mirror of
https://github.com/weyne85/DCS-ExportScripts.git
synced 2025-10-29 16:58:18 +00:00
9c007dd9c4
change A-10C add ID 717 for Standby Attitude Indicator knob arrow add ID 22 for ADI Pitch Trim Knob add ID 45 for HSI Heading Set Knob add ID 44 for HSI Course Set Knob add ID 67 for SAI Cage Standby Attitude Indicator. Hold Right Mouse Button and rotate Scroll Wheel to uncage add ID 66 for SAI Cage Standby Attitude Indicator. Hold Right Mouse Button and rotate Scroll Wheel to uncage add ID 68 for Clock Toggle Clock and Elapsed Time Modes add ID 69 for Clock Start, Stop and Reset Elapsed Timer change ID 127 to 128 for PTR-THROTTLE-FRICTION (Throttle Friction Control) add ID 652 for PTR-TEMS-DATA (TEMS DATA) add ID 773 for PTR-FLAPS (Flap Setting) add ID 709 for PTR-ARMGS-COVER (Arm Ground Safety Override Cover) add ID 710 for PTR-ARMGS-OVERRIDE-SWITCH (Arm Ground Safety Override Switch) add ID 666 for PTR-CBP-AILERON-DISC-L (AILERON DISC L) add ID 667 for PTR-CBP-AILERON-DISC-R (AILERON DISC R) add ID 668 for PTR-CBP-SPS-RUDDER-AUTH-LIM (SPS & RUDDER AUTH LIMIT) add ID 669 for PTR-CBP-ELEVATION-DISC-L (ELEVATION DISC L) add ID 670 for PTR-CBP-ELEVATION-DISC-R (ELEVATION DISC R) add ID 671 for PTR-CBP-AILERON-TAB-L (AILERON TAB L) add ID 672 for PTR-CBP-AILERON-TAB-R (AILERON TAB R) add ID 673 for PTR-CBP-EMER-FLAP (EMER FLAP) add ID 674 for PTR-CBP-EMER-TRIM (EMER TRIM) add ID 675 for PTR-CBP-LAND-GEAR (LAND GEAR) add ID 676 for PTR-CBP-ENGINE-START-L (ENGINE START L) add ID 677 for PTR-CBP-ENGINE-START-R (ENGINE START R) add ID 678 for PTR-CBP-APU-CONT (APU CONT) add ID 679 for PTR-CBP-ANG-IGNITOR-1 (ENG IGNITOR L/R-1) add ID 680 for PTR-CBP-ANG-IGNITOR-2 (ENG IGNITOR L/R-2) add ID 681 for PTR-CBP-EMER-FUEL-SHUTOFF-ENG-L (EMER FUEL SHUTOFF ENG L) add ID 682 for PTR-CBP-EMER-FUEL-SHUTOFF-ENG-R (EMER FUEL SHUTOFF ENG R) add ID 683 for PTR-CBP-DC-FUEL-PUMP (DC FUEL PUMP) add ID 684 for PTR-CBP-BLEED-AIR-CONT-L (BLEED AIR CONT L) add ID 685 for PTR-CBP-BLEED-AIR-CONT-R (BLEED AIR CONT R) add ID 686 for PTR-CBP-EXT-STORES-JETT-1 (EXT STORES JETT 1) add ID 687 for PTR-CBP-EXT-STORES-JETT-2 (EXT STORES JETT 2) add ID 688 for PTR-CBP-STBY-ATT-IND (STBY ATT IND) add ID 689 for PTR-CBP-MASTER-CAUT (MASTER CAUT) add ID 690 for PTR-CBP-PITOT-HEAT-AC (PITOT HEAT AC) add ID 691 for PTR-CBP-IFF (IFF) add ID 692 for PTR-CBP-UHF-COMM (UHF COMM) add ID 693 for PTR-CBP-INTER-COMM (INTER COMM) add ID 694 for PTR-CBP-GENERATOR-CONT-L (GENERATOR CONT L) add ID 695 for PTR-CBP-GENERATOR-CONT-R (GENERATOR CONT R) add ID 696 for PTR-CBP-CONVERTER-L (CONVERTER L) add ID 697 for PTR-CBP-AUX-ESS-BUS-0A (AUX ESS BUS 0A) add ID 698 for PTR-CBP-AUX-ESS-BUS-0B (AUX ESS BUS 0B) add ID 699 for PTR-CBP-AUX-ESS-BUS-0C (AUX ESS BUS 0C) add ID 700 for PTR-CBP-BATTERY-BUS-TRANS (BATTERY BUS TRANS) add ID 701 for PTR-CBP-INVERTER-PWR (INVERTER PWR) add ID 702 for PTR-CBP-INVERTER-CONT (INVERTER CONT) add ID 703 for PTR-CBP-AUX-ESS-BUS-TIE (AUX ESS BUS TIE) add ID 62 for PNT-ALT-LEVR-L (Set Pressure) add ID 60 for PNT-ALT-LEVR-R (ELECT/PNEU) add ID 770 for Seat Height Adjustment up/down add ID 787 for Extend boarding ladder cover add ID 788 for Extend boarding ladder button add ID 904 for Accelerometer Push to set add ID 789 for DVADR - Function control toggle switch add ID 776 for Anti-G suit valve test button add ID 777 for Internal canopy actuator disengage lever add ID 785 for Canopy jettison lever add ID 786 for Canopy Jettison Lever Unlock Button add ID 706 for IFF - antenna switch add ID 707 for UHF - antenna switch add ID 708 for EGI HQ TOD add ID 16 for RWR Adjust Display Brightness change AJS37 add ID 131 for Minute add ID 133 for Second (Arrow) add ID 1333 for Second add ID 135 for Clock Setting change AV8BNA add ID 350 for Backup ADI Cage change F-5E-3 format value for Radio with ID 327, 328, 329, 330 and 331 format value for TACAN XY Wheel ID 266 format value for set air speed knob ID 177 change FA-18C_hornet add ID 439 for FLIR Switch, ON/STBY/OFF add id 441 for LTD/R Switch, ARM/SAFE/AFT change Ka-50 add ID 573 for VM_15PV_BALT_tenths change M-2000C format value for ADI standby ID 328 format value for Rada altimeter mimimum knob ID 192 change UHF Radio Preset Chanel values change Mi-8MT format value for VD 10K L Press ID 21 change SA342L/SA342;/SA342Mistral change clock (minute) values for ID 42 change clock (second) values for ID 43 add ID 210 for clock ExtCouronne formate value Radar Alt lamp for ID 97
1328 lines
72 KiB
Lua
1328 lines
72 KiB
Lua
-- Mi-8MTV2 Export
|
|
|
|
ExportScript.FoundDCSModule = true
|
|
ExportScript.Version.Mi8MT = "1.2.1"
|
|
|
|
ExportScript.ConfigEveryFrameArguments =
|
|
{
|
|
--[[
|
|
every frames arguments
|
|
based of "mainpanel_init.lua"
|
|
Example (http://www.lua.org/manual/5.1/manual.html#pdf-string.format)
|
|
[DeviceID] = "Format"
|
|
[4] = "%.4f", <- floating-point number with 4 digits after point
|
|
[19] = "%0.1f", <- floating-point number with 1 digit after point
|
|
[129] = "%1d", <- decimal number
|
|
[5] = "%.f", <- floating point number rounded to a decimal number
|
|
]]
|
|
|
|
-- CONTROLLERS
|
|
---------------------------------------------------------------
|
|
----[209] = "%.4f", -- rudder { -1, 1}
|
|
--[266] = "%.4f", -- rudder_add { 1, -1}
|
|
--[181] = "%.4f", -- stick_roll {1, -1}
|
|
--[180] = "%.4f", -- stick_pitch {1, -1}
|
|
--[191] = "%.4f", -- collective_position {0, 1}
|
|
--[192] = "%1d", -- correction_position {1, 0}
|
|
--[230] = "%1d", -- collective_position_operator {0, 1}
|
|
--[231] = "%1d", -- correction_position_operator {1, 0}
|
|
--[560] = "%1d", -- coll_ROUTE_DESCENT_sw {0, 1}
|
|
--[558] = "%1d", -- coll_ReadjustFreeTurbRPM_sw {0, 1}
|
|
----[208] = "%1d", -- collective_stopper {0, 1}
|
|
--[187] = "%.4f", -- left_engine_throttle {0.0, 1.0}
|
|
--[189] = "%.4f", -- right_engine_throttle {0.0, 1.0}
|
|
--[881] = "%.4f", -- wheelBrakes {0.0, 1.0}
|
|
----[579] = "", -- throttle_cover {0.0, 1.0}
|
|
----[208] = "", -- rotor_brake_handle {0.0, 1.0}
|
|
-- Variometer
|
|
---------------------------------------------------------------
|
|
[16] = "%.4f", -- Variometer_L {-30, -20, -10, -5, -2, -1, 0, 1, 2, 5, 10, 20, 30} {-1.0, -0.71, -0.43, -0.23, -0.09, -0.05, 0, 0.05, 0.09, 0.23, 0.43, 0.71, 1.0}
|
|
[95] = "%.4f", -- Variometer_R {-30, -20, -10, -5, -2, -1, 0, 1, 2, 5, 10, 20, 30} {-1.0, -0.71, -0.43, -0.23, -0.09, -0.05, 0, 0.05, 0.09, 0.23, 0.43, 0.71, 1.0}
|
|
-- Airspeed
|
|
---------------------------------------------------------------
|
|
[24] = "%.4f", -- IAS_L {-10.0, 0.0, 13.889, 27.78, 41.67, 55.56, 69.44, 83.33, 111.1, 125.0, 129.2} {0.0, 0.001, 0.028, 0.165, 0.277, 0.393, 1.0}
|
|
[790] = "%.4f", -- IAS_R {-10.0, 0.0, 13.889, 27.78, 41.67, 55.56, 69.44, 83.33, 111.1, 125.0, 129.2} {0.0, 0.001, 0.028, 0.165, 0.277, 0.393, 1.0}
|
|
-- AGB-3k
|
|
---------------------------------------------------------------
|
|
[13] = "%.4f", -- AGB_3K_Left_roll {-1.0, 1.0}
|
|
--[12] = "%.4f", -- AGB_3K_Left_pitch {1.0, -1.0}
|
|
[14] = "%.4f", -- AGB_3K_Left_failure_flag {0.0, 1.0}
|
|
[15] = "%.4f", -- AGB_3K_Left_sideslip {1.0, -1.0}
|
|
[820] = "%.4f", -- AGB_3K_Left_index {0.5, -0.5}
|
|
------
|
|
[92] = "%.4f", -- AGB_3K_Right_roll {-1.0, 1.0}
|
|
--[91] = "%.4f", -- AGB_3K_Right_pitch {1.0, -1.0}
|
|
[93] = "%.4f", -- AGB_3K_Right_failure_flag {0.0, 1.0}
|
|
[94] = "%.4f", -- AGB_3K_Right_sideslip {1.0, -1.0}
|
|
[821] = "%.4f", -- AGB_3K_Right_index {0.5, -0.5}
|
|
-- EUP-53
|
|
---------------------------------------------------------------
|
|
[22] = "%.4f", -- EUP_speed {-1.0, 1.0}
|
|
[23] = "%.4f", -- EUP_sideslip {-1.0, 1.0}
|
|
-- UGR-4K
|
|
---------------------------------------------------------------
|
|
[25] = "%.4f", -- UGR_4K_heading_L {0.0, 1.0}
|
|
[27] = "%.4f", -- UGR_4K_commanded_course_L {0.0, 1.0}
|
|
[28] = "%.4f", -- UGR_4K_bearing_needle_L {0.0, 1.0}
|
|
----
|
|
[101] = "%.4f", -- UGR_4K_heading_R {0.0, 1.0}
|
|
[103] = "%.4f", -- UGR_4K_commanded_course_R {0.0, 1.0}
|
|
[104] = "%.4f", -- UGR_4K_bearing_needle_R {0.0, 1.0}
|
|
-- Barometric altimeter VD-10K
|
|
---------------------------------------------------------------
|
|
[19] = "%.4f", -- VD_10K_L_100 {0.0, 1.0}
|
|
[20] = "%.4f", -- VD_10K_L_10 {0.0, 1.0}
|
|
[833] = "%.4f", -- VD_10K_L_100_Ind {0.0, 1.0}
|
|
[832] = "%.4f", -- VD_10K_L_10_Ind {0.0, 1.0}
|
|
[916] = "%.4f", -- VD_10K_L_Shutter {0.822, 0.75}
|
|
--[21] = "%.4f", -- VD_10K_L_PRESS {0.0, 1.0}
|
|
-----
|
|
[98] = "%.4f", -- VD_10K_R_100 {0.0, 1.0}
|
|
[99] = "%.4f", -- VD_10K_R_10 {0.0, 1.0}
|
|
[835] = "%.4f", -- VD_10K_R_100_Ind {0.0, 1.0}
|
|
[917] = "%.4f", -- VD_10K_R_Shutter {0.822, 0.75}
|
|
[834] = "%.4f", -- VD_10K_R_10_Ind {0.0, 1.0}
|
|
[100] = "%.4f", -- VD_10K_R_PRESS {0.0, 1.0}
|
|
-- Rotor RPM
|
|
---------------------------------------------------------------
|
|
[42] = "%.4f", -- RotorRPM {0.0, 1.0}
|
|
[787] = "%.4f", -- RotorRPM_Oper {0.0, 1.0}
|
|
-- Rotor Pitch
|
|
---------------------------------------------------------------
|
|
[36] = "%.2f", -- RotorPitch {1.0, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 9.0, 10.0, 11.0, 12.0, 13.0, 14.0, 15.0} {0.0, 0.07, 0.14, 0.21, 0.29, 0.35, 0.43, 0.5, 0.57, 0.64, 0.71, 0.79, 0.86, 0.93, 1.0}
|
|
-- Radar altimeter A-036
|
|
---------------------------------------------------------------
|
|
[34] = "%.3f", -- A_036_RALT {0, 100, 300, 800} {0.0, 0.475, 0.625, 1.0}
|
|
[31] = "%.3f", -- A_036_DangerRALT_index {0, 100, 300, 800} {0.0, 0.475, 0.625, 1.0}
|
|
[30] = "%.f", -- A_036_DangerRALT_lamp {0.0, 1.0}
|
|
[33] = "%.1f", -- A_036_warning_flag {0.0, 1.0}
|
|
-- Engines RPM
|
|
---------------------------------------------------------------
|
|
[40] = "%.4f", -- LeftEngineRPM {0.0, 110.0} {0.0, 1.0}
|
|
[41] = "%.4f", -- RightEngineRPM {0.0, 110.0} {0.0, 1.0}
|
|
[788] = "%.4f", -- LeftEngineRPM_Oper {0.0, 110.0} {0.0, 1.0}
|
|
[789] = "%.4f", -- RightEngineRPM_Oper {0.0, 110.0} {0.0, 1.0}
|
|
-- Engines temperature
|
|
---------------------------------------------------------------
|
|
