mirror of
https://github.com/weyne85/DCS-ExportScripts.git
synced 2025-10-29 16:58:18 +00:00
9c007dd9c4
change A-10C add ID 717 for Standby Attitude Indicator knob arrow add ID 22 for ADI Pitch Trim Knob add ID 45 for HSI Heading Set Knob add ID 44 for HSI Course Set Knob add ID 67 for SAI Cage Standby Attitude Indicator. Hold Right Mouse Button and rotate Scroll Wheel to uncage add ID 66 for SAI Cage Standby Attitude Indicator. Hold Right Mouse Button and rotate Scroll Wheel to uncage add ID 68 for Clock Toggle Clock and Elapsed Time Modes add ID 69 for Clock Start, Stop and Reset Elapsed Timer change ID 127 to 128 for PTR-THROTTLE-FRICTION (Throttle Friction Control) add ID 652 for PTR-TEMS-DATA (TEMS DATA) add ID 773 for PTR-FLAPS (Flap Setting) add ID 709 for PTR-ARMGS-COVER (Arm Ground Safety Override Cover) add ID 710 for PTR-ARMGS-OVERRIDE-SWITCH (Arm Ground Safety Override Switch) add ID 666 for PTR-CBP-AILERON-DISC-L (AILERON DISC L) add ID 667 for PTR-CBP-AILERON-DISC-R (AILERON DISC R) add ID 668 for PTR-CBP-SPS-RUDDER-AUTH-LIM (SPS & RUDDER AUTH LIMIT) add ID 669 for PTR-CBP-ELEVATION-DISC-L (ELEVATION DISC L) add ID 670 for PTR-CBP-ELEVATION-DISC-R (ELEVATION DISC R) add ID 671 for PTR-CBP-AILERON-TAB-L (AILERON TAB L) add ID 672 for PTR-CBP-AILERON-TAB-R (AILERON TAB R) add ID 673 for PTR-CBP-EMER-FLAP (EMER FLAP) add ID 674 for PTR-CBP-EMER-TRIM (EMER TRIM) add ID 675 for PTR-CBP-LAND-GEAR (LAND GEAR) add ID 676 for PTR-CBP-ENGINE-START-L (ENGINE START L) add ID 677 for PTR-CBP-ENGINE-START-R (ENGINE START R) add ID 678 for PTR-CBP-APU-CONT (APU CONT) add ID 679 for PTR-CBP-ANG-IGNITOR-1 (ENG IGNITOR L/R-1) add ID 680 for PTR-CBP-ANG-IGNITOR-2 (ENG IGNITOR L/R-2) add ID 681 for PTR-CBP-EMER-FUEL-SHUTOFF-ENG-L (EMER FUEL SHUTOFF ENG L) add ID 682 for PTR-CBP-EMER-FUEL-SHUTOFF-ENG-R (EMER FUEL SHUTOFF ENG R) add ID 683 for PTR-CBP-DC-FUEL-PUMP (DC FUEL PUMP) add ID 684 for PTR-CBP-BLEED-AIR-CONT-L (BLEED AIR CONT L) add ID 685 for PTR-CBP-BLEED-AIR-CONT-R (BLEED AIR CONT R) add ID 686 for PTR-CBP-EXT-STORES-JETT-1 (EXT STORES JETT 1) add ID 687 for PTR-CBP-EXT-STORES-JETT-2 (EXT STORES JETT 2) add ID 688 for PTR-CBP-STBY-ATT-IND (STBY ATT IND) add ID 689 for PTR-CBP-MASTER-CAUT (MASTER CAUT) add ID 690 for PTR-CBP-PITOT-HEAT-AC (PITOT HEAT AC) add ID 691 for PTR-CBP-IFF (IFF) add ID 692 for PTR-CBP-UHF-COMM (UHF COMM) add ID 693 for PTR-CBP-INTER-COMM (INTER COMM) add ID 694 for PTR-CBP-GENERATOR-CONT-L (GENERATOR CONT L) add ID 695 for PTR-CBP-GENERATOR-CONT-R (GENERATOR CONT R) add ID 696 for PTR-CBP-CONVERTER-L (CONVERTER L) add ID 697 for PTR-CBP-AUX-ESS-BUS-0A (AUX ESS BUS 0A) add ID 698 for PTR-CBP-AUX-ESS-BUS-0B (AUX ESS BUS 0B) add ID 699 for PTR-CBP-AUX-ESS-BUS-0C (AUX ESS BUS 0C) add ID 700 for PTR-CBP-BATTERY-BUS-TRANS (BATTERY BUS TRANS) add ID 701 for PTR-CBP-INVERTER-PWR (INVERTER PWR) add ID 702 for PTR-CBP-INVERTER-CONT (INVERTER CONT) add ID 703 for PTR-CBP-AUX-ESS-BUS-TIE (AUX ESS BUS TIE) add ID 62 for PNT-ALT-LEVR-L (Set Pressure) add ID 60 for PNT-ALT-LEVR-R (ELECT/PNEU) add ID 770 for Seat Height Adjustment up/down add ID 787 for Extend boarding ladder cover add ID 788 for Extend boarding ladder button add ID 904 for Accelerometer Push to set add ID 789 for DVADR - Function control toggle switch add ID 776 for Anti-G suit valve test button add ID 777 for Internal canopy actuator disengage lever add ID 785 for Canopy jettison lever add ID 786 for Canopy Jettison Lever Unlock Button add ID 706 for IFF - antenna switch add ID 707 for UHF - antenna switch add ID 708 for EGI HQ TOD add ID 16 for RWR Adjust Display Brightness change AJS37 add ID 131 for Minute add ID 133 for Second (Arrow) add ID 1333 for Second add ID 135 for Clock Setting change AV8BNA add ID 350 for Backup ADI Cage change F-5E-3 format value for Radio with ID 327, 328, 329, 330 and 331 format value for TACAN XY Wheel ID 266 format value for set air speed knob ID 177 change FA-18C_hornet add ID 439 for FLIR Switch, ON/STBY/OFF add id 441 for LTD/R Switch, ARM/SAFE/AFT change Ka-50 add ID 573 for VM_15PV_BALT_tenths change M-2000C format value for ADI standby ID 328 format value for Rada altimeter mimimum knob ID 192 change UHF Radio Preset Chanel values change Mi-8MT format value for VD 10K L Press ID 21 change SA342L/SA342;/SA342Mistral change clock (minute) values for ID 42 change clock (second) values for ID 43 add ID 210 for clock ExtCouronne formate value Radar Alt lamp for ID 97
733 lines
43 KiB
Lua
733 lines
43 KiB
Lua
-- SA342M
|
||
|
||
ExportScript.FoundDCSModule = true
|
||
ExportScript.Version.SA342M = "1.2.1"
|
||
|
||
ExportScript.ConfigEveryFrameArguments =
|
||
{
|
||
--[[
|
||
every frames arguments
|
||
based of "mainpanel_init.lua"
|
||
Example (http://www.lua.org/manual/5.1/manual.html#pdf-string.format)
|
||
[DeviceID] = "Format"
|
||
[4] = "%.4f", <- floating-point number with 4 digits after point
|
||
[19] = "%0.1f", <- floating-point number with 1 digit after point
|
||
[129] = "%1d", <- decimal number
|
||
[5] = "%.f", <- floating point number rounded to a decimal number
|
||
]]
|
||
-- Gyro Panel
|
||
[200] = "%.4f", -- Gyro_Needle_State {-1,1} Gyro Panel SYNC
|
||
[201] = "%.f", -- Gyro_voyant_test Lamp {0,1}
|
||
[202] = "%.f", -- Gyro_voyant_trim Lamp {0,1}
|
||
[203] = "%.f", -- Gyro_voyant_bpp Lamp {0,1}
|
||
-- Autopilot Panel
|
||
[37] = "%.4f", -- T_Needle_State {-1,1} Pitch correction Indicator
|
||
[38] = "%.4f", -- R_Needle_State {-1,1} Roll correction Indicator
|
||
[39] = "%.4f", -- L_Needle_State {-1,1} Yaw correction Indicator
|
||
--[196] = "%.4f", -- RWR_light {0,1} -- RWR background light
|
||
--[] = "%.4f", -- PE_fondbright {0,1} ???
|
||
--[353] = "%.4f", -- NADIR_fondbright {0,1} ???
