Fighter sweeps arrive at the target ahead of the rest of the package
(currently a fixed 5 minute lead) to clear out enemy fighters and then
RTB.
Fixes https://github.com/Khopa/dcs_liberation/issues/348
The increased precision that we had everywhere except the UI and the
interface with DCS was causing issues with ASAP creating barely
negative start times. The main cause of this was that we'd compute the
earliest possible TOT, it would result in, for example, 23:10.002.
When we then set the QTimeEdit for the TOT, we have to round because
it does not support (nor do we really want to display) sub-second
values, which then caused the previously 0 start time to be -0.002.
Instead, since the sub-second values aren't really interesting anyway,
we now just round TOTs up and start times down. This should prevent
negative start times from occurring (except when they've been manually
planned as such), and also prevents start times of 00:00:01.
Also rounds the package waypoint times to avoid the same issues, but
it's not really important which direction we round these.
Fixes https://github.com/Khopa/dcs_liberation/issues/295
Previously we were trying to make every potential flight plan look
just like a strike mission's flight plan. This led to a lot of special
case behavior in several places that was causing us to misplan TOTs.
I've reorganized this such that there's now an explicit `FlightPlan`
class, and any specialized behavior is handled by the subclasses.
I've also taken the opportunity to alter the behavior of CAS and
front-line CAP missions. These no longer involve the usual formation
waypoints. Instead the CAP will aim to be on station at the time that
the CAS mission reaches its ingress point, and leave at its egress
time. Both flights fly directly to the point with a start time
configured for a rendezvous.
It might be worth adding hold points back to every flight plan just to
ensure that non-formation flights don't end up with a very low speed
enroute to the target if they perform ground ops quicker than
expected.
We were only getting BARCAP results right in BARCAP packages. This
fixes calculations of TOTs and start times for BARCAPs in strike
packages.
The probably needs some refactoring. BARCAP is just the symptomatic
example at the moment, but the real problem is that different mission
profiles exist and we currently only handle one. Making profiles
explicit in mission planning will clean this up, will be needed for
other future mission types, and makes it easier for us to alter
behavior for waypoint and timing decisions based on the aircraft or
mission type.
Stop using "CAP". Use BARCAP or TARCAP instead.
TARCAP no longer allowed anywhere but front lines, since that's all we
have mission planning for right now. Later will add TARCAP and BARCAP
for all objective types with different timing profiles.
Part two of the fix for
https://github.com/Khopa/dcs_liberation/issues/210.
Reasonable ground speed depends a lot on altitude, so plumb that
information through to the speed estimator.
Also adds calculations for ground speed based on desired mach. I don't
know if DCS is using the same formulas, but we should at least be
pretty close.
We estimate the longest possible time from mission start to TOT for
all flights in a package and use that to set the TOT (plus any delay
used to stagger flights). This both cuts down on loiter time for
shorter flights and ensures that long flights will make it to the
target in time.
This is also used to compute the start time for the AI, so the
explicit delay option is no longer needed.