[43] = "%.4f", -- LeftEngineTemperatureHund {0.0, 1200.0} {0.0, 1.0}
|
|
[44] = "%.4f", -- LeftEngineTemperatureTenth {0.0, 100.0} {0.0, 1.0}
|
|
[45] = "%.4f", -- RightEngineTemperatureHund {0.0, 1200.0} {0.0, 1.0}
|
|
[46] = "%.4f", -- RightEngineTemperatureTenth {0.0, 100.0} {0.0, 1.0}
|
|
-- Engines mode indicator
|
|
---------------------------------------------------------------
|
|
[39] = "%.4f", -- EnginesMode {0.0, 1.0}
|
|
[37] = "%.4f", -- LeftEngineMode {0.0, 1.0}
|
|
[38] = "%.4f", -- RightEngineMode {0.0, 1.0}
|
|
-- Engines brakes
|
|
---------------------------------------------------------------
|
|
[204] = "%.1f", -- left_engine_brake_handle {0.0, 1.0}
|
|
[206] = "%.1f", -- right_engine_brake_handle {0.0, 1.0}
|
|
[203] = "%.1f", -- left_engine_brake_handle_holder {0.0, 1.0}
|
|
[205] = "%.1f", -- right_engine_brake_handle_holder {0.0, 1.0}
|
|
-- DISS 15
|
|
---------------------------------------------------------------
|
|
[830] = "%.4f", -- diss15_hover_x {-1.0, 0, 1.0}
|
|
[828] = "%.4f", -- diss15_hover_y {-1.0, 1.0}
|
|
[829] = "%.4f", -- diss15_hover_z {-1.0, 1.0}
|
|
[831] = "%.4f", -- diss15_hover_lamp_off {0.0, 0.9}
|
|
----
|
|
[791] = "%.4f", -- diss15_drift_angle {-1.0, 1.0}
|
|
----
|
|
[795] = "%.4f", -- diss15_W_shutter {0.0, 1.0}
|
|
[796] = "%.1f", -- diss15_W_memory_lamp {1.0, 0.0}
|
|
[792] = "%.4f", -- diss15_W_hundreds {0.0, 1.0}
|
|
[793] = "%.4f", -- diss15_W_tens {0.0, 1.0}
|
|
[794] = "%.4f", -- diss15_W_ones {0.0, 1.0}
|
|
----
|
|
[817] = "%.4f", -- diss15_coord_on_lamp {1.0, 0.0}
|
|
[805] = "%.4f", -- diss15_coord_forward {1.0, 0.0}
|
|
[806] = "%.4f", -- diss15_coord_X_hundreds {0.0, 1.0}
|
|
[807] = "%.4f", -- diss15_coord_X_tens {0.0, 1.0}
|
|
[808] = "%.4f", -- diss15_coord_X_ones {0.0, 1.0}
|
|
[802] = "%.4f", -- diss15_coord_right {0.0, 1.0}
|
|
[799] = "%.4f", -- diss15_coord_Z_hundreds {0.0, 1.0}
|
|
[800] = "%.4f", -- diss15_coord_Z_tens {0.0, 1.0}
|
|
[801] = "%.4f", -- diss15_coord_Z_ones {0.0, 1.0}
|
|
[811] = "%.4f", -- diss15_coord_angle_hundreds {0.0, 1.0}
|
|
[812] = "%.4f", -- diss15_coord_angle_tens {0.0, 1.0}
|
|
[813] = "%.4f", -- diss15_coord_angle_ones {0.0, 1.0}
|
|
[814] = "%.4f", -- diss15_coord_angle_minutes {0.0, 1.0}
|
|
----
|
|
[822] = "%.f", -- diss15_check_control_lamp {0.0, 0.9}
|
|
[823] = "%.f", -- diss15_check_work_lamp {0.0, 0.9}
|
|
[824] = "%.f", -- diss15_check_failM_lamp {0.0, 0.9}
|
|
[825] = "%.f", -- diss15_check_failC_lamp {0.0, 0.9}
|
|
-- Oil
|
|
---------------------------------------------------------------
|
|
[111] = "%.4f", -- oils_p_main_reductor {0.0, 1.0}
|
|
[114] = "%.2f", -- oils_t_main_reductor {0.0, 1.0} {-0.25, 0.75}
|
|
[113] = "%.2f", -- oils_temp_tail_reductor {0.0, 1.0} {-0.25, 0.75}
|
|
[112] = "%.2f", -- oils_temp_intermediate_reductor {0.0, 1.0} {-0.25, 0.75}
|
|
[115] = "%.4f", -- oils_p_left_engine {0.0, 1.0}
|
|
[116] = "%.2f", -- oils_t_left_engine {-0.25, 0.75}
|
|
[117] = "%.4f", -- oils_p_right_engine {0.0, 1.0}
|
|
[118] = "%.2f", -- oils_t_right_engine {-0.25, 0.75}
|
|
-- Autopilot
|
|
---------------------------------------------------------------
|
|
[122] = "%.4f", -- autopilot_yaw_indicator {-1.0, 1.0}
|
|
[124] = "%.4f", -- autopilot_pitch_indicator {-1.0, 1.0}
|
|
[123] = "%.2f", -- autopilot_roll_indicator {-0.33, 0.33}
|
|
[125] = "%.4f", -- autopilot_altitude_indicator {-1.0, 1.0}
|
|
[119] = "%.4f", -- autopilot_yaw_scale {0.0, 1.0}
|
|
[120] = "%.4f", -- autopilot_roll_scale {0.0, 1.0}
|
|
[121] = "%.4f", -- autopilot_pitch_scale {0.0, 1.0}
|
|
-- Center upper panel
|
|
---------------------------------------------------------------
|
|
[404] = "%.2f", -- hydro_pressure_main {0.05, 0.33, 0.52, 0.69, 1.0}
|
|
[405] = "%.2f", -- hydro_pressure_aux {0.05, 0.33, 0.52, 0.69, 1.0}
|
|
[402] = "%.2f", -- APU_temperature {0.0, 0.2, 0.42, 0.69, 0.94, 1.0}
|
|
[403] = "%.2f", -- APU_pressure {0.04, 0.95}
|
|
-- Mechanic clock
|
|
---------------------------------------------------------------
|
|
[49] = "%.4f", -- CLOCK_currtime_hours {0.0, 1.0}
|
|
[50] = "%.4f", -- CLOCK_currtime_minutes {0.0, 1.0}
|
|
[51] = "%.4f", -- CLOCK_currtime_seconds {0.0, 1.0}
|
|
[56] = "%.4f", -- CLOCK_flight_time_meter_status {0.0, 1.0}
|
|
[52] = "%.4f", -- CLOCK_flight_hours {0.0, 1.0}
|
|
[53] = "%.4f", -- CLOCK_flight_minutes {0.0, 1.0}
|
|
[54] = "%.4f", -- CLOCK_seconds_meter_time_minutes {0.0, 1.0}
|
|
[55] = "%.4f", -- CLOCK_seconds_meter_time_seconds {0.0, 1.0}
|
|
-- Fuel tanks
|
|
---------------------------------------------------------------
|
|
[62] = "%.3f", -- FuelScaleUpper {0.0, 200.0, 400.0, 800.0, 1600.0, 2000.0, 2400.0, 2800.0} {0.0, 0.131, 0.244, 0.414, 0.647, 0.705, 0.9, 1.0}
|
|
[62] = "%.3f", -- FuelScaleLower {0.0, 200.0, 300.0, 400.0, 600.0, 1200.0, 2240.0} {0.0, 0.165, 0.283, 0.393, 0.618, 1.0}
|
|
-- Air system gauges
|
|
---------------------------------------------------------------
|
|
[320] = "%.2f", -- air_system_pressure {0.0, 25.0, 50.0, 100.0} {0.0, 0.23, 0.48, 1.0}
|
|
[321] = "%.4f", -- air_system_brake_pressure {0.0, 1.0}
|
|
-- SPUU-52
|
|
---------------------------------------------------------------
|
|
[126] = "%.4f", -- SPUU_pointer {-1.0, 1.0}
|
|
[786] = "%.f", -- SPUU52_lamp {0.0, 1.0}
|
|
-- PU-26 LAMP
|
|
---------------------------------------------------------------
|
|
[827] = "%.f", -- PU_26_GA_Lamp {0.0, 1.0} {0.0, 0.5}
|
|
-- ARC-UD
|
|
---------------------------------------------------------------
|
|
[458] = "%.f", -- ARC_UD_Narrow_Lamp {0.0, 0.9}
|
|
[459] = "%.f", -- ARC_UD_Wide_Lamp {0.0, 0.9}
|
|
[460] = "%.f", -- ARC_UD_Pulse_Lamp {0.0, 0.9}
|
|
-- ARC-9
|
|
---------------------------------------------------------------
|
|
[681] = "%.4f", -- ARC_9_Signal {0.0, 1.0}
|
|
----
|
|
[857] = "%.4f", -- PKV_Reflector {0.0, 1.0}
|
|
----
|
|
[778] = "%.4f", -- SAFE_WEAP {0.0, 1.0}
|
|
----
|
|
[577] = "%.4f", -- AMMO_CNT1_1 {0.0, 1.0}
|
|
[578] = "%.4f", -- AMMO_CNT1_2 {0.0, 1.0}
|
|
[580] = "%.4f", -- AMMO_CNT2_1 {0.0, 1.0}
|
|
[581] = "%.4f", -- AMMO_CNT2_2 {0.0, 1.0}
|
|
[583] = "%.4f", -- AMMO_CNT3_1 {0.0, 1.0}
|
|
[584] = "%.4f", -- AMMO_CNT3_2 {0.0, 1.0}
|
|
-- Radio R-828
|
|
---------------------------------------------------------------
|
|
[740] = "%.2f", -- R828_ASU {0.0, 1.0} {0.0, 0.95}
|
|
[736] = "%.3f", -- R828_channel {0, 1, 2, 3, 4, 5, 6, 7, 8, 9} {0.0, 0.101, 0.199, 0.302, 0.400, 0.502, 0.601, 0.697, 0.801, 0.898}
|
|
-- Damage
|
|
---------------------------------------------------------------
|
|
--[215] = "%0.1f", -- Blister_LEFT {0.0, 1.0} {0.0, 0.8}
|
|
--[216] = "%0.1f", -- Blister_RIGHT {0.0, 1.0} {0.0, 0.8}
|
|
----
|
|
--[878] = "%.1f", -- WindShiels_Up {0.0, 1.0}
|
|
--[879] = "%.1f", -- WindShiels_Down {0.0, 1.0}
|
|
-- UV-26
|
|
---------------------------------------------------------------
|
|
--[892] = "%.1f", -- UV26_Left {0.0, 1.0}
|
|
--[891] = "%.1f", -- UV26_Right {0.0, 1.0}
|
|
-- Pilots
|
|
---------------------------------------------------------------
|
|
--[245] = "%.1f", -- Pilot_Body {0.0, 1.0}
|
|
--[242] = "%.1f", -- Operator_Body {0.0, 1.0}
|
|
--[262] = "%.1f", -- Crew_Body {0.0, 1.0}
|
|
-- Damage
|
|
---------------------------------------------------------------
|
|
--[876] = "%.1f", -- Upper_Windshield {0.0, 1.0}
|
|
--[877] = "%.1f", -- Down_Windshield {0.0, 1.0}
|
|
--[879] = "%.1f", -- Left_Windshield {0.0, 1.0}
|
|
--[878] = "%.1f", -- Right_Windshield {0.0, 1.0}
|
|
-- Jadro 1A
|
|
---------------------------------------------------------------
|
|
[849] = "%.f", -- Jadro_ASU_Lamp {0.0, 1.0}
|
|
[848] = "%.f", -- Jadro_Ctl_Lamp {0.0, 1.0}
|
|
[850] = "%.f", -- Jadro_Breakdown_Lamp {0.0, 1.0}
|
|
----
|
|
[904] = "%.4f", -- RAM_Temp {-50.0, 0.0, 70.0} {-1.0, 0.0, 1.0}
|
|
----
|
|
[907] = "%.4f", -- G_Meter {-1.0, 1.0, 3.0} {-1.0, 0.343, 1.0}
|
|
[908] = "%.4f", -- G_Meter_Max {1.0, 3.0} {0.343, 1.0}
|
|
[909] = "%.4f", -- G_Meter_Min {-1.0, 1.0} {-1.0, 0.343}
|
|
----
|
|
[903] = "%1d", -- filter_handle {0,1}
|
|
----
|
|
[63] = "%.4f", -- SalonTemperature {-70.0, -60.0, -30.0, -20.0, -10.0, 0.0, 10.0, 20.0, 30.0, 60.0, 70.0} {-0.7, -0.593, -0.296, -0.227, -0.125, 0.003, 0.132, 0.233, 0.302, 0.603, 0.693}
|
|
-- electric system gauges
|
|
---------------------------------------------------------------
|
|
[526] = "%.4f", -- DC_voltage {0.0, 30.0} {0.0, 1.0}
|
|
[532] = "%.2f", -- AC_voltage {0.0, 100.0, 150.0, 200.0, 250.0} {0.0, 0.14, 0.31, 0.56, 1.0}
|
|
[493] = "%.4f", -- DC_APU_current {0.0, 400.0} {0.0, 1.0}
|
|
[527] = "%.4f", -- DC_battery_I_current {0.0, 400.0} {0.0, 1.0}
|
|
[528] = "%.4f", -- DC_battery_II_current {0.0, 400.0} {0.0, 1.0}
|
|
[529] = "%.4f", -- DC_VU_I_current {0.0, 400.0} {0.0, 1.0}
|
|
[530] = "%.4f", -- DC_VU_II_current {0.0, 400.0} {0.0, 1.0}
|
|
[531] = "%.4f", -- DC_VU_III_current {0.0, 400.0} {0.0, 1.0}
|
|
[533] = "%.2f", -- AC_generator_I_current {0.0, 50, 70, 90, 120, 130, 140, 150} {0.0, 0.1, 0.2, 0.36, 0.63, 0.75, 0.86, 1.0}
|
|
[534] = "%.2f", -- AC_generator_II_current {0.0, 50, 70, 90, 120, 130, 140, 150} {0.0, 0.1, 0.2, 0.36, 0.63, 0.75, 0.86, 1.0}
|
|
[371] = "%.2f", -- AntiIce_ampermeter {0.0, 50, 70, 90, 120, 130, 140, 150} {0.0, 0.1, 0.2, 0.36, 0.63, 0.75, 0.86, 1.0}
|
|
-- LAMPS
|
|
---------------------------------------------------------------
|
|
[781] = "%.f", -- lamp_AP_heading_on
|
|
[782] = "%.f", -- lamp_AP_heading_off
|
|
[783] = "%.f", -- lamp_AP_pitch_roll_on
|
|
[784] = "%.f", -- lamp_AP_height_on
|
|
[785] = "%.f", -- lamp_AP_height_off
|
|
[316] = "%.f", -- lamp_ENGINE_RT_LEFT_ON
|
|
[317] = "%.f", -- lamp_ENGINE_RT_RIGHT_ON
|
|
[318] = "%.f", -- lamp_SARPP_ON
|
|
[325] = "%.f", -- lamp_Descent_Siren
|
|
[326] = "%.f", -- lamp_LOCK_OPEN
|
|
[327] = "%.f", -- lamp_DOORS_OPEN
|
|
[340] = "%.f", -- lamp_TURN_ON_RI_65
|
|
[360] = "%.f", -- lamp_FROST
|
|
[362] = "%.f", -- lamp_LEFT_ENG_HEATING
|
|
[363] = "%.f", -- lamp_RIGHT_ENG_HEATING
|
|
[361] = "%.f", -- lamp_ANTI_ICE_ON
|
|
[364] = "%.f", -- lamp_LEFT_PZU_FRONT
|
|
[365] = "%.f", -- lamp_RIGHT_PZU_FRONT
|
|
[366] = "%.f", -- lamp_LEFT_PZU_BACK