|
||
-- Flare Dispenser Lamps
|
||
[233] = "%.f", -- Voyant_FD_On {0,1} Power On
|
||
[231] = "%.f", -- Voyant_FD_G {0,1} select Left
|
||
[232] = "%.f", -- Voyant_FD_D {0,1} select Right
|
||
[227] = "%.f", -- Voyant_FD_LEU {0,1} Status LEU
|
||
[223] = "%.f", -- Voyant_FD_G_vide1 {0,1} Status Left G
|
||
[224] = "%.f", -- Voyant_FD_G_vide2 {0,1} Status Left VIDE
|
||
[225] = "%.f", -- Voyant_FD_D_vide1 {0,1} Status Right G
|
||
[226] = "%.f", -- Voyant_FD_D_vide2 {0,1} Status Right VIDE
|
||
-- ADF Radio
|
||
[158] = "%0.1f", -- ADF_nav1_centaine {0,1} X00.0 khz {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
[159] = "%0.1f", -- ADF_nav1_dizaine {0,1} 0X0.0 khz {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
[160] = "%0.1f", -- ADF_nav1_unite {0,1} 00X.0 khz {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
[161] = "%0.1f", -- ADF_nav1_dec {0,1} 000.X khz {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
[162] = "%0.1f", -- ADF_nav2_centaine {0,1} X00.0 khz {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
[163] = "%0.1f", -- ADF_nav2_dizaine {0,1} 0X0.0 khz {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
[164] = "%0.1f", -- ADF_nav2_unite {0,1} 00X.0 khz {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
[165] = "%0.1f", -- ADF_nav2_dec {0,1} 000.X khz {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
-- ADF Gauge
|
||
[113] = "%.4f", -- ADF_Fond Compass rose {0,10,20,30,40,50,60,70,80,90,100,110,120,130,140,150,160,170,180,190,200,210,220,230,240,250,260,270,280,290,300,310,320,330,340,350,360}{0.0,0.028,0.055,0.084,0.111,0.138,0.166,0.194,0.222,0.249,0.2775,0.305,0.332,0.36,0.388,0.415,0.4434,0.47,0.498,0.526,0.555,0.583,0.611,0.638,0.6665,0.694,0.722,0.75,0.776,0.805,0.833,0.861,0.8885,0.917,0.944,0.972,1.0}
|
||
[102] = "%.4f", -- ADF_Aiguille_large Heading Needle large {-360.0,0.0,360.0}{-1.0,0.0,1.0}
|
||
[103] = "%.4f", -- ADF_Aiguille_fine Heading Needle fine {-360.0,0.0,360.0}{-1.0,0.0,1.0}
|
||
[107] = "%.1f", -- ADF_FlagCAP {0,1}
|
||
[109] = "%.1f", -- ADF_FlagBut {0,1}
|
||
[108] = "%.1f", -- ADF_FlagCompteur PX Flag {0,1}
|
||
[110] = "%0.1f", -- ADF_compteur_Cent {0,1} X00 {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
[111] = "%0.1f", -- ADF_compteur_Dix {0,1} 0X0 {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
[112] = "%0.1f", -- ADF_compteur_Unit {0,1} 00X {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
-- CLOCK
|
||
[41] = "%.3f", -- CLOCK_HOUR {0,1,2,3,4,5,6,7,8,9,10,11,12}{0,0.081,0.162,0.245,0.33,0.415,0.501,0.587,0.672,0.756,0.838,0.919,1}
|
||
[42] = "%.3f", -- CLOCK_SECOND {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60}{0,0.017,0.033,0.049,0.065,0.08,0.098,0.115,0.131,0.147,0.163,0.18,0.195,0.213,0.23,0.246,0.262,0.279,0.296,0.313,0.33,0.346,0.363,0.38,0.397,0.415,0.431,0.449,0.466,0.483,0.501,0.518,0.535,0.552,0.569,0.586,0.604,0.621,0.638,0.655,0.672,0.688,0.705,0.722,0.739,0.755,0.771,0.788,0.804,0.821,0.838,0.853,0.87,0.885,0.902,0.919,0.934,0.95,0.967,0.984,1}
|
||
[43] = "%.3f", -- CLOCK_MINUTE {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60}{0,0.017,0.033,0.049,0.065,0.08,0.098,0.115,0.131,0.147,0.163,0.18,0.195,0.213,0.23,0.246,0.262,0.279,0.296,0.313,0.33,0.346,0.363,0.38,0.397,0.415,0.431,0.449,0.466,0.483,0.501,0.518,0.535,0.552,0.569,0.586,0.604,0.621,0.638,0.655,0.672,0.688,0.705,0.722,0.739,0.755,0.771,0.788,0.804,0.821,0.838,0.853,0.87,0.885,0.902,0.919,0.934,0.95,0.967,0.984,1}
|
||
[44] = "%.3f", -- CLOCK_MINI {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30}{0,0.032,0.065,0.098,0.131,0.164,0.198,0.231,0.264,0.297,0.331,0.364,0.397,0.43,0.464,0.497,0.523,0.551,0.576,0.605,0.63,0.659,0.684,0.714,0.758,0.796,0.838,0.879,0.92,0.958,1}
|
||
[210] = "%.4f", -- Clock_ExtCouronne
|
||
-- Wipers
|
||
--[547] = "%.4f", -- EGPilote {-1,1}
|
||
--[546] = "%.4f", -- EGCopilote {-1,1}
|
||
-- LIGHTS
|
||
--[40] = "%.4f", -- Lum_Plafond {0,1} Main Panel Lights
|
||
--[142] = "%.4f", -- PBOIntensity {0,1} Main Panel Background lights
|
||
--[144] = "%.4f", -- PUPIntensity {0,1} Lower Panel Background lights
|
||
-- Baro altimetre
|
||
[87] = "%.4f", -- Baro_Altimeter_thousands Needle {0.0,1.0}
|
||
[573] = "%.4f", -- Baro_Altimeter_hundred Needle {0.0,1.0}
|
||
[88] = "%0.1f", -- Baro_Altimeter_press_unite 000X {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
[90] = "%0.1f", -- Baro_Altimeter_press_dix 00X0 {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
[92] = "%0.1f", -- Baro_Altimeter_press_cent 0X00 {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
[95] = "%0.1f", -- Baro_Altimeter_press_mille X000 {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
-- radar altimetre
|
||
[94] = "%.4f", -- Radar_Altimeter {0,5,10,20,30,40,50,60,70,80,90,100,110,120,130,140,150,200,250,300,350,400,450,500,550,600,650,700,750,800,850}{0,0.019,0.035,0.072,0.109,0.147,0.18,0.214,0.247,0.283,0.316,0.345,0.376,0.407,0.438,0.469,0.501,0.564,0.606,0.648,0.676,0.706,0.732,0.756,0.775,0.794,0.811,0.829,0.843,0.858,0.87}
|
||
[93] = "%.4f", -- DangerRALT_index {0,5,10,20,30,40,50,60,70,80,90,100,110,120,130,140,150,200,250,300,350,400,450,500,550,600,650,700,750,800,850}{0.0,0.0175,0.0338,0.0715,0.109,0.147,0.182,0.215,0.247,0.282,0.315,0.3445,0.377,0.407,0.439,0.47,0.5005,0.5628,0.6052,0.646,0.675,0.7058,0.7315,0.755,0.7747,0.793,0.8097,0.8272,0.8425,0.8575,0.8693}
|
||
--[97] = "%.f", -- RAltlamp {0,1}
|
||
[98] = "%.f", -- RAlt_flag_Panne OFF Flag{0,1}
|
||
[99] = "%.1f", -- RAlt_flag_MA A (Test) Flag{0,1}
|
||
[91] = "%.1f", -- RAlt_knob_MA Power/Test Knop{0,1}
|
||
-- TORQUE
|
||
[16] = "%.3f", -- Torque {0,5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100,105,110}{0.085,0.13,0.172,0.214,0.253,0.289,0.326,0.362,0.395,0.43,0.466,0.501,0.537,0.573,0.607,0.639,0.676,0.71,0.746,0.785,0.826,0.865,0.908}
|
||
[55] = "%.3f", -- Torque_Bug {0,5,10,15,20,25,30,35,40,45,50,55,60,65,70,75,80,85,90,95,100,105,110}{0.084,0.128,0.171,0.2134,0.252,0.2889,0.325,0.361,0.396,0.431,0.467,0.501,0.535,0.571,0.605,0.639,0.674,0.71,0.745,0.785,0.825,0.865,0.91}
|
||
[17] = "%.f", -- VOYANT_TORQUE Lamp {0,1}
|
||
