Demonstration Mission: AID-019 - AI_A2A - Engage Range Test
+Demonstration Mission: AID-019 - AI_A2A - Engage Range Test
In this example an Engage Radius is set to various values.
@@ -1970,7 +1970,7 @@ when you don't want to let the AI_A2A_DISPATCHER react immediately when a certaiUse the method AI_A2A_DISPATCHER.SetGciRadius() to set a specific controlled ground intercept radius. The Ground Controlled Intercept radius is defined for ALL squadrons which are operational.
-Demonstration Mission: AID-013 - AI_A2A - Intercept Test
+Demonstration Mission: AID-013 - AI_A2A - Intercept Test
In these examples, the Gci Radius is set to various values:
@@ -2004,7 +2004,7 @@ If a hot war is chosen then no borders actually need to be defi it makes it easier sometimes for the mission maker to envisage where the red and blue territories roughly are. In a hot war the borders are effectively defined by the ground based radar coverage of a coalition. -Demonstration Mission: AID-009 - AI_A2A - Border Test
+Demonstration Mission: AID-009 - AI_A2A - Border Test
In this example a border is set for the CCCP A2A dispatcher:
diff --git a/Documentation/AI.AI_A2G_Dispatcher.html b/Documentation/AI.AI_A2G_Dispatcher.html index 7ea00863a..7cc7dd13e 100644 --- a/Documentation/AI.AI_A2G_Dispatcher.html +++ b/Documentation/AI.AI_A2G_Dispatcher.html @@ -1634,7 +1634,7 @@The Defender Default Settings over all Squadrons.
- - - -The Defender Default Settings over all Squadrons.
- - - -The Defender Default Settings over all Squadrons.
- - - -The Defender Default Settings over all Squadrons.
- - - -AI_BALANCER:onenterDestroying(SetGroup, AIGroup, From, Event, To, ClientName)
AI_BALANCER:onenterDestroying
AI_BALANCER:onenterMonitoring
AI_BALANCER:onenterSpawning(SetGroup, ClientName, AIGroup, From, Event, To)
AI_BALANCER:onenterSpawning
AI_BALANCER:onenterDestroying
AI_BALANCER:onenterMonitoring
AI_BALANCER:onenterSpawning
Aircraft is on a pickup mission.
-Aircraft is on a pickup mission.
-Aircraft is on a pickup mission.
- @@ -6757,9 +6748,6 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau - -Aircraft is on a pickup mission.
- diff --git a/Documentation/AI.AI_Cargo_Dispatcher.html b/Documentation/AI.AI_Cargo_Dispatcher.html index 9d4987fac..9fb700d0c 100644 --- a/Documentation/AI.AI_Cargo_Dispatcher.html +++ b/Documentation/AI.AI_Cargo_Dispatcher.html @@ -1629,7 +1629,7 @@Test missions can be located on the main GITHUB site.
-FlightControl-Master/MOOSE_MISSIONS/AID - AI Dispatching/AID-CGO - AI Cargo Dispatching/
+FlightControl-Master/MOOSE_MISSIONS/AID - AI Dispatching/AID-CGO - AI Cargo Dispatching/
A home zone can be specified to where the Carriers will move when there isn't any cargo left for pickup. Use AI_CARGO_DISPATCHER.SetHomeZone() to specify the home zone.
-If no home zone is specified, the carriers will wait near the deploy zone for a new pickup command.
+If no home zone is specified, the carriers will wait near the deploy zone for a new pickup command.