|
|
[367] = "%.f", -- lamp_RIGHT_PZU_BACK
|
|
[373] = "%.f", -- lamp_SECTION_1
|
|
[375] = "%.f", -- lamp_SECTION_2
|
|
[374] = "%.f", -- lamp_SECTION_3
|
|
[376] = "%.f", -- lamp_SECTION_4
|
|
[368] = "%.f", -- lamp_RIO_heating_ok
|
|
[377] = "%.f", -- lamp_LEFT_ENG_FIRE
|
|
[378] = "%.f", -- lamp_RIGHT_ENG_FIRE
|
|
[379] = "%.f", -- lamp_KO50_FIRE
|
|
[380] = "%.f", -- lamp_REDUC_AI9_FIRE
|
|
[381] = "%.f", -- lamp_FIRE_LENG_1_QUEUE
|
|
[382] = "%.f", -- lamp_FIRE_RENG_1_QUEUE
|
|
[383] = "%.f", -- lamp_FIRE_KO50_1_QUEUE
|
|
[384] = "%.f", -- lamp_FIRE_REDUCT_1_QUEUE
|
|
[385] = "%.f", -- lamp_FIRE_LENG_2_QUEUE
|
|
[386] = "%.f", -- lamp_FIRE_RENG_2_QUEUE
|
|
[387] = "%.f", -- lamp_FIRE_KO50_2_QUEUE
|
|
[388] = "%.f", -- lamp_FIRE_REDUCT_2_QUEUE
|
|
[398] = "%.f", -- lamp_CHECK_SENSORS
|
|
[407] = "%.f", -- lamp_HYDRO_main_on
|
|
[408] = "%.f", -- lamp_HYDRO_aux_on
|
|
[414] = "%.f", -- lamp_APD9_on
|
|
[416] = "%.f", -- lamp_APD9_oil_pressure
|
|
[417] = "%.f", -- lamp_APD9_rpm
|
|
[418] = "%.f", -- lamp_APD9_rpm_high
|
|
[420] = "%.f", -- lamp_APD_on
|
|
[424] = "%.f", -- lamp_APD_starter_on
|
|
[434] = "%.f", -- lamp_FUEL_left_closed
|
|
[435] = "%.f", -- lamp_FUEL_right_closed
|
|
[436] = "%.f", -- lamp_FUEL_ring_closed
|
|
[441] = "%.f", -- lamp_FUEL_center_on
|
|
[442] = "%.f", -- lamp_FUEL_left_on
|
|
[443] = "%.f", -- lamp_FUEL_right_on
|
|
[461] = "%.f", -- lamp_HEATER
|
|
[462] = "%.f", -- lamp_IGNITION
|
|
[463] = "%.f", -- lamp_KO50_ON
|
|
[341] = "%.f", -- lamp_LEFT_PITOT_HEATER_OK
|
|
[490] = "%.f", -- lamp_RIGHT_PITOT_HEATER_OK
|
|
[509] = "%.f", -- lamp_LEFT_PZU_ON
|
|
[510] = "%.f", -- lamp_RIGHT_PZU_ON
|
|
[504] = "%.f", -- lamp_ELEC_turn_VU1
|
|
[505] = "%.f", -- lamp_ELEC_turn_VU2
|
|
[506] = "%.f", -- lamp_ELEC_turn_VU3
|
|
[507] = "%.f", -- lamp_ELEC_DC_ground
|
|
[508] = "%.f", -- lamp_ELEC_test_equipment
|
|
[543] = "%.f", -- lamp_ELEC_gen1_fail
|
|
[544] = "%.f", -- lamp_ELEC_gen2_fail
|
|
[545] = "%.f", -- lamp_ELEC_AC_ground
|
|
[546] = "%.f", -- lamp_ELEC_PO_500
|
|
[86] = "%.f", -- lamp_CIRCUIT_FROM_BATTERY
|
|
[68] = "%.f", -- lamp_CLOG_TF_LEFT
|
|
[69] = "%.f", -- lamp_CLOG_TF_RIGHT
|
|
[70] = "%.f", -- lamp_CHIP_LEFT_ENG
|
|
[71] = "%.f", -- lamp_CHIP_RIGHT_ENG
|
|
[72] = "%.f", -- lamp_VIBRATION_LEFT_HIGH
|
|
[73] = "%.f", -- lamp_VIBRATION_RIGHT_HIGH
|
|
[74] = "%.f", -- lamp_FIRE
|
|
[76] = "%.f", -- lamp_LEFT_ENG_TURN_OFF
|
|
[77] = "%.f", -- lamp_RIGHT_ENG_TURN_OFF
|
|
[78] = "%.f", -- lamp_FT_LEFT_HIGH
|
|
[79] = "%.f", -- lamp_FT_RIGHT_HIGH
|
|
[80] = "%.f", -- lamp_OIL_PRESSURE_LEFT
|
|
[81] = "%.f", -- lamp_OIL_PRESSURE_RIGHT
|
|
[82] = "%.f", -- lamp_ER_LEFT
|
|
[83] = "%.f", -- lamp_ER_RIGHT
|
|
[84] = "%.f", -- lamp_EEC_LEFT_OFF
|
|
[85] = "%.f", -- lamp_EEC_RIGHT_OFF
|
|
[873] = "%.f", -- lamp_CHIP_MAIN_REDUCTOR
|
|
[874] = "%.f", -- lamp_CHIP_INTER_REDUCTOR
|
|
[875] = "%.f", -- lamp_CHIP_TAIL_REDUCTOR
|
|
[64] = "%.f", -- lamp_300_Left
|
|
[65] = "%.f", -- lamp_DISS_OFF
|
|
[555] = "%.f", -- lamp_BD1
|
|
[556] = "%.f", -- lamp_BD2
|
|
[557] = "%.f", -- lamp_BD3
|
|
[558] = "%.f", -- lamp_BD4
|
|
[559] = "%.f", -- lamp_BD5
|
|
[560] = "%.f", -- lamp_BD6
|
|
[711] = "%.f", -- lamp_BD1Bomb
|
|
[712] = "%.f", -- lamp_BD2Bomb
|
|
[713] = "%.f", -- lamp_BD3Bomb
|
|
[714] = "%.f", -- lamp_BD4Bomb
|
|
[715] = "%.f", -- lamp_BD5Bomb
|
|
[716] = "%.f", -- lamp_BD6Bomb
|
|
[562] = "%.f", -- lamp_PUS1
|
|
[563] = "%.f", -- lamp_PUS3
|
|
[564] = "%.f", -- lamp_PUS4
|
|
[565] = "%.f", -- lamp_PUS6
|
|
[561] = "%.f", -- lamp_EmergExplode
|
|
[705] = "%.f", -- lamp_EmergExplodeSec
|
|
[710] = "%.f", -- lamp_BV_Net_On
|
|
[566] = "%.f", -- lamp_RS_Net_On
|
|
[567] = "%.f", -- lamp_GUV_Net_On
|
|
--[] = "%.f", -- lamp_MV_Net_On
|
|
[568] = "%.f", -- lamp_FKP_On
|
|
[778] = "%.f", -- lamp_Caution_Weap
|
|
--[] = "%.f", -- lamp_LeftSignal
|
|
--[] = "%.f", -- lamp_RightSignal
|
|
[586] = "%.f", -- lamp_Caution_Weap1
|
|
[587] = "%.f", -- lamp_Caution_Weap2
|
|
[588] = "%.f", -- lamp_Caution_Weap3
|
|
[306] = "%.f", -- lamp_Record_P503B
|
|
[302] = "%.f", -- lamp_IFF_KD
|
|
[303] = "%.f", -- lamp_IFF_KP
|
|
[912] = "%.f", -- lamp_IFF_TurnOnReserve
|
|
[87] = "%.f", -- lamp_IFF_Failure
|
|
-- Lights system
|
|
---------------------------------------------------------------
|
|
[880] = "%.f", -- RedLightLhGr1 {1.0, 0.0}
|
|
[896] = "%.f", -- RedLightLhGr2 {1.0, 0.0}
|
|
[897] = "%.f", -- RedLightRhGr1 {1.0, 0.0}
|
|
[898] = "%.f", -- RedLightRhGr2 {1.0, 0.0}
|
|
[899] = "%.f", -- RedLightChGr1 {1.0, 0.0}
|
|
[901] = "%.f", -- RedLightChGr2 {1.0, 0.0}
|
|
[922] = "%.f", -- RedLightChGr12 {1.0, 0.0}
|
|
[902] = "%.f", -- RedLight5V5 {1.0, 0.0}
|
|
[900] = "%.f", -- PlafondBrightness {1.0, 0.0}
|
|
[547] = "%.f", -- LeftPlafond {1.0, 0.0}
|
|
[665] = "%.f", -- RightPlafond {1.0, 0.0}
|
|
[920] = "%.f" -- RecorderP503B_PanelLightness {1.0, 0.0}
|
|
-- Windshield Wiper
|
|
--[254] = "%.4f" -- WindscreenWiperL {0.0, 1.0}
|
|
--[255] = "%.4f" -- WindscreenWiperR {0.0, 1.0}
|
|
}
|
|
ExportScript.ConfigArguments =
|
|
{
|
|
--[[
|
|
arguments for export in low tick interval
|
|
based on "clickabledata.lua"
|
|
]]
|
|
-- ELEC_INTERFACE
|
|
--[536] = "%.1f", -- PTR-EEP-LVR-ADJV1 (AC Voltage 1 set rotary) {-1, 1}
|
|
--[537] = "%.1f", -- PTR-EEP-LVR-ADJV2 (AC Voltage 2 set rotary) {-1, 1}
|
|
[538] = "%1d", --PTR-EEP-TMB-GEN1 (Generator 1)
|
|
[539] = "%1d", --PTR-EEP-TMB-GEN2 (Generator 2)
|
|
[540] = "%1d", --PTR-EEP-TMB-AER (AC ground power)
|
|
[541] = "%1d", --PTR-EEP-TMB-PO (115V Inverter)
|
|
[542] = "%1d", --PTR-EEP-TMB-PT (36V Inverter)
|
|
[535] = "%.1f", --PTR-EEP-LVR-MODE (AC Mode), 11 degrees
|
|
[494] = "%.1f", --PTR-RSPE-LVR-FEEDMODE (DC Bus Selector), 8 degrees
|
|
|
|
[495] = "%1d", --PTR-RSPE-TMB-AKK1 (Battery 1)
|
|
[496] = "%1d", --PTR-RSPE-TMB-AKK2 (Battery 2)
|
|
[497] = "%1d", --PTR-RSPE-TMB-RESGEN (Standby Generator)
|
|
--[498] = "%.1f", -- PTR-RSPE-LVR-V (DC Voltage set rotary) {-1, 1}
|
|
[499] = "%1d", --PTR-RSPE-TMB-RECT1 (Rectifier 1)
|
|
[500] = "%1d", --PTR-RSPE-TMB-RECT2 (Rectifier 2)
|
|
[501] = "%1d", --PTR-RSPE-TMB-RECT3 (Rectifier 3)
|
|
[502] = "%1d", --PTR-RSPE-TMB-AERF (DC ground power)
|
|
[503] = "%1d", --PTR-RSPE-TMB-TESTEQU (Equipment Test)
|
|
|
|
[147] = "%1d", --PTR-APP-CVR-CIRC (Standby Rectifier Cover)
|
|
[148] = "%1d", --PTR-APP-TMB-CIRC (Standby Rectifier)
|
|
[149] = "%1d", --PTR-APP-TMB-TRNS (36V Transformer)
|
|
|
|
[498] = "%.4f", --PTR-RSPE-LVR-V (Standby Generator Voltage Adjustment Rheostat)
|
|
[536] = "%.4f", --PTR-EEP-LVR-ADJV1 (Generator 1 Voltage Adjustment Rheostat)
|
|
[537] = "%.4f", --PTR-EEP-LVR-ADJV2 (Generator 2 Voltage Adjustment Rheostat)
|
|
[522] = "%.4f", --PTR-RSPE-TMB-WRMAKK (Battery Heating Switch, ON/OFF)
|
|
|
|
[590] = "%1d", --PTR-LAZS-TMB-BV-ZSBR (BW ESBR)
|
|
[591] = "%1d", --PTR-LAZS-TMB-BV-EXP (Explode)
|
|
[592] = "%1d", --PTR-LAZS-TMB-BV-DIR (Control)
|
|
[593] = "%1d", --PTR-LAZS-TMB-BV-EQU (Equipment)
|
|
[594] = "%1d", --PTR-LAZS-TMB-RSGUV-FIRE (RS/GUV Fire)
|
|
[595] = "%1d", --PTR-LAZS-TMB-RSGUV-SIGN (RS/GUV Warning)
|
|
[596] = "%1d", --PTR-LAZS-TMB-RSGUV-WARM (ESBR Heating)
|
|
|
|
[597] = "%1d", --PTR-LAZS-TMB-311 (GUV Out 800 Left)
|
|
[598] = "%1d", --PTR-LAZS-TMB-GUOUT-800L (GUV Out 800 Left)
|
|
[599] = "%1d", --PTR-LAZS-TMB-GUOUT-800R (GUV Out 800 Right)
|
|
[600] = "%1d", --PTR-LAZS-TMB-GUOUTL-622L (GUV In Left 622 Left)
|
|
[601] = "%1d", --PTR-LAZS-TMB-GUOUTL-622R (GUV In Left 622 Right)
|
|
[602] = "%1d", --PTR-LAZS-TMB-GUOUTR-622L (GUV In Right 622 Left)
|
|
[603] = "%1d", --PTR-LAZS-TMB-GUOUTR-622R (GUV In Rignt 622 Right)
|
|
|
|
[604] = "%1d", --PTR-LAZS-TMB-ES-800L (Electric Launch 800 Left)
|
|
[605] = "%1d", --PTR-LAZS-TMB-ES-622R (Electric Launch 800 Right)
|
|
[606] = "%1d", --PTR-LAZS-TMB-PKT (PKT)
|
|
[607] = "%1d", --PTR-LAZS-TMB-JETBOMB (Emergency Jettison)
|
|
[608] = "%1d", --PTR-LAZS-TMB-JETPWR (Power Jettison)
|
|
[609] = "%1d", --PTR-LAZS-TMB-JETEXPL (Emergency Jettison)
|
|
[610] = "%1d", --PTR-LAZS-TMB-JETRCKT (Alarm rockets)
|
|
|
|
[611] = "%1d", --PTR-RAZS-TMB-START-TRBON (CB APU start)
|
|
[612] = "%1d", --PTR-RAZS-TMB-START-TRBIGN (CB APU ignition)
|
|
[613] = "%1d", --PTR-RAZS-TMB-START-ENGON (CB Engine start)
|
|
[614] = "%1d", --PTR-RAZS-TMB-START-ENGIGN (CB Engine ignition)
|
|
[615] = "%1d", --PTR-RAZS-TMB-RPM (CB RPM CONTROL)
|
|
[616] = "%1d", --PTR-NONAME (CB NONAME)
|
|
[617] = "%1d", --PTR-SW-LOCKER-BASE (CB Lock Opening Control Main)
|
|
[618] = "%1d", --PTR-SW-LOCKER-RES (CB Lock Opening Control Reserve)
|
|
[619] = "%1d", --PTR-RAZS-TMB-TURN (CB TURN INDICATOR)
|
|
|
|
[629] = "%1d", --PTR-RAZS-TMB-TSCOCK-ON (CB Bypass)
|
|
[630] = "%1d", --PTR-RAZS-TMB-TSCOCK-L (CB Left valve)
|
|
[631] = "%1d", --PTR-RAZS-TMB-TSCOCK-R (CB Right valve)
|
|
[632] = "%1d", --PTR-RAZS-TMB-TSCOUNT (CB Fuelmeter)
|
|
[633] = "%1d", --PTR-RAZS-TMB-TSPMP-C (CB Center tank)
|
|
[634] = "%1d", --PTR-RAZS-TMB-TSPMP-L (CB Left pump)
|
|
[635] = "%1d", --PTR-RAZS-TMB-TSPMP-R (CB Right pump)
|
|
[636] = "%1d", --PTR-RAZS-TMB-T819 (CB T-819)
|
|
[637] = "%1d", --PTR-RAZS-TMB-SPPU52 (CB SPUU-52)
|
|
|
|
[647] = "%1d", --PTR-RAZS-TMB-HLGT-DIR-L (SPOT CONTROL LEFT)
|
|
[648] = "%1d", --PTR-RAZS-TMB-HLGT-ON-L (SPOT ON LEFT)
|
|
[649] = "%1d", --PTR-RAZS-TMB-HLGT-DIR-R (SPOT CONTROL RIGHT)
|
|
[650] = "%1d", --PTR-RAZS-TMB-HLGT-ON-R (SPOT ON RIGHT)
|
|
[651] = "%1d", --PTR-RAZS-TMB-ANO (ANO)
|
|
[652] = "%1d", --PTR-RAZS-TMB-WNGLGT (WING LIGHTS)
|
|
[653] = "%1d", --PTR-RAZS-TMB-LAMPTEST (CHECK LAMPS/FLASHER)
|
|
--[654] = "%1d", -- PTR-RAZS-TMB-DIRMAIN (LOCK MAIN)
|
|
--[655] = "%1d", -- PTR-RAZS-TMB-DIRDUB (LOCK SPARE)
|
|
[918] = "%1d", --PTR-SW-LIGHT-PRF4-LEFT (CB PRF-4 Light Left)
|
|
[919] = "%1d", --PTR-SW-LIGHT-PRF4-RIGHT (CB PRF-4 Light Right)
|
|
|
|
[620] = "%1d", --PTR-RAZS-TMB-APMAIN (CB Autopilot MAIN)
|
|
[621] = "%1d", --PTR-RAZS-TMB-APFRICT (CB Autopilot Frict)
|
|
[622] = "%1d", --PTR-RAZS-TMB-APELCT (CB Autopilot Clutch)
|
|
[623] = "%1d", --PTR-RAZS-TMB-GSMAIN (CB Hydro Main)
|
|
[624] = "%1d", --PTR-RAZS-TMB-GSDBL (CB Hydro Aux)
