mirror of
https://github.com/weyne85/DCS-ExportScripts.git
synced 2025-10-29 16:58:18 +00:00
1282 lines
69 KiB
Lua
1282 lines
69 KiB
Lua
-- Mi-8MTV2 Export
|
|
-- Version 1.0.0 BETA
|
|
|
|
ExportScript.FoundDCSModule = true
|
|
|
|
ExportScript.ConfigEveryFrameArguments =
|
|
{
|
|
--[[
|
|
every frames arguments
|
|
based of "mainpanel_init.lua"
|
|
Example (http://www.lua.org/manual/5.1/manual.html#pdf-string.format)
|
|
[DeviceID] = "Format"
|
|
[4] = "%.4f", <- floating-point number with 4 digits after point
|
|
[19] = "%0.1f", <- floating-point number with 1 digit after point
|
|
[129] = "%1d", <- decimal number
|
|
[5] = "%.f", <- floating point number rounded to a decimal number
|
|
]]
|
|
|
|
-- CONTROLLERS
|
|
---------------------------------------------------------------
|
|
----[209] = "%.4f", -- rudder { -1, 1}
|
|
--[266] = "%.4f", -- rudder_add { 1, -1}
|
|
--[181] = "%.4f", -- stick_roll {1, -1}
|
|
--[180] = "%.4f", -- stick_pitch {1, -1}
|
|
--[191] = "%.4f", -- collective_position {0, 1}
|
|
--[192] = "%1d", -- correction_position {1, 0}
|
|
--[230] = "%1d", -- collective_position_operator {0, 1}
|
|
--[231] = "%1d", -- correction_position_operator {1, 0}
|
|
--[560] = "%1d", -- coll_ROUTE_DESCENT_sw {0, 1}
|
|
--[558] = "%1d", -- coll_ReadjustFreeTurbRPM_sw {0, 1}
|
|
----[208] = "%1d", -- collective_stopper {0, 1}
|
|
--[187] = "%.4f", -- left_engine_throttle {0.0, 1.0}
|
|
--[189] = "%.4f", -- right_engine_throttle {0.0, 1.0}
|
|
--[881] = "%.4f", -- wheelBrakes {0.0, 1.0}
|
|
----[579] = "", -- throttle_cover {0.0, 1.0}
|
|
----[208] = "", -- rotor_brake_handle {0.0, 1.0}
|
|
-- Left main panel
|
|
---------------------------------------------------------------
|
|
[16] = "%.2f", -- Variometer_L {-30, -20, -10, -5, -2, -1, 0, 1, 2, 5, 10, 20, 30} {-1.0, -0.71, -0.43, -0.23, -0.09, -0.05, 0, 0.05, 0.09, 0.23, 0.43, 0.71, 1.0}
|
|
[95] = "%.2f", -- Variometer_R {-30, -20, -10, -5, -2, -1, 0, 1, 2, 5, 10, 20, 30} {-1.0, -0.71, -0.43, -0.23, -0.09, -0.05, 0, 0.05, 0.09, 0.23, 0.43, 0.71, 1.0}
|
|
[24] = "%.3f", -- IAS_L {-10.0, 0.0, 13.889, 27.78, 41.67, 55.56, 69.44, 83.33, 111.1, 125.0, 129.2} {0.0, 0.001, 0.028, 0.165, 0.277, 0.393, 1.0}
|
|
[790] = "%.3f", -- IAS_R {-10.0, 0.0, 13.889, 27.78, 41.67, 55.56, 69.44, 83.33, 111.1, 125.0, 129.2} {0.0, 0.001, 0.028, 0.165, 0.277, 0.393, 1.0}
|
|
-- AGB-3k
|
|
---------------------------------------------------------------
|
|
[13] = "%.4f", -- AGB_3K_Left_roll {-1.0, 1.0}
|
|
[12] = "%.4f", -- AGB_3K_Left_pitch {1.0, -1.0}
|
|
[14] = "%.4f", -- AGB_3K_Left_failure_flag {0.0, 1.0}
|
|
[15] = "%.4f", -- AGB_3K_Left_sideslip {1.0, -1.0}
|
|
[820] = "%.4f", -- AGB_3K_Left_index {0.5, -0.5}
|
|
------
|
|
[92] = "%.4f", -- AGB_3K_Right_roll {-1.0, 1.0}
|
|
[91] = "%.4f", -- AGB_3K_Right_pitch {1.0, -1.0}
|
|
[93] = "%.4f", -- AGB_3K_Right_failure_flag {0.0, 1.0}
|
|
[94] = "%.4f", -- AGB_3K_Right_sideslip {1.0, -1.0}
|
|
[821] = "%.4f", -- AGB_3K_Right_index {0.5, -0.5}
|
|
-- EUP-53
|
|
---------------------------------------------------------------
|
|
[22] = "%.4f", -- EUP_speed {-1.0, 1.0}
|
|
[23] = "%.4f", -- EUP_sideslip {-1.0, 1.0}
|
|
-- UGR-4K
|
|
---------------------------------------------------------------
|
|
[25] = "%.4f", -- UGR_4K_heading_L {0.0, 1.0}
|
|
[27] = "%.4f", -- UGR_4K_commanded_course_L {0.0, 1.0}
|
|
[28] = "%.4f", -- UGR_4K_bearing_needle_L {0.0, 1.0}
|
|
----
|
|
[101] = "%.4f", -- UGR_4K_heading_R {0.0, 1.0}
|
|
[103] = "%.4f", -- UGR_4K_commanded_course_R {0.0, 1.0}
|
|
[104] = "%.4f", -- UGR_4K_bearing_needle_R {0.0, 1.0}
|
|
-- Barometric altimeter VD-10K
|
|
---------------------------------------------------------------
|
|
[19] = "%.4f", -- VD_10K_L_100 {0.0, 1.0}
|
|
[20] = "%.4f", -- VD_10K_L_10 {0.0, 1.0}
|
|
[833] = "%.4f", -- VD_10K_L_100_Ind {0.0, 1.0}
|
|
[832] = "%.4f", -- VD_10K_L_10_Ind {0.0, 1.0}
|
|
[916] = "%.4f", -- VD_10K_L_Shutter {0.822, 0.75}
|
|
[21] = "%.4f", -- VD_10K_L_PRESS {0.0, 1.0}
|
|
-----
|
|
[98] = "%.4f", -- VD_10K_R_100 {0.0, 1.0}
|
|
[99] = "%.4f", -- VD_10K_R_10 {0.0, 1.0}
|
|
[835] = "%.4f", -- VD_10K_R_100_Ind {0.0, 1.0}
|
|
[917] = "%.4f", -- VD_10K_R_Shutter {0.822, 0.75}
|
|
[834] = "%.4f", -- VD_10K_R_10_Ind {0.0, 1.0}
|
|
[100] = "%.4f", -- VD_10K_R_PRESS {0.0, 1.0}
|
|
-- Rotor RPM
|
|
---------------------------------------------------------------
|
|
[42] = "%.4f", -- RotorRPM {0.0, 1.0}
|
|
[787] = "%.4f", -- RotorRPM_Oper {0.0, 1.0}
|
|
-- Rotor Pitch
|
|
---------------------------------------------------------------
|
|
[36] = "%.2f", -- RotorPitch {1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0, 12.0, 13.0, 14.0, 15.0} {0.0, 0.07, 0.14, 0.21, 0.29, 0.35, 0.43, 0.5, 0.57, 0.64, 0.71, 0.79, 0.86, 0.93, 1.0}
|
|
-- Radar altimeter A-036
|
|
---------------------------------------------------------------
|
|
[34] = "%.3f", -- A_036_RALT {0, 100, 300, 800} {0.0, 0.475, 0.625, 1.0}
|
|
[31] = "%.3f", -- A_036_DangerRALT_index {0, 100, 300, 800} {0.0, 0.475, 0.625, 1.0}
|
|
[30] = "%.f", -- A_036_DangerRALT_lamp {0.0, 1.0}
|
|
[33] = "%.1f", -- A_036_warning_flag {0.0, 1.0}
|
|
-- Engines RPM
|
|
---------------------------------------------------------------
|
|
[40] = "%.4f", -- LeftEngineRPM {0.0, 110.0} {0.0, 1.0}
|
|
[41] = "%.4f", -- RightEngineRPM {0.0, 110.0} {0.0, 1.0}
|
|
[788] = "%.4f", -- LeftEngineRPM_Oper {0.0, 110.0} {0.0, 1.0}
|
|
[789] = "%.4f", -- RightEngineRPM_Oper {0.0, 110.0} {0.0, 1.0}
|
|
-- Engines temperature
|
|
---------------------------------------------------------------
|
|
[43] = "%.4f", -- LeftEngineTemperatureHund {0.0, 1200.0} {0.0, 1.0}
|
|
[44] = "%.4f", -- LeftEngineTemperatureTenth {0.0, 100.0} {0.0, 1.0}
|
|
[45] = "%.4f", -- RightEngineTemperatureHund {0.0, 1200.0} {0.0, 1.0}
|
|
[46] = "%.4f", -- RightEngineTemperatureTenth {0.0, 100.0} {0.0, 1.0}
|
|
-- Engines mode indicator
|
|
---------------------------------------------------------------
|
|
[39] = "%.4f", -- EnginesMode {0.0, 1.0}
|
|
[37] = "%.4f", -- LeftEngineMode {0.0, 1.0}
|
|
[38] = "%.4f", -- RightEngineMode {0.0, 1.0}
|
|
-- Engines brakes
|
|
---------------------------------------------------------------
|
|
[204] = "%.1f", -- left_engine_brake_handle {0.0, 1.0}
|
|
[206] = "%.1f", -- right_engine_brake_handle {0.0, 1.0}
|
|
[203] = "%.1f", -- left_engine_brake_handle_holder {0.0, 1.0}
|
|
[205] = "%.1f", -- right_engine_brake_handle_holder {0.0, 1.0}
|
|
-- DISS 15
|
|
---------------------------------------------------------------
|
|
[830] = "%.4f", -- diss15_hover_x {-1.0, 0, 1.0}
|
|
[828] = "%.4f", -- diss15_hover_y {-1.0, 1.0}
|
|
[829] = "%.4f", -- diss15_hover_z {-1.0, 1.0}
|
|
[831] = "%.4f", -- diss15_hover_lamp_off {0.0, 0.9}
|
|
----
|
|
[791] = "%.4f", -- diss15_drift_angle {-1.0, 1.0}
|
|
----
|
|
[795] = "%.4f", -- diss15_W_shutter {0.0, 1.0}
|
|
[796] = "%.1f", -- diss15_W_memory_lamp {1.0, 0.0}
|
|
[792] = "%.4f", -- diss15_W_hundreds {0.0, 1.0}
|
|
[793] = "%.4f", -- diss15_W_tens {0.0, 1.0}
|
|
[794] = "%.4f", -- diss15_W_ones {0.0, 1.0}
|
|
----
|
|
[817] = "%.4f", -- diss15_coord_on_lamp {1.0, 0.0}
|
|
[805] = "%.4f", -- diss15_coord_forward {1.0, 0.0}
|
|
[806] = "%.4f", -- diss15_coord_X_hundreds {0.0, 1.0}
|
|
[807] = "%.4f", -- diss15_coord_X_tens {0.0, 1.0}
|
|
[808] = "%.4f", -- diss15_coord_X_ones {0.0, 1.0}
|
|
[802] = "%.4f", -- diss15_coord_right {0.0, 1.0}
|
|
[799] = "%.4f", -- diss15_coord_Z_hundreds {0.0, 1.0}
|
|
[800] = "%.4f", -- diss15_coord_Z_tens {0.0, 1.0}
|
|
[801] = "%.4f", -- diss15_coord_Z_ones {0.0, 1.0}
|
|
[811] = "%.4f", -- diss15_coord_angle_hundreds {0.0, 1.0}
|
|
[812] = "%.4f", -- diss15_coord_angle_tens {0.0, 1.0}
|
|
[813] = "%.4f", -- diss15_coord_angle_ones {0.0, 1.0}
|
|
[814] = "%.4f", -- diss15_coord_angle_minutes {0.0, 1.0}
|
|
----
|
|
[822] = "%.f", -- diss15_check_control_lamp {0.0, 0.9}
|
|
[823] = "%.f", -- diss15_check_work_lamp {0.0, 0.9}
|
|
[824] = "%.f", -- diss15_check_failM_lamp {0.0, 0.9}
|
|
[825] = "%.f", -- diss15_check_failC_lamp {0.0, 0.9}
|
|
-- Oil
|
|
---------------------------------------------------------------
|
|
[111] = "%.4f", -- oils_p_main_reductor {0.0, 1.0}
|
|
[114] = "%.2f", -- oils_t_main_reductor {0.0, 1.0} {-0.25, 0.75}
|
|
[113] = "%.2f", -- oils_temp_tail_reductor {0.0, 1.0} {-0.25, 0.75}
|
|
[112] = "%.2f", -- oils_temp_intermediate_reductor {0.0, 1.0} {-0.25, 0.75}
|
|
[115] = "%.4f", -- oils_p_left_engine {0.0, 1.0}
|
|
[116] = "%.2f", -- oils_t_left_engine {-0.25, 0.75}
|
|
[117] = "%.4f", -- oils_p_right_engine {0.0, 1.0}
|
|
[118] = "%.2f", -- oils_t_right_engine {-0.25, 0.75}
|
|
-- Autopilot
|
|
---------------------------------------------------------------
|
|
[122] = "%.4f", -- autopilot_yaw_indicator {-1.0, 1.0}
|
|
[124] = "%.4f", -- autopilot_pitch_indicator {-1.0, 1.0}
|
|
[123] = "%.2f", -- autopilot_roll_indicator {-0.33, 0.33}
|
|
[125] = "%.4f", -- autopilot_altitude_indicator {-1.0, 1.0}
|
|
[119] = "%.4f", -- autopilot_yaw_scale {0.0, 1.0}
|
|
[120] = "%.4f", -- autopilot_roll_scale {0.0, 1.0}
|
|
[121] = "%.4f", -- autopilot_pitch_scale {0.0, 1.0}
|
|