@@ -2235,7 +2235,7 @@ Use AI_CARGO_DISPATCHER.SetHomeZon
List of AI_Cargo
List of AI_Cargo
@@ -5741,7 +5741,7 @@ AICargoDispatcherHelicopter:SetPickupSpeed( 200, 100 ) #table AI_CARGO_DISPATCHER.AI_Cargo - +List of AI_Cargo
@@ -7439,7 +7439,7 @@ AICargoDispatcherHelicopter:SetPickupSpeed( 200, 100 ) #table AI_CARGO_DISPATCHER.AI_Cargo - +List of AI_Cargo
diff --git a/Documentation/AI.AI_Cargo_Dispatcher_APC.html b/Documentation/AI.AI_Cargo_Dispatcher_APC.html index ab17bfdbc..b8c07b63d 100644 --- a/Documentation/AI.AI_Cargo_Dispatcher_APC.html +++ b/Documentation/AI.AI_Cargo_Dispatcher_APC.html @@ -1876,7 +1876,7 @@ Therefore, this class is considered to be deprecatedList of AI_Cargo
List of AI_Cargo
List of AI_Cargo
List of AI_Cargo
self.CargoObject:Destroy()
+ +Now we spawn the new group based on the template created.
+The AI is on by default when spawning a group.
+Don't repeat the group from Take-Off till Landing and back Take-Off by ReSpawning.
+ @@ -3694,6 +3706,20 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau + + + +The internal counter of the amount of spawning the has happened since SpawnStart.
+Overwrite unit names by default with group name.
+By default, no InitLimit
- - - - -When the first Spawn executes, all the Groups need to be made visible before start.
+Flag that indicates if all the Groups of the SpawnGroup need to be visible when Spawned.
The AI is on by default when spawning a group.
+The internal counter of the amount of spawning the has happened since SpawnStart.
+Overwrite unit names by default with group name.
+Flag that indicates if all the Groups of the SpawnGroup need to be visible when Spawned.
Function to get the HQ object for further use
+The #DETECTION_AREAS object for AWACS
- - - -The ME name of the HQ object
- - - -switch alarm state RED
-self.SAMCheckRanges = {}
- @@ -8652,28 +8619,6 @@ E.g. `mymantis:SetAdvancedMode(true, 90)`The #DETECTION_AREAS object for AWACS
- - - -The ME name of the HQ object
- - - -switch alarm state RED
-self.SAMCheckRanges = {}
- diff --git a/Documentation/Functional.RAT.html b/Documentation/Functional.RAT.html index 83e0dd0e1..deccb901f 100644 --- a/Documentation/Functional.RAT.html +++ b/Documentation/Functional.RAT.html @@ -3471,12 +3471,6 @@ manager:Stop(7200)Type of terminal to be used when spawning at an airbase.
-Type of terminal to be used when spawning at an airbase.
- - - -Type of terminal to be used when spawning at an airbase.
- - - -Create the CSV file.
+Create the CSV file.
+Radio queue of LSO.
-Radio queue of marshal.
-Radio queue of LSO.
- - - -Radio queue of marshal.
- - - -Radio queue of LSO.
- - - -Radio queue of marshal.
- - - -Decrease stack/flag. Human player needs to take care himself.
+ +Set section lead of player flight.
-Band modulation.
- - - -contain a table for each SAR with all units he has with the original names
- - - -contain a table for each SAR with all units he has with the original names
- - - -contain a table for each SAR with all units he has with the original names
- - - -holds #CTLD_ENGINEERING objects
+noob catch
+time to repairor build a unit/group
holds #CTLD_ENGINEERING objects
+noob catch
+time to repairor build a unit/group
holds #CTLD_ENGINEERING objects
+noob catch
+time to repairor build a unit/group
template for a group of 10 paratroopers
-template for a group of 10 paratroopers
-In order to use Google Cloud for TTS you need to use MSRS.SetProvider and MSRS.SetProviderOptionsGoogle functions:
+In order to use Google Cloud for TTS you need to use MSRS.SetProvider and MSRS.SetProviderOptionsGoogle functions:
msrs:SetProvider(MSRS.Provider.GOOGLE)
msrs:SetProviderOptionsGoogle(CredentialsFile, AccessKey)
@@ -1778,7 +1778,7 @@ Google's supported SSML reference: https://cloud.google.com/text-to-speech/docs/
Amazon Web Service [Only DCS-gRPC backend]
-In order to use Amazon Web Service (AWS) for TTS you need to use MSRS.SetProvider and MSRS.SetProviderOptionsAmazon functions:
+In order to use Amazon Web Service (AWS) for TTS you need to use MSRS.SetProvider and MSRS.SetProviderOptionsAmazon functions:
msrs:SetProvider(MSRS.Provider.AMAZON)
msrs:SetProviderOptionsAmazon(AccessKey, SecretKey, Region)
@@ -1790,7 +1790,7 @@ msrs:SetProviderOptionsAmazon(AccessKey, SecretKey, Region)
Microsoft Azure [Only DCS-gRPC backend]
-In order to use Microsoft Azure for TTS you need to use MSRS.SetProvider and MSRS.SetProviderOptionsAzure functions:
+In order to use Microsoft Azure for TTS you need to use MSRS.SetProvider and MSRS.SetProviderOptionsAzure functions:
msrs:SetProvider(MSRS.Provider.AZURE)
msrs:SetProviderOptionsAmazon(AccessKey, Region)
diff --git a/Documentation/Tasking.Task_A2A_Dispatcher.html b/Documentation/Tasking.Task_A2A_Dispatcher.html
index 34058e877..b0f6202ea 100644
--- a/Documentation/Tasking.Task_A2A_Dispatcher.html
+++ b/Documentation/Tasking.Task_A2A_Dispatcher.html
@@ -2939,7 +2939,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #boolean
+
TASK_A2A_DISPATCHER.FlashNewTask
@@ -3664,7 +3664,7 @@ If too large, any airborne cap may not be able to reach the detected target area
- #boolean
+
TASK_A2A_DISPATCHER.FlashNewTask
@@ -4840,7 +4840,7 @@ If too large, any airborne cap may not be able to reach the detected target area
- #boolean
+
TASK_A2A_DISPATCHER.FlashNewTask
@@ -6318,7 +6318,7 @@ If too large, any airborne cap may not be able to reach the detected target area
- #boolean
+
TASK_A2A_DISPATCHER.FlashNewTask
diff --git a/Documentation/Tasking.Task_A2G_Dispatcher.html b/Documentation/Tasking.Task_A2G_Dispatcher.html
index 81ab791f5..154b1f57f 100644
--- a/Documentation/Tasking.Task_A2G_Dispatcher.html
+++ b/Documentation/Tasking.Task_A2G_Dispatcher.html
@@ -3209,14 +3209,11 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #boolean
+
TASK_A2G_DISPATCHER.FlashNewTask
-
- set to false to suppress flash messages
-
@@ -3789,14 +3786,11 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #boolean
+
TASK_A2G_DISPATCHER.FlashNewTask
-
- set to false to suppress flash messages
-
@@ -4979,14 +4973,11 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #boolean
+
TASK_A2G_DISPATCHER.FlashNewTask
-
- set to false to suppress flash messages
-
@@ -6471,14 +6462,11 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #boolean
+
TASK_A2G_DISPATCHER.FlashNewTask
-
- set to false to suppress flash messages
-
diff --git a/Documentation/Tasking.Task_CARGO.html b/Documentation/Tasking.Task_CARGO.html
index a9d8a4ebe..cece80bc5 100644
--- a/Documentation/Tasking.Task_CARGO.html
+++ b/Documentation/Tasking.Task_CARGO.html
@@ -3235,6 +3235,17 @@ based on the tasking capabilities defined in
+
+
+
+
+
+
+FSM_PROCESS.DeployZone
+
+
+
@@ -3267,7 +3278,7 @@ based on the tasking capabilities defined in
- #number
+
TASK_CARGO.CargoLimit
@@ -4689,7 +4700,7 @@ based on the tasking capabilities defined in
- #number
+
TASK_CARGO.CargoLimit
@@ -9221,7 +9232,7 @@ If the Unit is part of the Task, true is returned.