|
|
[625] = "%1d", --PTR-RAZS-TMB-RADSPU (CB SPU (Intercom))
|
|
[626] = "%1d", --PTR-RAZS-TMB-RADALT (CB Radio Altimeter)
|
|
[627] = "%1d", --PTR-RAZS-TMB-RADCOMM (CB Command Radio Station (R-863))
|
|
[628] = "%1d", --PTR-RAZS-TMB-RADRS (CB 6201)
|
|
|
|
[638] = "%1d", --PTR-RAZS-TMB-PPSSIGN (CB Signalization)
|
|
[639] = "%1d", --PTR-RAZS-TMB-PPSQUE1-L (CB 1 Queue Left)
|
|
[640] = "%1d", --PTR-RAZS-TMB-PPSQUE1-R (CB 1 Queue Right)
|
|
[641] = "%1d", --PTR-RAZS-TMB-PPSQUE2-L (CB 2 Queue Left)
|
|
[642] = "%1d", --PTR-RAZS-TMB-PPSQUE2-R (CB 2 Queue Right)
|
|
[643] = "%1d", --PTR-RAZS-TMB-RADCMP-SV (CB Radio Compass MW(ARC-9))
|
|
[644] = "%1d", --PTR-RAZS-TMB-RADCMP-UKV (CB Radio Compass VHF(ARC-UD))
|
|
[645] = "%1d", --PTR-RAZS-TMB-RADDISS (CB Doppler Navigator)
|
|
[646] = "%1d", --PTR-RAZS-TMB-RADRNTG (CB Radio Meter)
|
|
|
|
[656] = "%1d", --PTR-RAZS-TMB-POSDIR (CONTROL)
|
|
[657] = "%1d", --PTR-RAZS-TMB-POSPZUENG-L (LEFT ENGINE)
|
|
[658] = "%1d", --PTR-RAZS-TMB-POSPZUENG-R (RIGHT ENGINE)
|
|
[659] = "%1d", --PTR-RAZS-TMB-POSRIO3 (RIO-3)
|
|
[660] = "%1d", --PTR-RAZS-TMB-POSGLS (WINDOW)
|
|
[661] = "%1d", --PTR-RAZS-TMB-WIPER-L (LEFT ENGINE)
|
|
[662] = "%1d", --PTR-RAZS-TMB-WIPER-R (RIGHT ENGINE)
|
|
[663] = "%1d", --PTR-RAZS-TMB-L1800 (RIO-3)
|
|
[664] = "%1d", --PTR-RAZS-TMB-KO50 (WINDOW)
|
|
|
|
[882] = "%1d", --PTR-GRAZS-1 (CB Group 1)
|
|
[883] = "%1d", --PTR-GRAZS-2 (CB Group 4)
|
|
[884] = "%1d", --PTR-GRAZS-3 (CB Group 7)
|
|
[885] = "%1d", --PTR-GRAZS-4 (CB Group 2)
|
|
[886] = "%1d", --PTR-GRAZS-5 (CB Group 5)
|
|
[887] = "%1d", --PTR-GRAZS-6 (CB Group 8)
|
|
[888] = "%1d", --PTR-GRAZS-7 (CB Group 3)
|
|
[889] = "%1d", --PTR-GRAZS-8 (CB Group 6)
|
|
[890] = "%1d", --PTR-GRAZS-9 (CB Group 9)
|
|
-------------------------------------------------------------
|
|
-- FUELSYS INTERFACE
|
|
[438] = "%1d", --PTR-CPE-TMB-PUMP-RATE (Service tank pump)
|
|
[439] = "%1d", --PTR-CPE-TMB-PUMPTNK-L (Left fuel tank pump)
|
|
[440] = "%1d", --PTR-CPE-TMB-PUMPTNK-R (Right fuel tank pump)
|
|
[427] = "%1d", --PTR-CPE-TMB-PUMP-L (Left Engine Shutoff Valve)
|
|
[429] = "%1d", --PTR-CPE-TMB-PUMP-R (Right Engine Shutoff Valve)
|
|
[426] = "%1d", --PTR-CPE-CVR-PUMP-L (Left Engine Shutoff Valve Cover)
|
|
[428] = "%1d", --PTR-CPE-CVR-PUMP-R (Right Engine Shutoff Valve Cover)
|
|
[431] = "%1d", --PTR-CPE-TMB-PUMP-RING (Crossfeed)
|
|
[430] = "%1d", --PTR-CPE-CVR-PUMP-RING (Crossfeed Cover)
|
|
|
|
[433] = "%1d", --PTR-CPE-TMB-PUMP-PASS (Bypass)
|
|
[432] = "%1d", --PTR-CPE-CVR-PUMP-PASS (Bypass Cover)
|
|
[437] = "%.1f", --PTR-CPE-TMB-PUMP-CONTR (Refueling Control Switch)
|
|
-------------------------------------------------------------
|
|
-- ENGINE INTERFACE
|
|
[412] = "%1d", --PTR-CPE-TMB-TURBOSTART-ST (APU start mode)
|
|
[413] = "%1d", --PTR-CPE-BTN-TURBOSTART-ON (APU start)
|
|
[415] = "%1d", --PTR-CPE-BTN-TURBOSTART-OFF (APU stop)
|
|
|
|
[419] = "%1d", --PTR-CPE-BTN-ENGSTART-ON (Engine start ON)
|
|
[421] = "%1d", --PTR-CPE-BTN-ENGSTART-OFF (Engine start OFF)
|
|
[422] = "%1d", --PTR-CPE-TMB-ENGSTART-LFTRGT (Select engine)
|
|
[423] = "%1d", --PTR-CPE-TMB-ENGSTART-ROLL (Engine start mode)
|
|
[425] = "%1d", -- PTR-CPE-BTN-ENGSTART-TEST (Engine ignition check)
|
|
|
|
[204] = "%1d", --PTR-ENGSTOP-ARM-L (Left engine stop)
|
|
[206] = "%1d", --PTR-ENGSTOP-ARM-R (Right engine stop)
|
|
[208] = "%1d", --PTR-VINTBRAKE-ARM (Rotor brake)
|
|
|
|
[310] = "%1d", --PTR-LSPE-BTN-CONTR-IV500 (Vibration Sensor Test)
|
|
[311] = "%1d", --PTR-LSPE-BTN-CONTR-GRND (Temperature Sensor Test Cold)
|
|
[312] = "%1d", --PTR-LSPE-BTN-CONTR-AIR (Temperature Sensor Test Hot)
|
|
[313] = "%1d", --PTR-LSPE-BTN-CONTR-RTL (Temperature Regulator Test Left)
|
|
[314] = "%1d", --PTR-LSPE-BTN-CONTR-RTR (Temperature Regulator Test Right)
|
|
|
|
[202] = "%1d", --PTR-STKSGR-TMB-RPM-LEFT
|
|
[867] = "%1d", --PTR-STKSGR-TMB-RPM-RIGHT
|
|
--[0] = "%.4f", --PTR-STKSEC-ARM-L (Left Engine Throttle)
|
|
--[0] = "%.4f", --PTR-STKSEC-ARM-R (Right Engine Throttle)
|
|
--[0] = "%.4f", --PKT-TROTTLE_L (Left Collective / Throttle)
|
|
--[0] = "%.4f", --PKT-TROTTLE_R (Right Collective / Throttle)
|
|
|
|
[167] = "%1d", --PTR-APP-TMB-ERD-L (EEC Left)
|
|
[173] = "%1d", --PTR-APP-TMB-ERD-R (EEC Right)
|
|
[168] = "%1d", --PTR-APP-TMB-CHR-L (ER Left)
|
|
[172] = "%1d", --PTR-APP-TMB-CHR-R (ER Right)
|
|
[169] = "%1d", --PTR-APP-TMB-ST-L (FT Check Left)
|
|
[171] = "%1d", --PTR-APP-TMB-ST-R (FT Check Right)
|
|
[170] = "%1d", --PTR-APP-TMB-TKLR (CT check)
|
|
-------------------------------------------------------------
|
|
-- HYDRO SYS INTERFACE
|
|
[406] = "%1d", --PTR-CPE-TMB-HYDRO-MAIN (Main Hydro)
|
|
[410] = "%1d", --PTR-CPE-TMB-HYDRO-DBL (Aux Hydro)
|
|
[409] = "%1d", --PTR-CPE-CVR-HYDRO-DBL (Aux Hydro Cover)
|
|
[411] = "%1d", --PTR-CPE-BTN-DBLOFF (Aux Hydro Off)
|
|
-------------------------------------------------------------
|
|
-- AUTOPILOT
|
|
[134] = "%1d", --PTR-APP-BTN-DIRON (Autopilot Heading ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Button
|
|
[868] = "%.4f", --PTR-APP-BTN-DIRON (Autopilot Heading ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Axis
|
|
[135] = "%1d", --PTR-APP-BTN-DIROFF (Autopilot Heading OFF/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Button
|
|
[869] = "%.4f", --PTR-APP-BTN-DIROFF (Autopilot Heading OFF/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Axis
|
|
|
|
[138] = "%1d", --PTR-APP-BTN-KTON (Autopilot Pitch/Roll ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Button
|
|
[870] = "%.4f", --PTR-APP-BTN-KTON (Autopilot Pitch/Roll ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Axis
|
|
[144] = "%1d", --PTR-APP-BTN-ALTON (Autopilot Altitude ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Button
|
|
[871] = "%.4f", --PTR-APP-BTN-ALTON (Autopilot Altitude ON/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Axis
|
|
[145] = "%1d", --PTR-APP-BTN-ALTOFF (Autopilot Altitude OFF/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Button
|
|
[872] = "%.4f", --PTR-APP-BTN-ALTOFF (Autopilot Altitude OFF/Lamp Intensity. Rotate mouse wheel to set lamp intensity), Axis
|
|
|
|
[146] = "%1d", --PTR-APP-BTN-CONTR (Autopilot Altitude Channel Control)
|
|
|
|
[136] = "%.4f", --PTR-APP-LVR-DIR (Autopilot Heading Adjustment)
|
|
[140] = "%.4f", --PTR-APP-LVR-K (Autopilot Roll Adjustment)
|
|
[142] = "%.4f", --PTR-APP-LVR-T (Autopilot Pitch Adjustment)
|
|
|
|
[183] = "%1d", --PTR-AUTOPILOT-OFF-L (Autopilot Off Left Button)
|
|
[226] = "%1d", --PTR-AUTOPILOT-OFF-R (Autopilot Off Right Button)
|
|
-------------------------------------------------------------
|
|
-- RADAR ALTIMETER
|
|
[32] = "%1d", --PTR-ALTR-LVR-TEST (Radio altimeter test)
|
|
[29] = "%.4f", --PTR-ALTR-LVR-SET (Dangerous RALT set rotary) {0, 1}
|
|
[35] = "%1d", --PTR-ALTR-TMB-ONOFF (Radar Altimeter Power)
|
|
-------------------------------------------------------------
|
|
-- BAR ALTIMETER
|
|
[18] = "%.4f", --PTR-ALTB-LVR-SET (Baro pressure QFE knob)
|
|
[97] = "%.4f", --PTR-ALTB-LVR-SET-R (Baro pressure QFE knob)
|
|
-------------------------------------------------------------
|
|
-- VARIOMETER
|
|
[17] = "%.4f", --PTR-VARIO-LVR-SET-L (Variometer adjustment knob)
|
|
[96] = "%.4f", --PTR-VARIO-LVR-SET-R (Variometer adjustment knob)
|
|
-------------------------------------------------------------
|
|
--HSI
|
|
[26] = "%.4f", --PTR-PNP-LVR-SET (HSI Course set knob)
|
|
[858] = "%1d", --PTR-ARKSV-ARKUKV (HSI ARC-9/ARC-UD Select)
|
|
|
|
[102] = "%.4f", --PTR-PNP-LVR-SET-R (HSI Course set knob)
|
|
-------------------------------------------------------------
|
|
-- FUELSYS INTERFACE
|
|
[61] = "%.1f", --PTR-FUEL-LVR-MODE (Fuel meter switch)
|
|
-------------------------------------------------------------
|
|
-- WEAPON SYS
|
|
[921] = "%1d", --PTR-SAFE-WEAPON (Weapon Safe-Armed)
|
|
[707] = "%1d", --PTR-ADDPBV-TMB-EMRGEXP (Emergency Explode)
|
|
[706] = "%1d", --PTR-ADDPBV-CVR-EMRGEXP (Emergency Explode Cover)
|
|
|
|
[709] = "%1d", --PTR-ADDPBV-TMB-EMRGJET (Emergency Release)
|
|
[708] = "%1d", --PTR-ADDPBV-CVR-EMRGJET (Emergency Release Cover)
|
|
|
|
[717] = "%1d", --PTR-ADDPBV-TMB-MAINOFF (Main Bombs)
|
|
[718] = "%1d", --PTR-ADDPBV-BTN-LAMPTEST (Lamps Check)
|
|
|
|
[719] = "%.1f", --PTR-ADDPBV-LVR-MODE (Pod Variants)
|
|
[720] = "%1d", --PTR-ADDPBV-TMB-WARM (ESBR Heat)
|
|
|
|
[730] = "%.4f", --PTR-ADDESBR-LVR-MODE (ESBR Position)
|
|
[731] = "%1d", --PTR-ADDESBR-LVR-ONOFF (ESBR On/Off)
|
|
|
|
[570] = "%1d", --PTR-LAZS-TMB-EMRGEXP (Emergency Explode)
|
|
[572] = "%1d", --PTR-LAZS-TMB-EMRGJET (Emergency Release)
|
|
[569] = "%1d", --PTR-LAZS-CVR-EMRGEXP (Emergency Explode Cover)
|
|
[571] = "%1d", --PTR-LAZS-CVR-EMRGJET (Emergency Release Cover)
|
|
|
|
--[573] = "%1d", -- PTR-LAZS-TMB-MAINOFF (Main On/Off)
|
|
[575] = "%1d", --PTR-LAZS-TMB-RSGUV (RS/GUV Selector)
|
|
[576] = "%1d", --PTR-LAZS-BTN-LAMPTEST (Lamps Check)
|
|
[574] = "%1d", --PTR-LAZS-BTN-ENTER (PUS Arming)
|
|
|
|
[342] = "%1d", --PTR-LPE-TMB-SHOOT1 (8/16/4)
|
|
[343] = "%1d", --PTR-LPE-TMB-SHOOT2 (1256/AUTO/34)
|
|
[344] = "%1d", --PTR-LPE-TMB-RS (UPK/PKT/RS)
|
|
[345] = "%1d", --PTR-LPE-TMB-GUV (CUTOFF)
|
|
[349] = "%1d", --PTR-LAZS-TMB-MAINOFF05 (800_or_624_622_800)
|
|
[348] = "%1d", --PTR-LAZS-CVR-EMRGEXP01 (800 or 624_622_800 Cover)
|
|
|
|
[347] = "%.4f", --PTR-LPE-TMB-VAR (In800Out/800inOr624/622)
|
|
|
|
[346] = "%.4f", --PTR-LPE-LVR-SHELL (Burst length)
|
|
|
|
[350] = "%.4f", --PTR-LPE-TMB-PYRO-L (PYROCARTRIDGE Left)
|
|
[351] = "%.4f", --PTR-LPE-TMB-PYRO-R (PYROCARTRIDGE Right)
|
|
|
|
[573] = "%1d", --PTR-LAZS-TMB-MAINOFF (Mine Arms Main Switch)
|
|
[905] = "%1d", --PTR-RSPE-TMB-PKT (PKT Selector Switch)
|
|
-------------------------------------------------------------
|
|
-- SYS CONTROLLER
|
|
[523] = "%1d", --PTR-RSPE-TMB-WINK (FLASHER)
|
|
[525] = "%1d", --PTR-RSPE-TMB-TAB (Transparent Day/Night)
|
|
[150] = "%1d", --PTR-APP-TMB-TEST (CHECK LAMPS/FLASHER)
|
|
-------------------------------------------------------------
|
|
-- SPUU-52
|
|
[332] = "%1d", --PTR-LES-TMB-SPPU52 (SPUU-52 Power)