-- Gyro_Compas
|
||
[26] = "%.3f", -- Gyro_Compas {0,30,60,90,120,150,180,210,240,270,300,330,360}{0,0.083,0.167,0.251,0.334,0.418,0.5,0.583,0.667,0.751,0.832,0.917,1}
|
||
-- Stby HA ADI
|
||
[214] = "%.4f", -- StbyHA_Roll {-180,-90,-60,-30,-20,-10,0,10,20,30,60,90,180}{-1,-0.502,-0.335,-0.166,-0.11,-0.052,0,0.055,0.113,0.171,0.334,0.502,1}
|
||
[213] = "%.4f", -- StbyHA_Pitch {-180,-150,-120,-90,-60,-50,-40,-30,-20,-15,-10,-5,0,5,10,15,20,30,40,50,60,90,120,150,180}{-1,-0.833,-0.667,-0.5,-0.333,-0.278,-0.223,-0.167,-0.111,-0.084,-0.057,-0.003,0,0.028,0.056,0.083,0.111,0.167,0.223,0.278,0.333,0.5,0.667,0.833,1}
|
||
[211] = "%.1f", -- StdbyHA_Flag Fault Flag {0,1}
|
||
[212] = "%.4f", -- Stdby_HA_W W Sympol {0,1}
|
||
[217] = "%.4f", -- Stdby_HA_Curseur Knob Needle {0,1}
|
||
-- QComb Fuel Indicator
|
||
[137] = "%.3f", -- QComb {0,50,100,150,200,250,300,350,400,500}{0.093,0.243,0.354,0.428,0.521,0.621,0.692,0.771,0.834,0.932}
|
||
-- Horizon Artificiel Principal
|
||
[27] = "%.4f", -- Pitch_HA {-180,-170,-160,-150,-140,-130,-120,-110,-100,-90,-80,-70,-60,-50,-40,-30,-20,-10,0,10,20,30,40,50,60,70,80,90,100,110,120,130,140,150,160,170,180}{-1,-0.946,-0.898,-0.838,-0.78,-0.723,-0.667,-0.61,-0.556,-0.501,-0.446,-0.393,-0.334,-0.277,-0.223,-0.166,-0.104,-0.054,0,0.054,0.102,0.161,0.22,0.277,0.333,0.389,0.443,0.498,0.553,0.607,0.666,0.722,0.776,0.834,0.896,0.946,1}
|
||
[28] = "%.4f", -- Roll_HA {-180,-90,-60,-30,-20,-10,0,10,20,30,60,90,180}{-1,-0.498,-0.331,-0.162,-0.111,-0.053,0,0.058,0.112,0.168,0.331,0.498,1}
|
||
[20] = "%.4f", -- Bille_HA Slip Ball {-1,1}
|
||
[18] = "%.1f", -- flag_GS_HA GS Flag {0,1}
|
||
[19] = "%.1f", -- flag_HS_HA Fault Flag {0,1}
|
||
[29] = "%.1f", -- flag_Lock_HA Lock Flag {0,1}
|
||
[117] = "%.4f", -- Curseur_HA Knob Needle {0,1}
|
||
[120] = "%.4f", -- W_HA W Sympol {-1,1}
|
||
[118] = "%.4f", -- VerBar_HA Vertical Bar {-1,1}
|
||
[119] = "%.4f", -- HorBar_HA Horizon Bar {-1,1}
|
||
-- variometre
|
||
[24] = "%.4f", -- Variometre {-800,-700,-600,-500,-400,-300,-200,-100,-50,0,50,100,200,300,400,500,600,700,800}{-0.481,-0.436,-0.391,-0.338,-0.28,-0.218,-0.153,-0.075,-0.035,0.0,0.035,0.071,0.139,0.202,0.264,0.32,0.372,0.418,0.463}
|
||
-- IAS
|
||
[51] = "%.4f", -- IAS {0,60,70,80,90,100,110,120,130,140,150,160,170,180,190,200,210,220,230,240,250,260,270,280,290,300,310,320,330,340,350,360,370}{0,0.1,0.133,0.172,0.207,0.243,0.277,0.316,0.35,0.38,0.41,0.439,0.465,0.491,0.517,0.541,0.565,0.587,0.611,0.63,0.651,0.671,0.692,0.712,0.731,0.75,0.77,0.791,0.809,0.829,0.849,0.867,0.886}
|
||
-- RPM
|
||
[135] = "%.4f", -- Turbine_RPM large Needle {0,5000,10000,15000,20000,25000,29000,35000,40000,43500,45000,50000}{0.095,0.181,0.263,0.346,0.424,0.505,0.572,0.665,0.748,0.802,0.828,0.909}
|
||
[52] = "%.4f", -- Rotor_RPM small Needle {0,50,100,150,200,250,262,316.29,361.05,387,400,450}{0.096,0.191,0.283,0.374,0.461,0.549,0.57,0.665,0.748,0.802,0.811,0.904}
|
||
-- Voltmetre
|
||
[14] = "%.3f", -- Voltmetre {0,5,10,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35}{0.045,0.074,0.103,0.133,0.163,0.192,0.221,0.25,0.281,0.31,0.339,0.368,0.399,0.429,0.458,0.488,0.518,0.547,0.576,0.605,0.635,0.664,0.695,0.724}
|
||
-- TQuatre Engine temperature Indicator
|
||
[15] = "%.3f", -- TQuatre Engine Temp {0,100,200,300,400,500,600,700,800}{0.1575,0.228,0.3,0.3845,0.473,0.577,0.676,0.772,0.8625}
|
||
-- TempExt outside temperature
|
||
[25] = "%.3f", -- TempExt {-40,-35,-30,-25,-20,-15,-10,-5,0,5,10,15,20,25,30,35,40,45,50,55,60,65,70}{-0.758,-0.691,-0.625,-0.558,-0.492,-0.425,-0.359,-0.292,-0.224,-0.158,-0.09,-0.024,0.043,0.11,0.177,0.244,0.31,0.379,0.445,0.512,0.579,0.644,0.712}
|
||
-- TempThm Oil Temperature Indicator
|
||
[151] = "%.3f", -- TempThm Oil Temp {-20,-10,0,10,20,30,40,50,60,70,80,85,90,100}{0.046,0.102,0.157,0.213,0.268,0.323,0.38,0.435,0.492,0.547,0.603,0.63,0.659,0.715}
|
||
-- Fuel Tank Indicator
|
||
[152] = "%.3f", -- Gauge_RSupp {-1,0,0.25,0.5,0.75,1}{0,0.202,0.426,0.63,0.801,1}
|
||
-- VHF AM Radio
|
||
[133] = "%.1f", -- AM_Radio_freq_cent {0,1} X00.000 {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
[134] = "%.1f", -- AM_Radio_freq_dix {0,1} 0X0.000 {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
[136] = "%.1f", -- AM_Radio_freq_unite {0,1} 00X.000 {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
[138] = "%.1f", -- AM_Radio_freq_dixieme {0,1} 000.X00 {0,1,2,3,4,5,6,7,8,9,0}{0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,1.0}
|
||
[139] = "%.2f", -- AM_Radio_freq_centieme {0,1} 000.0XX {00,25,50,75,00}{0.0,0.25,0.50,0.75,1.0}
|
||
-- Lamps
|
||
-- Voyant_DEM
|
||
[300] = "%.f", -- Voyant_DEM Start lamp{0,1}
|
||
-- Voyant_RLT
|
||
[301] = "%.f", -- Voyant_RLT Idle lamp {0,1}
|
||
-- Voyant_BLOC
|
||
[302] = "%.f", -- Voyant_BLOC Blocked Engine lamp {0,1}
|
||
-- RSUPP Fueltank
|
||
[320] = "%.f", -- Voyant_RSupp Fueltank lamp {0,1}
|
||
-- RCONV Convoy Fueltank
|
||
[321] = "%.f", -- Voyant_RConv Convoy Fueltank lamüp {0,1}
|
||
-- Voyant_FILTAS Sandfilter lamp
|
||
[322] = "%.f", -- Voyant_FILTAS sandfilter lamp {0,1}
|
||
-- Voyant_Alarme Master Alarme lamp
|
||
[303] = "%.f", -- Voyant_Alarme Master Alarme lamp {0,1}
|
||
-- AM_RADIO
|
||
[141] = "%.f", -- AM_Radio_lamp {0,1}
|
||
-- Tableau Alarme Lamps
|
||
[1] = "%.f", -- TA_Pitot {0,1}
|
||
[2] = "%.f", -- TA_Hmot {0,1}
|
||
[3] = "%.f", -- TA_Hbtp {0,1}
|
||
[4] = "%.f", -- TA_Hral {0,1}
|
||
[5] = "%.f", -- TA_Gene {0,1}
|
||
[6] = "%.f", -- TA_Alter {0,1}
|
||
[7] = "%.f", -- TA_Bat {0,1}
|
||
[8] = "%.f", -- TA_PA {0,1}
|
||
[9] = "%.f", -- TA_Nav {0,1}
|
||
[10] = "%.f", -- TA_Comb {0,1}
|
||
[11] = "%.f", -- TA_Bphy {0,1}
|
||
[12] = "%.f", -- TA_Lim {0,1}
|
||
[13] = "%.f", -- TA_Filt {0,1}
|
||
-- Intercomp Lamps
|
||
[455] = "%.f", -- Intercomp VHF Light
|
||
[456] = "%.f", -- Intercomp FM1 Light
|
||
[457] = "%.f", -- Intercomp UHF Light
|
||
-- SA342M HOT3 Weapon Panel Lamps
|
||
[183] = "%.f", -- HOT3 WP Lamps BON
|
||
[184] = "%.f", -- HOT3 WP Lamps MAUVAIS
|
||
[185] = "%.f", -- HOT3 WP Lamps ALIMENTATION
|
||
[186] = "%.f", -- HOT3 WP Lamps MISSILE PRET
|
||
[187] = "%.f", -- HOT3 WP Lamps TIR AUTOR.
