-LPE-LVR-FEEDMODE (Anti Ice Sections Current) [519] = "%1d", --PTR-RSPE-TMB-WRMPVD-L (Left Pitot Heater) [520] = "%1d", --PTR-RSPE-TMB-WRMPVD-R (Right Pitot Heater) [339] = "%1d", --PTR-LES-BTN-CONTRPVD (Left Pitot Heater Control) [482] = "%1d", --PTR-LES-BTN-CONTRPVD01 (Right Pitot Heater Control) ------------------------------------------------------------- -- DISS 15 [483] = "%1d", --PTR-RES-TMB-DISS (Doppler Navigator, Power) [818] = "%1d", --PTR-DISS-BTN-OFF (Turn Off Coordinates Calculator) [819] = "%1d", --PTR-DISS-BTN-ON (Turn On Coordinates Calculator) [815] = "%1d", --PTR-DISS-BTN-MINUS (Decrease Map Angle) [816] = "%1d", --PTR-DISS-BTN-PLUS (Increase Map Angle) [809] = "%1d", --PTR-DISS-BTN-N (Decrease Path KM) [810] = "%1d", --PTR-DISS-BTN-V (Increase Path KM) [803] = "%1d", --PTR-DISS-BTN-TOLE (Decrease Deviation KM) [804] = "%1d", --PTR-DISS-BTN-TORI (Increase Deviation KM) [826] = "%.1f", --PTR-IND-DISS-SELECTOR (Mode Switch) [797] = "%1d", --PTR-DISS-SELECTOR-KR (Test/Work) [798] = "%1d", --PTR-DISS-SELECTOR-SM (Land/Sea) ------------------------------------------------------------- -- ADI [487] = "%1d", --PTR-RES-TMB-AG (Right Attitude Indicator Power) [335] = "%1d", --PTR-LES-TMB-AG (Left Attitude Indicator Power) [11] = "%1d", --PTR-AGB-LVR-KNOB (Left Attitude Indicator Cage) [10] = "%.4f", --PTR-AGB-LVR-SET (Left Attitude Indicator Zero pitch trim) [90] = "%1d", --PTR-AGB-LVR-KNOB-R (Right Attitude Indicator Cage) [89] = "%.4f", --PTR-AGB-LVR-SET-R (Right Attitude Indicator Zero pitch trim) ------------------------------------------------------------- -- [336] = "%1d", --PTR-LES-TMB-VK53 (VK-53, Power) ------------------------------------------------------------- -- GMK1A [485] = "%1d", --PTR-RES-TMB-GMK (GMC Power) [470] = "%1d", --PTR-RPE-LVR-CRDNS (GMC Hemisphere Selection) [472] = "%1d", --PTR-RPE-LVR-CRDMK (GMC Mode (MC, DG, AC(N/F))) [476] = "%.1f", --PTR-RPE-LVR-CRDCONTR (GMC Control (Left - 0, Right - 300)) {-1.0,0.0,1.0} [477] = "%.1f", --PTR-RPE-LVR-CRDZK (GMC Course Setting (Left - CCW, Right - CW)) {-1.0,0.0,1.0} [474] = "%.4f", --PTR-RPE-LVR-CRDLAT (GMC Latitude Selection) ------------------------------------------------------------- -- ENGINE INTERFACE [517] = "%1d", --PTR-RSPE-TMB-PZUENG-L (Dust Protection Left) [518] = "%1d", --PTR-RSPE-TMB-PZUENG-R (Dust Protection Right) ------------------------------------------------------------- -- Nav Lights System [513] = "%1d", --PTR-RSPE-TMB-ANO (ANO) [514] = "%1d", --PTR-RSPE-TMB-LGTWING (Formation Lights) [515] = "%1d", --PTR-RSPE-TMB-LGTCONT (Tip Lights) [516] = "%1d", --PTR-RSPE-TMB-BEAC (Strobe Light) [322] = "%1d", --PTR-LSPE-TMB-AIR-CODE (ANO code) [836] = "%1d", --PTR-LEFT-TAXI-L-SW (Taxi Light) [837] = "%1d", --PTR-LEFT-TAXI-L-POS-SW (Left Landing Light) [838] = "%1d", --PTR-LEFT-TAXI-R-POS-SW (Right Landing Light) ------------------------------------------------------------- -- Lights System [333] = "%1d", --PTR-LES-TMB-PLF (Left Ceiling Light) [489] = "%1d", --PTR-RES-TMB-PLF (Right Ceiling Light) [479] = "%1d", --PTR-RES-TMB-LGT (5.5V Lights) [280] = "%.4f", --PTR-LSPE-LVR-REDGRP1 (Lh RedLights Brightness Rst gr.1) {0.0, 1.0} [281] = "%.4f", --PTR-LSPE-LVR-REDGRP2 (Lh RedLights Brightness Rst gr.2) {0.0, 1.0} [491] = "%.4f", --PTR-RSPE-LVR-REDGRP1 (Rh RedLights Brightness Rst gr.1) {0.0, 1.0} [492] = "%.4f", --PTR-RSPE-LVR-REDGRP2 (Rh RedLights Brightness Rst gr.2) {0.0, 1.0} [894] = "%.4f", --PTR-RSPE-LVR-REDGRP003 (Central RedLights Brightness Rst gr.1) {0.0, 1.0} [895] = "%.4f", --PTR-RSPE-LVR-REDGRP004 (Central RedLights Brightness Rst gr.2) {0.0, 1.0} [914] = "%.4f", --PTR-RSPE-LVR-REDGRP005 (5.5V Lights Brightness Rheostat) [511] = "%1d", --PTR-RSPE-TMB-DUTY (Cargo Cabin Duty Lights Switc) [512] = "%1d", --PTR-RSPE-TMB-ALL (Cargo Cabin Common Lights Switch) ------------------------------------------------- -- RADIO EQUIPMENT -- SPU-7 -- Left [549] = "%.4f", --PTR-LAZS-LVR-ALL (Common Volume) [548] = "%.4f", --PTR-LAZS-LVR-AUDIT (Listening Volume) [553] = "%1d", --PTR-LAZS-TMB-RADSPU (Radio/ICS) [551] = "%1d", --PTR-LAZS-TMB-CIRC (Network 1/2 (N/F)) [552] = "%1d", --PTR-LAZS-BTN-CB (Circular Call (N/F)) [550] = "%.1f", --PTR-LAZS-LVR-MODES (Radio Source (R-863/JADRO-1A/R-828/NF/ARC-9/ARC-UD)) -- Right [841] = "%.4f", --PTR-RAZS-LVR-ALL002 (Common Volume) [840] = "%.4f", --PTR-RAZS-LVR-AUDIT002 (Listening Volume) [845] = "%1d", --PTR-RAZS-TMB-RADSPU002 (Radio/ICS) [843] = "%1d", --PTR-RAZS-TMB-CIRC002 (Network 1/2 (N/F)) [846] = "%1d", --PTR-RAZS-BTN-CB002 (Circular Call (N/F)) [842] = "%.1f", --PTR-RAZS-LVR-MODES002 (Radio Source (R-863/JADRO-1A/R-828/NF/ARC-9/ARC-UD)) --[194] = "%.4f", -- RADIO/ICS-1-PTR (Radio/ICS) [480] = "%1d", --PTR-RES-TMB-LARING (Laryngophone) ------------------------------------------------------------- -- R-863 [369] = "%1d", --PTR-LPE-TMB-COMAND (R-863, Select FM/AM) [132] = "%1d", --PTR-APP-TMB-NU (R-863, Dial/Memory Unit) [370] = "%1d", --PTR-LPE-LVR-CHANNEL (R-863, Radio channel selector) [155] = "%1d", --PTR-APP-TMB-PS (R-863, Squelch) [156] = "%.4f", --PTR-APP-LVR-LEVEL (R-863, Volume) [163] = "%.4f", --PTR-APP-LVR-SEL1 (R-863, 10MHz rotary) {-0.1, 0.1} [164] = "%.4f", --PTR-APP-LVR-SEL2 (R-863, 1MHz rotary) {-0.1, 0.1} [165] = "%.4f", --PTR-APP-LVR-SEL3 (R-863, 100kHz rotary) {-0.1, 0.1} [166] = "%.4f", --PTR-APP-LVR-SEL4 (R-863, 1kHz rotary) {-0.1, 0.1} [153] = "%1d", --PTR-APP-TMB-AP (R-863, Emergency Receiver On/Off (N/F)) [154] = "%1d", --PTR-APP-TMB-RK (R-863, ARC (N/F)) ------------------------------------------------------------- -- R-828 [735] = "%1d", --PTR-ADDSECPLT-LVR-CHNL (R-828 Radio channel selector) [737] = "%.4f", --PTR-ADDSECPLT-LVR-VOL (R-828 Radio volume) [738] = "%1d", --PTR-ADDSECPLT-BTN-ASU (R-828 Radio Tuner button) [739] = "%1d", --PTR-ADDSECPLT-TMB-PSH (R-828 Radio Squelch) [756] = "%1d", --PTR-ADDSECPLT-TMB-P828 (R-828 Radio, Power) [757] = "%1d", --PTR-ADDSECPLT-TMB-MODSEL (R-828 Radio, COMM/NAV) ------------------------------------------------------------- -- Jadro-1A [484] = "%1d", --PTR-RES-TMB-RS (Jadro 1A, Power) [745] = "%.4f", --PTR-ADDSECPLT-LVR-DIG12 (Jadro 1A, Frequency Selector, 1MHz) {-0.1, 0.1} [746] = "%.4f", --PTR-ADDSECPLT-LVR-DIG3 (Jadro 1A, Frequency Selector, 100kHz) {-0.1, 0.1} [747] = "%.4f", --PTR-ADDSECPLT-LVR-DIG4 (Jadro 1A, Frequency Selector, 10kHz) {-0.1, 0.1} [748] = "%.4f", --PTR-ADDSECPLT-LVR-DIG6 (Jadro 1A, Frequency Selector, Left mouse - 1kHz/ Right mouse - 100Hz) [749] = "%.4f", --PTR-ADDSECPLT-LVR-DIG6 (Jadro 1A, Frequency Selector, Left mouse - 1kHz/ Right mouse - 100Hz) [744] = "%.1f", --PTR-ADDSECPLT-LVR-ONOFF (Jadro 1A, Mode OFF/OM/AM) [743] = "%.4f", --PTR-ADDSECPLT-LVR-VOLUM (Jadro 1A, Volume) [741] = "%.4f", --PTR-ADDSECPLT-LVR-PSH (Jadro 1A, Squelch) [742] = "%1d", --PTR-ADDSECPLT-TMB-CONTR (Jadro 1A, Control) ------------------------------------------------------------- -- RI-65 [338] = "%1d", --PTR-LES-TMB-RK85 (RI-65) [292] = "%1d", --PTR-LSPE-BTN-RI65-OFF (RI-65 OFF) [293] = "%1d", --PTR-LSPE-BTN-RI65-RETRY (RI-65 Repeat) [294] = "%1d", --PTR-LSPE-BTN-RI65-TEST (RI-65 Check) [295] = "%1d", --PTR-LSPE-TMB-RI65-AMP (RI-65 Amplifier) ------------------------------------------------------------- -- ARC-UD [456] = "%.1f", --PTR-RPE-LVR-ARKMODE (ARC-UD, Mode OFF/NARROW/WIDE/PULSE/RC) [457] = "%.1f", --PTR-RPE-LVR-ARKMODE2 (ARC-UD, Channel) [453] = "%1d", --PTR-RPE-TMB-ARKSENS (ARC-UD, Sensitivity) [454] = "%1d", --PTR-RPE-TMB-ARKUKV (ARC-UD, MW/DW) [672] = "%1d", --PTR-RPE-BTN-CONTR (ARC-UD, Control) [673] = "%1d", --PTR-RPE-BTN-ANTL (ARC-UD, Ant. Left) [674] = "%1d", --PTR-RPE-BTN-ANTR (ARC-UD, Ant. Right) [455] = "%.4f", --PTR-RPE-LVR-ARKVOL (ARC-UD, Volume) [481] = "%1d", --PTR-RES-TMB-BLOCK (ARC-UD, Lock Switch) ------------------------------------------------------------- -- PKV Sight [589] = "%.4f", --PTR-LAZS-LVR-AIMLGT (Sight Brightness) [855] = "%.4f", --PTR-PKV-ROTARY (Sight Limb) [856] = "%.4f", --PTR-PKV-DOUBLE (Sight Double) {1.0,-1.0} [903] = "%.1f", --PTR-PKV-GLASS-FILTER (PKV Filter) -------------------------------------------------------------------------------- -- CLOCK [57] = "%1d", --PTR-WATCH-LVR-L (Mech clock left lever) [58] = "%1d", --PTR-WATCH-LVR-L (Mech clock left lever) [59] = "%1d", --PTR-WATCH-LVR-R (Mech clock right lever) [60] = "%1d", --PTR-WATCH-LVR-R (Mech clock right lever) [521] = "%1d", --PTR-RSPE-TMB-WRMWTCH (Clock Heating Switch) -------------------------------------------------------------------------------- [839] = "%.1f", --PTR-STAT-PRESS (Static Pressure System Mode (LEFT/COMMON/RIGHT)) -------------------------------------------------------------------------------- -- UV-26 CMD Control Panel [910] = "%1d", --PTR-UV26-ONOFF (CMD Power) [859] = "%1d", --PTR-UV26-BOARD (CMD Select Left/Both/Right board flares dispensers) [913] = "%1d", --PTR-UV26-PROG (CMD Amount flares counter/Programming) [914] = "%1d", --PTR-L45-BTN (CMD Num of sequences) [862] = "%1d", --PTR-L68-BTN (CMD Dispense interval) [863] = "%1d", --PTR-L8-BTN (CMD Num in sequence) [866] = "%1d", --PTR-START-BTN (CMD Start dispense) [911] = "%1d", --PTR-LSPE-BTN-UV26-START (Start/Stop dispense) [864] = "%1d", --PTR-RESET-PROG-BTN (CMD Reset to default program) [865] = "%1d", --PTR-STOP-BTN (CMD Stop dispense) ------------------------------------------------ -- CPTMECH [215] = "%1d", --PTR-BLISTER-LOCK-L (Left blister open/close) [216] = "%1d", --PTR-BLISTER-LOCK-R (Right blister open/close) [881] = "%1d", --PTR-WHEELBRK-ARM (Wheel Brakes) [910] = "%1d", --PTR-RSPE-TMB-WINK002 (Acceleration Reset) [334] = "%1d", --PTR-LES-TMB-VENT (Left Fan Switch) [488] = "%1d", --PTR-RES-TMB-VENT (Right Fan Switch) ------------------------------------------------ -- ARC-9 [469] = "%1d", --PTR-RPE-TMB-NEARFAR (ARC-9, Main/Backup Dialer) [448] = "%.4f", --PTR-RPE-LVR-FRQVOLUME (ARC-9, Volume) [444] = "%1d", --PTR-RPE-TMB-FRQTLG (ARC-9, TLF/TLG) [446] = "%.1f", --PTR-RPE-LVR-FRQMODE (ARC-9, Mode OFF/COMP/ANT/LOOP) [447] = "$.1f", --PTR-RPE-TMB-FRQFRAME (ARC-9, Loop Left/Right) [449] = "%.4f", --PTR-RPE-LVR-FRQADJRES (ARC-9, Backup Frequency Tune) [675] = "%.2f", --PTR-RPE-LVR-FRQRES-SEC (ARC-9, Backup 100kHz rotary) [450] = "%.2f", --PTR-RPE-LVR-FRQRES (ARC-9, Backup 10kHz rotary) [451] = "%.4f", --PTR-RPE-LVR-FRQADJMAIN (ARC-9, Main Frequency Tune) [678] = "%.2f", --PTR-RPE-LVR-FRQMAIN-SEC (ARC-9, Main 100kHz rotary) [452] = "%.2f", --PTR-RPE-LVR-FRQMAIN (ARC-9, Main 10kHz rotary) ------------------------------------------------ -- External Cargo Equipment [199] = "%1d", --PTR-STKSG-CVR-TACTJET (Tactical Cargo Release Button Cover) [200] = "%1d", --PTR-STKSG-BTN-TACTJET (Tactical Cargo Release Button - Push to release) [197] = "%1d", --PTR-STKSG-CVR-EMRGJET (Emergency Cargo Release Button Cover) [198] = "%1d", --PTR-STKSG-BTN-EMRGJET (Emergency Cargo Release Button - Push to release) [324] = "%1d", --PTR-LSPE-TMB-BRK-OUT (External Cargo Automatic Dropping) ------------------------------------------------ -- Signal Flares [282] = "%1d", --PTR-LSPE-TMB-ALRMRKT1 (Signal Flares Cassette 1 Power Switch) [283] = "%1d", --PTR-LSPE-TMB-ALRMRKT2 (Signal Flares Cassette 2 Power Switch) [284] = "%1d", --PTR-LSPE-BTN-RCKT11 (Signal Flares Cassette 1 Launch Red Button) [285] = "%1d", --PTR-LSPE-BTN-RCKT12 (Signal Flares Cassette 1 Launch Green Button) [286] = "%1d", --PTR-LSPE-BTN-RCKT13 (Signal Flares Cassette 1 Launch Yellow Button) [287] = "%1d", --PTR-LSPE-BTN-RCKT14 (Signal Flares Cassette 1 Launch White Button) [288] = "%1d", --PTR-LSPE-BTN-RCKT21 (Signal Flares Cassette 2 Launch Red Button) [289] = "%1d", --PTR-LSPE-BTN-RCKT22 (Signal Flares Cassette 2 Launch Green Button) [290] = "%1d", --PTR-LSPE-BTN-RCKT23 (Signal Flares Cassette 2 Launch Yellow Button) [291] = "%1d", --PTR-LSPE-BTN-RCKT24 (Signal Flares Cassette 2 Launch White Button) ------------------------------------------------ -- SARPP [315] = "%1d", --PTR-LSPE-TMB-CONTR-AUTMAN (SARPP-12 Mode Switch,) ------------------------------------------------ -- Recorder P-503B [305] = "%1d", --PTR-LSPE-TMB-REC (Recorder P-503B Power Switch) [308] = "%.4f", --PTR-LSPE-LVR-LGTSEL (Recorder P-503B Backlight Brightness Knob) ------------------------------------------------ -- IFF [304] = "%1d", --"PTR-LSPE-LVR-MODE (IFF Transponder Mode Selector Switch) [301] = "%1d", --PTR-LSPE-TMB-RADIO-WRK (IFF Transponder Device Selector Switch) [300] = "%1d", --PTR-LSPE-TMB-RADIO-MODE12 (IFF Transponder Device Mode Switch) [296] = "%1d", --PTR-LSPE-CVR-EMRG-ERASE (IFF Transponder Erase Button Cover) [297] = "%1d", --PTR-LSPE-BTN-EMRG-ERASE (IFF Transponder Erase Button) [298] = "%1d", --PTR-LSPE-CVR-EMRG-MAYDAY (IFF Transponder Disaster Switch Cover) [299] = "%1d", --PTR-LSPE-TMB-EMRG-MAYDAY (IFF Transponder Disaster Switch) ------------------------------------------------ -- jump descent siren [323] = "%1d", --PTR-LSPE-TMB-AIR-SIREN (Alarm Bell Button) ------------------------------------------------ [352] = "%1d", --PTR-LPE-TMB-FKP (Gun Camera Switch, ON/OFF) ------------------------------------------------ -- Windshield Wiper [331] = "%.1f", --PTR-LES-TMB-GLSCLN (Left Windscreen Wiper Control Switch, OFF, START, RESET, SPEED 1, SPEED 2) {0.0,0.1,0.2,0.3,0.4} [478] = "%.1f", --PTR-RES-TMB-GLSCLN (Right Windscreen Wiper Control Switch, OFF, START, RESET, SPEED 1, SPEED 2) {0.0,0.1,0.2,0.3,0.4} } ----------------------------- -- HIGH IMPORTANCE EXPORTS -- -- done every export event -- ----------------------------- -- Pointed to by ProcessIkarusDCSHighImportance function ExportScript.ProcessIkarusDCSConfigHighImportance(mainPanelDevice) --[[ every frame export to Ikarus Example from A-10C Get Radio Frequencies get data from device local lUHFRadio = GetDevice(54) ExportScript.Tools.SendData("ExportID", "Format") ExportScript.Tools.SendData(2000, string.format("%7.3f", lUHFRadio:get_frequency()/1000000)) -- <- special function for get frequency data ExportScript.Tools.SendData(2000, ExportScript.Tools.RoundFreqeuncy((UHF_RADIO:get_frequency()/1000000))) -- ExportScript.Tools.RoundFreqeuncy(frequency (MHz|KHz), format ("7.3"), PrefixZeros (false), LeastValue (0.025)) ]] --[12] = "%.4f", -- AGB_3K_Left_pitch {1.0, -1.0} --[91] = "%.4f", -- AGB_3K_Right_pitch {1.0, -1.0} ExportScript.Tools.SendData(12, string.format("%.4f", ExportScript.Tools.negate(mainPanelDevice:get_argument_value(12)))) -- negate ExportScript.Tools.SendData(91, string.format("%.4f", ExportScript.Tools.negate(mainPanelDevice:get_argument_value(91)))) -- negate --[21] = "%.4f", -- VD_10K_L_PRESS {0.0, 1.0} ExportScript.Tools.SendData(21, string.format("%.4f", ExportScript.Tools.negate(mainPanelDevice:get_argument_value(21)))) -- negate ExportScript.CompassReadouts(mainPanelDevice) end function ExportScript.ProcessDACConfigHighImportance(mainPanelDevice) --[[ every frame export to DAC Example from A-10C Get Radio Frequencies get data from device local UHF_RADIO = GetDevice(54) ExportScript.Tools.SendDataDAC("ExportID", "Format") ExportScript.Tools.SendDataDAC("ExportID", "Format", HardwareConfigID) ExportScript.Tools.SendDataDAC("2000", string.format("%7.3f", UHF_RADIO:get_frequency()/1000000)) ExportScript.Tools.SendDataDAC("2000", ExportScript.Tools.RoundFreqeuncy((UHF_RADIO:get_frequency()/1000000))) -- ExportScript.Tools.RoundFreqeuncy(frequency (MHz|KHz), format ("7.3"), PrefixZeros (false), LeastValue (0.025)) ]] end ----------------------------------------------------- -- LOW IMPORTANCE EXPORTS -- -- done every gExportLowTickInterval export events -- ----------------------------------------------------- -- Pointed to by ExportScript.ProcessIkarusDCSConfigLowImportance function ExportScript.ProcessIkarusDCSConfigLowImportance(mainPanelDevice) --[[ export in low tick interval to Ikarus Example from A-10C Get Radio Frequencies get data from device local lUHFRadio = GetDevice(54) ExportScript.Tools.SendData("ExportID", "Format") ExportScript.Tools.SendData(2000, string.format("%7.3f", lUHFRadio:get_frequency()/1000000)) -- <- special function for get frequency data ExportScript.Tools.SendData(2000, ExportScript.Tools.RoundFreqeuncy((UHF_RADIO:get_frequency()/1000000))) -- ExportScript.Tools.RoundFreqeuncy(frequency (MHz|KHz), format ("7.3"), PrefixZeros (false), LeastValue (0.025)) ]] -- Cockpit Light ExportScript.Tools.IkarusCockpitLights(mainPanelDevice, {280, 281, 491, 492, 894, 895, 914}) -- Lh RedLights Brightness Rst gr.1, Lh RedLights Brightness Rst gr.2, Rh RedLights Brightness Rst gr.1, Rh RedLights Brightness Rst gr.2, Central RedLights Brightness Rst gr.1, Central RedLights Brightness Rst gr.2, 5.5V Lights Brightness Rheostat -- deactivated WPADI right warning Flag ExportScript.Tools.SendData(2020, 0) -- UV-26 local lUV26 = ExportScript.Tools.getListIndicatorValue(4) if lUV26 ~= nil and lUV26.txt_digits ~= nil then ExportScript.Tools.SendData(2006, string.format("%s", lUV26.txt_digits)) else ExportScript.Tools.SendData(2006, " ") end --[[ -- AGB_3K_LEFT local lAGB_3K_LEFT = GetDevice(6) ExportScript.Tools.WriteToLog('lAGB_3K_LEFT:get_sideslip '..ExportScript.Tools.dump(lAGB_3K_LEFT:get_sideslip())) ExportScript.Tools.WriteToLog('lAGB_3K_LEFT:get_bank '..ExportScript.Tools.dump(lAGB_3K_LEFT:get_bank())) ExportScript.Tools.WriteToLog('lAGB_3K_LEFT:get_pitch '..ExportScript.Tools.dump(lAGB_3K_LEFT:get_pitch())) -- AGB_3K_RIGHT local lAGB_3K_RIGHT = GetDevice(7) ExportScript.Tools.WriteToLog('lAGB_3K_RIGHT:get_sideslip '..ExportScript.Tools.dump(lAGB_3K_RIGHT:get_sideslip())) ExportScript.Tools.WriteToLog('lAGB_3K_RIGHT:get_bank '..ExportScript.Tools.dump(lAGB_3K_RIGHT:get_bank())) ExportScript.Tools.WriteToLog('lAGB_3K_RIGHT:get_pitch '..ExportScript.Tools.dump(lAGB_3K_RIGHT:get_pitch())) -- DISS_15 local lDISS_15 = GetDevice(15) ExportScript.Tools.WriteToLog('lDISS_15:get_w_vector '..ExportScript.Tools.dump(lDISS_15:get_w_vector())) ExportScript.Tools.WriteToLog('lDISS_15:get_drift_angle '..ExportScript.Tools.dump(lDISS_15:get_drift_angle())) -- RADAR_ALTIMETER local lRADAR_ALTIMETER = GetDevice(18) ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_altitude '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_altitude())) ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_dangerous_height_flag '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_dangerous_height_flag())) ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_distance_limit '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_distance_limit())) ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_dangerous_height '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_dangerous_height())) ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_warning_flag '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_warning_flag())) ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_mode '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_mode())) ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_aperture_size '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_aperture_size())) ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_needle_value '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_needle_value())) -- MISC_SYSTEMS_INTERFACE local lMISC_SYSTEMS_INTERFACE = GetDevice(20) ExportScript.Tools.WriteToLog('lMISC_SYSTEMS_INTERFACE:get_rotor_blades_pitch '..ExportScript.Tools.dump(lMISC_SYSTEMS_INTERFACE:get_rotor_blades_pitch())) ExportScript.Tools.WriteToLog('lMISC_SYSTEMS_INTERFACE:get_main_rotor_rpm '..ExportScript.Tools.dump(lMISC_SYSTEMS_INTERFACE:get_main_rotor_rpm())) -- SPU_7 (Intercom) local lSPU_7 = GetDevice(36) ExportScript.Tools.WriteToLog('lSPU_7:is_communicator_available '..ExportScript.Tools.dump(lSPU_7:is_communicator_available())) ExportScript.Tools.WriteToLog('lSPU_7:get_noise_level '..ExportScript.Tools.dump(lSPU_7:get_noise_level())) ExportScript.Tools.WriteToLog('lSPU_7:get_signal_level '..ExportScript.Tools.dump(lSPU_7:get_signal_level())) --ExportScript.Tools.WriteToLog('lSPU_7:set_communicator '..ExportScript.Tools.dump(lSPU_7:set_communicator())) -- test parameters --ExportScript.Tools.WriteToLog('lSPU_7:set_voip_mode '..ExportScript.Tools.dump(lSPU_7:set_voip_mode())) -- test parameters -- JADRO_1A local lJADRO_1A = GetDevice(37) ExportScript.Tools.WriteToLog('lJADRO_1A:is_on '..ExportScript.Tools.dump(lJADRO_1A:is_on())) ExportScript.Tools.WriteToLog('lJADRO_1A:get_frequency '..ExportScript.Tools.dump(lJADRO_1A:get_frequency())) --ExportScript.Tools.WriteToLog('lJADRO_1A:set_frequency '..ExportScript.Tools.dump(lJADRO_1A:set_frequency())) -- test parameters --ExportScript.Tools.WriteToLog('lJADRO_1A:set_modulation '..ExportScript.Tools.dump(lJADRO_1A:set_modulation())) -- test parameters --ExportScript.Tools.WriteToLog('lJADRO_1A:set_channel '..ExportScript.Tools.dump(lJADRO_1A:set_channel())) -- test parameters -- R_863 local lR_863 = GetDevice(38) ExportScript.Tools.WriteToLog('lR_863:is_on '..ExportScript.Tools.dump(lR_863:is_on())) ExportScript.Tools.WriteToLog('lR_863:get_frequency '..ExportScript.Tools.dump(lR_863:get_frequency())) --ExportScript.Tools.WriteToLog('lR_863:set_frequency '..ExportScript.Tools.dump(lR_863:set_frequency())) -- test parameters --ExportScript.Tools.WriteToLog('lR_863:set_modulation '..ExportScript.Tools.dump(lR_863:set_modulation())) -- test parameters --ExportScript.Tools.WriteToLog('lR_863:set_channel '..ExportScript.Tools.dump(lR_863:set_channel())) -- test parameters -- R_828 local lR_828 = GetDevice(39) ExportScript.Tools.WriteToLog('lR_828:is_on '..ExportScript.Tools.dump(lR_828:is_on())) ExportScript.Tools.WriteToLog('lR_828:get_frequency '..ExportScript.Tools.dump(lR_828:get_frequency())) --ExportScript.Tools.WriteToLog('lR_828:set_frequency '..ExportScript.Tools.dump(lR_828:set_frequency())) -- test parameters --ExportScript.Tools.WriteToLog('lR_828:set_modulation '..ExportScript.Tools.dump(lR_828:set_modulation())) -- test parameters --ExportScript.Tools.WriteToLog('lR_828:set_channel '..ExportScript.Tools.dump(lR_828:set_channel())) -- test parameters ]] end function ExportScript.ProcessDACConfigLowImportance(mainPanelDevice) --[[ export in low tick interval to DAC Example from A-10C Get Radio Frequencies get data from device local UHF_RADIO = GetDevice(54) ExportScript.Tools.SendDataDAC("ExportID", "Format") ExportScript.Tools.SendDataDAC("ExportID", "Format", HardwareConfigID) ExportScript.Tools.SendDataDAC("2000", string.format("%7.3f", UHF_RADIO:get_frequency()/1000000)) ExportScript.Tools.SendDataDAC("2000", ExportScript.Tools.RoundFreqeuncy((UHF_RADIO:get_frequency()/1000000))) -- ExportScript.Tools.RoundFreqeuncy(frequency (MHz|KHz), format ("7.3"), PrefixZeros (false), LeastValue (0.025)) ]] -- Radio comunication -- JADRO 1A local lJADRO_1A = GetDevice(37) if lJADRO_1A:is_on() then --ExportScript.Tools.SendDataDAC("2000", string.format("%7.4f", lJADRO_1A:get_frequency()/1000000)) ExportScript.Tools.SendDataDAC("2000", ExportScript.Tools.RoundFreqeuncy(lJADRO_1A:get_frequency()/1000000, "7.4")) else ExportScript.Tools.SendDataDAC("2000", "-") end -- R_863 (center) local lR_863_c = GetDevice(38) --ExportScript.Tools.SendDataDAC("2001", string.format("%7.3f", lR_863_c:get_frequency()/1000000)) ExportScript.Tools.SendDataDAC("2001", ExportScript.Tools.RoundFreqeuncy(lR_863_c:get_frequency()/1000000)) -- R_863 (left) Channel local lR_863_l = {[0.0]="1",[0.05]="2",[0.10]="3",[0.15]="4",[0.20]="5",[0.25]="6",[0.30]="7",[0.35]="8",[0.40]="9",[0.45]="10",[0.50]="11",[0.55]="12",[0.60]="13",[0.65]="14",[0.70]="15",[0.75]="16",[0.80]="17",[0.85]="18",[0.90]="19",[0.95]="20"} ExportScript.Tools.SendDataDAC("2002", lR_863_l[ExportScript.Tools.round(mainPanelDevice:get_argument_value(370), 2)]) -- R_863 (left) Frequency -- is the same frequency as R_863 (center), but not the frequency from R_863 (left) local lR_863_F = GetDevice(38) --ExportScript.Tools.SendDataDAC("2003", string.format("%7.3f", lR_863_F:get_frequency()/1000000)) ExportScript.Tools.SendDataDAC("2003", ExportScript.Tools.RoundFreqeuncy(lR_863_F:get_frequency()/1000000)) -- R_828 Channel local lR_828 = {[0.0]="1",[0.101]="2",[0.199]="3",[0.302]="4",[0.400]="5",[0.502]="6",[0.601]="7",[0.697]="8",[0.801]="9",[0.898]="10"} ExportScript.Tools.SendDataDAC("2004", lR_828[ExportScript.Tools.round(mainPanelDevice:get_argument_value(736), 3)]) -- R_828 Frequency local lR_828_F = GetDevice(39) if lR_828_F:is_on() then --ExportScript.Tools.SendDataDAC("2005", string.format("%7.3f", lR_828_F:get_frequency()/1000000)) ExportScript.Tools.SendDataDAC("2005", ExportScript.Tools.RoundFreqeuncy(lR_828_F:get_frequency()/1000000)) else ExportScript.Tools.SendDataDAC("2005", "-") end -- UV-26 local lUV26 = ExportScript.Tools.getListIndicatorValue(4) if lUV26 ~= nil and lUV26.txt_digits ~= nil then ExportScript.Tools.SendDataDAC("2006", string.format("%s", lUV26.txt_digits)) else ExportScript.Tools.SendDataDAC("2006", "-") end -- generic Radio display and frequency rotarys ------------------------------------------------- -- genericRadioConf ExportScript.genericRadioConf = {} ExportScript.genericRadioConf['maxRadios'] = 3 -- numbers of aviables/supported radios ExportScript.genericRadioConf[1] = {} -- first radio ExportScript.genericRadioConf[1]['Name'] = "R-863 VHF/UHF" -- name of radio ExportScript.genericRadioConf[1]['DeviceID'] = 38 -- DeviceID for GetDevice from device.lua ExportScript.genericRadioConf[1]['setFrequency'] = true -- change frequency active ExportScript.genericRadioConf[1]['FrequencyMultiplicator'] = 1000000 -- Multiplicator from Hz to MHz ExportScript.genericRadioConf[1]['FrequencyFormat'] = "%7.3f" -- frequency view format LUA style ExportScript.genericRadioConf[1]['FrequencyStep'] = 25 -- minimal step for frequency change ExportScript.genericRadioConf[1]['minFrequency'] = 100.000 -- lowest frequency ExportScript.genericRadioConf[1]['maxFrequency'] = 399.975 -- highest frequency ExportScript.genericRadioConf[1]['Power'] = {} -- power button active ExportScript.genericRadioConf[1]['Power']['ButtonID'] = 3068 -- power button id from cklickable.lua ExportScript.genericRadioConf[1]['Power']['ValueOn'] = 1.0 -- power on value from cklickable.lua ExportScript.genericRadioConf[1]['Power']['ValueOff'] = -1.0 -- power off value from cklickable.lua ExportScript.genericRadioConf[1]['Volume'] = {} -- volume knob active ExportScript.genericRadioConf[1]['Volume']['ButtonID'] = 3005 -- volume button id from cklickable.lua -- ExportScript.genericRadioConf[1]['Preset'] = {} -- preset knob active -- ExportScript.genericRadioConf[1]['Preset']['ArgumentID'] = 161 -- ManualPreset argument id from cklickable.lua -- ExportScript.genericRadioConf[1]['Preset']['ButtonID'] = 3001 -- preset button id from cklickable.lua -- Preset based on switchlogic on clickabledata.lua -- ExportScript.genericRadioConf[1]['Preset']['List'] = {[0.0]="01",[0.05]="02",[0.10]="03",[0.15]="04",[0.20]="05",[0.25]="06",[0.30]="07",[0.35]="08",[0.40]="09",[0.45]="10",[0.50]="11",[0.55]="12",[0.60]="13",[0.65]="14",[0.70]="15",[0.75]="16",[0.80]="17",[0.85]="18",[0.90]="19",[0.95]="20",[1.00]="01"} -- ExportScript.genericRadioConf[1]['Preset']['Step'] = 0.05 -- minimal step for preset change ExportScript.genericRadioConf[1]['Squelch'] = {} -- squelch switch active ExportScript.genericRadioConf[1]['Squelch']['ArgumentID'] = 155 -- ManualPreset argument id from cklickable.lua ExportScript.genericRadioConf[1]['Squelch']['ButtonID'] = 3004 -- squelch button id from cklickable.lua ExportScript.genericRadioConf[1]['Squelch']['ValueOn'] = 1.0 -- squelch on value from cklickable.lua ExportScript.genericRadioConf[1]['Squelch']['ValueOff'] = 0.0 -- squelch off value from cklickable.lua -- ExportScript.genericRadioConf[1]['Load'] = {} -- load button preset -- ExportScript.genericRadioConf[1]['Load']['ButtonID'] = 3015 -- load button id from cklickable.lua -- ManualPreset is AM FM modus switch Manual=AM, Preset=FM -- ExportScript.genericRadioConf[1]['ManualPreset'] = {} -- switch manual or preset active -- ExportScript.genericRadioConf[1]['ManualPreset']['ArgumentID'] = 369 -- ManualPreset argument id from cklickable.lua -- ExportScript.genericRadioConf[1]['ManualPreset']['ButtonID'] = 3001 -- ManualPreset button id from cklickable.lua -- ExportScript.genericRadioConf[1]['ManualPreset']['ValueManual'] = 0.0-- ManualPreset Manual value from cklickable.lua -- ExportScript.genericRadioConf[1]['ManualPreset']['ValuePreset'] = 0.1-- ManualPreset Preset value from cklickable.lua ExportScript.genericRadioConf[2] = {} -- secound radio ExportScript.genericRadioConf[2]['Name'] = "YaDRO-1A HF" -- name of radio ExportScript.genericRadioConf[2]['DeviceID'] = 37 -- DeviceID for GetDevice from device.lua ExportScript.genericRadioConf[2]['setFrequency'] = true -- change frequency active ExportScript.genericRadioConf[2]['FrequencyMultiplicator'] = 1000000 -- Multiplicator from Hz to MHz ExportScript.genericRadioConf[2]['FrequencyFormat'] = "%7.4f" -- frequency view format LUA style ExportScript.genericRadioConf[2]['FrequencyStep'] = 1 -- minimal step for frequency change ExportScript.genericRadioConf[2]['minFrequency'] = 2.000 -- lowest frequency ExportScript.genericRadioConf[2]['maxFrequency'] = 17.999 -- highest frequency ExportScript.genericRadioConf[2]['Power'] = {} -- power button active ExportScript.genericRadioConf[2]['Power']['ButtonID'] = 3013 -- power button id from cklickable.lua ExportScript.genericRadioConf[2]['Power']['ValueOn'] = 0.1 -- power on value from cklickable.lua ExportScript.genericRadioConf[2]['Power']['ValueOff'] = 0.0 -- power off value from cklickable.lua ExportScript.genericRadioConf[2]['Volume'] = {} -- volume knob active ExportScript.genericRadioConf[2]['Volume']['ButtonID'] = 3007 -- volume button id from cklickable.lua -- ExportScript.genericRadioConf[2]['Preset'] = {} -- preset knob active -- ExportScript.genericRadioConf[2]['Preset']['ArgumentID'] = 137 -- ManualPreset argument id from cklickable.lua -- ExportScript.genericRadioConf[2]['Preset']['ButtonID'] = 3001 -- preset button id from cklickable.lua -- Preset based on switchlogic on clickabledata.lua -- ExportScript.genericRadioConf[2]['Preset']['List'] = {[0.0]="01",[0.01]="02",[0.02]="03",[0.03]="04",[0.04]="05",[0.05]="06",[0.06]="07",[0.07]="08",[0.08]="09",[0.09]="10",[0.10]="11",[0.11]="12",[0.12]="13",[0.13]="14",[0.14]="15",[0.15]="16",[0.16]="17",[0.17]="18",[0.18]="19",[0.19]="20",[0.20]="01"} -- ExportScript.genericRadioConf[2]['Preset']['Step'] = 0.01 -- minimal step for preset change ExportScript.genericRadioConf[2]['Squelch'] = {} -- squelch switch active ExportScript.genericRadioConf[2]['Squelch']['ArgumentID'] = 743 -- ManualPreset argument id from cklickable.lua ExportScript.genericRadioConf[2]['Squelch']['ButtonID'] = 3008 -- squelch button id from cklickable.lua ExportScript.genericRadioConf[2]['Squelch']['ValueOn'] = 0.7 -- squelch on value from cklickable.lua ExportScript.genericRadioConf[2]['Squelch']['ValueOff'] = 0.0 -- squelch off value from cklickable.lua -- Load is autotune lamp on Mi-8 ExportScript.genericRadioConf[2]['Load'] = {} -- load button preset ExportScript.genericRadioConf[2]['Load']['ButtonID'] = nil -- load button id from cklickable.lua, Load button deactiviert ExportScript.genericRadioConf[2]['Load']['ArgumentID'] = 849 -- load argument id for autotune lamp on Mi-8 -- ManualPreset button change between SSB (Single SideBand) and AM, Manual=SSB, AM=Preset ExportScript.genericRadioConf[2]['ManualPreset'] = {} -- switch manual or preset active ExportScript.genericRadioConf[2]['ManualPreset']['ArgumentID'] = 744 -- ManualPreset argument id from cklickable.lua ExportScript.genericRadioConf[2]['ManualPreset']['ButtonID'] = 3001 -- ManualPreset button id from cklickable.lua ExportScript.genericRadioConf[2]['ManualPreset']['ValueManual'] = 0.5-- ManualPreset Manual value from cklickable.lua ExportScript.genericRadioConf[2]['ManualPreset']['ValuePreset'] = 1.0-- ManualPreset Preset value from cklickable.lua ExportScript.genericRadioConf[3] = {} -- secound radio ExportScript.genericRadioConf[3]['Name'] = " R-828 LVHF FM" -- name of radio ExportScript.genericRadioConf[3]['DeviceID'] = 39 -- DeviceID for GetDevice from device.lua ExportScript.genericRadioConf[3]['setFrequency'] = false -- change frequency active ExportScript.genericRadioConf[3]['FrequencyMultiplicator'] = 1000000 -- Multiplicator from Hz to MHz ExportScript.genericRadioConf[3]['FrequencyFormat'] = "%7.3f" -- frequency view format LUA style ExportScript.genericRadioConf[3]['FrequencyStep'] = 25 -- minimal step for frequency change ExportScript.genericRadioConf[3]['minFrequency'] = 20.000 -- lowest frequency ExportScript.genericRadioConf[3]['maxFrequency'] = 59.975 -- highest frequency ExportScript.genericRadioConf[3]['Power'] = {} -- power button active ExportScript.genericRadioConf[3]['Power']['ButtonID'] = 3005 -- power button id from cklickable.lua ExportScript.genericRadioConf[3]['Power']['ValueOn'] = 1.0 -- power on value from cklickable.lua ExportScript.genericRadioConf[3]['Power']['ValueOff'] = 0.0 -- power off value from cklickable.lua ExportScript.genericRadioConf[3]['Volume'] = {} -- volume knob active ExportScript.genericRadioConf[3]['Volume']['ButtonID'] = 3002 -- volume button id from cklickable.lua ExportScript.genericRadioConf[3]['Preset'] = {} -- preset knob active ExportScript.genericRadioConf[3]['Preset']['ArgumentID'] = 735 -- ManualPreset argument id from cklickable.lua ExportScript.genericRadioConf[3]['Preset']['ButtonID'] = 3001 -- preset button id from cklickable.lua -- ExportScript.genericRadioConf[3]['Preset']['ButtonID2'] = 3002 -- preset button id from cklickable.lua -- Preset based on switchlogic on clickabledata.lua ExportScript.genericRadioConf[3]['Preset']['List'] = {[0.0]="1",[0.1]="2",[0.2]="3",[0.3]="4",[0.4]="5",[0.5]="6",[0.6]="7",[0.7]="8",[0.8]="9",[0.9]="10"} ExportScript.genericRadioConf[3]['Preset']['Step'] = 0.1 -- minimal step for preset change -- ExportScript.genericRadioConf[3]['Preset']['Step2'] = -0.1 -- minimal step for preset change ExportScript.genericRadioConf[3]['Squelch'] = {} -- squelch switch active ExportScript.genericRadioConf[3]['Squelch']['ArgumentID'] = 739 -- ManualPreset argument id from cklickable.lua ExportScript.genericRadioConf[3]['Squelch']['ButtonID'] = 3004 -- squelch button id from cklickable.lua ExportScript.genericRadioConf[3]['Squelch']['ValueOn'] = 0.0 -- squelch on value from cklickable.lua ExportScript.genericRadioConf[3]['Squelch']['ValueOff'] = -1.0 -- squelch off value from cklickable.lua ExportScript.genericRadioConf[3]['Load'] = {} -- load button preset ExportScript.genericRadioConf[3]['Load']['ButtonID'] = 3003 -- load button id from cklickable.lua ExportScript.genericRadioConf[3]['Load']['ArgumentID'] = 740 -- load argument id for autotune lamp on Mi-8 -- ManualPreset change betwen VOICE and HOMING Mode, Manual=Voice, Preset=Homing ExportScript.genericRadioConf[3]['ManualPreset'] = {} -- switch manual or preset active ExportScript.genericRadioConf[3]['ManualPreset']['ArgumentID'] = 757 -- ManualPreset argument id from cklickable.lua ExportScript.genericRadioConf[3]['ManualPreset']['ButtonID'] = 3006 -- ManualPreset button id from cklickable.lua ExportScript.genericRadioConf[3]['ManualPreset']['ValueManual'] = 1.0-- ManualPreset Manual value from cklickable.lua ExportScript.genericRadioConf[3]['ManualPreset']['ValuePreset'] = 0.0-- ManualPreset Preset value from cklickable.lua ExportScript.genericRadio(nil, nil) --============================================================================================ --[[ ExportScript.Tools.WriteToLog('list_cockpit_params(): '..ExportScript.Tools.dump(list_cockpit_params())) ExportScript.Tools.WriteToLog('CMSP: '..ExportScript.Tools.dump(list_indication(7))) -- list_indication get tehe value of cockpit displays local ltmp1 = 0 for ltmp2 = 0, 20, 1 do ltmp1 = list_indication(ltmp2) ExportScript.Tools.WriteToLog(ltmp2..': '..ExportScript.Tools.dump(ltmp1)) end ]] --[[ -- getmetatable get function name from devices local ltmp1 = 0 for ltmp2 = 1, 70, 1 do ltmp1 = GetDevice(ltmp2) ExportScript.Tools.WriteToLog(ltmp2..': '..ExportScript.Tools.dump(ltmp1)) ExportScript.Tools.WriteToLog(ltmp2..' (metatable): '..ExportScript.Tools.dump(getmetatable(ltmp1))) end ]] end function ExportScript.CompassReadouts(mainPanelDevice) --[[ [25] = "%.4f", -- UGR_4K_heading_L {0.0, 1.0} [27] = "%.4f", -- UGR_4K_commanded_course_L {0.0, 1.0} [28] = "%.4f", -- UGR_4K_bearing_needle_L {0.0, 1.0} ---- [101] = "%.4f", -- UGR_4K_heading_R {0.0, 1.0} [103] = "%.4f", -- UGR_4K_commanded_course_R {0.0, 1.0} [104] = "%.4f", -- UGR_4K_bearing_needle_R {0.0, 1.0} ]] --ExportScript.Tools.SendData(3000, "Hi") --test local pilotCompassHeadingValue = ExportScript.Tools.round(mainPanelDevice:get_argument_value(25),8)--rounds to the 8th digit after the decimal local pilotCompassCommandedCourseValue = ExportScript.Tools.round(mainPanelDevice:get_argument_value(27),8)--makes it more accurate compared to 2 local pilotCompassBearingNeedleValue = ExportScript.Tools.round(mainPanelDevice:get_argument_value(28),8) --[[ we know for the HeadingValue, 0.0 = 000 0.5 = 180 1.0 = 000 For both the commanded course and the bearing needle are similar, but they are based on the orentation of the Heading value. This means that if we subtract their values from the Heading value, the absolute value should represent the fraction of the compass that is shown. Hopefully... Examples: if pilotCompassHeadingValue = 0.0, the top is indicating 000 pilotCompassCommandedCourseValue at 0.0 will show 000 pilotCompassBearingNeedleValue at 0.0 will show 000 We realize that we only need to solve for CommandedCourse bc the bearingNeedle will be the same code. if pilotCompassHeadingValue = 0.25, the top is indicating 090 if pilotCompassCommandedCourseValue at 0.0 will point to 090 if pilotCompassCommandedCourseValue at 0.25 will point to 180 Now let's make up some math that works. Science! We know that 180 should "be" 0.50. That turns out to be the vaules combined... Let's see if that works in a different example. if pilotCompassHeadingValue = 0.75, the top is indicating 270 if pilotCompassCommandedCourseValue at 0.0 will point to 270 if pilotCompassCommandedCourseValue at 0.50 will point to 090 Does it work? Well, 0.75 plus 0.50 = 1.25, which reduced by 1 = 0.25, which represents a compass value of 090. Yes! The logic works! All of the above was assumed and varified via ModelViewer. Now lets write that in code. ]] -- Let's print out some easy, basic, raw values to monitor our base assumptions -- This step is import so that we don't go in a random direction with our code. -- Dont use the ':' symbol. Export Scripts does not like that. --[[ ExportScript.Tools.SendData(3000, "HDG\n" .. "Raw " .. pilotCompassHeadingValue .. "\n" .. "DEG " .. pilotCompassHeadingValue*360) ExportScript.Tools.SendData(3001, "Needle 2\n" .. "Raw " .. pilotCompassCommandedCourseValue .. "\n" .. "Abs " .. pilotCompassCommandedCourseValue*360) ExportScript.Tools.SendData(3002, "Needle 1\n" .. "Raw " .. pilotCompassBearingNeedleValue .. "\n" .. "Abs " .. pilotCompassBearingNeedleValue*360) ]] -- Now we code the code we think is going to work using out thought process from above. local pilotadditiveCommandedValue = pilotCompassHeadingValue + pilotCompassCommandedCourseValue local pilotCompassCommandedNeedleValue_adjusted -- We have to reduce the number to below 1 (or below 360 if we did it later). if pilotadditiveCommandedValue > 1 then pilotCompassCommandedNeedleValue_adjusted = pilotadditiveCommandedValue - 1 -- The max the additive can be is "2". if we minus 1 from 2, we get 1, which is 360. -- Not more reduction logic is necessary. else pilotCompassCommandedNeedleValue_adjusted = pilotadditiveCommandedValue end -- we need to add a '0' to the front for numbers less than three digits long -- or add two '0's for number less than two digits long -- The following code is from the mossie.lua --turn the number into a string pilotCompassCommandedNeedleValue_adjusted = string.format("%.1d" , round(pilotCompassCommandedNeedleValue_adjusted*360,0)) --if the values string length is 2 then if #pilotCompassCommandedNeedleValue_adjusted == 2 then pilotCompassCommandedNeedleValue_adjusted = "0" .. pilotCompassCommandedNeedleValue_adjusted elseif #pilotCompassCommandedNeedleValue_adjusted == 1 then pilotCompassCommandedNeedleValue_adjusted = "00" .. pilotCompassCommandedNeedleValue_adjusted end --[[ ExportScript.Tools.SendData(3003, "Needle 2\n" .. "Deg " .. pilotCompassCommandedNeedleValue_adjusted) ExportScript.Tools.SendData(3004, "Additive\n" .. pilotadditiveCommandedValue .. "=\n" .. pilotCompassHeadingValue .. "+\n" .. pilotCompassCommandedCourseValue) ]] -- Yay, it works! Now we need to format into solid degrees and round the result -- After that we will clean the code up a bit and then replicate for the other needle. local pilotadditiveBearingValue = pilotCompassHeadingValue + pilotCompassBearingNeedleValue local pilotCompassBearingNeedleValue_adjusted -- We have to reduce the number to below 1 (or below 360 if we did it later). if pilotadditiveBearingValue > 1 then pilotCompassBearingNeedleValue_adjusted = pilotadditiveBearingValue - 1 -- The max the additive can be is "2". if we minus 1 from 2, we get 1, which is 360. -- Not more reduction logic is necessary. else pilotCompassBearingNeedleValue_adjusted = pilotadditiveBearingValue end -- we need to add a '0' to the front for numbers less than three digits long -- or add two '0's for number less than two digits long -- The following code is from the mossie.lua --turn the number into a string pilotCompassBearingNeedleValue_adjusted = string.format("%.1d" , round(pilotCompassBearingNeedleValue_adjusted*360,0)) --if the values string length is 2 then if #pilotCompassBearingNeedleValue_adjusted == 2 then pilotCompassBearingNeedleValue_adjusted = "0" .. pilotCompassBearingNeedleValue_adjusted elseif #pilotCompassBearingNeedleValue_adjusted == 1 then pilotCompassBearingNeedleValue_adjusted = "00" .. pilotCompassBearingNeedleValue_adjusted end --[[ ExportScript.Tools.SendData(3005, "Needle 1\n" .. "Deg " .. pilotCompassBearingNeedleValue_adjusted) ]] -- Now that we have all of that information, it's time to put in onto one tile. --turn the number into a string pilotCompassHeadingValue = string.format("%.1d" , round(pilotCompassHeadingValue*360,0)) --if the values string length is 2 then if #pilotCompassHeadingValue == 2 then pilotCompassHeadingValue = "0" .. pilotCompassHeadingValue elseif #pilotCompassHeadingValue == 1 then pilotCompassHeadingValue = "00" .. pilotCompassHeadingValue end --last minute string adjustment for this aircraft's compass if pilotCompassHeadingValue == "360" then pilotCompassHeadingValue = "000" end if pilotCompassCommandedNeedleValue_adjusted == "360" then pilotCompassCommandedNeedleValue_adjusted = "000" end if pilotCompassBearingNeedleValue_adjusted == "360" then pilotCompassBearingNeedleValue_adjusted = "000" end ExportScript.Tools.SendData(3000, "PLT\n" .. "HDG " .. pilotCompassHeadingValue .. "\nN1 " .. pilotCompassCommandedNeedleValue_adjusted .. "\nN2 " .. pilotCompassBearingNeedleValue_adjusted) --=====Copilot Side=====-- local copilotCompassHeadingValue = ExportScript.Tools.round(mainPanelDevice:get_argument_value(101),2) local copilotCompassCommandedCourseValue = ExportScript.Tools.round(mainPanelDevice:get_argument_value(103),2) local copilotCompassBearingNeedleValue = ExportScript.Tools.round(mainPanelDevice:get_argument_value(104),2) local copilotadditiveCommandedValue = copilotCompassHeadingValue + copilotCompassCommandedCourseValue local copilotCompassCommandedNeedleValue_adjusted if copilotadditiveCommandedValue > 1 then copilotCompassCommandedNeedleValue_adjusted = copilotadditiveCommandedValue - 1 else copilotCompassCommandedNeedleValue_adjusted = copilotadditiveCommandedValue end local copilotCompassCommandedNeedleValue_adjustedInt = round(copilotCompassCommandedNeedleValue_adjusted*360,0) --used for later copilotCompassCommandedNeedleValue_adjusted = string.format("%.1d" , round(copilotCompassCommandedNeedleValue_adjusted*360,0)) --if the values string length is 2 then if #copilotCompassCommandedNeedleValue_adjusted == 2 then copilotCompassCommandedNeedleValue_adjusted = "0" .. copilotCompassCommandedNeedleValue_adjusted elseif #copilotCompassCommandedNeedleValue_adjusted == 1 then copilotCompassCommandedNeedleValue_adjusted = "00" .. copilotCompassCommandedNeedleValue_adjusted end local copilotadditiveBearingValue = copilotCompassHeadingValue + copilotCompassBearingNeedleValue local copilotCompassBearingNeedleValue_adjusted if copilotadditiveBearingValue > 1 then copilotCompassBearingNeedleValue_adjusted = copilotadditiveBearingValue - 1 else copilotCompassBearingNeedleValue_adjusted = copilotadditiveBearingValue end copilotCompassBearingNeedleValue_adjustedInt = round(copilotCompassBearingNeedleValue_adjusted*360,0)--used for later --turn the number into a string copilotCompassBearingNeedleValue_adjusted = string.format("%.1d" , round(copilotCompassBearingNeedleValue_adjusted*360,0)) --if the values string length is 2 then if #copilotCompassBearingNeedleValue_adjusted == 2 then copilotCompassBearingNeedleValue_adjusted = "0" .. copilotCompassBearingNeedleValue_adjusted elseif #copilotCompassBearingNeedleValue_adjusted == 1 then copilotCompassBearingNeedleValue_adjusted = "00" .. copilotCompassBearingNeedleValue_adjusted end -- Now that we have all of that information, it's time to put in onto one tile. --turn the number into a string copilotCompassHeadingValue = string.format("%.1d" , round(copilotCompassHeadingValue*360,0)) --if the values string length is 2 then if #copilotCompassHeadingValue == 2 then copilotCompassHeadingValue = "0" .. copilotCompassHeadingValue elseif #copilotCompassHeadingValue == 1 then copilotCompassHeadingValue = "00" .. copilotCompassHeadingValue end --last minute string adjustment for this aircraft's compass if copilotCompassHeadingValue == "360" then copilotCompassHeadingValue = "000" end if copilotCompassCommandedNeedleValue_adjusted == "360" then copilotCompassCommandedNeedleValue_adjusted = "000" end if copilotCompassBearingNeedleValue_adjusted == "360" then copilotCompassBearingNeedleValue_adjusted = "000" end ExportScript.Tools.SendData(3001, "CPLT\n" .. "HDG " .. copilotCompassHeadingValue .. "\nN1 " .. copilotCompassCommandedNeedleValue_adjusted .. "\nN2 " .. copilotCompassBearingNeedleValue_adjusted) -- something a little extra. an "on course" or "on bearing" detector that changes colors -- if the commanded course is within 5 degrees of the way you are going, then you are on course -- if the ndb bearing line is within 5 degrees of the way you are going, then you are on bearing -- You can code this some other day. end ------------------------------ -- General Helper Functions -- ------------------------------ function ExportScript.Linearize(current_value, raw_tab, final_tab) -- (c) scoobie if current_value <= raw_tab[1] then return final_tab[1] end for index, value in pairs(raw_tab) do if current_value <= value then local ft = final_tab[index] local rt = raw_tab[index] return (current_value - rt) * (ft - final_tab[index - 1]) / (rt - raw_tab[index - 1]) + ft end end -- we shouldn't be here, so something went wrong - return arbitrary max. final value, maybe the user will notice the problem: return final_tab[#final_tab] end function round(num, numDecimalPlaces) --http://lua-users.org/wiki/SimpleRound local mult = 10^(numDecimalPlaces or 0) return math.floor(num * mult + 0.5) / mult end function format_int(number) --https://stackoverflow.com/questions/10989788/format-integer-in-lua local i, j, minus, int, fraction = tostring(number):find('([-]?)(%d+)([.]?%d*)') -- reverse the int-string and append a comma to all blocks of 3 digits int = int:reverse():gsub("(%d%d%d)", "%1,") -- reverse the int-string back remove an optional comma and put the -- optional minus and fractional part back return minus .. int:reverse():gsub("^,", "") .. fraction end function trim(s) --http://lua-users.org/wiki/CommonFunctions -- from PiL2 20.4 return (s:gsub("^%s*(.-)%s*$", "%1")) end