|
|
[127] = "%1d", --PTR-APP-BTN-OFF (SPUU-52 Control Engage)
|
|
[129] = "%1d", --PTR-APP-TMB-RT (SPUU-52 Control (Left button - P. Right button - t))
|
|
[128] = "%.4f", --PTR-APP-LVR-ADJ (SPUU 52 Control Adjustment)
|
|
-------------------------------------------------------------
|
|
-- FIRE EXTING INTERFACE
|
|
[389] = "%1d", --PTR-CPE-BTN-QUE1-1 (Main Discharge L ENG)
|
|
[390] = "%1d", --PTR-CPE-BTN-QUE1-2 (Main Discharge R ENG)
|
|
[391] = "%1d", --PTR-CPE-BTN-QUE1-3 (Main Discharge KO-50)
|
|
[392] = "%1d", --PTR-CPE-BTN-QUE1-4 (Main Discharge APU GEAR)
|
|
[393] = "%1d", --PTR-CPE-BTN-QUE2-1 (Alternate Discharge L ENG)
|
|
[394] = "%1d", --PTR-CPE-BTN-QUE2-2 (Alternate Discharge R ENG)
|
|
[395] = "%1d", --PTR-CPE-BTN-QUE2-3 (Alternate Discharge KO-50)
|
|
[396] = "%1d", --PTR-CPE-BTN-QUE2-4 (Alternate Discharge APU GEAR)
|
|
[397] = "%1d", --PTR-CPE-BTN-FIRE-OFF (Turn Off Fire Signal)
|
|
|
|
[399] = "%1d", --PTR-CPE-TMB-CONTR-FIRE (Fire Detector Test)
|
|
[400] = "%1d", --PTR-CPE-TMB-CONTR-PYRO (Squib Test)
|
|
[401] = "%.1f", --PTR-CPE-LVR-CONTR-MODE (Check Fire circuits)
|
|
-------------------------------------------------------------
|
|
-- ENGINE INTERFACE
|
|
[353] = "%1d", --PTR-LPE-TMB-MANAUT (AUTO-MANUAL)
|
|
[354] = "%1d", --PTR-LPE-BTN-OVR (GENERAL OFF)
|
|
[355] = "%1d", --PTR-LPE-TMB-PZU-L (LEFT ENGINE)
|
|
[356] = "%1d", --PTR-LPE-TMB-PZU-R (RIGHT ENGINE)
|
|
[357] = "%1d", --PTR-LPE-TMB-GLASS (WINDOW)
|
|
[358] = "%1d", --PTR-LPE-TMB-RIO (Ice Detector Heater)
|
|
[359] = "%1d", --PTR-LPE-BTN-RIOCONTR (Ice Detector Heater Test)
|
|
[372] = "%.1f", --PTR-LPE-LVR-FEEDMODE (Anti Ice Sections Current)
|
|
|
|
[519] = "%1d", --PTR-RSPE-TMB-WRMPVD-L (Left Pitot Heater)
|
|
[520] = "%1d", --PTR-RSPE-TMB-WRMPVD-R (Right Pitot Heater)
|
|
[339] = "%1d", --PTR-LES-BTN-CONTRPVD (Left Pitot Heater Control)
|
|
[482] = "%1d", --PTR-LES-BTN-CONTRPVD01 (Right Pitot Heater Control)
|
|
-------------------------------------------------------------
|
|
-- DISS 15
|
|
[483] = "%1d", --PTR-RES-TMB-DISS (Doppler Navigator, Power)
|
|
[818] = "%1d", --PTR-DISS-BTN-OFF (Turn Off Coordinates Calculator)
|
|
[819] = "%1d", --PTR-DISS-BTN-ON (Turn On Coordinates Calculator)
|
|
[815] = "%1d", --PTR-DISS-BTN-MINUS (Decrease Map Angle)
|
|
[816] = "%1d", --PTR-DISS-BTN-PLUS (Increase Map Angle)
|
|
[809] = "%1d", --PTR-DISS-BTN-N (Decrease Path KM)
|
|
[810] = "%1d", --PTR-DISS-BTN-V (Increase Path KM)
|
|
[803] = "%1d", --PTR-DISS-BTN-TOLE (Decrease Deviation KM)
|
|
[804] = "%1d", --PTR-DISS-BTN-TORI (Increase Deviation KM)
|
|
[826] = "%.1f", --PTR-IND-DISS-SELECTOR (Mode Switch)
|
|
[797] = "%1d", --PTR-DISS-SELECTOR-KR (Test/Work)
|
|
[798] = "%1d", --PTR-DISS-SELECTOR-SM (Land/Sea)
|
|
-------------------------------------------------------------
|
|
-- ADI
|
|
[487] = "%1d", --PTR-RES-TMB-AG (Right Attitude Indicator Power)
|
|
[335] = "%1d", --PTR-LES-TMB-AG (Left Attitude Indicator Power)
|
|
[11] = "%1d", --PTR-AGB-LVR-KNOB (Left Attitude Indicator Cage)
|
|
[10] = "%.4f", --PTR-AGB-LVR-SET (Left Attitude Indicator Zero pitch trim)
|
|
[90] = "%1d", --PTR-AGB-LVR-KNOB-R (Right Attitude Indicator Cage)
|
|
[89] = "%.4f", --PTR-AGB-LVR-SET-R (Right Attitude Indicator Zero pitch trim)
|
|
-------------------------------------------------------------
|
|
--
|
|
[336] = "%1d", --PTR-LES-TMB-VK53 (VK-53, Power)
|
|
-------------------------------------------------------------
|
|
-- GMK1A
|
|
[485] = "%1d", --PTR-RES-TMB-GMK (GMC Power)
|
|
[470] = "%1d", --PTR-RPE-LVR-CRDNS (GMC Hemisphere Selection)
|
|
[472] = "%1d", --PTR-RPE-LVR-CRDMK (GMC Mode (MC, DG, AC(N/F)))
|
|
[476] = "%.1f", --PTR-RPE-LVR-CRDCONTR (GMC Control (Left - 0, Right - 300)) {-1.0,0.0,1.0}
|
|
[477] = "%.1f", --PTR-RPE-LVR-CRDZK (GMC Course Setting (Left - CCW, Right - CW)) {-1.0,0.0,1.0}
|
|
[474] = "%.4f", --PTR-RPE-LVR-CRDLAT (GMC Latitude Selection)
|
|
-------------------------------------------------------------
|
|
-- ENGINE INTERFACE
|
|
[517] = "%1d", --PTR-RSPE-TMB-PZUENG-L (Dust Protection Left)
|
|
[518] = "%1d", --PTR-RSPE-TMB-PZUENG-R (Dust Protection Right)
|
|
-------------------------------------------------------------
|
|
-- Nav Lights System
|
|
[513] = "%1d", --PTR-RSPE-TMB-ANO (ANO)
|
|
[514] = "%1d", --PTR-RSPE-TMB-LGTWING (Formation Lights)
|
|
[515] = "%1d", --PTR-RSPE-TMB-LGTCONT (Tip Lights)
|
|
[516] = "%1d", --PTR-RSPE-TMB-BEAC (Strobe Light)
|
|
[322] = "%1d", --PTR-LSPE-TMB-AIR-CODE (ANO code)
|
|
[836] = "%1d", --PTR-LEFT-TAXI-L-SW (Taxi Light)
|
|
[837] = "%1d", --PTR-LEFT-TAXI-L-POS-SW (Left Landing Light)
|
|
[838] = "%1d", --PTR-LEFT-TAXI-R-POS-SW (Right Landing Light)
|
|
-------------------------------------------------------------
|
|
-- Lights System
|
|
[333] = "%1d", --PTR-LES-TMB-PLF (Left Ceiling Light)
|
|
[489] = "%1d", --PTR-RES-TMB-PLF (Right Ceiling Light)
|
|
[479] = "%1d", --PTR-RES-TMB-LGT (5.5V Lights)
|
|
[280] = "%.4f", --PTR-LSPE-LVR-REDGRP1 (Lh RedLights Brightness Rst gr.1) {0.0, 1.0}
|
|
[281] = "%.4f", --PTR-LSPE-LVR-REDGRP2 (Lh RedLights Brightness Rst gr.2) {0.0, 1.0}
|
|
[491] = "%.4f", --PTR-RSPE-LVR-REDGRP1 (Rh RedLights Brightness Rst gr.1) {0.0, 1.0}
|
|
[492] = "%.4f", --PTR-RSPE-LVR-REDGRP2 (Rh RedLights Brightness Rst gr.2) {0.0, 1.0}
|
|
[894] = "%.4f", --PTR-RSPE-LVR-REDGRP003 (Central RedLights Brightness Rst gr.1) {0.0, 1.0}
|
|
[895] = "%.4f", --PTR-RSPE-LVR-REDGRP004 (Central RedLights Brightness Rst gr.2) {0.0, 1.0}
|
|
[914] = "%.4f", --PTR-RSPE-LVR-REDGRP005 (5.5V Lights Brightness Rheostat)
|
|
[511] = "%1d", --PTR-RSPE-TMB-DUTY (Cargo Cabin Duty Lights Switc)
|
|
[512] = "%1d", --PTR-RSPE-TMB-ALL (Cargo Cabin Common Lights Switch)
|
|
-------------------------------------------------
|
|
-- RADIO EQUIPMENT
|
|
-- SPU-7
|
|
-- Left
|
|
[549] = "%.4f", --PTR-LAZS-LVR-ALL (Common Volume)
|
|
[548] = "%.4f", --PTR-LAZS-LVR-AUDIT (Listening Volume)
|
|
[553] = "%1d", --PTR-LAZS-TMB-RADSPU (Radio/ICS)
|
|
[551] = "%1d", --PTR-LAZS-TMB-CIRC (Network 1/2 (N/F))
|
|
[552] = "%1d", --PTR-LAZS-BTN-CB (Circular Call (N/F))
|
|
[550] = "%.1f", --PTR-LAZS-LVR-MODES (Radio Source (R-863/JADRO-1A/R-828/NF/ARC-9/ARC-UD))
|
|
-- Right
|
|
[841] = "%.4f", --PTR-RAZS-LVR-ALL002 (Common Volume)
|
|
[840] = "%.4f", --PTR-RAZS-LVR-AUDIT002 (Listening Volume)
|
|
[845] = "%1d", --PTR-RAZS-TMB-RADSPU002 (Radio/ICS)
|
|
[843] = "%1d", --PTR-RAZS-TMB-CIRC002 (Network 1/2 (N/F))
|
|
[846] = "%1d", --PTR-RAZS-BTN-CB002 (Circular Call (N/F))
|
|
[842] = "%.1f", --PTR-RAZS-LVR-MODES002 (Radio Source (R-863/JADRO-1A/R-828/NF/ARC-9/ARC-UD))
|
|
|
|
--[194] = "%.4f", -- RADIO/ICS-1-PTR (Radio/ICS)
|
|
[480] = "%1d", --PTR-RES-TMB-LARING (Laryngophone)
|
|
-------------------------------------------------------------
|
|
-- R-863
|
|
[369] = "%1d", --PTR-LPE-TMB-COMAND (R-863, Select FM/AM)
|
|
[132] = "%1d", --PTR-APP-TMB-NU (R-863, Dial/Memory Unit)
|
|
[370] = "%1d", --PTR-LPE-LVR-CHANNEL (R-863, Radio channel selector)
|
|
|
|
[155] = "%1d", --PTR-APP-TMB-PS (R-863, Squelch)
|
|
[156] = "%.4f", --PTR-APP-LVR-LEVEL (R-863, Volume)
|
|
|
|
[163] = "%.4f", --PTR-APP-LVR-SEL1 (R-863, 10MHz rotary) {-0.1, 0.1}
|
|
[164] = "%.4f", --PTR-APP-LVR-SEL2 (R-863, 1MHz rotary) {-0.1, 0.1}
|
|
[165] = "%.4f", --PTR-APP-LVR-SEL3 (R-863, 100kHz rotary) {-0.1, 0.1}
|
|
[166] = "%.4f", --PTR-APP-LVR-SEL4 (R-863, 1kHz rotary) {-0.1, 0.1}
|
|
|
|
[153] = "%1d", --PTR-APP-TMB-AP (R-863, Emergency Receiver On/Off (N/F))
|
|
[154] = "%1d", --PTR-APP-TMB-RK (R-863, ARC (N/F))
|
|
-------------------------------------------------------------
|
|
-- R-828
|
|
[735] = "%1d", --PTR-ADDSECPLT-LVR-CHNL (R-828 Radio channel selector)
|
|
|
|
[737] = "%.4f", --PTR-ADDSECPLT-LVR-VOL (R-828 Radio volume)
|
|
[738] = "%1d", --PTR-ADDSECPLT-BTN-ASU (R-828 Radio Tuner button)
|
|
[739] = "%1d", --PTR-ADDSECPLT-TMB-PSH (R-828 Radio Squelch)
|
|
[756] = "%1d", --PTR-ADDSECPLT-TMB-P828 (R-828 Radio, Power)
|
|
[757] = "%1d", --PTR-ADDSECPLT-TMB-MODSEL (R-828 Radio, COMM/NAV)
|
|
-------------------------------------------------------------
|
|
-- Jadro-1A
|
|
[484] = "%1d", --PTR-RES-TMB-RS (Jadro 1A, Power)
|
|
[745] = "%.4f", --PTR-ADDSECPLT-LVR-DIG12 (Jadro 1A, Frequency Selector, 1MHz) {-0.1, 0.1}
|
|
[746] = "%.4f", --PTR-ADDSECPLT-LVR-DIG3 (Jadro 1A, Frequency Selector, 100kHz) {-0.1, 0.1}
|
|
[747] = "%.4f", --PTR-ADDSECPLT-LVR-DIG4 (Jadro 1A, Frequency Selector, 10kHz) {-0.1, 0.1}
|
|
|
|
[748] = "%.4f", --PTR-ADDSECPLT-LVR-DIG6 (Jadro 1A, Frequency Selector, Left mouse - 1kHz/ Right mouse - 100Hz)
|
|
[749] = "%.4f", --PTR-ADDSECPLT-LVR-DIG6 (Jadro 1A, Frequency Selector, Left mouse - 1kHz/ Right mouse - 100Hz)
|
|
|
|
[744] = "%.1f", --PTR-ADDSECPLT-LVR-ONOFF (Jadro 1A, Mode OFF/OM/AM)
|
|
|
|
[743] = "%.4f", --PTR-ADDSECPLT-LVR-VOLUM (Jadro 1A, Volume)
|
|
[741] = "%.4f", --PTR-ADDSECPLT-LVR-PSH (Jadro 1A, Squelch)
|
|
[742] = "%1d", --PTR-ADDSECPLT-TMB-CONTR (Jadro 1A, Control)
|
|
-------------------------------------------------------------
|
|
-- RI-65
|
|
[338] = "%1d", --PTR-LES-TMB-RK85 (RI-65)
|
|
[292] = "%1d", --PTR-LSPE-BTN-RI65-OFF (RI-65 OFF)
|
|
[293] = "%1d", --PTR-LSPE-BTN-RI65-RETRY (RI-65 Repeat)
|
|
[294] = "%1d", --PTR-LSPE-BTN-RI65-TEST (RI-65 Check)
|
|
[295] = "%1d", --PTR-LSPE-TMB-RI65-AMP (RI-65 Amplifier)
|
|
-------------------------------------------------------------
|
|
-- ARC-UD
|
|
[456] = "%.1f", --PTR-RPE-LVR-ARKMODE (ARC-UD, Mode OFF/NARROW/WIDE/PULSE/RC)
|
|
[457] = "%.1f", --PTR-RPE-LVR-ARKMODE2 (ARC-UD, Channel)
|
|
|
|
[453] = "%1d", --PTR-RPE-TMB-ARKSENS (ARC-UD, Sensitivity)
|
|
[454] = "%1d", --PTR-RPE-TMB-ARKUKV (ARC-UD, MW/DW)
|
|
|
|
[672] = "%1d", --PTR-RPE-BTN-CONTR (ARC-UD, Control)
|
|
[673] = "%1d", --PTR-RPE-BTN-ANTL (ARC-UD, Ant. Left)
|
|
[674] = "%1d", --PTR-RPE-BTN-ANTR (ARC-UD, Ant. Right)
|
|
|
|
[455] = "%.4f", --PTR-RPE-LVR-ARKVOL (ARC-UD, Volume)
|
|
[481] = "%1d", --PTR-RES-TMB-BLOCK (ARC-UD, Lock Switch)
|
|
-------------------------------------------------------------
|
|
-- PKV Sight
|
|