-- Center upper panel
|
|
---------------------------------------------------------------
|
|
[404] = "%.2f", -- hydro_pressure_main {0.05, 0.33, 0.52, 0.69, 1.0}
|
|
[405] = "%.2f", -- hydro_pressure_aux {0.05, 0.33, 0.52, 0.69, 1.0}
|
|
[402] = "%.2f", -- APU_temperature {0.0, 0.2, 0.42, 0.69, 0.94, 1.0}
|
|
[403] = "%.2f", -- APU_pressure {0.04, 0.95}
|
|
-- Mechanic clock
|
|
---------------------------------------------------------------
|
|
[49] = "%.4f", -- CLOCK_currtime_hours {0.0, 1.0}
|
|
[50] = "%.4f", -- CLOCK_currtime_minutes {0.0, 1.0}
|
|
[51] = "%.4f", -- CLOCK_currtime_seconds {0.0, 1.0}
|
|
[56] = "%.4f", -- CLOCK_flight_time_meter_status {0.0, 1.0}
|
|
[52] = "%.4f", -- CLOCK_flight_hours {0.0, 1.0}
|
|
[53] = "%.4f", -- CLOCK_flight_minutes {0.0, 1.0}
|
|
[54] = "%.4f", -- CLOCK_seconds_meter_time_minutes {0.0, 1.0}
|
|
[55] = "%.4f", -- CLOCK_seconds_meter_time_seconds {0.0, 1.0}
|
|
-- Fuel tanks
|
|
---------------------------------------------------------------
|
|
[62] = "%.3f", -- FuelScaleUpper {0.0, 200.0, 400.0, 800.0, 1600.0, 2000.0, 2400.0, 2800.0} {0.0, 0.131, 0.244, 0.414, 0.647, 0.705, 0.9, 1.0}
|
|
[62] = "%.3f", -- FuelScaleLower {0.0, 200.0, 300.0, 400.0, 600.0, 1200.0, 2240.0} {0.0, 0.165, 0.283, 0.393, 0.618, 1.0}
|
|
-- Air system gauges
|
|
---------------------------------------------------------------
|
|
[320] = "%.2f", -- air_system_pressure {0.0, 25.0, 50.0, 100.0} {0.0, 0.23, 0.48, 1.0}
|
|
[321] = "%.4f", -- air_system_brake_pressure {0.0, 1.0}
|
|
-- SPUU-52
|
|
---------------------------------------------------------------
|
|
[126] = "%.4f", -- SPUU_pointer {-1.0, 1.0}
|
|
[786] = "%.f", -- SPUU52_lamp {0.0, 1.0}
|
|
-- PU-26 LAMP
|
|
---------------------------------------------------------------
|
|
[827] = "%.f", -- PU_26_GA_Lamp {0.0, 1.0} {0.0, 0.5}
|
|
-- ARC-UD
|
|
---------------------------------------------------------------
|
|
[458] = "%.f", -- ARC_UD_Narrow_Lamp {0.0, 0.9}
|
|
[459] = "%.f", -- ARC_UD_Wide_Lamp {0.0, 0.9}
|
|
[460] = "%.f", -- ARC_UD_Pulse_Lamp {0.0, 0.9}
|
|
-- ARC-9
|
|
---------------------------------------------------------------
|
|
[681] = "%.4f", -- ARC_9_Signal {0.0, 1.0}
|
|
----
|
|
[857] = "%.4f", -- PKV_Reflector {0.0, 1.0}
|
|
----
|
|
[778] = "%.4f", -- SAFE_WEAP {0.0, 1.0}
|
|
----
|
|
[577] = "%.4f", -- AMMO_CNT1_1 {0.0, 1.0}
|
|
[578] = "%.4f", -- AMMO_CNT1_2 {0.0, 1.0}
|
|
[580] = "%.4f", -- AMMO_CNT2_1 {0.0, 1.0}
|
|
[581] = "%.4f", -- AMMO_CNT2_2 {0.0, 1.0}
|
|
[583] = "%.4f", -- AMMO_CNT3_1 {0.0, 1.0}
|
|
[584] = "%.4f", -- AMMO_CNT3_2 {0.0, 1.0}
|
|
-- Radio R-828
|
|
---------------------------------------------------------------
|
|
[740] = "%.2f", -- R828_ASU {0.0, 1.0} {0.0, 0.95}
|
|
[736] = "%.3f", -- R828_channel {0, 1, 2, 3, 4, 5, 6, 7, 8, 9} {0.0, 0.101, 0.199, 0.302, 0.400, 0.502, 0.601, 0.697, 0.801, 0.898}
|
|
-- Damage
|
|
---------------------------------------------------------------
|
|
--[215] = "%0.1f", -- Blister_LEFT {0.0, 1.0} {0.0, 0.8}
|
|
--[216] = "%0.1f", -- Blister_RIGHT {0.0, 1.0} {0.0, 0.8}
|
|
----
|
|
--[878] = "%.1f", -- WindShiels_Up {0.0, 1.0}
|
|
--[879] = "%.1f", -- WindShiels_Down {0.0, 1.0}
|
|
-- UV-26
|
|
---------------------------------------------------------------
|
|
--[892] = "%.1f", -- UV26_Left {0.0, 1.0}
|
|
--[891] = "%.1f", -- UV26_Right {0.0, 1.0}
|
|
-- Pilots
|
|
---------------------------------------------------------------
|
|
--[245] = "%.1f", -- Pilot_Body {0.0, 1.0}
|
|
--[242] = "%.1f", -- Operator_Body {0.0, 1.0}
|
|
--[262] = "%.1f", -- Crew_Body {0.0, 1.0}
|
|
-- Damage
|
|
---------------------------------------------------------------
|
|
--[876] = "%.1f", -- Upper_Windshield {0.0, 1.0}
|
|
--[877] = "%.1f", -- Down_Windshield {0.0, 1.0}
|
|
--[879] = "%.1f", -- Left_Windshield {0.0, 1.0}
|
|
--[878] = "%.1f", -- Right_Windshield {0.0, 1.0}
|
|
-- Jadro 1A
|
|
---------------------------------------------------------------
|
|
[849] = "%.f", -- Jadro_ASU_Lamp {0.0, 1.0}
|
|
[848] = "%.f", -- Jadro_Ctl_Lamp {0.0, 1.0}
|
|
[850] = "%.f", -- Jadro_Breakdown_Lamp {0.0, 1.0}
|
|
----
|
|
[904] = "%.4f", -- RAM_Temp {-50.0, 0.0, 70.0} {-1.0, 0.0, 1.0}
|
|
----
|
|
[907] = "%.4f", -- G_Meter {-1.0, 1.0, 3.0} {-1.0, 0.343, 1.0}
|
|
[908] = "%.4f", -- G_Meter_Max {1.0, 3.0} {0.343, 1.0}
|
|
[909] = "%.4f", -- G_Meter_Min {-1.0, 1.0} {-1.0, 0.343}
|
|
----
|
|
[903] = "%1d", -- filter_handle {0,1}
|
|
----
|
|
[63] = "%.4f", -- SalonTemperature {-70.0, -60.0, -30.0, -20.0, -10.0, 0.0, 10.0, 20.0, 30.0, 60.0, 70.0} {-0.7, -0.593, -0.296, -0.227, -0.125, 0.003, 0.132, 0.233, 0.302, 0.603, 0.693}
|
|
-- electric system gauges
|
|
---------------------------------------------------------------
|
|
[526] = "%.4f", -- DC_voltage {0.0, 30.0} {0.0, 1.0}
|
|
[532] = "%.2f", -- AC_voltage {0.0, 100.0, 150.0, 200.0, 250.0} {0.0, 0.14, 0.31, 0.56, 1.0}
|
|
[493] = "%.4f", -- DC_APU_current {0.0, 400.0} {0.0, 1.0}
|
|
[527] = "%.4f", -- DC_battery_I_current {0.0, 400.0} {0.0, 1.0}
|
|
[528] = "%.4f", -- DC_battery_II_current {0.0, 400.0} {0.0, 1.0}
|
|
[529] = "%.4f", -- DC_VU_I_current {0.0, 400.0} {0.0, 1.0}
|
|
[530] = "%.4f", -- DC_VU_II_current {0.0, 400.0} {0.0, 1.0}
|
|
[531] = "%.4f", -- DC_VU_III_current {0.0, 400.0} {0.0, 1.0}
|
|
[533] = "%.2f", -- AC_generator_I_current {0.0, 50, 70, 90, 120, 130, 140, 150} {0.0, 0.1, 0.2, 0.36, 0.63, 0.75, 0.86, 1.0}
|
|
[534] = "%.2f", -- AC_generator_II_current {0.0, 50, 70, 90, 120, 130, 140, 150} {0.0, 0.1, 0.2, 0.36, 0.63, 0.75, 0.86, 1.0}
|
|
[371] = "%.2f", -- AntiIce_ampermeter {0.0, 50, 70, 90, 120, 130, 140, 150} {0.0, 0.1, 0.2, 0.36, 0.63, 0.75, 0.86, 1.0}
|
|
-- LAMPS
|
|
---------------------------------------------------------------
|
|
[781] = "%.f", -- lamp_AP_heading_on
|
|
[782] = "%.f", -- lamp_AP_heading_off
|
|
[783] = "%.f", -- lamp_AP_pitch_roll_on
|
|
[784] = "%.f", -- lamp_AP_height_on
|
|
[785] = "%.f", -- lamp_AP_height_off
|
|
[316] = "%.f", -- lamp_ENGINE_RT_LEFT_ON
|
|
[317] = "%.f", -- lamp_ENGINE_RT_RIGHT_ON
|
|
[318] = "%.f", -- lamp_SARPP_ON
|
|
[325] = "%.f", -- lamp_Descent_Siren
|
|
[326] = "%.f", -- lamp_LOCK_OPEN
|
|
[327] = "%.f", -- lamp_DOORS_OPEN
|
|
[340] = "%.f", -- lamp_TURN_ON_RI_65
|
|
[360] = "%.f", -- lamp_FROST
|
|
[362] = "%.f", -- lamp_LEFT_ENG_HEATING
|
|
[363] = "%.f", -- lamp_RIGHT_ENG_HEATING
|
|
[361] = "%.f", -- lamp_ANTI_ICE_ON
|
|
[364] = "%.f", -- lamp_LEFT_PZU_FRONT
|
|
[365] = "%.f", -- lamp_RIGHT_PZU_FRONT
|
|
[366] = "%.f", -- lamp_LEFT_PZU_BACK
|
|
[367] = "%.f", -- lamp_RIGHT_PZU_BACK
|
|
[373] = "%.f", -- lamp_SECTION_1
|
|
[375] = "%.f", -- lamp_SECTION_2
|
|
[374] = "%.f", -- lamp_SECTION_3
|
|
[376] = "%.f", -- lamp_SECTION_4
|
|
[368] = "%.f", -- lamp_RIO_heating_ok
|
|
[377] = "%.f", -- lamp_LEFT_ENG_FIRE
|
|
[378] = "%.f", -- lamp_RIGHT_ENG_FIRE
|
|
[379] = "%.f", -- lamp_KO50_FIRE
|
|
[380] = "%.f", -- lamp_REDUC_AI9_FIRE
|
|
[381] = "%.f", -- lamp_FIRE_LENG_1_QUEUE
|
|
[382] = "%.f", -- lamp_FIRE_RENG_1_QUEUE
|
|
[383] = "%.f", -- lamp_FIRE_KO50_1_QUEUE
|
|
[384] = "%.f", -- lamp_FIRE_REDUCT_1_QUEUE
|
|
[385] = "%.f", -- lamp_FIRE_LENG_2_QUEUE
|
|
[386] = "%.f", -- lamp_FIRE_RENG_2_QUEUE
|
|
[387] = "%.f", -- lamp_FIRE_KO50_2_QUEUE
|
|
[388] = "%.f", -- lamp_FIRE_REDUCT_2_QUEUE
|
|
[398] = "%.f", -- lamp_CHECK_SENSORS
|
|
[407] = "%.f", -- lamp_HYDRO_main_on
|
|
[408] = "%.f", -- lamp_HYDRO_aux_on
|
|
[414] = "%.f", -- lamp_APD9_on
|
|
[416] = "%.f", -- lamp_APD9_oil_pressure
|
|
[417] = "%.f", -- lamp_APD9_rpm
|
|
[418] = "%.f", -- lamp_APD9_rpm_high
|
|
[420] = "%.f", -- lamp_APD_on
|
|
[424] = "%.f", -- lamp_APD_starter_on
|
|
[434] = "%.f", -- lamp_FUEL_left_closed
|
|
[435] = "%.f", -- lamp_FUEL_right_closed
|
|
[436] = "%.f", -- lamp_FUEL_ring_closed
|
|
[441] = "%.f", -- lamp_FUEL_center_on
|
|
[442] = "%.f", -- lamp_FUEL_left_on
|
|
[443] = "%.f", -- lamp_FUEL_right_on
|
|
[461] = "%.f", -- lamp_HEATER
|
|
[462] = "%.f", -- lamp_IGNITION
|
|
[463] = "%.f", -- lamp_KO50_ON
|
|
[341] = "%.f", -- lamp_LEFT_PITOT_HEATER_OK
|
|
[490] = "%.f", -- lamp_RIGHT_PITOT_HEATER_OK
|
|
[509] = "%.f", -- lamp_LEFT_PZU_ON
|
|
[510] = "%.f", -- lamp_RIGHT_PZU_ON
|
|
[504] = "%.f", -- lamp_ELEC_turn_VU1
|
|
[505] = "%.f", -- lamp_ELEC_turn_VU2
|
|
[506] = "%.f", -- lamp_ELEC_turn_VU3
|
|
[507] = "%.f", -- lamp_ELEC_DC_ground
|
|
[508] = "%.f", -- lamp_ELEC_test_equipment
|
|
[543] = "%.f", -- lamp_ELEC_gen1_fail
|
|
[544] = "%.f", -- lamp_ELEC_gen2_fail
|
|
[545] = "%.f", -- lamp_ELEC_AC_ground
|
|
[546] = "%.f", -- lamp_ELEC_PO_500
|
|
[86] = "%.f", -- lamp_CIRCUIT_FROM_BATTERY
|
|
[68] = "%.f", -- lamp_CLOG_TF_LEFT
|
|
[69] = "%.f", -- lamp_CLOG_TF_RIGHT
|
|
[70] = "%.f", -- lamp_CHIP_LEFT_ENG
|
|
[71] = "%.f", -- lamp_CHIP_RIGHT_ENG
|
|
[72] = "%.f", -- lamp_VIBRATION_LEFT_HIGH
|
|
[73] = "%.f", -- lamp_VIBRATION_RIGHT_HIGH
|
|
[74] = "%.f", -- lamp_FIRE
|
|
[76] = "%.f", -- lamp_LEFT_ENG_TURN_OFF
|
|
[77] = "%.f", -- lamp_RIGHT_ENG_TURN_OFF
|
|
[78] = "%.f", -- lamp_FT_LEFT_HIGH
|
|
[79] = "%.f", -- lamp_FT_RIGHT_HIGH
|
|
[80] = "%.f", -- lamp_OIL_PRESSURE_LEFT
|
|