- #number
+
TASK_CARGO.CargoLimit
diff --git a/Documentation/Tasking.Task_Cargo_Dispatcher.html b/Documentation/Tasking.Task_Cargo_Dispatcher.html
index 28895847a..bb921fa68 100644
--- a/Documentation/Tasking.Task_Cargo_Dispatcher.html
+++ b/Documentation/Tasking.Task_Cargo_Dispatcher.html
@@ -3216,7 +3216,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
- #table
+
TASK_CARGO_DISPATCHER.DefaultDeployZones
@@ -4322,7 +4322,7 @@ This method can only be used once!
- #table
+
TASK_CARGO_DISPATCHER.DefaultDeployZones
@@ -5180,7 +5180,7 @@ This method can only be used once!
- #table
+
TASK_CARGO_DISPATCHER.DefaultDeployZones
@@ -6669,7 +6669,7 @@ This method can only be used once!
- #table
+
TASK_CARGO_DISPATCHER.DefaultDeployZones
diff --git a/Documentation/Wrapper.Client.html b/Documentation/Wrapper.Client.html
index abd4546a9..2dbeeb7a5 100644
--- a/Documentation/Wrapper.Client.html
+++ b/Documentation/Wrapper.Client.html
@@ -6353,7 +6353,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
-The pattern to look for. Refer to LUA patterns for regular expressions in LUA.
+The pattern to look for. Refer to LUA patterns for regular expressions in LUA.
@@ -6409,7 +6409,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
-The pattern to look for. Refer to LUA patterns for regular expressions in LUA.
+The pattern to look for. Refer to LUA patterns for regular expressions in LUA.
diff --git a/Documentation/Wrapper.Group.html b/Documentation/Wrapper.Group.html
index 376e8d294..3ace3f017 100644
--- a/Documentation/Wrapper.Group.html
+++ b/Documentation/Wrapper.Group.html
@@ -5718,7 +5718,7 @@ Ship:Destroy( false ) -- Don't generate an event upon destruction.
-The pattern to look for. Refer to LUA patterns for regular expressions in LUA.
+The pattern to look for. Refer to LUA patterns for regular expressions in LUA.
@@ -5774,7 +5774,7 @@ Ship:Destroy( false ) -- Don't generate an event upon destruction.
-The pattern to look for. Refer to LUA patterns for regular expressions in LUA.
+The pattern to look for. Refer to LUA patterns for regular expressions in LUA.
diff --git a/Documentation/Wrapper.Positionable.html b/Documentation/Wrapper.Positionable.html
index 961ff4fc4..6389f78cc 100644
--- a/Documentation/Wrapper.Positionable.html
+++ b/Documentation/Wrapper.Positionable.html
@@ -3732,6 +3732,17 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
+
+
+
+
+
+
+ Core.Spot#SPOT
+POSITIONABLE.Spot
+
+
+
@@ -7766,6 +7777,17 @@ Coordinates are dependent on the position of the maps origin.
+
+
+
+
+
+
+ Core.Spot#SPOT
+POSITIONABLE.Spot
+
+
+
@@ -8336,6 +8358,17 @@ If the Identifiable is alive, true is returned.
+
+
+
+
+
+
+ Core.Spot#SPOT
+POSITIONABLE.Spot
+
+
+
@@ -8523,6 +8556,17 @@ If the Identifiable is alive, true is returned.
+
+
+
+
+
+
+ Core.Spot#SPOT
+POSITIONABLE.Spot
+
+
+
diff --git a/Documentation/Wrapper.Unit.html b/Documentation/Wrapper.Unit.html
index a12d62632..8b514f712 100644
--- a/Documentation/Wrapper.Unit.html
+++ b/Documentation/Wrapper.Unit.html
@@ -4751,7 +4751,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
-The pattern to look for. Refer to LUA patterns for regular expressions in LUA.
+The pattern to look for. Refer to LUA patterns for regular expressions in LUA.
@@ -4807,7 +4807,7 @@ When Moose is loaded statically, (as one file), tracing is switched off by defau
-The pattern to look for. Refer to LUA patterns for regular expressions in LUA.
+The pattern to look for. Refer to LUA patterns for regular expressions in LUA.