[589] = "%.4f", --PTR-LAZS-LVR-AIMLGT (Sight Brightness)
|
|
|
|
[855] = "%.4f", --PTR-PKV-ROTARY (Sight Limb)
|
|
|
|
[856] = "%.4f", --PTR-PKV-DOUBLE (Sight Double) {1.0,-1.0}
|
|
|
|
[903] = "%.1f", --PTR-PKV-GLASS-FILTER (PKV Filter)
|
|
--------------------------------------------------------------------------------
|
|
-- CLOCK
|
|
[57] = "%1d", --PTR-WATCH-LVR-L (Mech clock left lever)
|
|
[58] = "%1d", --PTR-WATCH-LVR-L (Mech clock left lever)
|
|
|
|
[59] = "%1d", --PTR-WATCH-LVR-R (Mech clock right lever)
|
|
[60] = "%1d", --PTR-WATCH-LVR-R (Mech clock right lever)
|
|
|
|
[521] = "%1d", --PTR-RSPE-TMB-WRMWTCH (Clock Heating Switch)
|
|
--------------------------------------------------------------------------------
|
|
[839] = "%.1f", --PTR-STAT-PRESS (Static Pressure System Mode (LEFT/COMMON/RIGHT))
|
|
--------------------------------------------------------------------------------
|
|
-- UV-26 CMD Control Panel
|
|
[910] = "%1d", --PTR-UV26-ONOFF (CMD Power)
|
|
[859] = "%1d", --PTR-UV26-BOARD (CMD Select Left/Both/Right board flares dispensers)
|
|
[913] = "%1d", --PTR-UV26-PROG (CMD Amount flares counter/Programming)
|
|
[914] = "%1d", --PTR-L45-BTN (CMD Num of sequences)
|
|
[862] = "%1d", --PTR-L68-BTN (CMD Dispense interval)
|
|
[863] = "%1d", --PTR-L8-BTN (CMD Num in sequence)
|
|
[866] = "%1d", --PTR-START-BTN (CMD Start dispense)
|
|
[911] = "%1d", --PTR-LSPE-BTN-UV26-START (Start/Stop dispense)
|
|
[864] = "%1d", --PTR-RESET-PROG-BTN (CMD Reset to default program)
|
|
[865] = "%1d", --PTR-STOP-BTN (CMD Stop dispense)
|
|
------------------------------------------------
|
|
-- CPTMECH
|
|
[215] = "%1d", --PTR-BLISTER-LOCK-L (Left blister open/close)
|
|
[216] = "%1d", --PTR-BLISTER-LOCK-R (Right blister open/close)
|
|
|
|
[881] = "%1d", --PTR-WHEELBRK-ARM (Wheel Brakes)
|
|
|
|
[910] = "%1d", --PTR-RSPE-TMB-WINK002 (Acceleration Reset)
|
|
|
|
[334] = "%1d", --PTR-LES-TMB-VENT (Left Fan Switch)
|
|
[488] = "%1d", --PTR-RES-TMB-VENT (Right Fan Switch)
|
|
------------------------------------------------
|
|
-- ARC-9
|
|
[469] = "%1d", --PTR-RPE-TMB-NEARFAR (ARC-9, Main/Backup Dialer)
|
|
[448] = "%.4f", --PTR-RPE-LVR-FRQVOLUME (ARC-9, Volume)
|
|
[444] = "%1d", --PTR-RPE-TMB-FRQTLG (ARC-9, TLF/TLG)
|
|
[446] = "%.1f", --PTR-RPE-LVR-FRQMODE (ARC-9, Mode OFF/COMP/ANT/LOOP)
|
|
[447] = "$.1f", --PTR-RPE-TMB-FRQFRAME (ARC-9, Loop Left/Right)
|
|
|
|
[449] = "%.4f", --PTR-RPE-LVR-FRQADJRES (ARC-9, Backup Frequency Tune)
|
|
[675] = "%.2f", --PTR-RPE-LVR-FRQRES-SEC (ARC-9, Backup 100kHz rotary)
|
|
[450] = "%.2f", --PTR-RPE-LVR-FRQRES (ARC-9, Backup 10kHz rotary)
|
|
[451] = "%.4f", --PTR-RPE-LVR-FRQADJMAIN (ARC-9, Main Frequency Tune)
|
|
[678] = "%.2f", --PTR-RPE-LVR-FRQMAIN-SEC (ARC-9, Main 100kHz rotary)
|
|
[452] = "%.2f", --PTR-RPE-LVR-FRQMAIN (ARC-9, Main 10kHz rotary)
|
|
------------------------------------------------
|
|
-- External Cargo Equipment
|
|
[199] = "%1d", --PTR-STKSG-CVR-TACTJET (Tactical Cargo Release Button Cover)
|
|
[200] = "%1d", --PTR-STKSG-BTN-TACTJET (Tactical Cargo Release Button - Push to release)
|
|
[197] = "%1d", --PTR-STKSG-CVR-EMRGJET (Emergency Cargo Release Button Cover)
|
|
[198] = "%1d", --PTR-STKSG-BTN-EMRGJET (Emergency Cargo Release Button - Push to release)
|
|
[324] = "%1d", --PTR-LSPE-TMB-BRK-OUT (External Cargo Automatic Dropping)
|
|
------------------------------------------------
|
|
-- Signal Flares
|
|
[282] = "%1d", --PTR-LSPE-TMB-ALRMRKT1 (Signal Flares Cassette 1 Power Switch)
|
|
[283] = "%1d", --PTR-LSPE-TMB-ALRMRKT2 (Signal Flares Cassette 2 Power Switch)
|
|
[284] = "%1d", --PTR-LSPE-BTN-RCKT11 (Signal Flares Cassette 1 Launch Red Button)
|
|
[285] = "%1d", --PTR-LSPE-BTN-RCKT12 (Signal Flares Cassette 1 Launch Green Button)
|
|
[286] = "%1d", --PTR-LSPE-BTN-RCKT13 (Signal Flares Cassette 1 Launch Yellow Button)
|
|
[287] = "%1d", --PTR-LSPE-BTN-RCKT14 (Signal Flares Cassette 1 Launch White Button)
|
|
[288] = "%1d", --PTR-LSPE-BTN-RCKT21 (Signal Flares Cassette 2 Launch Red Button)
|
|
[289] = "%1d", --PTR-LSPE-BTN-RCKT22 (Signal Flares Cassette 2 Launch Green Button)
|
|
[290] = "%1d", --PTR-LSPE-BTN-RCKT23 (Signal Flares Cassette 2 Launch Yellow Button)
|
|
[291] = "%1d", --PTR-LSPE-BTN-RCKT24 (Signal Flares Cassette 2 Launch White Button)
|
|
------------------------------------------------
|
|
-- SARPP
|
|
[315] = "%1d", --PTR-LSPE-TMB-CONTR-AUTMAN (SARPP-12 Mode Switch,)
|
|
------------------------------------------------
|
|
-- Recorder P-503B
|
|
[305] = "%1d", --PTR-LSPE-TMB-REC (Recorder P-503B Power Switch)
|
|
[308] = "%.4f", --PTR-LSPE-LVR-LGTSEL (Recorder P-503B Backlight Brightness Knob)
|
|
------------------------------------------------
|
|
-- IFF
|
|
[304] = "%1d", --"PTR-LSPE-LVR-MODE (IFF Transponder Mode Selector Switch)
|
|
[301] = "%1d", --PTR-LSPE-TMB-RADIO-WRK (IFF Transponder Device Selector Switch)
|
|
[300] = "%1d", --PTR-LSPE-TMB-RADIO-MODE12 (IFF Transponder Device Mode Switch)
|
|
[296] = "%1d", --PTR-LSPE-CVR-EMRG-ERASE (IFF Transponder Erase Button Cover)
|
|
[297] = "%1d", --PTR-LSPE-BTN-EMRG-ERASE (IFF Transponder Erase Button)
|
|
[298] = "%1d", --PTR-LSPE-CVR-EMRG-MAYDAY (IFF Transponder Disaster Switch Cover)
|
|
[299] = "%1d", --PTR-LSPE-TMB-EMRG-MAYDAY (IFF Transponder Disaster Switch)
|
|
------------------------------------------------
|
|
-- jump descent siren
|
|
[323] = "%1d", --PTR-LSPE-TMB-AIR-SIREN (Alarm Bell Button)
|
|
------------------------------------------------
|
|
[352] = "%1d", --PTR-LPE-TMB-FKP (Gun Camera Switch, ON/OFF)
|
|
------------------------------------------------
|
|
-- Windshield Wiper
|
|
[331] = "%.1f", --PTR-LES-TMB-GLSCLN (Left Windscreen Wiper Control Switch, OFF, START, RESET, SPEED 1, SPEED 2) {0.0,0.1,0.2,0.3,0.4}
|
|
[478] = "%.1f", --PTR-RES-TMB-GLSCLN (Right Windscreen Wiper Control Switch, OFF, START, RESET, SPEED 1, SPEED 2) {0.0,0.1,0.2,0.3,0.4}
|
|
}
|
|
|
|
-----------------------------
|
|
-- HIGH IMPORTANCE EXPORTS --
|
|
-- done every export event --
|
|
-----------------------------
|
|
|
|
-- Pointed to by ProcessIkarusDCSHighImportance
|
|
function ExportScript.ProcessIkarusDCSConfigHighImportance(mainPanelDevice)
|
|
--[[
|
|
every frame export to Ikarus
|
|
Example from A-10C
|
|
Get Radio Frequencies
|
|
get data from device
|
|
local lUHFRadio = GetDevice(54)
|
|
ExportScript.Tools.SendData("ExportID", "Format")
|
|
ExportScript.Tools.SendData(2000, string.format("%7.3f", lUHFRadio:get_frequency()/1000000)) -- <- special function for get frequency data
|
|
ExportScript.Tools.SendData(2000, ExportScript.Tools.RoundFreqeuncy((UHF_RADIO:get_frequency()/1000000))) -- ExportScript.Tools.RoundFreqeuncy(frequency (MHz|KHz), format ("7.3"), PrefixZeros (false), LeastValue (0.025))
|
|
]]
|
|
|
|
--[12] = "%.4f", -- AGB_3K_Left_pitch {1.0, -1.0}
|
|
--[91] = "%.4f", -- AGB_3K_Right_pitch {1.0, -1.0}
|
|
ExportScript.Tools.SendData(12, string.format("%.4f", ExportScript.Tools.negate(mainPanelDevice:get_argument_value(12)))) -- negate
|
|
|
|
ExportScript.Tools.SendData(91, string.format("%.4f", ExportScript.Tools.negate(mainPanelDevice:get_argument_value(91)))) -- negate
|
|
|
|
--[21] = "%.4f", -- VD_10K_L_PRESS {0.0, 1.0}
|
|
ExportScript.Tools.SendData(21, string.format("%.4f", ExportScript.Tools.negate(mainPanelDevice:get_argument_value(21)))) -- negate
|
|
end
|
|
|
|
function ExportScript.ProcessDACConfigHighImportance(mainPanelDevice)
|
|
--[[
|
|
every frame export to DAC
|
|
Example from A-10C
|
|
Get Radio Frequencies
|
|
get data from device
|
|
local UHF_RADIO = GetDevice(54)
|
|
ExportScript.Tools.SendDataDAC("ExportID", "Format")
|
|
ExportScript.Tools.SendDataDAC("ExportID", "Format", HardwareConfigID)
|
|
ExportScript.Tools.SendDataDAC("2000", string.format("%7.3f", UHF_RADIO:get_frequency()/1000000))
|
|
ExportScript.Tools.SendDataDAC("2000", ExportScript.Tools.RoundFreqeuncy((UHF_RADIO:get_frequency()/1000000))) -- ExportScript.Tools.RoundFreqeuncy(frequency (MHz|KHz), format ("7.3"), PrefixZeros (false), LeastValue (0.025))
|
|
]]
|
|
end
|
|
|
|
-----------------------------------------------------
|
|
-- LOW IMPORTANCE EXPORTS --
|
|
-- done every gExportLowTickInterval export events --
|
|
-----------------------------------------------------
|
|
|
|
-- Pointed to by ExportScript.ProcessIkarusDCSConfigLowImportance
|
|
function ExportScript.ProcessIkarusDCSConfigLowImportance(mainPanelDevice)
|
|
--[[
|
|
export in low tick interval to Ikarus
|
|
Example from A-10C
|
|
Get Radio Frequencies
|
|
get data from device
|
|
local lUHFRadio = GetDevice(54)
|
|
ExportScript.Tools.SendData("ExportID", "Format")
|
|
ExportScript.Tools.SendData(2000, string.format("%7.3f", lUHFRadio:get_frequency()/1000000)) -- <- special function for get frequency data
|
|
ExportScript.Tools.SendData(2000, ExportScript.Tools.RoundFreqeuncy((UHF_RADIO:get_frequency()/1000000))) -- ExportScript.Tools.RoundFreqeuncy(frequency (MHz|KHz), format ("7.3"), PrefixZeros (false), LeastValue (0.025))
|
|
]]
|
|
|
|
-- Cockpit Light
|
|
ExportScript.Tools.IkarusCockpitLights(mainPanelDevice, {280, 281, 491, 492, 894, 895, 914})
|
|
-- Lh RedLights Brightness Rst gr.1, Lh RedLights Brightness Rst gr.2, Rh RedLights Brightness Rst gr.1, Rh RedLights Brightness Rst gr.2, Central RedLights Brightness Rst gr.1, Central RedLights Brightness Rst gr.2, 5.5V Lights Brightness Rheostat
|
|
|
|
-- deactivated WPADI right warning Flag
|
|
ExportScript.Tools.SendData(2020, 0)
|
|
|
|
-- UV-26
|
|
local lUV26 = ExportScript.Tools.getListIndicatorValue(4)
|
|
|
|
if lUV26 ~= nil and lUV26.txt_digits ~= nil then
|
|
ExportScript.Tools.SendData(2006, string.format("%s", lUV26.txt_digits))
|
|
else
|
|
ExportScript.Tools.SendData(2006, " ")
|
|
end
|
|
|
|
--[[
|
|
-- AGB_3K_LEFT
|
|
local lAGB_3K_LEFT = GetDevice(6)
|
|
ExportScript.Tools.WriteToLog('lAGB_3K_LEFT:get_sideslip '..ExportScript.Tools.dump(lAGB_3K_LEFT:get_sideslip()))
|
|
ExportScript.Tools.WriteToLog('lAGB_3K_LEFT:get_bank '..ExportScript.Tools.dump(lAGB_3K_LEFT:get_bank()))