[81] = "%.f", -- lamp_OIL_PRESSURE_RIGHT
|
|
[82] = "%.f", -- lamp_ER_LEFT
|
|
[83] = "%.f", -- lamp_ER_RIGHT
|
|
[84] = "%.f", -- lamp_EEC_LEFT_OFF
|
|
[85] = "%.f", -- lamp_EEC_RIGHT_OFF
|
|
[873] = "%.f", -- lamp_CHIP_MAIN_REDUCTOR
|
|
[874] = "%.f", -- lamp_CHIP_INTER_REDUCTOR
|
|
[875] = "%.f", -- lamp_CHIP_TAIL_REDUCTOR
|
|
[64] = "%.f", -- lamp_300_Left
|
|
[65] = "%.f", -- lamp_DISS_OFF
|
|
[555] = "%.f", -- lamp_BD1
|
|
[556] = "%.f", -- lamp_BD2
|
|
[557] = "%.f", -- lamp_BD3
|
|
[558] = "%.f", -- lamp_BD4
|
|
[559] = "%.f", -- lamp_BD5
|
|
[560] = "%.f", -- lamp_BD6
|
|
[711] = "%.f", -- lamp_BD1Bomb
|
|
[712] = "%.f", -- lamp_BD2Bomb
|
|
[713] = "%.f", -- lamp_BD3Bomb
|
|
[714] = "%.f", -- lamp_BD4Bomb
|
|
[715] = "%.f", -- lamp_BD5Bomb
|
|
[716] = "%.f", -- lamp_BD6Bomb
|
|
[562] = "%.f", -- lamp_PUS1
|
|
[563] = "%.f", -- lamp_PUS3
|
|
[564] = "%.f", -- lamp_PUS4
|
|
[565] = "%.f", -- lamp_PUS6
|
|
[561] = "%.f", -- lamp_EmergExplode
|
|
[705] = "%.f", -- lamp_EmergExplodeSec
|
|
[710] = "%.f", -- lamp_BV_Net_On
|
|
[566] = "%.f", -- lamp_RS_Net_On
|
|
[567] = "%.f", -- lamp_GUV_Net_On
|
|
--[] = "%.f", -- lamp_MV_Net_On
|
|
[568] = "%.f", -- lamp_FKP_On
|
|
[778] = "%.f", -- lamp_Caution_Weap
|
|
--[] = "%.f", -- lamp_LeftSignal
|
|
--[] = "%.f", -- lamp_RightSignal
|
|
[586] = "%.f", -- lamp_Caution_Weap1
|
|
[587] = "%.f", -- lamp_Caution_Weap2
|
|
[588] = "%.f", -- lamp_Caution_Weap3
|
|
[306] = "%.f", -- lamp_Record_P503B
|
|
[302] = "%.f", -- lamp_IFF_KD
|
|
[303] = "%.f", -- lamp_IFF_KP
|
|
[912] = "%.f", -- lamp_IFF_TurnOnReserve
|
|
[87] = "%.f", -- lamp_IFF_Failure
|
|
-- Lights system
|
|
---------------------------------------------------------------
|
|
[880] = "%.f", -- RedLightLhGr1 {1.0, 0.0}
|
|
[896] = "%.f", -- RedLightLhGr2 {1.0, 0.0}
|
|
[897] = "%.f", -- RedLightRhGr1 {1.0, 0.0}
|
|
[898] = "%.f", -- RedLightRhGr2 {1.0, 0.0}
|
|
[899] = "%.f", -- RedLightChGr1 {1.0, 0.0}
|
|
[901] = "%.f", -- RedLightChGr2 {1.0, 0.0}
|
|
[922] = "%.f", -- RedLightChGr12 {1.0, 0.0}
|
|
[902] = "%.f", -- RedLight5V5 {1.0, 0.0}
|
|
[900] = "%.f", -- PlafondBrightness {1.0, 0.0}
|
|
[547] = "%.f", -- LeftPlafond {1.0, 0.0}
|
|
[665] = "%.f", -- RightPlafond {1.0, 0.0}
|
|
[920] = "%.f" -- RecorderP503B_PanelLightness {1.0, 0.0}
|
|
}
|
|
ExportScript.ConfigArguments =
|
|
{
|
|
--[[
|
|
arguments for export in low tick interval
|
|
based on "clickabledata.lua"
|
|
]]
|
|
-- ELEC_INTERFACE
|
|
--[536] = "%.1f", -- PTR-EEP-LVR-ADJV1 (AC Voltage 1 set rotary) {-1, 1}
|
|
--[537] = "%.1f", -- PTR-EEP-LVR-ADJV2 (AC Voltage 2 set rotary) {-1, 1}
|
|
[538] = "%1d", --PTR-EEP-TMB-GEN1 (Generator 1)
|
|
[539] = "%1d", --PTR-EEP-TMB-GEN2 (Generator 2)
|
|
[540] = "%1d", --PTR-EEP-TMB-AER (AC ground power)
|
|
[541] = "%1d", --PTR-EEP-TMB-PO (115V Inverter)
|
|
[542] = "%1d", --PTR-EEP-TMB-PT (36V Inverter)
|
|
[535] = "%.1f", --PTR-EEP-LVR-MODE (AC Mode), 11 degrees
|
|
[494] = "%.1f", --PTR-RSPE-LVR-FEEDMODE (DC Bus Selector), 8 degrees
|
|
|
|
[495] = "%1d", --PTR-RSPE-TMB-AKK1 (Battery 1)
|
|
[496] = "%1d", --PTR-RSPE-TMB-AKK2 (Battery 2)
|
|
[497] = "%1d", --PTR-RSPE-TMB-RESGEN (Standby Generator)
|
|
--[498] = "%.1f", -- PTR-RSPE-LVR-V (DC Voltage set rotary) {-1, 1}
|
|
[499] = "%1d", --PTR-RSPE-TMB-RECT1 (Rectifier 1)
|
|
[500] = "%1d", --PTR-RSPE-TMB-RECT2 (Rectifier 2)
|
|
[501] = "%1d", --PTR-RSPE-TMB-RECT3 (Rectifier 3)
|
|
[502] = "%1d", --PTR-RSPE-TMB-AERF (DC ground power)
|
|
[503] = "%1d", --PTR-RSPE-TMB-TESTEQU (Equipment Test)
|
|
|
|
[147] = "%1d", --PTR-APP-CVR-CIRC (Standby Rectifier Cover)
|
|
[148] = "%1d", --PTR-APP-TMB-CIRC (Standby Rectifier)
|
|
[149] = "%1d", --PTR-APP-TMB-TRNS (36V Transformer)
|
|
|
|
[498] = "%.4f", --PTR-RSPE-LVR-V (Standby Generator Voltage Adjustment Rheostat)
|
|
[536] = "%.4f", --PTR-EEP-LVR-ADJV1 (Generator 1 Voltage Adjustment Rheostat)
|
|
[537] = "%.4f", --PTR-EEP-LVR-ADJV2 (Generator 2 Voltage Adjustment Rheostat)
|
|
[522] = "%.4f", --PTR-RSPE-TMB-WRMAKK (Battery Heating Switch, ON/OFF)
|
|
|
|
[590] = "%1d", --PTR-LAZS-TMB-BV-ZSBR (BW ESBR)
|
|
[591] = "%1d", --PTR-LAZS-TMB-BV-EXP (Explode)
|
|
[592] = "%1d", --PTR-LAZS-TMB-BV-DIR (Control)
|
|
[593] = "%1d", --PTR-LAZS-TMB-BV-EQU (Equipment)
|
|
[594] = "%1d", --PTR-LAZS-TMB-RSGUV-FIRE (RS/GUV Fire)
|
|
[595] = "%1d", --PTR-LAZS-TMB-RSGUV-SIGN (RS/GUV Warning)
|
|
[596] = "%1d", --PTR-LAZS-TMB-RSGUV-WARM (ESBR Heating)
|
|
|
|
[597] = "%1d", --PTR-LAZS-TMB-311 (GUV Out 800 Left)
|
|
[598] = "%1d", --PTR-LAZS-TMB-GUOUT-800L (GUV Out 800 Left)
|
|
[599] = "%1d", --PTR-LAZS-TMB-GUOUT-800R (GUV Out 800 Right)
|
|
[600] = "%1d", --PTR-LAZS-TMB-GUOUTL-622L (GUV In Left 622 Left)
|
|
[601] = "%1d", --PTR-LAZS-TMB-GUOUTL-622R (GUV In Left 622 Right)
|
|
[602] = "%1d", --PTR-LAZS-TMB-GUOUTR-622L (GUV In Right 622 Left)
|
|
[603] = "%1d", --PTR-LAZS-TMB-GUOUTR-622R (GUV In Rignt 622 Right)
|
|
|
|
[604] = "%1d", --PTR-LAZS-TMB-ES-800L (Electric Launch 800 Left)
|
|
[605] = "%1d", --PTR-LAZS-TMB-ES-622R (Electric Launch 800 Right)
|
|
[606] = "%1d", --PTR-LAZS-TMB-PKT (PKT)
|
|
[607] = "%1d", --PTR-LAZS-TMB-JETBOMB (Emergency Jettison)
|
|
[608] = "%1d", --PTR-LAZS-TMB-JETPWR (Power Jettison)
|
|
[609] = "%1d", --PTR-LAZS-TMB-JETEXPL (Emergency Jettison)
|
|
[610] = "%1d", --PTR-LAZS-TMB-JETRCKT (Alarm rockets)
|
|
|
|
[611] = "%1d", --PTR-RAZS-TMB-START-TRBON (CB APU start)
|
|
[612] = "%1d", --PTR-RAZS-TMB-START-TRBIGN (CB APU ignition)
|
|
[613] = "%1d", --PTR-RAZS-TMB-START-ENGON (CB Engine start)
|
|
[614] = "%1d", --PTR-RAZS-TMB-START-ENGIGN (CB Engine ignition)
|
|
[615] = "%1d", --PTR-RAZS-TMB-RPM (CB RPM CONTROL)
|
|
[616] = "%1d", --PTR-NONAME (CB NONAME)
|
|
[617] = "%1d", --PTR-SW-LOCKER-BASE (CB Lock Opening Control Main)
|
|
[618] = "%1d", --PTR-SW-LOCKER-RES (CB Lock Opening Control Reserve)
|
|
[619] = "%1d", --PTR-RAZS-TMB-TURN (CB TURN INDICATOR)
|
|
|
|
[629] = "%1d", --PTR-RAZS-TMB-TSCOCK-ON (CB Bypass)
|
|
[630] = "%1d", --PTR-RAZS-TMB-TSCOCK-L (CB Left valve)
|
|
[631] = "%1d", --PTR-RAZS-TMB-TSCOCK-R (CB Right valve)
|
|
[632] = "%1d", --PTR-RAZS-TMB-TSCOUNT (CB Fuelmeter)
|
|
[633] = "%1d", --PTR-RAZS-TMB-TSPMP-C (CB Center tank)
|
|
[634] = "%1d", --PTR-RAZS-TMB-TSPMP-L (CB Left pump)
|
|
[635] = "%1d", --PTR-RAZS-TMB-TSPMP-R (CB Right pump)
|
|
[636] = "%1d", --PTR-RAZS-TMB-T819 (CB T-819)
|
|
[637] = "%1d", --PTR-RAZS-TMB-SPPU52 (CB SPUU-52)
|
|
|
|
[647] = "%1d", --PTR-RAZS-TMB-HLGT-DIR-L (SPOT CONTROL LEFT)
|
|
[648] = "%1d", --PTR-RAZS-TMB-HLGT-ON-L (SPOT ON LEFT)
|
|
[649] = "%1d", --PTR-RAZS-TMB-HLGT-DIR-R (SPOT CONTROL RIGHT)
|
|
[650] = "%1d", --PTR-RAZS-TMB-HLGT-ON-R (SPOT ON RIGHT)
|
|
[651] = "%1d", --PTR-RAZS-TMB-ANO (ANO)
|
|
[652] = "%1d", --PTR-RAZS-TMB-WNGLGT (WING LIGHTS)
|
|
[653] = "%1d", --PTR-RAZS-TMB-LAMPTEST (CHECK LAMPS/FLASHER)
|
|
--[654] = "%1d", -- PTR-RAZS-TMB-DIRMAIN (LOCK MAIN)
|
|
--[655] = "%1d", -- PTR-RAZS-TMB-DIRDUB (LOCK SPARE)
|
|
[918] = "%1d", --PTR-SW-LIGHT-PRF4-LEFT (CB PRF-4 Light Left)
|
|
[919] = "%1d", --PTR-SW-LIGHT-PRF4-RIGHT (CB PRF-4 Light Right)
|
|
|
|
[620] = "%1d", --PTR-RAZS-TMB-APMAIN (CB Autopilot MAIN)
|
|
[621] = "%1d", --PTR-RAZS-TMB-APFRICT (CB Autopilot Frict)
|
|
[622] = "%1d", --PTR-RAZS-TMB-APELCT (CB Autopilot Clutch)
|
|
[623] = "%1d", --PTR-RAZS-TMB-GSMAIN (CB Hydro Main)
|
|
[624] = "%1d", --PTR-RAZS-TMB-GSDBL (CB Hydro Aux)
|
|
[625] = "%1d", --PTR-RAZS-TMB-RADSPU (CB SPU (Intercom))
|
|
[626] = "%1d", --PTR-RAZS-TMB-RADALT (CB Radio Altimeter)
|
|
[627] = "%1d", --PTR-RAZS-TMB-RADCOMM (CB Command Radio Station (R-863))
|
|
[628] = "%1d", --PTR-RAZS-TMB-RADRS (CB 6201)
|
|
|
|
[638] = "%1d", --PTR-RAZS-TMB-PPSSIGN (CB Signalization)
|
|
[639] = "%1d", --PTR-RAZS-TMB-PPSQUE1-L (CB 1 Queue Left)
|
|
[640] = "%1d", --PTR-RAZS-TMB-PPSQUE1-R (CB 1 Queue Right)
|
|
[641] = "%1d", --PTR-RAZS-TMB-PPSQUE2-L (CB 2 Queue Left)
|
|
[642] = "%1d", --PTR-RAZS-TMB-PPSQUE2-R (CB 2 Queue Right)
|
|
[643] = "%1d", --PTR-RAZS-TMB-RADCMP-SV (CB Radio Compass MW(ARC-9))
|
|
[644] = "%1d", --PTR-RAZS-TMB-RADCMP-UKV (CB Radio Compass VHF(ARC-UD))
|
|
[645] = "%1d", --PTR-RAZS-TMB-RADDISS (CB Doppler Navigator)
|
|
[646] = "%1d", --PTR-RAZS-TMB-RADRNTG (CB Radio Meter)
|
|
|
|
[656] = "%1d", --PTR-RAZS-TMB-POSDIR (CONTROL)
|
|
[657] = "%1d", --PTR-RAZS-TMB-POSPZUENG-L (LEFT ENGINE)
|
|
[658] = "%1d", --PTR-RAZS-TMB-POSPZUENG-R (RIGHT ENGINE)
|
|
[659] = "%1d", --PTR-RAZS-TMB-POSRIO3 (RIO-3)
|
|
[660] = "%1d", --PTR-RAZS-TMB-POSGLS (WINDOW)
|
|
[661] = "%1d", --PTR-RAZS-TMB-WIPER-L (LEFT ENGINE)
|
|
[662] = "%1d", --PTR-RAZS-TMB-WIPER-R (RIGHT ENGINE)
|
|
[663] = "%1d", --PTR-RAZS-TMB-L1800 (RIO-3)
|
|
[664] = "%1d", --PTR-RAZS-TMB-KO50 (WINDOW)
|
|
|
|
[882] = "%1d", --PTR-GRAZS-1 (CB Group 1)
|
|
[883] = "%1d", --PTR-GRAZS-2 (CB Group 4)
|
|
[884] = "%1d", --PTR-GRAZS-3 (CB Group 7)
|
|
[885] = "%1d", --PTR-GRAZS-4 (CB Group 2)
|
|
[886] = "%1d", --PTR-GRAZS-5 (CB Group 5)
|
|
[887] = "%1d", --PTR-GRAZS-6 (CB Group 8)
|
|
[888] = "%1d", --PTR-GRAZS-7 (CB Group 3)
|
|
[889] = "%1d", --PTR-GRAZS-8 (CB Group 6)
|
|
[890] = "%1d", --PTR-GRAZS-9 (CB Group 9)
|
|