|
||
[188] = "%.f", -- HOT3 WP Lamps DEFAUT
|
||
[189] = "%.f", -- HOT3 WP Lamps TEST I
|
||
[190] = "%.f", -- HOT3 WP Lamps JOUR
|
||
[191] = "%.f", -- HOT3 WP Lamps LUMINOSITE
|
||
[192] = "%.f", -- HOT3 WP Lamps TEST II
|
||
[193] = "%.f" -- HOT3 WP Lamps NUIT
|
||
}
|
||
|
||
ExportScript.ConfigArguments =
|
||
{
|
||
--[[
|
||
arguments for export in low tick interval
|
||
based on "clickabledata.lua"
|
||
]]
|
||
-- WEAPONS PANEL 1
|
||
[354] = "%1d", -- WP1 - Off/On/Stsnfby {-1.0,0.0,1.0}
|
||
[357] = "%.4f", -- WP1 - Brightness (Axis) {0.0, 1.0} in 0.1 Steps
|
||
-- WEAPONS PANEL 2
|
||
[372] = "%1d", -- WP2 - Ma Left
|
||
[373] = "%1d", -- WP2 - Ma Left Cover
|
||
[374] = "%1d", -- WP2 - Ma Right
|
||
[375] = "%1d", -- WP2 - Ma Right Cover
|
||
[376] = "%1d", -- WP2 - Seq Ripple selection
|
||
-- PILOTSIGHT
|
||
[171] = "%1d", -- PILOTSIGHT - Pilot Sight
|
||
-- PILOT STICK
|
||
--[50] = "%1d", -- PILOT STICK - Magnetic Brake
|
||
--[53] = "%1d", -- PILOT STICK - Wiper once
|
||
--[209] = "%1d", -- PILOT STICK - Autopilot Button
|
||
--[293] = "%1d", -- PILOT STICK - Slave
|
||
--[294] = "%1d", -- PILOT STICK - Auto-Hover
|
||
-- WSO LEFT SIDE STICK
|
||
[255] = "%1d", -- PE WSO STICK - Lasing Button Cover
|
||
[256] = "%1d", -- PE WSO STICK - Lasing Button
|
||
[257] = "%1d", -- PE WSO STICK - Missile Launch Cover
|
||
[258] = "%1d", -- PE WSO STICK - Missile Launch Button
|
||
[259] = "%1d", -- PE WSO STICK - Inversed Symbology Toggle
|
||
[260] = "%1d", -- PE WSO STICK - Inversed Image Toggle
|
||
[264] = "%.1f", -- PE WSO STICK - Image Focus {-1.0,1.0}
|
||
[262] = "%.1f", -- PE WSO STICK - Gain {-1.0,1.0}
|
||
[263] = "%.1f", -- PE WSO STICK - Image Brightness {-1.0,1.0}
|
||
[219] = "%.1f", -- PE WSO STICK - Symbology Brightness {-1.0,1.0}
|
||
-- GYRO
|
||
[197] = "%1d", -- GYRO - Test Cover
|
||
[198] = "%1d", -- GYRO - Test Switch On/Off
|
||
[199] = "%1d", -- GYRO - Left/Center/Right
|
||
[153] = "%.2f", -- GYRO - CM/A/GM/D/GD {0.0,0.25,0.50,0.75,1.0}
|
||
-- CLOCK
|
||
[45] = "%.4f", -- CLOCK - Winder (Axis) {0.0, 1.0} in 0.1 Steps
|
||
[46] = "%1d", -- CLOCK - Start/Stop
|
||
[47] = "%1d", -- CLOCK - Reset
|
||
-- SA342M HOT3 only
|
||
-- PH SA342M HOT3
|
||
[180] = "%.2f", -- PH - Test II/Test I/Off/Day/Night {0.0,0.25,0.50,0.75,1.0}
|
||
[181] = "%.3f", -- PH - Station Select 0/1/0/2/0/3/0/4/0 {0.0,0.125,0.250,0,375,0.500,0.625,0.750,0.875,1.0}
|
||
[182] = "%.4f", -- PH - Brightness (Axis) {0.0, 1.0} in 0.1 Steps
|
||
-- PE SA342L/M/Mistral BCV (BOITIER DE COMMANDE VIDEO – video command box)
|
||
[362] = "%1d", -- PE BCV - Centering
|
||
[364] = "%1d", -- PE BCV - VDO/VTH
|
||
[365] = "%.1f", -- PE BCV - Zoom {-1.0,1.0}
|
||
[366] = "%.1f", -- PE BCV - CTH A/V/M {0.0,0.5,1.0}
|
||
[367] = "%1d", -- PE BCV - Power
|
||
[370] = "%.2f", -- PE BCV - Mode A/C/V/PIL/ASS {0.0,0.25,0.50,0.75,1.0}
|
||
-- NADIR
|
||
[330] = "%.4f", -- NADIR - Off/Brightness (Axis) {0.0, 1.0} in 0.1 Steps
|
||
[331] = "%.2f", -- NADIR - Mode Off/Stby/Ground/Sea/Air Speed Sensor/Ground Test {0.0,0.2,0.4,0.6,0.8,1.0}
|
||
[332] = "%.2f", -- NADIR - Parameter Wind/Magnetic Heading/Ground Speed/Calculated Time/Current Position/Waypoint {0.0,0.2,0.4,0.6,0.8,1.0}
|
||
[333] = "%1d", -- NADIR - ENT
|
||
[334] = "%1d", -- NADIR - DES
|
||
[335] = "%1d", -- NADIR - AUX
|
||
[336] = "%1d", -- NADIR - IC
|
||
[337] = "%1d", -- NADIR - DOWN
|
||
[351] = "%1d", -- NADIR - 0
|
||
[338] = "%1d", -- NADIR - 1
|
||
[339] = "%1d", -- NADIR - 2
|
||
[340] = "%1d", -- NADIR - 3
|
||
[342] = "%1d", -- NADIR - 4
|
||
[343] = "%1d", -- NADIR - 5
|
||
[344] = "%1d", -- NADIR - 6
|
||
[346] = "%1d", -- NADIR - 7
|
||
[347] = "%1d", -- NADIR - 8
|
||
[348] = "%1d", -- NADIR - 9
|
||
[341] = "%1d", -- NADIR - POL
|
||
[345] = "%1d", -- NADIR - GEO
|
||
[349] = "%1d", -- NADIR - POS
|
||
[350] = "%1d", -- NADIR - GEL
|
||
[352] = "%1d", -- NADIR - EFF
|
||
-- AM_RADIO
|
||
[128] = "%.2f", -- AM RADIO - Selector {0.0,0.33,0.66,0.99}
|
||
[129] = "%.4f", -- AM RADIO - Freq decimals (Axis) {0.0, 1.0} in 0.1 Steps
|
||
[130] = "%1d", -- AM RADIO - 25/50kHz Selector
|
||
[131] = "%.4f", -- AM RADIO - Freq dial (Axis) {0.0, 1.0} in 0.1 Steps
|
||
-- FM_RADIO
|
||
[272] = "%.2f", -- FM RADIO - Main Selector {0.0,0.25,0.50,0.75,1.0}
|
||
[273] = "%.3f", -- FM RADIO - Chanel Selector {0.0,0.143,0.286,0.429,0.572,0.715,0.858,1.0}
|
||
[274] = "%1d", -- FM RADIO - 7
|
||
[275] = "%1d", -- FM RADIO - 8
|
||
[276] = "%1d", -- FM RADIO - 9
|
||
[277] = "%1d", -- FM RADIO - 0
|
||
[278] = "%1d", -- FM RADIO - X
|
||
[279] = "%1d", -- FM RADIO - 4
|
||
[280] = "%1d", -- FM RADIO - 5
|
||
[281] = "%1d", -- FM RADIO - 6
|
||
[282] = "%1d", -- FM RADIO - RC
|
||
[283] = "%1d", -- FM RADIO - UP
|
||
[284] = "%1d", -- FM RADIO - 1
|
||
[285] = "%1d", -- FM RADIO - 2
|
||
[286] = "%1d", -- FM RADIO - 3
|
||
[287] = "%1d", -- FM RADIO - VAL
|
||
[288] = "%1d", -- FM RADIO - DOWN
|
||
-- TV
|
||
[124] = "%1d", -- TV - On/Off
|
||
[125] = "%.4f", -- TV - Contrast (Axis) {0.0, 1.0} in 0.1 Steps
|
||
[123] = "%.4f", -- TV - Brightness (Axis) {0.0, 1.0} in 0.1 Steps
|
||
--[126] = "%.4f", -- TV - Cover (Axis) {0.0, 1.0} in 0.1 Steps
|
||
-- RWR
|
||
[148] = "%1d", -- RWR - Off/On/Croc {-1.0,0.0,1.0}
|
||
[149] = "%1d", -- RWR - Marker
|
||
[150] = "%1d", -- RWR - Page
|
||
[121] = "%.4f", -- RWR - Audio (Axis) {0.0, 1.0} in 0.1 Steps
|
||
[122] = "%.4f", -- RWR - Brightness (Axis) {0.0, 1.0} in 0.1 Steps
|
||
-- ADI
|
||
[115] = "%.4f", -- ADI - Unlock (Axis) {0.0, 1.0} in 0.1 Steps
|
||
[116] = "%1d", -- ADI - Unlock
|
||
-- Stby ADI
|
||
[215] = "%.4f", -- STDBY ADI - Unlock (Axis) {0.0, 1.0} in 0.1 Steps
|
||
[216] = "%1d", -- STDBY ADI - Unlock
|
||
-- ArtVisVhfDop (Source selector for main artificial horizon vertical bar)
|
||
[218] = "%.2f", -- ADI - Source Off/Camera target point/ADF ermitter/NADIR Waypoint {0.0,0.33,0.66,0.99}
|
||
-- INTERCOM
|
||
[452] = "%1d", -- INTERCOM - VHF AM Radio
|
||
[68] = "%.4f", -- INTERCOM - VHF AM Radio Volume (Axis) {0.0, 1.0} in 0.1 Steps
|
||
[453] = "%1d", -- INTERCOM - FM Radio
|
||
[69] = "%.4f", -- INTERCOM - FM Radio Volume (Axis) {0.0, 1.0} in 0.1 Steps
|
||
[454] = "%1d", -- INTERCOM - UHF Radio
|
||
[70] = "%.4f", -- INTERCOM - UHF Radio Volume (Axis) {0.0, 1.0} in 0.1 Steps
|
||
-- TORQUE
|
||
[58] = "%1d", -- TORQUE Bug/Test
|
||
[54] = "%.4f", -- TORQUE Bug/Test (Axis) {0.0, 1.0} in 0.1 Steps
|
||