|
|
ExportScript.Tools.WriteToLog('lAGB_3K_LEFT:get_pitch '..ExportScript.Tools.dump(lAGB_3K_LEFT:get_pitch()))
|
|
|
|
-- AGB_3K_RIGHT
|
|
local lAGB_3K_RIGHT = GetDevice(7)
|
|
ExportScript.Tools.WriteToLog('lAGB_3K_RIGHT:get_sideslip '..ExportScript.Tools.dump(lAGB_3K_RIGHT:get_sideslip()))
|
|
ExportScript.Tools.WriteToLog('lAGB_3K_RIGHT:get_bank '..ExportScript.Tools.dump(lAGB_3K_RIGHT:get_bank()))
|
|
ExportScript.Tools.WriteToLog('lAGB_3K_RIGHT:get_pitch '..ExportScript.Tools.dump(lAGB_3K_RIGHT:get_pitch()))
|
|
|
|
-- DISS_15
|
|
local lDISS_15 = GetDevice(15)
|
|
ExportScript.Tools.WriteToLog('lDISS_15:get_w_vector '..ExportScript.Tools.dump(lDISS_15:get_w_vector()))
|
|
ExportScript.Tools.WriteToLog('lDISS_15:get_drift_angle '..ExportScript.Tools.dump(lDISS_15:get_drift_angle()))
|
|
|
|
-- RADAR_ALTIMETER
|
|
local lRADAR_ALTIMETER = GetDevice(18)
|
|
ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_altitude '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_altitude()))
|
|
ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_dangerous_height_flag '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_dangerous_height_flag()))
|
|
ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_distance_limit '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_distance_limit()))
|
|
ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_dangerous_height '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_dangerous_height()))
|
|
ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_warning_flag '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_warning_flag()))
|
|
ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_mode '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_mode()))
|
|
ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_aperture_size '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_aperture_size()))
|
|
ExportScript.Tools.WriteToLog('lRADAR_ALTIMETER:get_needle_value '..ExportScript.Tools.dump(lRADAR_ALTIMETER:get_needle_value()))
|
|
|
|
-- MISC_SYSTEMS_INTERFACE
|
|
local lMISC_SYSTEMS_INTERFACE = GetDevice(20)
|
|
ExportScript.Tools.WriteToLog('lMISC_SYSTEMS_INTERFACE:get_rotor_blades_pitch '..ExportScript.Tools.dump(lMISC_SYSTEMS_INTERFACE:get_rotor_blades_pitch()))
|
|
ExportScript.Tools.WriteToLog('lMISC_SYSTEMS_INTERFACE:get_main_rotor_rpm '..ExportScript.Tools.dump(lMISC_SYSTEMS_INTERFACE:get_main_rotor_rpm()))
|
|
|
|
-- SPU_7 (Intercom)
|
|
local lSPU_7 = GetDevice(36)
|
|
ExportScript.Tools.WriteToLog('lSPU_7:is_communicator_available '..ExportScript.Tools.dump(lSPU_7:is_communicator_available()))
|
|
ExportScript.Tools.WriteToLog('lSPU_7:get_noise_level '..ExportScript.Tools.dump(lSPU_7:get_noise_level()))
|
|
ExportScript.Tools.WriteToLog('lSPU_7:get_signal_level '..ExportScript.Tools.dump(lSPU_7:get_signal_level()))
|
|
--ExportScript.Tools.WriteToLog('lSPU_7:set_communicator '..ExportScript.Tools.dump(lSPU_7:set_communicator())) -- test parameters
|
|
--ExportScript.Tools.WriteToLog('lSPU_7:set_voip_mode '..ExportScript.Tools.dump(lSPU_7:set_voip_mode())) -- test parameters
|
|
|
|
-- JADRO_1A
|
|
local lJADRO_1A = GetDevice(37)
|
|
ExportScript.Tools.WriteToLog('lJADRO_1A:is_on '..ExportScript.Tools.dump(lJADRO_1A:is_on()))
|
|
ExportScript.Tools.WriteToLog('lJADRO_1A:get_frequency '..ExportScript.Tools.dump(lJADRO_1A:get_frequency()))
|
|
--ExportScript.Tools.WriteToLog('lJADRO_1A:set_frequency '..ExportScript.Tools.dump(lJADRO_1A:set_frequency())) -- test parameters
|
|
--ExportScript.Tools.WriteToLog('lJADRO_1A:set_modulation '..ExportScript.Tools.dump(lJADRO_1A:set_modulation())) -- test parameters
|
|
--ExportScript.Tools.WriteToLog('lJADRO_1A:set_channel '..ExportScript.Tools.dump(lJADRO_1A:set_channel())) -- test parameters
|
|
|
|
-- R_863
|
|
local lR_863 = GetDevice(38)
|
|
ExportScript.Tools.WriteToLog('lR_863:is_on '..ExportScript.Tools.dump(lR_863:is_on()))
|
|
ExportScript.Tools.WriteToLog('lR_863:get_frequency '..ExportScript.Tools.dump(lR_863:get_frequency()))
|
|
--ExportScript.Tools.WriteToLog('lR_863:set_frequency '..ExportScript.Tools.dump(lR_863:set_frequency())) -- test parameters
|
|
--ExportScript.Tools.WriteToLog('lR_863:set_modulation '..ExportScript.Tools.dump(lR_863:set_modulation())) -- test parameters
|
|
--ExportScript.Tools.WriteToLog('lR_863:set_channel '..ExportScript.Tools.dump(lR_863:set_channel())) -- test parameters
|
|
|
|
-- R_828
|
|
local lR_828 = GetDevice(39)
|
|
ExportScript.Tools.WriteToLog('lR_828:is_on '..ExportScript.Tools.dump(lR_828:is_on()))
|
|
ExportScript.Tools.WriteToLog('lR_828:get_frequency '..ExportScript.Tools.dump(lR_828:get_frequency()))
|
|
--ExportScript.Tools.WriteToLog('lR_828:set_frequency '..ExportScript.Tools.dump(lR_828:set_frequency())) -- test parameters
|
|
--ExportScript.Tools.WriteToLog('lR_828:set_modulation '..ExportScript.Tools.dump(lR_828:set_modulation())) -- test parameters
|
|
--ExportScript.Tools.WriteToLog('lR_828:set_channel '..ExportScript.Tools.dump(lR_828:set_channel())) -- test parameters
|
|
]]
|
|
end
|
|
|
|
function ExportScript.ProcessDACConfigLowImportance(mainPanelDevice)
|
|
--[[
|
|
export in low tick interval to DAC
|
|
Example from A-10C
|
|
Get Radio Frequencies
|
|
get data from device
|
|
local UHF_RADIO = GetDevice(54)
|
|
ExportScript.Tools.SendDataDAC("ExportID", "Format")
|
|
ExportScript.Tools.SendDataDAC("ExportID", "Format", HardwareConfigID)
|
|
ExportScript.Tools.SendDataDAC("2000", string.format("%7.3f", UHF_RADIO:get_frequency()/1000000))
|
|
ExportScript.Tools.SendDataDAC("2000", ExportScript.Tools.RoundFreqeuncy((UHF_RADIO:get_frequency()/1000000))) -- ExportScript.Tools.RoundFreqeuncy(frequency (MHz|KHz), format ("7.3"), PrefixZeros (false), LeastValue (0.025))
|
|
]]
|
|
|
|
-- Radio comunication
|
|
-- JADRO 1A
|
|
local lJADRO_1A = GetDevice(37)
|
|
if lJADRO_1A:is_on() then
|
|
--ExportScript.Tools.SendDataDAC("2000", string.format("%7.4f", lJADRO_1A:get_frequency()/1000000))
|
|
ExportScript.Tools.SendDataDAC("2000", ExportScript.Tools.RoundFreqeuncy(lJADRO_1A:get_frequency()/1000000, "7.4"))
|
|
else
|
|
ExportScript.Tools.SendDataDAC("2000", "-")
|
|
end
|
|
|
|
-- R_863 (center)
|
|
local lR_863_c = GetDevice(38)
|
|
--ExportScript.Tools.SendDataDAC("2001", string.format("%7.3f", lR_863_c:get_frequency()/1000000))
|
|
ExportScript.Tools.SendDataDAC("2001", ExportScript.Tools.RoundFreqeuncy(lR_863_c:get_frequency()/1000000))
|
|
|
|
-- R_863 (left) Channel
|
|
local lR_863_l = {[0.0]="1",[0.05]="2",[0.10]="3",[0.15]="4",[0.20]="5",[0.25]="6",[0.30]="7",[0.35]="8",[0.40]="9",[0.45]="10",[0.50]="11",[0.55]="12",[0.60]="13",[0.65]="14",[0.70]="15",[0.75]="16",[0.80]="17",[0.85]="18",[0.90]="19",[0.95]="20"}
|
|
ExportScript.Tools.SendDataDAC("2002", lR_863_l[ExportScript.Tools.round(mainPanelDevice:get_argument_value(370), 2)])
|
|
|
|
-- R_863 (left) Frequency
|
|
-- is the same frequency as R_863 (center), but not the frequency from R_863 (left)
|
|
local lR_863_F = GetDevice(38)
|
|
--ExportScript.Tools.SendDataDAC("2003", string.format("%7.3f", lR_863_F:get_frequency()/1000000))
|
|
ExportScript.Tools.SendDataDAC("2003", ExportScript.Tools.RoundFreqeuncy(lR_863_F:get_frequency()/1000000))
|
|
|
|
-- R_828 Channel
|
|
local lR_828 = {[0.0]="1",[0.101]="2",[0.199]="3",[0.302]="4",[0.400]="5",[0.502]="6",[0.601]="7",[0.697]="8",[0.801]="9",[0.898]="10"}
|
|
ExportScript.Tools.SendDataDAC("2004", lR_828[ExportScript.Tools.round(mainPanelDevice:get_argument_value(736), 3)])
|
|
|
|
-- R_828 Frequency
|
|
local lR_828_F = GetDevice(39)
|
|
if lR_828_F:is_on() then
|
|
--ExportScript.Tools.SendDataDAC("2005", string.format("%7.3f", lR_828_F:get_frequency()/1000000))
|
|
ExportScript.Tools.SendDataDAC("2005", ExportScript.Tools.RoundFreqeuncy(lR_828_F:get_frequency()/1000000))
|
|
else
|
|
ExportScript.Tools.SendDataDAC("2005", "-")
|
|
end
|
|
|
|
-- UV-26
|
|
local lUV26 = ExportScript.Tools.getListIndicatorValue(4)
|
|
|
|
if lUV26 ~= nil and lUV26.txt_digits ~= nil then
|
|
ExportScript.Tools.SendDataDAC("2006", string.format("%s", lUV26.txt_digits))
|
|
else
|
|
ExportScript.Tools.SendDataDAC("2006", "-")
|
|
end
|
|
|
|
-- generic Radio display and frequency rotarys
|
|
-------------------------------------------------
|
|
-- genericRadioConf
|
|
ExportScript.genericRadioConf = {}
|
|
ExportScript.genericRadioConf['maxRadios'] = 3 -- numbers of aviables/supported radios
|
|
ExportScript.genericRadioConf[1] = {} -- first radio
|
|
ExportScript.genericRadioConf[1]['Name'] = "R-863 VHF/UHF" -- name of radio
|
|
ExportScript.genericRadioConf[1]['DeviceID'] = 38 -- DeviceID for GetDevice from device.lua
|
|
ExportScript.genericRadioConf[1]['setFrequency'] = true -- change frequency active
|
|
ExportScript.genericRadioConf[1]['FrequencyMultiplicator'] = 1000000 -- Multiplicator from Hz to MHz
|
|
ExportScript.genericRadioConf[1]['FrequencyFormat'] = "%7.3f" -- frequency view format LUA style
|
|
ExportScript.genericRadioConf[1]['FrequencyStep'] = 25 -- minimal step for frequency change
|
|
ExportScript.genericRadioConf[1]['minFrequency'] = 100.000 -- lowest frequency
|
|
ExportScript.genericRadioConf[1]['maxFrequency'] = 399.975 -- highest frequency
|
|
ExportScript.genericRadioConf[1]['Power'] = {} -- power button active
|
|
ExportScript.genericRadioConf[1]['Power']['ButtonID'] = 3068 -- power button id from cklickable.lua
|
|
ExportScript.genericRadioConf[1]['Power']['ValueOn'] = 1.0 -- power on value from cklickable.lua
|
|
ExportScript.genericRadioConf[1]['Power']['ValueOff'] = -1.0 -- power off value from cklickable.lua
|
|
ExportScript.genericRadioConf[1]['Volume'] = {} -- volume knob active
|
|
ExportScript.genericRadioConf[1]['Volume']['ButtonID'] = 3005 -- volume button id from cklickable.lua
|
|
-- ExportScript.genericRadioConf[1]['Preset'] = {} -- preset knob active
|
|
-- ExportScript.genericRadioConf[1]['Preset']['ArgumentID'] = 161 -- ManualPreset argument id from cklickable.lua
|
|
-- ExportScript.genericRadioConf[1]['Preset']['ButtonID'] = 3001 -- preset button id from cklickable.lua