-------------------------------------------------------------
|
|
-- FUELSYS INTERFACE
|
|
[438] = "%1d", --PTR-CPE-TMB-PUMP-RATE (Service tank pump)
|
|
[439] = "%1d", --PTR-CPE-TMB-PUMPTNK-L (Left fuel tank pump)
|
|
[440] = "%1d", --PTR-CPE-TMB-PUMPTNK-R (Right fuel tank pump)
|
|
[427] = "%1d", --PTR-CPE-TMB-PUMP-L (Left Engine Shutoff Valve)
|
|
[429] = "%1d", --PTR-CPE-TMB-PUMP-R (Right Engine Shutoff Valve)
|
|
[426] = "%1d", --PTR-CPE-CVR-PUMP-L (Left Engine Shutoff Valve Cover)
|
|
[428] = "%1d", --PTR-CPE-CVR-PUMP-R (Right Engine Shutoff Valve Cover)
|
|
[431] = "%1d", --PTR-CPE-TMB-PUMP-RING (Crossfeed)
|
|
[430] = "%1d", --PTR-CPE-CVR-PUMP-RING (Crossfeed Cover)
|
|
|
|
[433] = "%1d", --PTR-CPE-TMB-PUMP-PASS (Bypass)
|
|
[432] = "%1d", --PTR-CPE-CVR-PUMP-PASS (Bypass Cover)
|
|
[437] = "%.1f", --PTR-CPE-TMB-PUMP-CONTR (Refueling Control Switch)
|
|
-------------------------------------------------------------
|
|
-- ENGINE INTERFACE
|
|
[412] = "%1d", --PTR-CPE-TMB-TURBOSTART-ST (APU start mode)
|
|
[413] = "%1d", --PTR-CPE-BTN-TURBOSTART-ON (APU start)
|
|
[415] = "%1d", --PTR-CPE-BTN-TURBOSTART-OFF (APU stop)
|
|
|
|
[419] = "%1d", --PTR-CPE-BTN-ENGSTART-ON (Engine start ON)
|
|
[421] = "%1d", --PTR-CPE-BTN-ENGSTART-OFF (Engine start OFF)
|
|
[422] = "%1d", --PTR-CPE-TMB-ENGSTART-LFTRGT (Select engine)
|
|
[423] = "%1d", --PTR-CPE-TMB-ENGSTART-ROLL (Engine start mode)
|
|
[425] = "%1d", -- PTR-CPE-BTN-ENGSTART-TEST (Engine ignition check)
|
|
|
|
[204] = "%1d", --PTR-ENGSTOP-ARM-L (Left engine stop)
|
|
[206] = "%1d", --PTR-ENGSTOP-ARM-R (Right engine stop)
|
|
[208] = "%1d", --PTR-VINTBRAKE-ARM (Rotor brake)
|
|
|
|
[310] = "%1d", --PTR-LSPE-BTN-CONTR-IV500 (Vibration Sensor Test)
|
|
[311] = "%1d", --PTR-LSPE-BTN-CONTR-GRND (Temperature Sensor Test Cold)
|
|
[312] = "%1d", --PTR-LSPE-BTN-CONTR-AIR (Temperature Sensor Test Hot)
|
|
[313] = "%1d", --PTR-LSPE-BTN-CONTR-RTL (Temperature Regulator Test Left)
|
|
[314] = "%1d", --PTR-LSPE-BTN-CONTR-RTR (Temperature Regulator Test Right)
|
|
|
|
[202] = "%1d", --PTR-STKSGR-TMB-RPM-LEFT
|
|
[867] = "%1d", --PTR-STKSGR-TMB-RPM-RIGHT
|
|
--[0] = "%.4f", --PTR-STKSEC-ARM-L (Left Engine Throttle)
|
|
--[0] = "%.4f", --PTR-STKSEC-ARM-R (Right Engine Throttle)
|
|
--[0] = "%.4f", --PKT-TROTTLE_L (Left Collective / Throttle)
|
|
--[0] = "%.4f", --PKT-TROTTLE_R (Right Collective / Throttle)
|
|
|
|
[167] = "%1d", --PTR-APP-TMB-ERD-L (EEC Left)
|
|
[173] = "%1d", --PTR-APP-TMB-ERD-R (EEC Right)
|
|
[168] = "%1d", --PTR-APP-TMB-CHR-L (ER Left)
|
|
[172] = "%1d", --PTR-APP-TMB-CHR-R (ER Right)
|
|
[169] = "%1d", --PTR-APP-TMB-ST-L (FT Check Left)
|
|
[171] = "%1d", --PTR-APP-TMB-ST-R (FT Check Right)
|
|
[170] = "%1d", --PTR-APP-TMB-TKLR (CT check)
|
|
-------------------------------------------------------------
|
|
-- HYDRO SYS INTERFACE
|
|
[406] = "%1d", --PTR-CPE-TMB-HYDRO-MAIN (Main Hydro)
|
|
[410] = "%1d", --PTR-CPE-TMB-HYDRO-DBL (Aux Hydro)
|
|
[409] = "%1d", --PTR-CPE-CVR-HYDRO-DBL (Aux Hydro Cover)
|
|
[411] = "%1d", --PTR-CPE-BTN-DBLOFF (Aux Hydro Off)
|
|
-------------------------------------------------------------
|
|
-- AUTOPILOT
|
|
[134] = "%1d", --PTR-APP-BTN-DIRON (Autopilot Heading ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Button
|
|
[868] = "%.4f", --PTR-APP-BTN-DIRON (Autopilot Heading ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Axis
|
|
[135] = "%1d", --PTR-APP-BTN-DIROFF (Autopilot Heading OFF/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Button
|
|
[869] = "%.4f", --PTR-APP-BTN-DIROFF (Autopilot Heading OFF/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Axis
|
|
|
|
[138] = "%1d", --PTR-APP-BTN-KTON (Autopilot Pitch/Roll ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Button
|
|
[870] = "%.4f", --PTR-APP-BTN-KTON (Autopilot Pitch/Roll ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Axis
|
|
[144] = "%1d", --PTR-APP-BTN-ALTON (Autopilot Altitude ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Button
|
|
[871] = "%.4f", --PTR-APP-BTN-ALTON (Autopilot Altitude ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Axis
|
|
[145] = "%1d", --PTR-APP-BTN-ALTOFF (Autopilot Altitude OFF/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Button
|
|
[872] = "%.4f", --PTR-APP-BTN-ALTOFF (Autopilot Altitude OFF/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Axis
|
|
|
|
[146] = "%1d", --PTR-APP-BTN-CONTR (Autopilot Altitude Channel Control)
|
|
|
|
[136] = "%.4f", --PTR-APP-LVR-DIR (Autopilot Heading Adjustment)
|
|
[140] = "%.4f", --PTR-APP-LVR-K (Autopilot Roll Adjustment)
|
|
[142] = "%.4f", --PTR-APP-LVR-T (Autopilot Pitch Adjustment)
|
|
|
|
[183] = "%1d", --PTR-AUTOPILOT-OFF-L (Autopilot Off Left Button)
|
|
[226] = "%1d", --PTR-AUTOPILOT-OFF-R (Autopilot Off Right Button)
|
|
-------------------------------------------------------------
|
|
-- RADAR ALTIMETER
|
|
[32] = "%1d", --PTR-ALTR-LVR-TEST (Radio altimeter test)
|
|
[29] = "%.4f", --PTR-ALTR-LVR-SET (Dangerous RALT set rotary) {0, 1}
|
|
[35] = "%1d", --PTR-ALTR-TMB-ONOFF (Radar Altimeter Power)
|
|
-------------------------------------------------------------
|
|
-- BAR ALTIMETER
|
|
[18] = "%.4f", --PTR-ALTB-LVR-SET (Baro pressure QFE knob)
|
|
[97] = "%.4f", --PTR-ALTB-LVR-SET-R (Baro pressure QFE knob)
|
|
-------------------------------------------------------------
|
|
-- VARIOMETER
|
|
[17] = "%.4f", --PTR-VARIO-LVR-SET-L (Variometer adjustment knob)
|
|
[96] = "%.4f", --PTR-VARIO-LVR-SET-R (Variometer adjustment knob)
|
|
-------------------------------------------------------------
|
|
--HSI
|
|
[26] = "%.4f", --PTR-PNP-LVR-SET (HSI Course set knob)
|
|
[858] = "%1d", --PTR-ARKSV-ARKUKV (HSI ARC-9/ARC-UD Select)
|
|
|
|
[102] = "%.4f", --PTR-PNP-LVR-SET-R (HSI Course set knob)
|
|
-------------------------------------------------------------
|
|
-- FUELSYS INTERFACE
|
|
[61] = "%.1f", --PTR-FUEL-LVR-MODE (Fuel meter switch)
|
|
-------------------------------------------------------------
|
|
-- WEAPON SYS
|
|
[921] = "%1d", --PTR-SAFE-WEAPON (Weapon Safe-Armed)
|
|
[707] = "%1d", --PTR-ADDPBV-TMB-EMRGEXP (Emergency Explode)
|
|
[706] = "%1d", --PTR-ADDPBV-CVR-EMRGEXP (Emergency Explode Cover)
|
|
|
|
[709] = "%1d", --PTR-ADDPBV-TMB-EMRGJET (Emergency Release)
|
|
[708] = "%1d", --PTR-ADDPBV-CVR-EMRGJET (Emergency Release Cover)
|
|
|
|
[717] = "%1d", --PTR-ADDPBV-TMB-MAINOFF (Main Bombs)
|
|
[718] = "%1d", --PTR-ADDPBV-BTN-LAMPTEST (Lamps Check)
|
|
|
|
[719] = "%.1f", --PTR-ADDPBV-LVR-MODE (Pod Variants)
|
|
[720] = "%1d", --PTR-ADDPBV-TMB-WARM (ESBR Heat)
|
|
|
|
[730] = "%.4f", --PTR-ADDESBR-LVR-MODE (ESBR Position)
|
|
[731] = "%1d", --PTR-ADDESBR-LVR-ONOFF (ESBR On/Off)
|
|
|
|
[570] = "%1d", --PTR-LAZS-TMB-EMRGEXP (Emergency Explode)
|
|
[572] = "%1d", --PTR-LAZS-TMB-EMRGJET (Emergency Release)
|
|
[569] = "%1d", --PTR-LAZS-CVR-EMRGEXP (Emergency Explode Cover)
|
|
[571] = "%1d", --PTR-LAZS-CVR-EMRGJET (Emergency Release Cover)
|
|
|
|
--[573] = "%1d", -- PTR-LAZS-TMB-MAINOFF (Main On/Off)
|
|
[575] = "%1d", --PTR-LAZS-TMB-RSGUV (RS/GUV Selector)
|
|
[576] = "%1d", --PTR-LAZS-BTN-LAMPTEST (Lamps Check)
|
|
[574] = "%1d", --PTR-LAZS-BTN-ENTER (PUS Arming)
|
|
|
|
[342] = "%1d", --PTR-LPE-TMB-SHOOT1 (8/16/4)
|
|
[343] = "%1d", --PTR-LPE-TMB-SHOOT2 (1256/AUTO/34)
|
|
[344] = "%1d", --PTR-LPE-TMB-RS (UPK/PKT/RS)
|
|
[345] = "%1d", --PTR-LPE-TMB-GUV (CUTOFF)
|
|
[349] = "%1d", --PTR-LAZS-TMB-MAINOFF05 (800_or_624_622_800)
|
|
[348] = "%1d", --PTR-LAZS-CVR-EMRGEXP01 (800 or 624_622_800 Cover)
|
|
|
|
[347] = "%.4f", --PTR-LPE-TMB-VAR (In800Out/800inOr624/622)
|
|
|
|
[346] = "%.4f", --PTR-LPE-LVR-SHELL (Burst length)
|
|
|
|
[350] = "%.4f", --PTR-LPE-TMB-PYRO-L (PYROCARTRIDGE Left)
|
|
[351] = "%.4f", --PTR-LPE-TMB-PYRO-R (PYROCARTRIDGE Right)
|
|
|
|
[573] = "%1d", --PTR-LAZS-TMB-MAINOFF (Mine Arms Main Switch)
|
|
[905] = "%1d", --PTR-RSPE-TMB-PKT (PKT Selector Switch)
|
|
-------------------------------------------------------------
|
|
-- SYS CONTROLLER
|
|
[523] = "%1d", --PTR-RSPE-TMB-WINK (FLASHER)
|
|
[525] = "%1d", --PTR-RSPE-TMB-TAB (Transparent Day/Night)
|
|
[150] = "%1d", --PTR-APP-TMB-TEST (CHECK LAMPS/FLASHER)
|
|
-------------------------------------------------------------
|
|
-- SPUU-52
|
|
[332] = "%1d", --PTR-LES-TMB-SPPU52 (SPUU-52 Power)
|
|
[127] = "%1d", --PTR-APP-BTN-OFF (SPUU-52 Control Engage)
|
|
[129] = "%1d", --PTR-APP-TMB-RT (SPUU-52 Control (Left button - P. Right button - t))
|
|
[128] = "%.4f", --PTR-APP-LVR-ADJ (SPUU 52 Control Adjustment)
|
|
-------------------------------------------------------------
|
|
-- FIRE EXTING INTERFACE
|
|
[389] = "%1d", --PTR-CPE-BTN-QUE1-1 (Main Discharge L ENG)
|
|
[390] = "%1d", --PTR-CPE-BTN-QUE1-2 (Main Discharge R ENG)
|
|
[391] = "%1d", --PTR-CPE-BTN-QUE1-3 (Main Discharge KO-50)
|
|
[392] = "%1d", --PTR-CPE-BTN-QUE1-4 (Main Discharge APU GEAR)
|
|
[393] = "%1d", --PTR-CPE-BTN-QUE2-1 (Alternate Discharge L ENG)
|
|
[394] = "%1d", --PTR-CPE-BTN-QUE2-2 (Alternate Discharge R ENG)
|
|
[395] = "%1d", --PTR-CPE-BTN-QUE2-3 (Alternate Discharge KO-50)
|
|
[396] = "%1d", --PTR-CPE-BTN-QUE2-4 (Alternate Discharge APU GEAR)
