The check for whether or not the escort is actually needed happens later, and thus the mission can still be scrubbed if it's too dangerous. However, missions should not be scrubbed when a particular escort type is unplannable, yet not needed. Only if the primary flight type is not plannable should the mission immediately be scrubbed
* Auto-ato AWACS & Tankers settings
Split off the **Automatic AWACS package planning** and **Automatic Theater tanker package planning** settings from **Automatic package planning behavior** so players can choose to have AWACS and theater tankers auto-planned, while managing everything else themselves.
* Drop logic to child-classes
* Enable AWACS auto-planning by default
* Switch order of preconditions
---------
Co-authored-by: Raffson <Raffson@users.noreply.github.com>
- Plan number of aircraft more accurately
- Fine-tuning ingress waypoint tasks
- Add lineup waypoint for STRIKE flights, 10NM in front of ingress on the same heading as the target
* Added a separate Doctrine page in settings with the following new options:
- Minimum number of aircraft for autoplanner to plan OCA packages against
- Airbase threat range (nmi)
- TARCAP threat buffer distance (nmi)
- AEW&C threat buffer distance (nmi)
- Theater tanker threat buffer distance (nmi)
Implemented handling for the OPFOR autoplanner aggressiveness in objectivefinder.py vulnerable_control_points().
* * Added three new options in Settings:
- Autoplanner plans refueling flights for Strike packages
- Autoplanner plans refueling flights for OCA packages
- Autoplanner plans refueling flights for DEAD packages
Fixed a bug in faction.py where F-16Ds were not correctly removed from the faction when the F-16I/F-16D mod was not selected.
* Renamed Maximum frontline length -> Maximum frontline width.
* Roadbase and ground spawn support
Implemented support for roadbases and ground spawn slots at airfields and FOBs. The ground spawn slots can be inserted in campaigns by placing either an A-10A or an AJS37 at a runway or ramp. This will cause an invisible FARP, an ammo dump and a fuel dump to be placed (behind the slot in case of A-10A, to the side in case of AJS37) in the generated campaigns. The ground spawn slot can be used by human controlled aircraft in generated missions. Also allowed the use of the four-slot FARP and the single helipad in campaigns, in addition to the invisible FARP. The first waypoint of the placed aircraft will be the center of a Remove Statics trigger zone (which might or might not work in multiplayer due to a DCS limitation).
Also implemented three new options in settings:
- AI fixed-wing aircraft can use roadbases / bases with only ground spawns
- This setting will allow the AI to use the roadbases for flights and transfers. AI flights will air-start from these bases, since the AI in DCS is not currently able to take off from ground spawns.
- Spawn trucks at ground spawns in airbases instead of FARP statics
- Spawn trucks at ground spawns in roadbases instead of FARP statics
- These settings will replace the FARP statics with refueler and ammo trucks at roadbases. Enabling them might have a negative performance impact.
* Modified calculate_parking_slots() so it now takes into account also helicopter slots on FARPs and also ground start slots (but only if the aircraft is flyable or the "AI fixed-wing aircraft can use roadbases / bases with only ground spawns" option is enabled in settings).
* Improved the way parking slots are communicated on the basemenu window.
* Refactored helipad and ground spawn appends to static methods _add_helipad and _add_ground_spawn in mizcampaignloader.py
Added missing changelog entries.
Fixed tgogenerator.py imports.
Cleaned up ParkingType() construction.
* Added test_control_point_parking for testing that the correct number of parking slots are returned for control point in test_controlpoint.py
* Added test_parking_type_from_squadron to test the correct ParkingType object is returned for a squadron of Viggens in test_controlpoint.py
* Added test_parking_type_from_aircraft to test the correct ParkingType object is returned for Viggen aircraft type in test_controlpoint.py
---------
Co-authored-by: Raffson <Raffson@users.noreply.github.com>
We want other pieces of country information (in particular the short
names). This cleans up a lot of code anyway.
As an added bonus, this now catches squadrons that used invalid names
which would previously be passed through to pydcs and... then I don't
know what would happen.
Cleanup and reword refuel waypoints
- rename Stopover back to CargoStop
- precise some waypoint naming
Cleanup and refine airlift and airassault waypoints
- Drop Off and Pickup now correctly worded
- Helo waypoints now represent LandingZones for pickup and dropoff
Forbid planes from air assault.
Make air assault drop-off non-optional.
There is always a drop-off location for troops.
Add docs explaining what the assault area is.
Add error handling for cargo drop waypoints.
Document some airlift waypoint behavior.
Remove unnecessary refuel waypoint in airlifts.