-- LIGHTS
|
||
[22] = "%.4f", -- LIGHTS - Main Dashboard Lighting (Axis) {0.0, 1.0} in 0.1 Steps
|
||
[21] = "%.4f", -- LIGHTS - Console Lighting (Axis) {0.0, 1.0} in 0.1 Steps
|
||
[145] = "%.4f", -- LIGHTS - UV Lighting (Axis) {0.0, 1.0} in 0.1 Steps
|
||
[23] = "%1d", -- LIGHTS - NORM/BNL
|
||
[147] = "%.4f", -- LIGHTS - Roof Lamp Knob (Axis) {0.0, 1.0} in 0.1 Steps
|
||
[154] = "%1d", -- LIGHTS - Red Lens On/Off
|
||
-- ELECTRIC
|
||
[264] = "%1d", -- ELECTRIC - Battery
|
||
[265] = "%1d", -- ELECTRIC - Alternator
|
||
[268] = "%1d", -- ELECTRIC - Generator
|
||
[62] = "%1d", -- ELECTRIC - Voltmeter Test
|
||
[170] = "%1d", -- ELECTRIC - Pitot
|
||
[271] = "%1d", -- ELECTRIC - Fuel Pump
|
||
[267] = "%1d", -- ELECTRIC - Additionnal Fuel Tank
|
||
[56] = "%1d", -- ELECTRIC - Starter Start/Stop/Air {-1.0,0.0,1.0}
|
||
[57] = "%1d", -- ELECTRIC - Test
|
||
[48] = "%1d", -- ELECTRIC - Copilot Wiper {-1.0,0.0,1.0}
|
||
[49] = "%1d", -- ELECTRIC - Pilot Wiper {-1.0,0.0,1.0}
|
||
[61] = "%1d", -- ELECTRIC - Left from Pitot
|
||
[59] = "%1d", -- ELECTRIC - HYD Test
|
||
[66] = "%1d", -- ELECTRIC - Alter Rearm
|
||
[67] = "%1d", -- ELECTRIC - Gene Rearm
|
||
[63] = "%1d", -- ELECTRIC - Convoy Tank On/Off
|
||
[64] = "%1d", -- ELECTRIC - Sand Filter On/Off
|
||
-- NAVLIGHTS
|
||
[146] = "%1d", -- NAVLIGHTS - Navigation Lights CLI/OFF/FIX {-1.0,0.0,1.0}
|
||
[228] = "%1d", -- NAVLIGHTS - Anticollision Light NOR/OFF/ATT {-1.0,0.0,1.0}
|
||
[105] = "%1d", -- NAVLIGHTS - Landing Light Off/Vario/On {-1.0,0.0,1.0}
|
||
[106] = "%1d", -- NAVLIGHTS - Landing Light Extend/Retract
|
||
[382] = "%1d", -- NAVLIGHTS - Panels Lighting On/Off
|
||
[30] = "%.4f", -- NAVLIGHTS - AntiCollision Light Intensity (Axis) {0.0, 1.0} in 0.1 Steps
|
||
[229] = "%1d", -- NAVLIGHTS - Formation Lights On/Off
|
||
[230] = "%.4f", -- NAVLIGHTS - Formation Lights Intensity (Axis) {0.0, 1.0} in 0.1 Steps
|
||
-- FLARE DISPENSER
|
||
[220] = "%1d", -- FLARE DISPENSER - G/G+D/D {-1.0,0.0,1.0}
|
||
[221] = "%1d", -- FLARE DISPENSER - Mode
|
||
[222] = "%1d", -- FLARE DISPENSER - Off/Speed {-1.0,0.0,1.0}
|
||
[194] = "%1d", -- FLARE DISPENSER - Fire Button Cover
|
||
[195] = "%1d", -- FLARE DISPENSER - Fire Button
|
||
-- AUTOPILOT
|
||
[31] = "%1d", -- AUTOPILOT - Autopilot On/Off
|
||
[32] = "%1d", -- AUTOPILOT - Pitch On/Off
|
||
[33] = "%1d", -- AUTOPILOT - Roll On/Off
|
||
[34] = "%1d", -- AUTOPILOT - Yaw On/Off
|
||
[35] = "%1d", -- AUTOPILOT - Mode Speed/OFF/Altitude {-1.0,0.0,1.0}
|
||
[60] = "%1d", -- AUTOPILOT - Trim On/Off
|
||
[65] = "%1d", -- AUTOPILOT - Magnetic Brake On/Off
|
||
-- WEAPONS
|
||
[269] = "%1d", -- WEAPONS - Master arm On/Off
|
||
-- ROTORS
|
||
[556] = "%.4f", -- ROTORS - Rotor Brake (Axis) {0.0, 1.0} in 0.055 Steps
|
||
-- RADIOALTIMETER
|
||
[96] = "%.4f", -- RADIOALTIMETER - Radar Alt Bug (Axis) {0.0, 1.0} in 0.1 Steps
|
||
[100] = "%1d", -- RADIOALTIMETER - Radar Alt On/Off - Test
|
||
[91] = "%.4f", -- RADIOALTIMETER - Radar Alt On/Off - Test (Axis) {0.0, 1.0} in 0.1 Steps
|
||
-- BAROALTIMETER
|
||
[89] = "%.4f", -- BAROALTIMETER - Baro pressure QFE knob (Axis) {0.0, 1.0} in 0.1 Steps
|
||
-- FUEL SYSTEM
|
||
[557] = "%.4f", -- FUEL SYSTEM - Fuel Flow Lever (Axis) {0.0, 1.0} in 0.2 Steps
|
||
-- ADF RADIO
|
||
[166] = "%1d", -- ADF RADIO - Select
|
||
[167] = "%1d", -- ADF RADIO - Tone
|
||
[178] = "%.2f", -- ADF RADIO - Mode {0.0,0.33,0.66,0.99}
|
||
[179] = "%.4f", -- ADF RADIO - Gain (Axis) {0.0, 1.0} in 0.2 Steps
|
||
[168] = "%.4f", -- ADF RADIO - Nav1 Hundred (Axis) {0.0, 1.0} in 0.2 Steps
|
||
[169] = "%.4f", -- ADF RADIO - Nav1 Ten (Axis) {0.0, 1.0} in 0.2 Steps
|
||
[173] = "%.4f", -- ADF RADIO - Nav1 Unit (Axis) {0.0, 1.0} in 0.2 Steps
|
||
[174] = "%.4f", -- ADF RADIO - Nav2 Hundred (Axis) {0.0, 1.0} in 0.2 Steps
|
||
[175] = "%.4f", -- ADF RADIO - Nav2 Ten (Axis) {0.0, 1.0} in 0.2 Steps
|
||
[176] = "%.4f", -- ADF RADIO - Nav2 Unit (Axis) {0.0, 1.0} in 0.2 Steps
|
||
-- UHF RADIO
|
||
[383] = "%.3f", -- UHF RADIO - MODE 0/FF/NA/SV/DL/G/EN {0.0,0.167,0.334,0.501,0.668,0.835,1.0}
|
||
[384] = "%1d", -- UHF RADIO - DRW
|
||
[385] = "%1d", -- UHF RADIO - VLD
|
||
[386] = "%.4f", -- UHF RADIO - PAGE (Axis) {0.0, 1.0} in 0.2 Steps
|
||
[387] = "%1d", -- UHF RADIO - CONF
|
||
[388] = "%1d", -- UHF RADIO - 1
|
||
[389] = "%1d", -- UHF RADIO - 2
|
||
[390] = "%1d", -- UHF RADIO - 3
|
||
[391] = "%1d", -- UHF RADIO - 4
|
||
[392] = "%1d", -- UHF RADIO - 5
|
||
[393] = "%1d", -- UHF RADIO - 6
|
||
[394] = "%1d", -- UHF RADIO - 7
|
||
[395] = "%1d", -- UHF RADIO - 8
|
||
[396] = "%1d", -- UHF RADIO - 9
|
||
[397] = "%1d" -- UHF RADIO - 0
|
||
}
|
||
|
||
-----------------------------
|
||
-- HIGH IMPORTANCE EXPORTS --
|
||
-- done every export event --
|
||
-----------------------------
|
||
|
||
-- Pointed to by ProcessIkarusDCSHighImportance
|
||
function ExportScript.ProcessIkarusDCSConfigHighImportance(mainPanelDevice)
|
||
--[[
|
||
every frame export to Ikarus
|
||
Example from A-10C
|
||
Get Radio Frequencies
|
||
get data from device
|
||
local lUHFRadio = GetDevice(54)
|
||
ExportScript.Tools.SendData("ExportID", "Format")
|
||
ExportScript.Tools.SendData(2000, string.format("%7.3f", lUHFRadio:get_frequency()/1000000)) -- <- special function for get frequency data
|
||
ExportScript.Tools.SendData(2000, ExportScript.Tools.RoundFreqeuncy((UHF_RADIO:get_frequency()/1000000))) -- ExportScript.Tools.RoundFreqeuncy(frequency (MHz|KHz), format ("7.3"), PrefixZeros (false), LeastValue (0.025))
|
||
]]
|
||
--[97] = "%.f", -- RAltlamp {0,1}
|
||
ExportScript.Tools.SendData(97, (mainPanelDevice:get_argument_value(97) > 0.009 and 1 or 0))
|
||
end
|
||
|
||
function ExportScript.ProcessDACConfigHighImportance(mainPanelDevice)
|
||
--[[
|
||
every frame export to DAC
|
||
Example from A-10C
|
||
Get Radio Frequencies
|
||
get data from device
|
||
local UHF_RADIO = GetDevice(54)
|
||
ExportScript.Tools.SendDataDAC("ExportID", "Format")
|
||
ExportScript.Tools.SendDataDAC("ExportID", "Format", HardwareConfigID)
|
||
ExportScript.Tools.SendDataDAC("2000", string.format("%7.3f", UHF_RADIO:get_frequency()/1000000))
|
||
ExportScript.Tools.SendDataDAC("2000", ExportScript.Tools.RoundFreqeuncy((UHF_RADIO:get_frequency()/1000000))) -- ExportScript.Tools.RoundFreqeuncy(frequency (MHz|KHz), format ("7.3"), PrefixZeros (false), LeastValue (0.025))
|
||
]]
|
||
end
|
||
|
||
-----------------------------------------------------