|
|
[397] = "%1d", --PTR-CPE-BTN-FIRE-OFF (Turn Off Fire Signal)
|
|
|
|
[399] = "%1d", --PTR-CPE-TMB-CONTR-FIRE (Fire Detector Test)
|
|
[400] = "%1d", --PTR-CPE-TMB-CONTR-PYRO (Squib Test)
|
|
[401] = "%.1f", --PTR-CPE-LVR-CONTR-MODE (Check Fire circuits)
|
|
-------------------------------------------------------------
|
|
-- ENGINE INTERFACE
|
|
[353] = "%1d", --PTR-LPE-TMB-MANAUT (AUTO-MANUAL)
|
|
[354] = "%1d", --PTR-LPE-BTN-OVR (GENERAL OFF)
|
|
[355] = "%1d", --PTR-LPE-TMB-PZU-L (LEFT ENGINE)
|
|
[356] = "%1d", --PTR-LPE-TMB-PZU-R (RIGHT ENGINE)
|
|
[357] = "%1d", --PTR-LPE-TMB-GLASS (WINDOW)
|
|
[358] = "%1d", --PTR-LPE-TMB-RIO (Ice Detector Heater)
|
|
[359] = "%1d", --PTR-LPE-BTN-RIOCONTR (Ice Detector Heater Test)
|
|
[372] = "%.1f", --PTR-LPE-LVR-FEEDMODE (Anti Ice Sections Current)
|
|
|
|
[519] = "%1d", --PTR-RSPE-TMB-WRMPVD-L (Left Pitot Heater)
|
|
[520] = "%1d", --PTR-RSPE-TMB-WRMPVD-R (Right Pitot Heater)
|
|
[339] = "%1d", --PTR-LES-BTN-CONTRPVD (Left Pitot Heater Control)
|
|
[482] = "%1d", --PTR-LES-BTN-CONTRPVD01 (Right Pitot Heater Control)
|
|
-------------------------------------------------------------
|
|
-- DISS 15
|
|
[483] = "%1d", --PTR-RES-TMB-DISS (Doppler Navigator, Power)
|
|
[818] = "%1d", --PTR-DISS-BTN-OFF (Turn Off Coordinates Calculator)
|
|
[819] = "%1d", --PTR-DISS-BTN-ON (Turn On Coordinates Calculator)
|
|
[815] = "%1d", --PTR-DISS-BTN-MINUS (Decrease Map Angle)
|
|
[816] = "%1d", --PTR-DISS-BTN-PLUS (Increase Map Angle)
|
|
[809] = "%1d", --PTR-DISS-BTN-N (Decrease Path KM)
|
|
[810] = "%1d", --PTR-DISS-BTN-V (Increase Path KM)
|
|
[803] = "%1d", --PTR-DISS-BTN-TOLE (Decrease Deviation KM)
|
|
[804] = "%1d", --PTR-DISS-BTN-TORI (Increase Deviation KM)
|
|
[826] = "%.1f", --PTR-IND-DISS-SELECTOR (Mode Switch)
|
|
[797] = "%1d", --PTR-DISS-SELECTOR-KR (Test/Work)
|
|
[798] = "%1d", --PTR-DISS-SELECTOR-SM (Land/Sea)
|
|
-------------------------------------------------------------
|
|
-- ADI
|
|
[487] = "%1d", --PTR-RES-TMB-AG (Right Attitude Indicator Power)
|
|
[335] = "%1d", --PTR-LES-TMB-AG (Left Attitude Indicator Power)
|
|
[11] = "%1d", --PTR-AGB-LVR-KNOB (Left Attitude Indicator Cage)
|
|
[10] = "%.4f", --PTR-AGB-LVR-SET (Left Attitude Indicator Zero pitch trim)
|
|
[90] = "%1d", --PTR-AGB-LVR-KNOB-R (Right Attitude Indicator Cage)
|
|
[89] = "%.4f", --PTR-AGB-LVR-SET-R (Right Attitude Indicator Zero pitch trim)
|
|
-------------------------------------------------------------
|
|
--
|
|
[336] = "%1d", --PTR-LES-TMB-VK53 (VK-53, Power)
|
|
-------------------------------------------------------------
|
|
-- GMK1A
|
|
[485] = "%1d", --PTR-RES-TMB-GMK (GMC Power)
|
|
[470] = "%1d", --PTR-RPE-LVR-CRDNS (GMC Hemisphere Selection)
|
|
[472] = "%1d", --PTR-RPE-LVR-CRDMK (GMC Mode (MC, DG, AC(N/F)))
|
|
[476] = "%.1f", --PTR-RPE-LVR-CRDCONTR (GMC Control (Left - 0, Right - 300)) {-1.0,0.0,1.0}
|
|
[477] = "%.1f", --PTR-RPE-LVR-CRDZK (GMC Course Setting (Left - CCW, Right - CW)) {-1.0,0.0,1.0}
|
|
[474] = "%.4f", --PTR-RPE-LVR-CRDLAT (GMC Latitude Selection)
|
|
-------------------------------------------------------------
|
|
-- ENGINE INTERFACE
|
|
[517] = "%1d", --PTR-RSPE-TMB-PZUENG-L (Dust Protection Left)
|
|
[518] = "%1d", --PTR-RSPE-TMB-PZUENG-R (Dust Protection Right)
|
|
-------------------------------------------------------------
|
|
-- Nav Lights System
|
|
[513] = "%1d", --PTR-RSPE-TMB-ANO (ANO)
|
|
[514] = "%1d", --PTR-RSPE-TMB-LGTWING (Formation Lights)
|
|
[515] = "%1d", --PTR-RSPE-TMB-LGTCONT (Tip Lights)
|
|
[516] = "%1d", --PTR-RSPE-TMB-BEAC (Strobe Light)
|
|
[322] = "%1d", --PTR-LSPE-TMB-AIR-CODE (ANO code)
|
|
[836] = "%1d", --PTR-LEFT-TAXI-L-SW (Taxi Light)
|
|
[837] = "%1d", --PTR-LEFT-TAXI-L-POS-SW (Left Landing Light)
|
|
[838] = "%1d", --PTR-LEFT-TAXI-R-POS-SW (Right Landing Light)
|
|
-------------------------------------------------------------
|
|
-- Lights System
|
|
[333] = "%1d", --PTR-LES-TMB-PLF (Left Ceiling Light)
|
|
[489] = "%1d", --PTR-RES-TMB-PLF (Right Ceiling Light)
|
|
[479] = "%1d", --PTR-RES-TMB-LGT (5.5V Lights)
|
|
[280] = "%.4f", --PTR-LSPE-LVR-REDGRP1 (Lh RedLights Brightness Rst gr.1) {0.0, 1.0}
|
|
[281] = "%.4f", --PTR-LSPE-LVR-REDGRP2 (Lh RedLights Brightness Rst gr.2) {0.0, 1.0}
|
|
[491] = "%.4f", --PTR-RSPE-LVR-REDGRP1 (Rh RedLights Brightness Rst gr.1) {0.0, 1.0}
|
|
[492] = "%.4f", --PTR-RSPE-LVR-REDGRP2 (Rh RedLights Brightness Rst gr.2) {0.0, 1.0}
|
|
[894] = "%.4f", --PTR-RSPE-LVR-REDGRP003 (Central RedLights Brightness Rst gr.1) {0.0, 1.0}
|
|
[895] = "%.4f", --PTR-RSPE-LVR-REDGRP004 (Central RedLights Brightness Rst gr.2) {0.0, 1.0}
|
|
[914] = "%.4f", --PTR-RSPE-LVR-REDGRP005 (5.5V Lights Brightness Rheostat)
|
|
[511] = "%1d", --PTR-RSPE-TMB-DUTY (Cargo Cabin Duty Lights Switc)
|
|
[512] = "%1d", --PTR-RSPE-TMB-ALL (Cargo Cabin Common Lights Switch)
|
|
-------------------------------------------------
|
|
-- RADIO EQUIPMENT
|
|
-- SPU-7
|
|
-- Left
|
|
[549] = "%.4f", --PTR-LAZS-LVR-ALL (Common Volume)
|
|
[548] = "%.4f", --PTR-LAZS-LVR-AUDIT (Listening Volume)
|
|
[553] = "%1d", --PTR-LAZS-TMB-RADSPU (Radio/ICS)
|
|
[551] = "%1d", --PTR-LAZS-TMB-CIRC (Network 1/2 (N/F))
|
|
[552] = "%1d", --PTR-LAZS-BTN-CB (Circular Call (N/F))
|
|
[550] = "%.1f", --PTR-LAZS-LVR-MODES (Radio Source (R-863/JADRO-1A/R-828/NF/ARC-9/ARC-UD))
|
|
-- Right
|
|
[841] = "%.4f", --PTR-RAZS-LVR-ALL002 (Common Volume)
|
|
[840] = "%.4f", --PTR-RAZS-LVR-AUDIT002 (Listening Volume)
|
|
[845] = "%1d", --PTR-RAZS-TMB-RADSPU002 (Radio/ICS)
|
|
[843] = "%1d", --PTR-RAZS-TMB-CIRC002 (Network 1/2 (N/F))
|
|
[846] = "%1d", --PTR-RAZS-BTN-CB002 (Circular Call (N/F))
|
|
[842] = "%.1f", --PTR-RAZS-LVR-MODES002 (Radio Source (R-863/JADRO-1A/R-828/NF/ARC-9/ARC-UD))
|
|
|
|
--[194] = "%.4f", -- RADIO/ICS-1-PTR (Radio/ICS)
|
|
[480] = "%1d", --PTR-RES-TMB-LARING (Laryngophone)
|
|
-------------------------------------------------------------
|
|
-- R-863
|
|
[369] = "%1d", --PTR-LPE-TMB-COMAND (R-863, Select FM/AM)
|
|
[132] = "%1d", --PTR-APP-TMB-NU (R-863, Dial/Memory Unit)
|
|
[370] = "%1d", --PTR-LPE-LVR-CHANNEL (R-863, Radio channel selector)
|
|
|
|
[155] = "%1d", --PTR-APP-TMB-PS (R-863, Squelch)
|
|
[156] = "%.4f", --PTR-APP-LVR-LEVEL (R-863, Volume)
|
|
|
|
[163] = "%.4f", --PTR-APP-LVR-SEL1 (R-863, 10MHz rotary) {-0.1, 0.1}
|
|
[164] = "%.4f", --PTR-APP-LVR-SEL2 (R-863, 1MHz rotary) {-0.1, 0.1}
|
|
[165] = "%.4f", --PTR-APP-LVR-SEL3 (R-863, 100kHz rotary) {-0.1, 0.1}
|
|
[166] = "%.4f", --PTR-APP-LVR-SEL4 (R-863, 1kHz rotary) {-0.1, 0.1}
|
|
|
|
[153] = "%1d", --PTR-APP-TMB-AP (R-863, Emergency Receiver On/Off (N/F))
|
|
[154] = "%1d", --PTR-APP-TMB-RK (R-863, ARC (N/F))
|
|
-------------------------------------------------------------
|
|
-- R-828
|
|
[735] = "%1d", --PTR-ADDSECPLT-LVR-CHNL (R-828 Radio channel selector)
|
|
|
|
[737] = "%.4f", --PTR-ADDSECPLT-LVR-VOL (R-828 Radio volume)
|
|
[738] = "%1d", --PTR-ADDSECPLT-BTN-ASU (R-828 Radio Tuner button)
|
|
[739] = "%1d", --PTR-ADDSECPLT-TMB-PSH (R-828 Radio Squelch)
|
|
[756] = "%1d", --PTR-ADDSECPLT-TMB-P828 (R-828 Radio, Power)
|
|
[757] = "%1d", --PTR-ADDSECPLT-TMB-MODSEL (R-828 Radio, COMM/NAV)
|
|
-------------------------------------------------------------
|
|
-- Jadro-1A
|
|
[484] = "%1d", --PTR-RES-TMB-RS (Jadro 1A, Power)
|
|
[745] = "%.4f", --PTR-ADDSECPLT-LVR-DIG12 (Jadro 1A, Frequency Selector, 1MHz) {-0.1, 0.1}
|
|
[746] = "%.4f", --PTR-ADDSECPLT-LVR-DIG3 (Jadro 1A, Frequency Selector, 100kHz) {-0.1, 0.1}
|
|
[747] = "%.4f", --PTR-ADDSECPLT-LVR-DIG4 (Jadro 1A, Frequency Selector, 10kHz) {-0.1, 0.1}
|
|
|
|
[748] = "%.4f", --PTR-ADDSECPLT-LVR-DIG6 (Jadro 1A, Frequency Selector, Left mouse - 1kHz/ Right mouse - 100Hz)
|
|
[749] = "%.4f", --PTR-ADDSECPLT-LVR-DIG6 (Jadro 1A, Frequency Selector, Left mouse - 1kHz/ Right mouse - 100Hz)
|
|
|
|
[744] = "%.1f", --PTR-ADDSECPLT-LVR-ONOFF (Jadro 1A, Mode OFF/OM/AM)
|
|
|
|
[743] = "%.4f", --PTR-ADDSECPLT-LVR-VOLUM (Jadro 1A, Volume)
|
|
[741] = "%.4f", --PTR-ADDSECPLT-LVR-PSH (Jadro 1A, Squelch)
|
|
[742] = "%1d", --PTR-ADDSECPLT-TMB-CONTR (Jadro 1A, Control)
|
|
-------------------------------------------------------------
|
|
-- RI-65
|
|
[338] = "%1d", --PTR-LES-TMB-RK85 (RI-65)
|
|
[292] = "%1d", --PTR-LSPE-BTN-RI65-OFF (RI-65 OFF)
|
|
[293] = "%1d", --PTR-LSPE-BTN-RI65-RETRY (RI-65 Repeat)
|
|
[294] = "%1d", --PTR-LSPE-BTN-RI65-TEST (RI-65 Check)
|
|
[295] = "%1d", --PTR-LSPE-TMB-RI65-AMP (RI-65 Amplifier)
|
|
-------------------------------------------------------------
|
|
-- ARC-UD
|
|
[456] = "%.1f", --PTR-RPE-LVR-ARKMODE (ARC-UD, Mode OFF/NARROW/WIDE/PULSE/RC)
|
|
[457] = "%.1f", --PTR-RPE-LVR-ARKMODE2 (ARC-UD, Channel)
|
|
|
|
[453] = "%1d", --PTR-RPE-TMB-ARKSENS (ARC-UD, Sensitivity)
|
|
[454] = "%1d", --PTR-RPE-TMB-ARKUKV (ARC-UD, MW/DW)
|
|
|
|
[672] = "%1d", --PTR-RPE-BTN-CONTR (ARC-UD, Control)
|
|
[673] = "%1d", --PTR-RPE-BTN-ANTL (ARC-UD, Ant. Left)
|
|
[674] = "%1d", --PTR-RPE-BTN-ANTR (ARC-UD, Ant. Right)
|
|
|
|
[455] = "%.4f", --PTR-RPE-LVR-ARKVOL (ARC-UD, Volume)
|
|
[481] = "%1d", --PTR-RES-TMB-BLOCK (ARC-UD, Lock Switch)