Remove CTLD logic from Airlift flightplan for AI
Add Ingress Point to AirAssault FlightPlan
Add simulation halt at AirAssault ingress
Remove AirAssault completly from AutoPlanner
Remove unneeded LandRefuel from Airlift
Clarify cargo waypoints for AirLift and AirAssault
Squashing 8 commits by DanAlbert:
- Track theater in ControlPoint.
Simplifies finding the owning theater of a control point. Not used yet.
- Clean some cruft out of FlightPlanBuilder.
- Clean up silly some exception handling.
- Move FlightPlan instantiation into the builder.
I'm working on moving the builder to be owned by the Flight, which will simplify callers that need to create (or recreate) flight plans for a flight.
- Simplify IBuilder constructor.
We have access to the theater via the flight's departure airbase now.
- Move FlightPlan creation into Flight.
For now this is just a callsite cleanup. Later, this will make it easier
to separate unscheduled and scheduled flights into different classes without complicating the layout/scheduling.
- Remove superfluous constructors.
- Remove unused Package field.
- Add the new airassault mission type and special flightplans for it
- Add the mission type to airbase and FOB
- Add Layout for the UH-1H
- Add mission type to capable squadrons
- Allow the auto planner to task air assault missions when preconditions are met
- Improve Airlift mission type and improve the flightplan (Stopover and Helo landing)
- Allow Slingload and spawnable crates for airlift
- Rework airsupport to a general missiondata class
- Added Carrier Information to mission data
- Allow to define CTLD specific capabilities in the unit yaml
- Allow inflight preload and fixed wing support for air assault
- factor out own class for the iadsnetwork within the conflicttheater
- This class will handle all Skynet related things - no specific group_name handling necessary in future
- make iadsbuilding own TGO class because SAM & EWRs are Vehicle Groups. IADS Elements dont have any groups attached.
- added command center, connection node and power source as Ground objects which can be added by the campaign designer
- adjust lua generator to support new iads units
- parse the campaign yaml to get the iads network information
- use the range as fallback if no yaml information was found
- complete rewrite of the skynet lua script
- allow destruction of iads network to be persistent over all rounds
- modified the presetlocation handling: the wrapper PresetLocation for PointWithHeading now stores the original name from the campaign miz to have the ability to process campaign yaml configurations based on the ground unit
- Implementation of the UI representation for the IADS Network
- Give user the option to enable or disable advanced iads
- Extended the layout system: Implement Sub task handling to support PD
Split the oversized file into one per plan type. This also moves the
layout responsibility out of the oversized FlightPlanBuilder and into
each flight plan type file.
This is briefly moving us over to my fork of pydcs while we wait for
https://github.com/pydcs/dcs/pull/206 to be merged. The adaptation is
invasive enough that I don't want it lingering for long.
- completly refactored the way TGO handles groups and replaced the usage of the pydcs ground groups (vehicle, ship, static) with an own Group and Unit class.
- this allows us to only take care of dcs group generation during miz generation, where it should have always been.
- We can now have any type of unit (even statics) in the same logic ground group we handle in liberation. this is independent from the dcs group handling. the dcs group will only be genarted when takeoff is pressed.
- Refactored the unitmap and the scenery object handling to adopt to changes that now TGOs can hold all Units we want.
- Cleaned up many many many lines of uneeded hacks to build stuff around dcs groups.
- Removed IDs for TGOs as the names we generate are unique and for liberation to work we need no ids. Unique IDs for dcs will be generated for the units and groups only.
CAS would never be planned for turn 0 because there were no enemy ground
units, so a breakthrough attack was planned and CAS was considered
unnecessary. Fix that by rejecting all frontline stance tasks when there
are no *friendly* ground units to command.
Another issue is that CAS missions were being planned even when there
were no enemy front line forces. Skip planning in that case except on
turn 0 since we expect there to be enemy ground units on turn 1.
Fixes https://github.com/dcs-liberation/dcs_liberation/issues/1629
This also does improve the over-purchase problems, though I can't spot
the behavior change that's causing that. Presumably the old
implementation had a bug I can't spot and in rewriting it I solved the
problem...
Fixes https://github.com/dcs-liberation/dcs_liberation/issues/1582
This is needed fairly often, and we have a lot of Game being passed
around to ControlPoint methods specifically to support this. Just store
the owning Coalition directly in the ControlPoint to clean up. I haven't
cleaned up *every* API here, but did that aircraft allocations as an
example.
Since the theater commander runs once per campaign action, missions that
do not have aircraft available may be checked more than once a turn.
Without deduping requests this can lead to cases where the AI buys
dozens of tankers on turn 0.
Fixes https://github.com/dcs-liberation/dcs_liberation/issues/1470