|
||
-- LOW IMPORTANCE EXPORTS --
|
||
-- done every gExportLowTickInterval export events --
|
||
-----------------------------------------------------
|
||
|
||
-- Pointed to by ExportScript.ProcessIkarusDCSConfigLowImportance
|
||
function ExportScript.ProcessIkarusDCSConfigLowImportance(mainPanelDevice)
|
||
--[[
|
||
export in low tick interval to Ikarus
|
||
Example from A-10C
|
||
Get Radio Frequencies
|
||
get data from device
|
||
local lUHFRadio = GetDevice(54)
|
||
ExportScript.Tools.SendData("ExportID", "Format")
|
||
ExportScript.Tools.SendData(2000, string.format("%7.3f", lUHFRadio:get_frequency()/1000000)) -- <- special function for get frequency data
|
||
ExportScript.Tools.SendData(2000, ExportScript.Tools.RoundFreqeuncy((UHF_RADIO:get_frequency()/1000000))) -- ExportScript.Tools.RoundFreqeuncy(frequency (MHz|KHz), format ("7.3"), PrefixZeros (false), LeastValue (0.025))
|
||
]]
|
||
|
||
-- UHF Radio
|
||
---------------------------------------------------
|
||
local lUHFRadio = GetDevice(31)
|
||
if lUHFRadio:is_on() then
|
||
--ExportScript.Tools.SendData(2000, string.format("%.3f", lUHFRadio:get_frequency()/1000000))
|
||
--ExportScript.Tools.WriteToLog('UHF_Freq: '..ExportScript.Tools.dump(list_indication(5)))
|
||
|
||
local lUHFRadioFreq = ExportScript.Tools.getListIndicatorValue(5)
|
||
|
||
if lUHFRadioFreq ~= nil and lUHFRadioFreq.UHF_Freq ~= nil then
|
||
ExportScript.Tools.SendData(2000, string.format("%s", lUHFRadioFreq.UHF_Freq))
|
||
end
|
||
else
|
||
ExportScript.Tools.SendData(2000, " ")
|
||
end
|
||
|
||
-- AM Radio
|
||
---------------------------------------------------
|
||
local lAMRadio = GetDevice(5)
|
||
if lAMRadio:is_on() then
|
||
--ExportScript.Tools.SendData(2001, string.format("%.3f", lAMRadio:get_frequency()/1000000))
|
||
ExportScript.Tools.SendData(2001, ExportScript.Tools.RoundFreqeuncy(lAMRadio:get_frequency()/1000000))
|
||
end
|
||
|
||
-- FM Radio PR4G
|
||
---------------------------------------------------
|
||
local lFMRadio = GetDevice(28)
|
||
if lFMRadio:is_on() then
|
||
--ExportScript.Tools.SendData(2002, string.format("%.3f", lFMRadio:get_frequency()/1000000))
|
||
--ExportScript.Tools.WriteToLog('FM_Freq: '..ExportScript.Tools.dump(list_indication(4)))
|
||
|
||
local lFMRadioFreq = ExportScript.Tools.getListIndicatorValue(4)
|
||
|
||
if lFMRadioFreq ~= nil and lFMRadioFreq.FM_Freq ~= nil then
|
||
ExportScript.Tools.SendData(2002, string.format("%s", lFMRadioFreq.FM_Freq))
|
||
end
|
||
else
|
||
ExportScript.Tools.SendData(2002, " ")
|
||
end
|
||
|
||
-- [273] = "%.3f", -- FM RADIO - Chanel Selector {0.0,0.143,0.286,0.429,0.572,0.715,0.858,1.0} -- laut clickabledata.lua
|
||
-- [273] = "%.1f", -- FM RADIO - Chanel Selector {0.0,0.2,0.3,0.5,0.6,0.8,0.9,1.1} -- gerundet
|
||
local lFM_RADIO_PRESET = {[0.0]="1",[0.2]="2",[0.3]="3",[0.5]="4",[0.6]="5",[0.8]="6",[0.9]="0",[1.1]="R"}
|
||
ExportScript.Tools.SendData(2003, lFM_RADIO_PRESET[ExportScript.Tools.round(mainPanelDevice:get_argument_value(273), 1, "ceil")])
|
||
|
||
-- Weapon Panel
|
||
---------------------------------------------------
|
||
if mainPanelDevice:get_argument_value(354) >= 0.0 then -- Weapon panel is On
|
||
local lWeaponPanelDisplays = ExportScript.Tools.getListIndicatorValue(8)
|
||
|
||
if lWeaponPanelDisplays ~= nil then
|
||
if lWeaponPanelDisplays.LEFT_screen ~= nil then
|
||
ExportScript.Tools.SendData(2004, string.format("%s", lWeaponPanelDisplays.LEFT_screen))
|
||
end
|
||
if lWeaponPanelDisplays.RIGHT_screen ~= nil then
|
||
ExportScript.Tools.SendData(2005, string.format("%s", lWeaponPanelDisplays.RIGHT_screen))
|
||
end
|
||
end
|
||
else
|
||
ExportScript.Tools.SendData(2004, "-")
|
||
ExportScript.Tools.SendData(2005, "-")
|
||
end
|
||
end
|
||
|
||
function ExportScript.ProcessDACConfigLowImportance(mainPanelDevice)
|
||
--[[
|
||
export in low tick interval to DAC
|
||
Example from A-10C
|
||
Get Radio Frequencies
|
||
get data from device
|
||
local UHF_RADIO = GetDevice(54)
|
||
ExportScript.Tools.SendDataDAC("ExportID", "Format")
|
||
ExportScript.Tools.SendDataDAC("ExportID", "Format", HardwareConfigID)
|
||
ExportScript.Tools.SendDataDAC("2000", string.format("%7.3f", UHF_RADIO:get_frequency()/1000000))
|
||
ExportScript.Tools.SendDataDAC("2000", ExportScript.Tools.RoundFreqeuncy((UHF_RADIO:get_frequency()/1000000))) -- ExportScript.Tools.RoundFreqeuncy(frequency (MHz|KHz), format ("7.3"), PrefixZeros (false), LeastValue (0.025))
|
||
]]
|
||
|
||
-- UHF Radio
|
||
---------------------------------------------------
|
||
local lUHFRadio = GetDevice(31)
|
||
if lUHFRadio:is_on() then
|
||
--ExportScript.Tools.SendDataDAC("2000", string.format("%.3f", lUHFRadio:get_frequency()/1000000))
|
||
--ExportScript.Tools.WriteToLog('UHF_Freq: '..ExportScript.Tools.dump(list_indication(5)))
|
||
|
||
local lUHFRadioFreq = ExportScript.Tools.getListIndicatorValue(5)
|
||
|
||
if lUHFRadioFreq ~= nil and lUHFRadioFreq.UHF_Freq ~= nil then
|
||
ExportScript.Tools.SendDataDAC("2000", string.format("%s", lUHFRadioFreq.UHF_Freq))
|
||
end
|
||
else
|
||
ExportScript.Tools.SendDataDAC("2000", "-")
|
||
end
|
||
|
||
-- AM Radio
|
||
---------------------------------------------------
|
||
local lAMRadio = GetDevice(5)
|
||
if lAMRadio:is_on() then
|
||
--ExportScript.Tools.SendDataDAC("2001", string.format("%.3f", lAMRadio:get_frequency()/1000000))
|
||
ExportScript.Tools.SendDataDAC("2001", ExportScript.Tools.RoundFreqeuncy(lAMRadio:get_frequency()/1000000))
|
||
end
|
||
|
||
-- FM Radio PR4G
|
||
---------------------------------------------------
|
||
local lFMRadio = GetDevice(28)
|
||
if lFMRadio:is_on() then
|
||
--ExportScript.Tools.SendDataDAC(2002, string.format("%.3f", lFMRadio:get_frequency()/1000000))
|
||
--ExportScript.Tools.WriteToLog('FM_Freq: '..ExportScript.Tools.dump(list_indication(4)))
|
||
|
||
local lFMRadioFreq = ExportScript.Tools.getListIndicatorValue(4)
|
||
|
||
if lFMRadioFreq ~= nil and lFMRadioFreq.FM_Freq ~= nil then
|
||
ExportScript.Tools.SendDataDAC("2002", string.format("%s", lFMRadioFreq.FM_Freq))
|
||
end
|
||
else
|
||
ExportScript.Tools.SendDataDAC("2002", "-")
|
||
end
|
||
|
||
-- [273] = "%.3f", -- FM RADIO - Chanel Selector {0.0,0.143,0.286,0.429,0.572,0.715,0.858,1.0} -- laut clickabledata.lua
|
||
-- [273] = "%.1f", -- FM RADIO - Chanel Selector {0.0,0.2,0.3,0.5,0.6,0.8,0.9,1.1} -- gerundet
|
||