|
|
-------------------------------------------------------------
|
|
-- PKV Sight
|
|
[589] = "%.4f", --PTR-LAZS-LVR-AIMLGT (Sight Brightness)
|
|
|
|
[855] = "%.4f", --PTR-PKV-ROTARY (Sight Limb)
|
|
|
|
[856] = "%.4f", --PTR-PKV-DOUBLE (Sight Double) {1.0,-1.0}
|
|
|
|
[903] = "%.1f", --PTR-PKV-GLASS-FILTER (PKV Filter)
|
|
--------------------------------------------------------------------------------
|
|
-- CLOCK
|
|
[57] = "%1d", --PTR-WATCH-LVR-L (Mech clock left lever)
|
|
[58] = "%1d", --PTR-WATCH-LVR-L (Mech clock left lever)
|
|
|
|
[59] = "%1d", --PTR-WATCH-LVR-R (Mech clock right lever)
|
|
[60] = "%1d", --PTR-WATCH-LVR-R (Mech clock right lever)
|
|
|
|
[521] = "%1d", --PTR-RSPE-TMB-WRMWTCH (Clock Heating Switch)
|
|
--------------------------------------------------------------------------------
|
|
[839] = "%.1f", --PTR-STAT-PRESS (Static Pressure System Mode (LEFT/COMMON/RIGHT))
|
|
--------------------------------------------------------------------------------
|
|
-- UV-26 CMD Control Panel
|
|
[910] = "%1d", --PTR-UV26-ONOFF (CMD Power)
|
|
[859] = "%1d", --PTR-UV26-BOARD (CMD Select Left/Both/Right board flares dispensers)
|
|
[913] = "%1d", --PTR-UV26-PROG (CMD Amount flares counter/Programming)
|
|
[914] = "%1d", --PTR-L45-BTN (CMD Num of sequences)
|
|
[862] = "%1d", --PTR-L68-BTN (CMD Dispense interval)
|
|
[863] = "%1d", --PTR-L8-BTN (CMD Num in sequence)
|
|
[866] = "%1d", --PTR-START-BTN (CMD Start dispense)
|
|
[911] = "%1d", --PTR-LSPE-BTN-UV26-START (Start/Stop dispense)
|
|
[864] = "%1d", --PTR-RESET-PROG-BTN (CMD Reset to default program)
|
|
[865] = "%1d", --PTR-STOP-BTN (CMD Stop dispense)
|
|
------------------------------------------------
|
|
-- CPTMECH
|
|
[215] = "%1d", --PTR-BLISTER-LOCK-L (Left blister open/close)
|
|
[216] = "%1d", --PTR-BLISTER-LOCK-R (Right blister open/close)
|
|
|
|
[881] = "%1d", --PTR-WHEELBRK-ARM (Wheel Brakes)
|
|
|
|
[910] = "%1d", --PTR-RSPE-TMB-WINK002 (Acceleration Reset)
|
|
|
|
[334] = "%1d", --PTR-LES-TMB-VENT (Left Fan Switch)
|
|
[488] = "%1d", --PTR-RES-TMB-VENT (Right Fan Switch)
|
|
------------------------------------------------
|
|
-- ARC-9
|
|
[469] = "%1d", --PTR-RPE-TMB-NEARFAR (ARC-9, Main/Backup Dialer)
|
|
[448] = "%.4f", --PTR-RPE-LVR-FRQVOLUME (ARC-9, Volume)
|
|
[444] = "%1d", --PTR-RPE-TMB-FRQTLG (ARC-9, TLF/TLG)
|
|
[446] = "%.1f", --PTR-RPE-LVR-FRQMODE (ARC-9, Mode OFF/COMP/ANT/LOOP)
|
|
[447] = "$.1f", --PTR-RPE-TMB-FRQFRAME (ARC-9, Loop Left/Right)
|
|
|
|
[449] = "%.4f", --PTR-RPE-LVR-FRQADJRES (ARC-9, Backup Frequency Tune)
|
|
[675] = "%.2f", --PTR-RPE-LVR-FRQRES-SEC (ARC-9, Backup 100kHz rotary)
|
|
[450] = "%.2f", --PTR-RPE-LVR-FRQRES (ARC-9, Backup 10kHz rotary)
|
|
[451] = "%.4f", --PTR-RPE-LVR-FRQADJMAIN (ARC-9, Main Frequency Tune)
|
|
[678] = "%.2f", --PTR-RPE-LVR-FRQMAIN-SEC (ARC-9, Main 100kHz rotary)
|
|
[452] = "%.2f", --PTR-RPE-LVR-FRQMAIN (ARC-9, Main 10kHz rotary)
|
|
------------------------------------------------
|
|
-- External Cargo Equipment
|
|
[199] = "%1d", --PTR-STKSG-CVR-TACTJET (Tactical Cargo Release Button Cover)
|
|
[200] = "%1d", --PTR-STKSG-BTN-TACTJET (Tactical Cargo Release Button - Push to release)
|
|
[197] = "%1d", --PTR-STKSG-CVR-EMRGJET (Emergency Cargo Release Button Cover)
|
|
[198] = "%1d", --PTR-STKSG-BTN-EMRGJET (Emergency Cargo Release Button - Push to release)
|
|
[324] = "%1d", --PTR-LSPE-TMB-BRK-OUT (External Cargo Automatic Dropping)
|
|
------------------------------------------------
|
|
-- Signal Flares
|
|
[282] = "%1d", --PTR-LSPE-TMB-ALRMRKT1 (Signal Flares Cassette 1 Power Switch)
|
|
[283] = "%1d", --PTR-LSPE-TMB-ALRMRKT2 (Signal Flares Cassette 2 Power Switch)
|
|
[284] = "%1d", --PTR-LSPE-BTN-RCKT11 (Signal Flares Cassette 1 Launch Red Button)
|
|
[285] = "%1d", --PTR-LSPE-BTN-RCKT12 (Signal Flares Cassette 1 Launch Green Button)
|
|
[286] = "%1d", --PTR-LSPE-BTN-RCKT13 (Signal Flares Cassette 1 Launch Yellow Button)
|
|
[287] = "%1d", --PTR-LSPE-BTN-RCKT14 (Signal Flares Cassette 1 Launch White Button)
|
|
[288] = "%1d", --PTR-LSPE-BTN-RCKT21 (Signal Flares Cassette 2 Launch Red Button)
|
|
[289] = "%1d", --PTR-LSPE-BTN-RCKT22 (Signal Flares Cassette 2 Launch Green Button)
|
|
[290] = "%1d", --PTR-LSPE-BTN-RCKT23 (Signal Flares Cassette 2 Launch Yellow Button)
|
|
[291] = "%1d", --PTR-LSPE-BTN-RCKT24 (Signal Flares Cassette 2 Launch White Button)
|
|
------------------------------------------------
|
|
-- SARPP
|
|
[315] = "%1d", --PTR-LSPE-TMB-CONTR-AUTMAN (SARPP-12 Mode Switch,)
|
|
------------------------------------------------
|
|
-- Recorder P-503B
|
|
[305] = "%1d", --PTR-LSPE-TMB-REC (Recorder P-503B Power Switch)
|
|
[308] = "%.4f", --PTR-LSPE-LVR-LGTSEL (Recorder P-503B Backlight Brightness Knob)
|
|
------------------------------------------------
|
|
-- IFF
|
|
[304] = "%1d", --"PTR-LSPE-LVR-MODE (IFF Transponder Mode Selector Switch)
|
|
[301] = "%1d", --PTR-LSPE-TMB-RADIO-WRK (IFF Transponder Device Selector Switch)
|
|
[300] = "%1d", --PTR-LSPE-TMB-RADIO-MODE12 (IFF Transponder Device Mode Switch)
|
|
[296] = "%1d", --PTR-LSPE-CVR-EMRG-ERASE (IFF Transponder Erase Button Cover)
|
|
[297] = "%1d", --PTR-LSPE-BTN-EMRG-ERASE (IFF Transponder Erase Button)
|
|
[298] = "%1d", --PTR-LSPE-CVR-EMRG-MAYDAY (IFF Transponder Disaster Switch Cover)
|
|
[299] = "%1d", --PTR-LSPE-TMB-EMRG-MAYDAY (IFF Transponder Disaster Switch)
|
|
------------------------------------------------
|
|
-- jump descent siren
|
|
[323] = "%1d", --PTR-LSPE-TMB-AIR-SIREN (Alarm Bell Button)
|
|
}
|
|
|
|
-----------------------------
|
|
-- HIGH IMPORTANCE EXPORTS --
|
|
-- done every export event --
|
|
-----------------------------
|
|
|
|
-- Pointed to by ProcessIkarusDCSHighImportance
|
|
function ExportScript.ProcessIkarusDCSConfigHighImportance(mainPanelDevice)
|
|
--[[
|
|
every frame export to Ikarus
|
|
Example from A-10C
|
|
Get Radio Frequencies
|
|
get data from device
|
|
local lUHFRadio = GetDevice(54)
|
|
ExportScript.Tools.SendData("ExportID", "Format")
|
|
ExportScript.Tools.SendData(2000, string.format("%7.3f", lUHFRadio:get_frequency()/1000000)) <- special function for get frequency data
|
|
]]
|
|
end
|
|
|
|
function ExportScript.ProcessDACConfigHighImportance(mainPanelDevice)
|
|
--[[
|
|
every frame export to DAC
|
|
Example from A-10C
|
|
Get Radio Frequencies
|
|
get data from device
|
|
local UHF_RADIO = GetDevice(54)
|
|
ExportScript.Tools.SendDataDAC("ExportID", "Format")
|
|
ExportScript.Tools.SendDataDAC("ExportID", "Format", HardwareConfigID)
|
|
ExportScript.Tools.SendDataDAC("2000", string.format("%7.3f", UHF_RADIO:get_frequency()/1000000))
|
|
ExportScript.Tools.SendDataDAC("2000", string.format("%7.3f", UHF_RADIO:get_frequency()/1000000), 2) -- export to Hardware '2' Config
|
|
]]
|
|
end
|
|
|
|
-----------------------------------------------------
|
|
-- LOW IMPORTANCE EXPORTS --
|
|
-- done every gExportLowTickInterval export events --
|
|
-----------------------------------------------------
|
|
|
|
-- Pointed to by ExportScript.ProcessIkarusDCSConfigLowImportance
|
|
function ExportScript.ProcessIkarusDCSConfigLowImportance(mainPanelDevice)
|
|
--[[
|
|
export in low tick interval to Ikarus
|
|
Example from A-10C
|
|
Get Radio Frequencies
|
|
get data from device
|
|
local lUHFRadio = GetDevice(54)
|
|
ExportScript.Tools.SendData("ExportID", "Format")
|
|
ExportScript.Tools.SendData(2000, string.format("%7.3f", lUHFRadio:get_frequency()/1000000)) <- special function for get frequency data
|
|
]]
|
|
--[[
|
|
-- AGB_3K_LEFT
|
|
local lAGB_3K_LEFT = GetDevice(6)
|
|
ExportScript.Tools.WriteToLog('lAGB_3K_LEFT:get_sideslip '..ExportScript.Tools.dump(lAGB_3K_LEFT:get_sideslip()))
|
|
ExportScript.Tools.WriteToLog('lAGB_3K_LEFT:get_bank '..ExportScript.Tools.dump(lAGB_3K_LEFT:get_bank()))
|
|
ExportScript.Tools.WriteToLog('lAGB_3K_LEFT:get_pitch '..ExportScript.Tools.dump(lAGB_3K_LEFT:get_pitch()))
|
|
|
|
-- AGB_3K_RIGHT
|
|
local lAGB_3K_RIGHT = GetDevice(7)
|
|
ExportScript.Tools.WriteToLog('lAGB_3K_RIGHT:get_sideslip '..ExportScript.Tools.dump(lAGB_3K_RIGHT:get_sideslip()))
|
|
ExportScript.Tools.WriteToLog('lAGB_3K_RIGHT:get_bank '..ExportScript.Tools.dump(lAGB_3K_RIGHT:get_bank()))
|
|
ExportScript.Tools.WriteToLog('lAGB_3K_RIGHT:get_pitch '..ExportScript.Tools.dump(lAGB_3K_RIGHT:get_pitch()))
|
|
|
|
-- DISS_15
|
|
local lDISS_15 = GetDevice(15)
|
|
ExportScript.Tools.WriteToLog('lDISS_15:get_w_vector '..ExportScript.Tools.dump(lDISS_15:get_w_vector()))
|
|
ExportScript.Tools.WriteToLog('lDISS_15:get_drift_angle '..ExportScript.Tools.dump(lDISS_15:get_drift_angle()))
|
|
|
|
-- RADAR_ALTIMETER
|
|
local lRADAR_ALTIMETER = GetDevice(18)
|
|
ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_altitude '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_altitude()))
|
|
ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_dangerous_height_flag '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_dangerous_height_flag()))
|
|
ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_distance_limit '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_distance_limit()))