|
|
-- Preset based on switchlogic on clickabledata.lua
|
|
-- ExportScript.genericRadioConf[1]['Preset']['List'] = {[0.0]="01",[0.05]="02",[0.10]="03",[0.15]="04",[0.20]="05",[0.25]="06",[0.30]="07",[0.35]="08",[0.40]="09",[0.45]="10",[0.50]="11",[0.55]="12",[0.60]="13",[0.65]="14",[0.70]="15",[0.75]="16",[0.80]="17",[0.85]="18",[0.90]="19",[0.95]="20",[1.00]="01"}
|
|
-- ExportScript.genericRadioConf[1]['Preset']['Step'] = 0.05 -- minimal step for preset change
|
|
ExportScript.genericRadioConf[1]['Squelch'] = {} -- squelch switch active
|
|
ExportScript.genericRadioConf[1]['Squelch']['ArgumentID'] = 155 -- ManualPreset argument id from cklickable.lua
|
|
ExportScript.genericRadioConf[1]['Squelch']['ButtonID'] = 3004 -- squelch button id from cklickable.lua
|
|
ExportScript.genericRadioConf[1]['Squelch']['ValueOn'] = 1.0 -- squelch on value from cklickable.lua
|
|
ExportScript.genericRadioConf[1]['Squelch']['ValueOff'] = 0.0 -- squelch off value from cklickable.lua
|
|
-- ExportScript.genericRadioConf[1]['Load'] = {} -- load button preset
|
|
-- ExportScript.genericRadioConf[1]['Load']['ButtonID'] = 3015 -- load button id from cklickable.lua
|
|
-- ManualPreset is AM FM modus switch Manual=AM, Preset=FM
|
|
-- ExportScript.genericRadioConf[1]['ManualPreset'] = {} -- switch manual or preset active
|
|
-- ExportScript.genericRadioConf[1]['ManualPreset']['ArgumentID'] = 369 -- ManualPreset argument id from cklickable.lua
|
|
-- ExportScript.genericRadioConf[1]['ManualPreset']['ButtonID'] = 3001 -- ManualPreset button id from cklickable.lua
|
|
-- ExportScript.genericRadioConf[1]['ManualPreset']['ValueManual'] = 0.0-- ManualPreset Manual value from cklickable.lua
|
|
-- ExportScript.genericRadioConf[1]['ManualPreset']['ValuePreset'] = 0.1-- ManualPreset Preset value from cklickable.lua
|
|
|
|
ExportScript.genericRadioConf[2] = {} -- secound radio
|
|
ExportScript.genericRadioConf[2]['Name'] = "YaDRO-1A HF" -- name of radio
|
|
ExportScript.genericRadioConf[2]['DeviceID'] = 37 -- DeviceID for GetDevice from device.lua
|
|
ExportScript.genericRadioConf[2]['setFrequency'] = true -- change frequency active
|
|
ExportScript.genericRadioConf[2]['FrequencyMultiplicator'] = 1000000 -- Multiplicator from Hz to MHz
|
|
ExportScript.genericRadioConf[2]['FrequencyFormat'] = "%7.4f" -- frequency view format LUA style
|
|
ExportScript.genericRadioConf[2]['FrequencyStep'] = 1 -- minimal step for frequency change
|
|
ExportScript.genericRadioConf[2]['minFrequency'] = 2.000 -- lowest frequency
|
|
ExportScript.genericRadioConf[2]['maxFrequency'] = 17.999 -- highest frequency
|
|
ExportScript.genericRadioConf[2]['Power'] = {} -- power button active
|
|
ExportScript.genericRadioConf[2]['Power']['ButtonID'] = 3013 -- power button id from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['Power']['ValueOn'] = 0.1 -- power on value from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['Power']['ValueOff'] = 0.0 -- power off value from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['Volume'] = {} -- volume knob active
|
|
ExportScript.genericRadioConf[2]['Volume']['ButtonID'] = 3007 -- volume button id from cklickable.lua
|
|
-- ExportScript.genericRadioConf[2]['Preset'] = {} -- preset knob active
|
|
-- ExportScript.genericRadioConf[2]['Preset']['ArgumentID'] = 137 -- ManualPreset argument id from cklickable.lua
|
|
-- ExportScript.genericRadioConf[2]['Preset']['ButtonID'] = 3001 -- preset button id from cklickable.lua
|
|
-- Preset based on switchlogic on clickabledata.lua
|
|
-- ExportScript.genericRadioConf[2]['Preset']['List'] = {[0.0]="01",[0.01]="02",[0.02]="03",[0.03]="04",[0.04]="05",[0.05]="06",[0.06]="07",[0.07]="08",[0.08]="09",[0.09]="10",[0.10]="11",[0.11]="12",[0.12]="13",[0.13]="14",[0.14]="15",[0.15]="16",[0.16]="17",[0.17]="18",[0.18]="19",[0.19]="20",[0.20]="01"}
|
|
-- ExportScript.genericRadioConf[2]['Preset']['Step'] = 0.01 -- minimal step for preset change
|
|
ExportScript.genericRadioConf[2]['Squelch'] = {} -- squelch switch active
|
|
ExportScript.genericRadioConf[2]['Squelch']['ArgumentID'] = 743 -- ManualPreset argument id from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['Squelch']['ButtonID'] = 3008 -- squelch button id from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['Squelch']['ValueOn'] = 0.7 -- squelch on value from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['Squelch']['ValueOff'] = 0.0 -- squelch off value from cklickable.lua
|
|
-- Load is autotune lamp on Mi-8
|
|
ExportScript.genericRadioConf[2]['Load'] = {} -- load button preset
|
|
ExportScript.genericRadioConf[2]['Load']['ButtonID'] = nil -- load button id from cklickable.lua, Load button deactiviert
|
|
ExportScript.genericRadioConf[2]['Load']['ArgumentID'] = 849 -- load argument id for autotune lamp on Mi-8
|
|
-- ManualPreset button change between SSB (Single SideBand) and AM, Manual=SSB, AM=Preset
|
|
ExportScript.genericRadioConf[2]['ManualPreset'] = {} -- switch manual or preset active
|
|
ExportScript.genericRadioConf[2]['ManualPreset']['ArgumentID'] = 744 -- ManualPreset argument id from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['ManualPreset']['ButtonID'] = 3001 -- ManualPreset button id from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['ManualPreset']['ValueManual'] = 0.5-- ManualPreset Manual value from cklickable.lua
|
|
ExportScript.genericRadioConf[2]['ManualPreset']['ValuePreset'] = 1.0-- ManualPreset Preset value from cklickable.lua
|
|
|
|
ExportScript.genericRadioConf[3] = {} -- secound radio
|
|
ExportScript.genericRadioConf[3]['Name'] = " R-828 LVHF FM" -- name of radio
|
|
ExportScript.genericRadioConf[3]['DeviceID'] = 39 -- DeviceID for GetDevice from device.lua
|
|
ExportScript.genericRadioConf[3]['setFrequency'] = false -- change frequency active
|
|
ExportScript.genericRadioConf[3]['FrequencyMultiplicator'] = 1000000 -- Multiplicator from Hz to MHz
|
|
ExportScript.genericRadioConf[3]['FrequencyFormat'] = "%7.3f" -- frequency view format LUA style
|
|
ExportScript.genericRadioConf[3]['FrequencyStep'] = 25 -- minimal step for frequency change
|
|
ExportScript.genericRadioConf[3]['minFrequency'] = 20.000 -- lowest frequency
|
|
ExportScript.genericRadioConf[3]['maxFrequency'] = 59.975 -- highest frequency
|
|
ExportScript.genericRadioConf[3]['Power'] = {} -- power button active
|
|
ExportScript.genericRadioConf[3]['Power']['ButtonID'] = 3005 -- power button id from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Power']['ValueOn'] = 1.0 -- power on value from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Power']['ValueOff'] = 0.0 -- power off value from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Volume'] = {} -- volume knob active
|
|
ExportScript.genericRadioConf[3]['Volume']['ButtonID'] = 3002 -- volume button id from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Preset'] = {} -- preset knob active
|
|
ExportScript.genericRadioConf[3]['Preset']['ArgumentID'] = 735 -- ManualPreset argument id from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Preset']['ButtonID'] = 3001 -- preset button id from cklickable.lua
|
|
-- ExportScript.genericRadioConf[3]['Preset']['ButtonID2'] = 3002 -- preset button id from cklickable.lua
|
|
-- Preset based on switchlogic on clickabledata.lua
|
|
ExportScript.genericRadioConf[3]['Preset']['List'] = {[0.0]="1",[0.1]="2",[0.2]="3",[0.3]="4",[0.4]="5",[0.5]="6",[0.6]="7",[0.7]="8",[0.8]="9",[0.9]="10"}
|
|
ExportScript.genericRadioConf[3]['Preset']['Step'] = 0.1 -- minimal step for preset change
|
|
-- ExportScript.genericRadioConf[3]['Preset']['Step2'] = -0.1 -- minimal step for preset change
|
|
ExportScript.genericRadioConf[3]['Squelch'] = {} -- squelch switch active
|
|
ExportScript.genericRadioConf[3]['Squelch']['ArgumentID'] = 739 -- ManualPreset argument id from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Squelch']['ButtonID'] = 3004 -- squelch button id from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Squelch']['ValueOn'] = 0.0 -- squelch on value from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Squelch']['ValueOff'] = -1.0 -- squelch off value from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Load'] = {} -- load button preset
|
|
ExportScript.genericRadioConf[3]['Load']['ButtonID'] = 3003 -- load button id from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['Load']['ArgumentID'] = 740 -- load argument id for autotune lamp on Mi-8
|
|
-- ManualPreset change betwen VOICE and HOMING Mode, Manual=Voice, Preset=Homing
|
|
ExportScript.genericRadioConf[3]['ManualPreset'] = {} -- switch manual or preset active
|
|
ExportScript.genericRadioConf[3]['ManualPreset']['ArgumentID'] = 757 -- ManualPreset argument id from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['ManualPreset']['ButtonID'] = 3006 -- ManualPreset button id from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['ManualPreset']['ValueManual'] = 1.0-- ManualPreset Manual value from cklickable.lua
|
|
ExportScript.genericRadioConf[3]['ManualPreset']['ValuePreset'] = 0.0-- ManualPreset Preset value from cklickable.lua
|
|
|
|
ExportScript.genericRadio(nil, nil)
|
|
|
|
--============================================================================================
|
|
--[[
|
|
ExportScript.Tools.WriteToLog('list_cockpit_params(): '..ExportScript.Tools.dump(list_cockpit_params()))
|
|
ExportScript.Tools.WriteToLog('CMSP: '..ExportScript.Tools.dump(list_indication(7)))
|
|
|
|
-- list_indication get tehe value of cockpit displays
|
|
local ltmp1 = 0
|
|
for ltmp2 = 0, 20, 1 do
|
|
ltmp1 = list_indication(ltmp2)
|
|
ExportScript.Tools.WriteToLog(ltmp2..': '..ExportScript.Tools.dump(ltmp1))
|
|
end
|
|
]]
|
|
--[[
|
|
-- getmetatable get function name from devices
|
|
local ltmp1 = 0
|
|
for ltmp2 = 1, 70, 1 do
|
|
ltmp1 = GetDevice(ltmp2)
|
|
ExportScript.Tools.WriteToLog(ltmp2..': '..ExportScript.Tools.dump(ltmp1))
|
|
ExportScript.Tools.WriteToLog(ltmp2..' (metatable): '..ExportScript.Tools.dump(getmetatable(ltmp1)))
|
|
end
|
|
]]
|
|
end
|