local lFM_RADIO_PRESET = {[0.0]="1",[0.2]="2",[0.3]="3",[0.5]="4",[0.6]="5",[0.8]="6",[0.9]="0",[1.1]="R"}
|
||
ExportScript.Tools.SendDataDAC("2003", lFM_RADIO_PRESET[ExportScript.Tools.round(mainPanelDevice:get_argument_value(273), 1, "ceil")])
|
||
|
||
-- Weapon Panel
|
||
---------------------------------------------------
|
||
if mainPanelDevice:get_argument_value(354) >= 0.0 then -- Weapon panel is On
|
||
local lWeaponPanelDisplays = ExportScript.Tools.getListIndicatorValue(8)
|
||
|
||
if lWeaponPanelDisplays ~= nil then
|
||
if lWeaponPanelDisplays.LEFT_screen ~= nil then
|
||
ExportScript.Tools.SendDataDAC("2004", string.format("%s", lWeaponPanelDisplays.LEFT_screen))
|
||
end
|
||
if lWeaponPanelDisplays.RIGHT_screen ~= nil then
|
||
ExportScript.Tools.SendDataDAC("2005", string.format("%s", lWeaponPanelDisplays.RIGHT_screen))
|
||
end
|
||
end
|
||
else
|
||
ExportScript.Tools.SendDataDAC("2004", "-")
|
||
ExportScript.Tools.SendDataDAC("2005", "-")
|
||
end
|
||
|
||
-- generic Radio display and frequency rotarys
|
||
-------------------------------------------------
|
||
-- genericRadioConf
|
||
ExportScript.genericRadioConf = {}
|
||
ExportScript.genericRadioConf['maxRadios'] = 3 -- numbers of aviables/supported radios
|
||
ExportScript.genericRadioConf[1] = {} -- first radio
|
||
ExportScript.genericRadioConf[1]['Name'] = "UHF Radio" -- name of radio
|
||
ExportScript.genericRadioConf[1]['DeviceID'] = 31 -- DeviceID for GetDevice from device.lua
|
||
ExportScript.genericRadioConf[1]['setFrequency'] = true -- change frequency active
|
||
ExportScript.genericRadioConf[1]['FrequencyMultiplicator'] = 1000000 -- Multiplicator from Hz to MHz
|
||
ExportScript.genericRadioConf[1]['FrequencyFormat'] = "%7.3f" -- frequency view format LUA style
|
||
ExportScript.genericRadioConf[1]['FrequencyStep'] = 25 -- minimal step for frequency change
|
||
ExportScript.genericRadioConf[1]['minFrequency'] = 225.000 -- lowest frequency
|
||
ExportScript.genericRadioConf[1]['maxFrequency'] = 399.975 -- highest frequency
|
||
ExportScript.genericRadioConf[1]['Power'] = {} -- power button active
|
||
ExportScript.genericRadioConf[1]['Power']['ButtonID'] = 3001 -- power button id from cklickable.lua
|
||
ExportScript.genericRadioConf[1]['Power']['ValueOn'] = 0.167 -- power on value from cklickable.lua
|
||
ExportScript.genericRadioConf[1]['Power']['ValueOff'] = 0.0 -- power off value from cklickable.lua
|
||
--ExportScript.genericRadioConf[1]['Volume'] = {} -- volume knob active
|
||
--ExportScript.genericRadioConf[1]['Volume']['ButtonID'] = 3011 -- volume button id from cklickable.lua
|
||
--ExportScript.genericRadioConf[1]['Preset'] = {} -- preset knob active
|
||
--ExportScript.genericRadioConf[1]['Preset']['ArgumentID'] = 161 -- ManualPreset argument id from cklickable.lua
|
||
--ExportScript.genericRadioConf[1]['Preset']['ButtonID'] = 3001 -- preset button id from cklickable.lua
|
||
-- Preset based on switchlogic on clickabledata.lua
|
||
--ExportScript.genericRadioConf[1]['Preset']['List'] = {[0.0]="01",[0.05]="02",[0.10]="03",[0.15]="04",[0.20]="05",[0.25]="06",[0.30]="07",[0.35]="08",[0.40]="09",[0.45]="10",[0.50]="11",[0.55]="12",[0.60]="13",[0.65]="14",[0.70]="15",[0.75]="16",[0.80]="17",[0.85]="18",[0.90]="19",[0.95]="20",[1.00]="01"}
|
||
--ExportScript.genericRadioConf[1]['Preset']['Step'] = 0.05 -- minimal step for preset change
|
||
--ExportScript.genericRadioConf[1]['Squelch'] = {} -- squelch switch active
|
||
--ExportScript.genericRadioConf[1]['Squelch']['ArgumentID'] = 170 -- ManualPreset argument id from cklickable.lua
|
||
--ExportScript.genericRadioConf[1]['Squelch']['ButtonID'] = 3010 -- squelch button id from cklickable.lua
|
||
--ExportScript.genericRadioConf[1]['Squelch']['ValueOn'] = 0.0 -- squelch on value from cklickable.lua
|
||
--ExportScript.genericRadioConf[1]['Squelch']['ValueOff'] = 1.0 -- squelch off value from cklickable.lua
|
||
-- Load Button = VLD Button
|
||
ExportScript.genericRadioConf[1]['Load'] = {} -- load button preset
|
||
ExportScript.genericRadioConf[1]['Load']['ButtonID'] = 3003 -- load button id from cklickable.lua
|
||
--ExportScript.genericRadioConf[1]['ManualPreset'] = {} -- switch manual or preset active
|
||
--ExportScript.genericRadioConf[1]['ManualPreset']['ArgumentID'] = 167 -- ManualPreset argument id from cklickable.lua
|
||
--ExportScript.genericRadioConf[1]['ManualPreset']['ButtonID'] = 3007 -- ManualPreset button id from cklickable.lua
|
||
--ExportScript.genericRadioConf[1]['ManualPreset']['ValueManual'] = 0.0-- ManualPreset Manual value from cklickable.lua
|
||
--ExportScript.genericRadioConf[1]['ManualPreset']['ValuePreset'] = 0.1-- ManualPreset Preset value from cklickable.lua
|
||
|
||
ExportScript.genericRadioConf[2] = {} -- secound radio
|
||
ExportScript.genericRadioConf[2]['Name'] = "AM Radio" -- name of radio
|
||
ExportScript.genericRadioConf[2]['DeviceID'] = 5 -- DeviceID for GetDevice from device.lua
|
||
ExportScript.genericRadioConf[2]['setFrequency'] = true -- change frequency active
|
||
ExportScript.genericRadioConf[2]['FrequencyMultiplicator'] = 1000000 -- Multiplicator from Hz to MHz
|
||
ExportScript.genericRadioConf[2]['FrequencyFormat'] = "%7.3f" -- frequency view format LUA style
|
||
ExportScript.genericRadioConf[2]['FrequencyStep'] = 25 -- minimal step for frequency change
|
||
ExportScript.genericRadioConf[2]['minFrequency'] = 118.000 -- lowest frequency
|
||
ExportScript.genericRadioConf[2]['maxFrequency'] = 143.975 -- highest frequency
|
||
ExportScript.genericRadioConf[2]['Power'] = {} -- power button active
|
||
ExportScript.genericRadioConf[2]['Power']['ButtonID'] = 3001 -- power button id from cklickable.lua
|
||
ExportScript.genericRadioConf[2]['Power']['ValueOn'] = 0.33 -- power on value from cklickable.lua
|
||
ExportScript.genericRadioConf[2]['Power']['ValueOff'] = 0.0 -- power off value from cklickable.lua
|
||
--ExportScript.genericRadioConf[2]['Volume'] = {} -- volume knob active
|
||
--ExportScript.genericRadioConf[2]['Volume']['ButtonID'] = 3005 -- volume button id from cklickable.lua
|
||
--ExportScript.genericRadioConf[2]['Preset'] = {} -- preset knob active
|
||
--ExportScript.genericRadioConf[2]['Preset']['ArgumentID'] = 137 -- ManualPreset argument id from cklickable.lua
|
||
--ExportScript.genericRadioConf[2]['Preset']['ButtonID'] = 3001 -- preset button id from cklickable.lua
|
||