|
|
ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_dangerous_height '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_dangerous_height()))
|
|
ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_warning_flag '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_warning_flag()))
|
|
ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_mode '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_mode()))
|
|
ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_aperture_size '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_aperture_size()))
|
|
ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_needle_value '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_needle_value()))
|
|
|
|
-- MISC_SYSTEMS_INTERFACE
|
|
local lMISC_SYSTEMS_INTERFACE = GetDevice(20)
|
|
ExportScript.Tools.WriteToLog('lMISC_SYSTEMS_INTERFACE:get_rotor_blades_pitch '..ExportScript.Tools.dump(lMISC_SYSTEMS_INTERFACE:get_rotor_blades_pitch()))
|
|
ExportScript.Tools.WriteToLog('lMISC_SYSTEMS_INTERFACE:get_main_rotor_rpm '..ExportScript.Tools.dump(lMISC_SYSTEMS_INTERFACE:get_main_rotor_rpm()))
|
|
|
|
-- SPU_7 (Intercom)
|
|
local lSPU_7 = GetDevice(36)
|
|
ExportScript.Tools.WriteToLog('lSPU_7:is_communicator_available '..ExportScript.Tools.dump(lSPU_7:is_communicator_available()))
|
|
ExportScript.Tools.WriteToLog('lSPU_7:get_noise_level '..ExportScript.Tools.dump(lSPU_7:get_noise_level()))
|
|
ExportScript.Tools.WriteToLog('lSPU_7:get_signal_level '..ExportScript.Tools.dump(lSPU_7:get_signal_level()))
|
|
--ExportScript.Tools.WriteToLog('lSPU_7:set_communicator '..ExportScript.Tools.dump(lSPU_7:set_communicator())) -- test parameters
|
|
--ExportScript.Tools.WriteToLog('lSPU_7:set_voip_mode '..ExportScript.Tools.dump(lSPU_7:set_voip_mode())) -- test parameters
|
|
|
|
-- JADRO_1A
|
|
local lJADRO_1A = GetDevice(37)
|
|
ExportScript.Tools.WriteToLog('lJADRO_1A:is_on '..ExportScript.Tools.dump(lJADRO_1A:is_on()))
|
|
ExportScript.Tools.WriteToLog('lJADRO_1A:get_frequency '..ExportScript.Tools.dump(lJADRO_1A:get_frequency()))
|
|
--ExportScript.Tools.WriteToLog('lJADRO_1A:set_frequency '..ExportScript.Tools.dump(lJADRO_1A:set_frequency())) -- test parameters
|
|
--ExportScript.Tools.WriteToLog('lJADRO_1A:set_modulation '..ExportScript.Tools.dump(lJADRO_1A:set_modulation())) -- test parameters
|
|
--ExportScript.Tools.WriteToLog('lJADRO_1A:set_channel '..ExportScript.Tools.dump(lJADRO_1A:set_channel())) -- test parameters
|
|
|
|
-- R_863
|
|
local lR_863 = GetDevice(38)
|
|
ExportScript.Tools.WriteToLog('lR_863:is_on '..ExportScript.Tools.dump(lR_863:is_on()))
|
|
ExportScript.Tools.WriteToLog('lR_863:get_frequency '..ExportScript.Tools.dump(lR_863:get_frequency()))
|
|
--ExportScript.Tools.WriteToLog('lR_863:set_frequency '..ExportScript.Tools.dump(lR_863:set_frequency())) -- test parameters
|
|
--ExportScript.Tools.WriteToLog('lR_863:set_modulation '..ExportScript.Tools.dump(lR_863:set_modulation())) -- test parameters
|
|
--ExportScript.Tools.WriteToLog('lR_863:set_channel '..ExportScript.Tools.dump(lR_863:set_channel())) -- test parameters
|
|
|
|
-- R_828
|
|
local lR_828 = GetDevice(39)
|
|
ExportScript.Tools.WriteToLog('lR_828:is_on '..ExportScript.Tools.dump(lR_828:is_on()))
|
|
ExportScript.Tools.WriteToLog('lR_828:get_frequency '..ExportScript.Tools.dump(lR_828:get_frequency()))
|
|
--ExportScript.Tools.WriteToLog('lR_828:set_frequency '..ExportScript.Tools.dump(lR_828:set_frequency())) -- test parameters
|
|
--ExportScript.Tools.WriteToLog('lR_828:set_modulation '..ExportScript.Tools.dump(lR_828:set_modulation())) -- test parameters
|
|
--ExportScript.Tools.WriteToLog('lR_828:set_channel '..ExportScript.Tools.dump(lR_828:set_channel())) -- test parameters
|
|
]]
|
|
end
|
|
|
|
function ExportScript.ProcessDACConfigLowImportance(mainPanelDevice)
|
|
--[[
|
|
export in low tick interval to hardware
|
|
Example from A-10C
|
|
Landing Gear
|
|
mainPanelDevice, basis panel
|
|
ExportScript.Tools.SendDataDAC("2004", mainPanelDevice:get_argument_value(659)) -- GEAR_N_SAFE
|
|
ExportScript.Tools.SendDataDAC("2005", mainPanelDevice:get_argument_value(660)) -- GEAR_L_SAFE
|
|
ExportScript.Tools.SendDataDAC("2006", mainPanelDevice:get_argument_value(661)) -- GEAR_R_SAFE
|
|
|
|
Device test, Device 2 to 32
|
|
is value "userdata", is only DLL intern functions
|
|
|
|
local ltmp1 = 0
|
|
for ltmp2 = 1, 50, 1 do
|
|
ltmp1 = GetDevice(ltmp2)
|
|
ExportScript.Tools.ExportScript.Tools.WriteToLog(ltmp2..': '..ExportScript.Tools.ExportScript.Tools.dump(ltmp1))
|
|
ExportScript.Tools.ExportScript.Tools.WriteToLog(ltmp2..' (metatable): '..ExportScript.Tools.ExportScript.Tools.dump(getmetatable(ltmp1)))
|
|
end
|
|
]]
|
|
|
|
-- Radio comunication
|
|
-- JADRO 1A
|
|
local lJADRO_1A = GetDevice(37)
|
|
if lJADRO_1A:is_on() then
|
|
ExportScript.Tools.SendDataDAC("2000", string.format("%7.4f", lJADRO_1A:get_frequency()/1000000))
|
|
else
|
|
ExportScript.Tools.SendDataDAC("2000", "-")
|
|
end
|
|
|
|
-- R_863 (center)
|
|
local lR_863_c = GetDevice(38)
|
|
ExportScript.Tools.SendDataDAC("2001", string.format("%7.3f", lR_863_c:get_frequency()/1000000))
|
|
|
|
-- R_863 (left) Channel
|
|
local lR_863_l = {[0.0]="1",[0.05]="2",[0.10]="3",[0.15]="4",[0.20]="5",[0.25]="6",[0.30]="7",[0.35]="8",[0.40]="9",[0.45]="10",[0.50]="11",[0.55]="12",[0.60]="13",[0.65]="14",[0.70]="15",[0.75]="16",[0.80]="17",[0.85]="18",[0.90]="19",[0.95]="20"}
|
|
ExportScript.Tools.SendDataDAC("2002", lR_863_l[ExportScript.Tools.round(mainPanelDevice:get_argument_value(370), 2)])
|
|
|
|
-- R_863 (left) Frequency
|
|
-- is the same frequency as R_863 (center), but not the frequency from R_863 (left)
|
|
local lR_863_F = GetDevice(38)
|
|
ExportScript.Tools.SendDataDAC("2003", string.format("%7.3f", lR_863_F:get_frequency()/1000000))
|
|
|
|
-- R_828 Channel
|
|
local lR_828 = {[0.0]="1",[0.101]="2",[0.199]="3",[0.302]="4",[0.400]="5",[0.502]="6",[0.601]="7",[0.697]="8",[0.801]="9",[0.898]="10"}
|
|
ExportScript.Tools.SendDataDAC("2004", lR_828[ExportScript.Tools.round(mainPanelDevice:get_argument_value(736), 3)])
|
|
|
|
-- R_828 Frequency
|
|
local lR_828_F = GetDevice(39)
|
|
if lR_828_F:is_on() then
|
|
ExportScript.Tools.SendDataDAC("2005", string.format("%7.3f", lR_828_F:get_frequency()/1000000))
|
|
else
|
|
ExportScript.Tools.SendDataDAC("2005", "-")
|
|
end
|
|
|
|
-- UV-26
|
|
local lUV26 = list_indication(5)
|
|
lUV26 = lUV26:gsub("-----------------------------------------", "")
|
|
lUV26 = lUV26:gsub("txt_digits", "")
|
|
lUV26 = lUV26:gsub("%c", "")
|
|
|
|
ExportScript.Tools.SendDataDAC("2006", string.format("%s", lUV26))
|
|
|
|
-- generic Radio display and frequency rotarys
|
|
-------------------------------------------------
|
|
-- genericRadioConf
|
|
ExportScript.genericRadioConf = {}
|
|
ExportScript.genericRadioConf['maxRadios'] = 3 -- numbers of aviables/supported radios
|
|
ExportScript.genericRadioConf[1] = {} -- first radio
|
|
ExportScript.genericRadioConf[1]['Name'] = "R-863 VHF/UHF" -- name of radio
|
|
ExportScript.genericRadioConf[1]['DeviceID'] = 38 -- DeviceID for GetDevice from device.lua
|
|
ExportScript.genericRadioConf[1]['setFrequency'] = true -- change frequency active
|
|
ExportScript.genericRadioConf[1]['FrequencyMultiplicator'] = 1000000 -- Multiplicator from Hz to MHz
|
|
ExportScript.genericRadioConf[1]['FrequencyFormat'] = "%7.3f" -- frequency view format LUA style
|
|
ExportScript.genericRadioConf[1]['FrequencyStep'] = 25 -- minimal step for frequency change
|
|
ExportScript.genericRadioConf[1]['minFrequency'] = 100.000 -- lowest frequency
|
|
ExportScript.genericRadioConf[1]['maxFrequency'] = 399.975 -- highest frequency
|
|
ExportScript.genericRadioConf[1]['Power'] = {} -- power button active
|
|
ExportScript.genericRadioConf[1]['Power']['ButtonID'] = 3068 -- power button id from cklickable.lua
|
|
ExportScript.genericRadioConf[1]['Power']['ValueOn'] = 1.0 -- power on value from cklickable.lua
|
|
ExportScript.genericRadioConf[1]['Power']['ValueOff'] = -1.0 -- power off value from cklickable.lua
|
|
ExportScript.genericRadioConf[1]['Volume'] = {} -- volume knob active
|
|
ExportScript.genericRadioConf[1]['Volume']['ButtonID'] = 3005 -- volume button id from cklickable.lua
|
|
-- ExportScript.genericRadioConf[1]['Preset'] = {} -- preset knob active
|
|
-- ExportScript.genericRadioConf[1]['Preset']['ArgumentID'] = 161 -- ManualPreset argument id from cklickable.lua
|
|
-- ExportScript.genericRadioConf[1]['Preset']['ButtonID'] = 3001 -- preset button id from cklickable.lua
|
|
-- Preset based on switchlogic on clickabledata.lua
|
|
-- ExportScript.genericRadioConf[1]['Preset']['List'] = {[0.0]="01",[0.05]="02",[0.10]="03",[0.15]="04",[0.20]="05",[0.25]="06",[0.30]="07",[0.35]="08",[0.40]="09",[0.45]="10",[0.50]="11",[0.55]="12",[0.60]="13",[0.65]="14",[0.70]="15",[0.75]="16",[0.80]="17",[0.85]="18",[0.90]="19",[0.95]="20",[1.00]="01"}
|
|
-- ExportScript.genericRadioConf[1]['Preset']['Step'] = 0.05 -- minimal step for preset change
|
|
ExportScript.genericRadioConf[1]['Squelch'] = {} -- squelch switch active
|
|
ExportScript.genericRadioConf[1]['Squelch']['ArgumentID'] = 155 -- ManualPreset argument id from cklickable.lua
|
|
ExportScript.genericRadioConf[1]['Squelch']['ButtonID'] = 3004 -- squelch button id from cklickable.lua
|
|
ExportScript.genericRadioConf[1]['Squelch']['ValueOn'] = 1.0 -- squelch on value from cklickable.lua
|
|
ExportScript.genericRadioConf[1]['Squelch']['ValueOff'] = 0.0 -- squelch off value from cklickable.lua
|
|
-- ExportScript.genericRadioConf[1]['Load'] = {} -- load button preset
|
|
-- ExportScript.genericRadioConf[1]['Load']['ButtonID'] = 3015 -- load button id from cklickable.lua
|
|
-- ManualPreset is AM FM modus switch Manual=AM, Preset=FM
|
|
-- ExportScript.genericRadioConf[1]['ManualPreset'] = {} -- switch manual or preset active
|
|
-- ExportScript.genericRadioConf[1]['ManualPreset']['ArgumentID'] = 369 -- ManualPreset argument id from cklickable.lua
|
|
-- ExportScript.genericRadioConf[1]['ManualPreset']['ButtonID'] = 3001 -- ManualPreset button id from cklickable.lua
|
|
-- ExportScript.genericRadioConf[1]['ManualPreset']['ValueManual'] = 0.0-- ManualPreset Manual value from cklickable.lua
|
|
-- ExportScript.genericRadioConf[1]['ManualPreset']['ValuePreset'] = 0.1-- ManualPreset Preset value from cklickable.lua
|
|
|
|
ExportScript.genericRadioConf[2] = {} -- secound radio
|
|
ExportScript.genericRadioConf[2]['Name'] = "YaDRO-1A HF" -- name of radio
|
|
ExportScript.genericRadioConf[2]['DeviceID'] = 37 -- DeviceID for GetDevice from device.lua
|
|
ExportScript.genericRadioConf[2]['setFrequency'] = true -- change frequency active
|
|
ExportScript.genericRadioConf[2]['FrequencyMultiplicator'] = 1000000 -- Multiplicator from Hz to MHz
|
|
ExportScript.genericRadioConf[2]['FrequencyFormat'] = "%7.4f" -- frequency view format LUA style
|
|
ExportScript.genericRadioConf[2]['FrequencyStep'] = 1 -- minimal step for frequency change
|
|
ExportScript.genericRadioConf[2]['minFrequency'] = 2.000 -- lowest frequency
|
|
ExportScript.genericRadioConf[2]['maxFrequency'] = 17.999 -- highest frequency
|
|
ExportScript.genericRadioConf[2]['Power'] = {} -- power button active
|
|
ExportScript.genericRadioConf[2]['Power']['ButtonID'] = 3013 -- power button id from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['Power']['ValueOn'] = 0.1 -- power on value from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['Power']['ValueOff'] = 0.0 -- power off value from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['Volume'] = {} -- volume knob active
|
|
ExportScript.genericRadioConf[2]['Volume']['ButtonID'] = 3007 -- volume button id from cklickable.lua
|
|
-- ExportScript.genericRadioConf[2]['Preset'] = {} -- preset knob active
|
|
-- ExportScript.genericRadioConf[2]['Preset']['ArgumentID'] = 137 -- ManualPreset argument id from cklickable.lua
|
|
-- ExportScript.genericRadioConf[2]['Preset']['ButtonID'] = 3001 -- preset button id from cklickable.lua
|
|
-- Preset based on switchlogic on clickabledata.lua
|
|
-- ExportScript.genericRadioConf[2]['Preset']['List'] = {[0.0]="01",[0.01]="02",[0.02]="03",[0.03]="04",[0.04]="05",[0.05]="06",[0.06]="07",[0.07]="08",[0.08]="09",[0.09]="10",[0.10]="11",[0.11]="12",[0.12]="13",[0.13]="14",[0.14]="15",[0.15]="16",[0.16]="17",[0.17]="18",[0.18]="19",[0.19]="20",[0.20]="01"}
|
|
-- ExportScript.genericRadioConf[2]['Preset']['Step'] = 0.01 -- minimal step for preset change
|
|
ExportScript.genericRadioConf[2]['Squelch'] = {} -- squelch switch active
|
|
ExportScript.genericRadioConf[2]['Squelch']['ArgumentID'] = 743 -- ManualPreset argument id from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['Squelch']['ButtonID'] = 3008 -- squelch button id from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['Squelch']['ValueOn'] = 0.7 -- squelch on value from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['Squelch']['ValueOff'] = 0.0 -- squelch off value from cklickable.lua
|
|
-- Load is autotune lamp on Mi-8
|
|
ExportScript.genericRadioConf[2]['Load'] = {} -- load button preset
|
|
ExportScript.genericRadioConf[2]['Load']['ButtonID'] = nil -- load button id from cklickable.lua, Load button deactiviert
|
|
ExportScript.genericRadioConf[2]['Load']['ArgumentID'] = 849 -- load argument id for autotune lamp on Mi-8
|
|
-- ManualPreset button change between SSB (Single SideBand) and AM, Manual=SSB, AM=Preset
|
|
ExportScript.genericRadioConf[2]['ManualPreset'] = {} -- switch manual or preset active
|
|
ExportScript.genericRadioConf[2]['ManualPreset']['ArgumentID'] = 744 -- ManualPreset argument id from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['ManualPreset']['ButtonID'] = 3001 -- ManualPreset button id from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['ManualPreset']['ValueManual'] = 0.5-- ManualPreset Manual value from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['ManualPreset']['ValuePreset'] = 1.0-- ManualPreset Preset value from cklickable.lua
|
|
|
|
ExportScript.genericRadioConf[3] = {} -- secound radio
|
|
ExportScript.genericRadioConf[3]['Name'] = " R-828 LVHF FM" -- name of radio
|
|
ExportScript.genericRadioConf[3]['DeviceID'] = 39 -- DeviceID for GetDevice from device.lua
|
|
ExportScript.genericRadioConf[3]['setFrequency'] = false -- change frequency active
|
|
ExportScript.genericRadioConf[3]['FrequencyMultiplicator'] = 1000000 -- Multiplicator from Hz to MHz
|
|
ExportScript.genericRadioConf[3]['FrequencyFormat'] = "%7.3f" -- frequency view format LUA style
|
|
ExportScript.genericRadioConf[3]['FrequencyStep'] = 25 -- minimal step for frequency change
|
|
ExportScript.genericRadioConf[3]['minFrequency'] = 20.000 -- lowest frequency
|
|
ExportScript.genericRadioConf[3]['maxFrequency'] = 59.975 -- highest frequency
|
|
ExportScript.genericRadioConf[3]['Power'] = {} -- power button active
|
|
ExportScript.genericRadioConf[3]['Power']['ButtonID'] = 3005 -- power button id from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Power']['ValueOn'] = 1.0 -- power on value from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Power']['ValueOff'] = 0.0 -- power off value from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Volume'] = {} -- volume knob active
|
|
ExportScript.genericRadioConf[3]['Volume']['ButtonID'] = 3002 -- volume button id from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Preset'] = {} -- preset knob active
|
|
ExportScript.genericRadioConf[3]['Preset']['ArgumentID'] = 735 -- ManualPreset argument id from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Preset']['ButtonID'] = 3001 -- preset button id from cklickable.lua
|
|
-- ExportScript.genericRadioConf[3]['Preset']['ButtonID2'] = 3002 -- preset button id from cklickable.lua
|
|
-- Preset based on switchlogic on clickabledata.lua
|
|
ExportScript.genericRadioConf[3]['Preset']['List'] = {[0.0]="1",[0.1]="2",[0.2]="3",[0.3]="4",[0.4]="5",[0.5]="6",[0.6]="7",[0.7]="8",[0.8]="9",[0.9]="10"}
|
|
ExportScript.genericRadioConf[3]['Preset']['Step'] = 0.1 -- minimal step for preset change
|
|
-- ExportScript.genericRadioConf[3]['Preset']['Step2'] = -0.1 -- minimal step for preset change
|
|
ExportScript.genericRadioConf[3]['Squelch'] = {} -- squelch switch active
|
|
ExportScript.genericRadioConf[3]['Squelch']['ArgumentID'] = 739 -- ManualPreset argument id from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Squelch']['ButtonID'] = 3004 -- squelch button id from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Squelch']['ValueOn'] = 0.0 -- squelch on value from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Squelch']['ValueOff'] = -1.0 -- squelch off value from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Load'] = {} -- load button preset
|
|
ExportScript.genericRadioConf[3]['Load']['ButtonID'] = 3003 -- load button id from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Load']['ArgumentID'] = 740 -- load argument id for autotune lamp on Mi-8
|
|
-- ManualPreset change betwen VOICE and HOMING Mode, Manual=Voice, Preset=Homing
|
|
ExportScript.genericRadioConf[3]['ManualPreset'] = {} -- switch manual or preset active
|
|
ExportScript.genericRadioConf[3]['ManualPreset']['ArgumentID'] = 757 -- ManualPreset argument id from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['ManualPreset']['ButtonID'] = 3006 -- ManualPreset button id from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['ManualPreset']['ValueManual'] = 1.0-- ManualPreset Manual value from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['ManualPreset']['ValuePreset'] = 0.0-- ManualPreset Preset value from cklickable.lua
|
|
|
|
ExportScript.genericRadio(nil, nil)
|
|
|
|
--============================================================================================
|
|
--[[
|
|
ExportScript.Tools.WriteToLog('list_cockpit_params(): '..ExportScript.Tools.dump(list_cockpit_params()))
|
|
|
|
local ltmp1 = 0
|
|
for ltmp2 = 1, 10, 1 do
|
|
ltmp1 = list_indication(ltmp2)
|
|
ExportScript.Tools.WriteToLog(ltmp2..': '..ExportScript.Tools.dump(ltmp1))
|
|
--ExportScript.Tools.WriteToLog(ltmp2..' (metatable): '..ExportScript.Tools.dump(getmetatable(ltmp1)))
|
|
end
|
|
]]
|
|
end
|