-- Preset based on switchlogic on clickabledata.lua
|
||
--ExportScript.genericRadioConf[2]['Preset']['List'] = {[0.0]="01",[0.01]="02",[0.02]="03",[0.03]="04",[0.04]="05",[0.05]="06",[0.06]="07",[0.07]="08",[0.08]="09",[0.09]="10",[0.10]="11",[0.11]="12",[0.12]="13",[0.13]="14",[0.14]="15",[0.15]="16",[0.16]="17",[0.17]="18",[0.18]="19",[0.19]="20",[0.20]="01"}
|
||
--ExportScript.genericRadioConf[2]['Preset']['Step'] = 0.01 -- minimal step for preset change
|
||
--ExportScript.genericRadioConf[2]['Squelch'] = {} -- squelch switch active
|
||
--ExportScript.genericRadioConf[2]['Squelch']['ArgumentID'] = 134 -- ManualPreset argument id from cklickable.lua
|
||
--ExportScript.genericRadioConf[2]['Squelch']['ButtonID'] = 3008 -- squelch button id from cklickable.lua
|
||
--ExportScript.genericRadioConf[2]['Squelch']['ValueOn'] = 0.0 -- squelch on value from cklickable.lua
|
||
--ExportScript.genericRadioConf[2]['Squelch']['ValueOff'] = 1.0 -- squelch off value from cklickable.lua
|
||
--ExportScript.genericRadioConf[2]['Load'] = {} -- load button preset
|
||
--ExportScript.genericRadioConf[2]['Load']['ButtonID'] = 3006 -- load button id from cklickable.lua
|
||
--ExportScript.genericRadioConf[2]['ManualPreset'] = {} -- switch manual or preset active
|
||
--ExportScript.genericRadioConf[2]['ManualPreset']['ArgumentID'] = 135 -- ManualPreset argument id from cklickable.lua
|
||
--ExportScript.genericRadioConf[2]['ManualPreset']['ButtonID'] = 3004 -- ManualPreset button id from cklickable.lua
|
||
--ExportScript.genericRadioConf[2]['ManualPreset']['ValueManual'] = 0.2-- ManualPreset Manual value from cklickable.lua
|
||
--ExportScript.genericRadioConf[2]['ManualPreset']['ValuePreset'] = 0.3-- ManualPreset Preset value from cklickable.lua
|
||
|
||
ExportScript.genericRadioConf[3] = {} -- secound radio
|
||
ExportScript.genericRadioConf[3]['Name'] = "FM Radio" -- name of radio
|
||
ExportScript.genericRadioConf[3]['DeviceID'] = 28 -- DeviceID for GetDevice from device.lua
|
||
ExportScript.genericRadioConf[3]['setFrequency'] = true -- change frequency active
|
||
ExportScript.genericRadioConf[3]['FrequencyMultiplicator'] = 1000000 -- Multiplicator from Hz to MHz
|
||
ExportScript.genericRadioConf[3]['FrequencyFormat'] = "%7.3f" -- frequency view format LUA style
|
||
ExportScript.genericRadioConf[3]['FrequencyStep'] = 25 -- minimal step for frequency change
|
||
ExportScript.genericRadioConf[3]['minFrequency'] = 30.000 -- lowest frequency
|
||
ExportScript.genericRadioConf[3]['maxFrequency'] = 87.975 -- highest frequency
|
||
ExportScript.genericRadioConf[3]['Power'] = {} -- power button active
|
||
ExportScript.genericRadioConf[3]['Power']['ButtonID'] = 3001 -- power button id from cklickable.lua
|
||
ExportScript.genericRadioConf[3]['Power']['ValueOn'] = 0.25 -- power on value from cklickable.lua
|
||
ExportScript.genericRadioConf[3]['Power']['ValueOff'] = 0.0 -- power off value from cklickable.lua
|
||
--ExportScript.genericRadioConf[3]['Volume'] = {} -- volume knob active
|
||
--ExportScript.genericRadioConf[3]['Volume']['ButtonID'] = 3005 -- volume button id from cklickable.lua
|
||
ExportScript.genericRadioConf[3]['Preset'] = {} -- preset knob active
|
||
ExportScript.genericRadioConf[3]['Preset']['ArgumentID'] = 273 -- ManualPreset argument id from cklickable.lua
|
||
ExportScript.genericRadioConf[3]['Preset']['ButtonID'] = 3002 -- preset button id from cklickable.lua
|
||
--ExportScript.genericRadioConf[3]['Preset']['ButtonID2'] = 3002 -- preset button id from cklickable.lua
|
||
-- Preset based on switchlogic on clickabledata.lua
|
||
-- [273] = "%.3f", -- FM RADIO - Chanel Selector {0.0,0.143,0.286,0.429,0.572,0.715,0.858,1.0} -- laut clickabledata.lua
|
||
ExportScript.genericRadioConf[3]['Preset']['List'] = {[0.0]="1",[0.143]="2",[0.286]="3",[0.429]="4",[0.572]="5",[0.715]="6",[0.858]="0",[1.0]="-"}
|
||
ExportScript.genericRadioConf[3]['Preset']['Step'] = 0.143 -- minimal step for preset change
|
||
--ExportScript.genericRadioConf[3]['Preset']['Step2'] = -0.01 -- minimal step for preset change
|
||
--ExportScript.genericRadioConf[3]['Squelch'] = {} -- squelch switch active
|
||
--ExportScript.genericRadioConf[3]['Squelch']['ArgumentID'] = 148 -- ManualPreset argument id from cklickable.lua
|
||
--ExportScript.genericRadioConf[3]['Squelch']['ButtonID'] = 3008 -- squelch button id from cklickable.lua
|
||
--ExportScript.genericRadioConf[3]['Squelch']['ValueOn'] = 0.0 -- squelch on value from cklickable.lua
|
||
--ExportScript.genericRadioConf[3]['Squelch']['ValueOff'] = -1.0 -- squelch off value from cklickable.lua
|
||
--ExportScript.genericRadioConf[3]['Load'] = {} -- load button preset
|
||
--ExportScript.genericRadioConf[3]['Load']['ButtonID'] = 3004 -- load button id from cklickable.lua
|
||
--ExportScript.genericRadioConf[3]['ManualPreset'] = {} -- switch manual or preset active
|
||
--ExportScript.genericRadioConf[3]['ManualPreset']['ArgumentID'] = 149 -- ManualPreset argument id from cklickable.lua
|
||
--ExportScript.genericRadioConf[3]['ManualPreset']['ButtonID'] = 3004 -- ManualPreset button id from cklickable.lua
|
||
--ExportScript.genericRadioConf[3]['ManualPreset']['ValueManual'] = 0.2-- ManualPreset Manual value from cklickable.lua
|
||
--ExportScript.genericRadioConf[3]['ManualPreset']['ValuePreset'] = 0.3-- ManualPreset Preset value from cklickable.lua
|
||
|
||
ExportScript.genericRadio(nil, nil)
|
||
|
||
--=====================================================================================
|
||
--[[
|
||
ExportScript.Tools.WriteToLog('list_cockpit_params(): '..ExportScript.Tools.dump(list_cockpit_params()))
|
||
ExportScript.Tools.WriteToLog('CMSP: '..ExportScript.Tools.dump(list_indication(7)))
|
||
|
||
-- list_indication get tehe value of cockpit displays
|
||
local ltmp1 = 0
|
||
for ltmp2 = 0, 20, 1 do
|
||
ltmp1 = list_indication(ltmp2)
|
||
ExportScript.Tools.WriteToLog(ltmp2..': '..ExportScript.Tools.dump(ltmp1))
|
||
end
|
||
]]
|
||
--[[
|
||
-- getmetatable get function name from devices
|
||
local ltmp1 = 0
|
||
for ltmp2 = 1, 70, 1 do
|
||
ltmp1 = GetDevice(ltmp2)
|
||
ExportScript.Tools.WriteToLog(ltmp2..': '..ExportScript.Tools.dump(ltmp1))
|
||
ExportScript.Tools.WriteToLog(ltmp2..' (metatable): '..ExportScript.Tools.dump(getmetatable(ltmp1)))
|
||
end
|
||
]]
|
||
end
|
||
|
||
-----------------------------
|
||
-- Custom functions --
|
||
----------------------------- |