- completly refactored the way TGO handles groups and replaced the usage of the pydcs ground groups (vehicle, ship, static) with an own Group and Unit class.
- this allows us to only take care of dcs group generation during miz generation, where it should have always been.
- We can now have any type of unit (even statics) in the same logic ground group we handle in liberation. this is independent from the dcs group handling. the dcs group will only be genarted when takeoff is pressed.
- Refactored the unitmap and the scenery object handling to adopt to changes that now TGOs can hold all Units we want.
- Cleaned up many many many lines of uneeded hacks to build stuff around dcs groups.
- Removed IDs for TGOs as the names we generate are unique and for liberation to work we need no ids. Unique IDs for dcs will be generated for the units and groups only.
* Initial refueling definitions.
* Adding refuel definitions.
* Initial functionality changes
* Regenerate package when adding refueling flight.
* Recursively change package waypoint.
* Fix mypy errors.
* Regenerate flight plans when tanker is added to package.
* Give tanker better starting position on package recovery.
* Add TOT calculation for refueling waypoint.
* Timing changes to Strike split point and Refueling start time.
* Add correct waypoint builder for refuel in tarcap and sweep. Remove restrict afterburner on refuel point.
* Always generate a refuel point for a package.
* Less arbitrary altitude in Refuel track start time calculation.
* Refueling waypoint no longer optional.
* Fix mypy gen error.
* Better discrimination of which tanker flight plan to make.
* Remove refuel tot calculations.
* Remove package regeneration on tanker flight addition.
This is the first step in a larger project to add play/pause buttons to
the Liberation UI so the mission can be generated at any point.
docs/design/turnless.md describes the plan.
This adds an option to fast forward the turn to first contact before
generating the mission. None of that is reflected in the UI (for now),
but the miz will be generated with many flights in the air.
For now "first contact" means as soon as any flight reaches its IP. I'll
follow up to add threat checking so that air-to-air combat also triggers
this, as will entering a SAM's threat zone.
This also includes an option to halt fast-forward whenever a player
flight reaches a certain mission-prep phase. This can be used to avoid
fast forwarding past the player's startup time, taxi time, or takeoff
time. By default this option is disabled so player aircraft may start in
the air (possibly even at their IP if they're the first mission to reach
IP).
Fuel states do not currently account for distance traveled during fast
forward. That will come later.
https://github.com/dcs-liberation/dcs_liberation/issues/1681
The landing waypoints need the airdrome_id field set to actually
associate with the airfield. Without this ferry flights will take off
and immediately land at their departure airfield.
This is as much as we can do until pydcs actually adds the py.typed
file. Once that's added there are a few ugly monkey patching corners
that will just need `# type: ignore` for now, but we can't pre-add those
since we have mypy warning us about superfluous ignore comments.
We were setting up all the correct *target* waypoints but the AI doesn't
use the target waypoints; they use the targets property of the ingress
waypoint. This meant that the flight plan looked correct in the UI and
was correct for players but the tasks were set up incorrectly for the AI
because building TGOs are aggravatingly multiple TGOs with the same name
in the implementation.
Mission targets now enumerate their own strike targets so that this
mistake is harder to make in the future.
This won't be perfect, the AI is still not able to parallelize tasks and
since buildings aren't groups they can only attack one structure at a
time, but they'll now at least switch to the next target after hitting
the first one.
As a bonus, stop bombing the dead buildings.
Fixes https://github.com/dcs-liberation/dcs_liberation/issues/235
Fixes https://github.com/dcs-liberation/dcs_liberation/issues/244
UI isn't finished. Bulk transfers where the player doesn't care what
aircraft get used work (though they're chosen with no thought at all),
but being able to plan your own airlift flight isn't here yet.
Cargo planes are not implemented yet.
No way to view the cargo of a flight (will come with the cargo flight
planning UI).
The airlift flight/package creation should probably be moved out of the
UI and into the game code.
AI doesn't use these yet.
https://github.com/Khopa/dcs_liberation/issues/825
The previous flight plan only makes sense if the convoy will make it a
significant distance from its starting point. At road speeds over the
typical mission duration this is not true, so we can actually plan this
as if it was a strike mission near the origin point and that's close
enough.
There's some cleanup work to do here that I've added todos for.
Fixes https://github.com/Khopa/dcs_liberation/issues/996
This currently is only supported for player flights. I have no idea how
to create an AI flight plan that won't just get them killed. AI-only BAI
missions against supply routes will warn the player on mission creation.
Still a work in progress (the missions don't actually perform their task, just orbit). Currently:
* AEW&C aircraft can be bought.
* AEW&C missions can be planned at any control point and at front lines.
* AEW&C will return after 4H or Bingo.
Started with TARCAP because they're simple, but will follow and extend
this to the other flight plans next.
This works by building navigation meshes (navmeshes) of the theater
based on the threat regions. A navmesh is created for each faction to
allow the unique pathing around each side's threats. Navmeshes are built
such that there are nav edges around threat zones to allow the planner
to pick waypoints that (slightly) route around threats before
approaching the target.
Using the navmesh, routes are found using A*. Performance appears
adequate, and could probably be improved with a cache if needed since
the small number of origin points means many flights will share portions
of their flight paths.
This adds a few visual debugging tools to the map. They're disabled by
default, but changing the local `debug` variable in `DisplayOptions` to
`True` will make them appear in the display options menu. These are:
* Display navmeshes (red and blue). Displaying either navmesh will draw
each navmesh polygon on the map view and highlight the mesh that
contains the cursor. Neighbors are indicated by a small yellow line
pointing from the center of the polygon's edge/vertext that is shared
with its neighbor toward the centroid of the zone.
* Shortest path from control point to mouse location. The first control
point for the selected faction is arbitrarily selected, and the
shortest path from that control point to the mouse cursor will be
drawn on the map.
* TARCAP plan near mouse location. A TARCAP will be planned from the
faction's first control point to the target nearest the mouse cursor.
https://github.com/Khopa/dcs_liberation/issues/292
Not converting all at once so I can prove the concept. After that we'll
want to cover all the cases where an int distance or speed is a part of
the save game (I've done one of them here with `Flight.alt`) so further
cleanups don't break save compat.
https://github.com/Khopa/dcs_liberation/issues/558
Breaks save compat because it adds new fields to `Flight` that have no
constant default. Removing all of our other save compat at the same
time.
Note that player flights with a divert point will have a nav point for
their actual landing point. This is because we place the divert point
last, and DCS won't let us have a land point anywhere but the final
waypoint. It would allow a LandingReFuAr point, but they're only
generated for player flights anyway so it doesn't really matter.
Fixes https://github.com/Khopa/dcs_liberation/issues/342
The AI isn't making use of these yet, but it's not smart enough to do so
anyway.
Would benefit from an icon to differentiate it on the map.
I'm stretching the definition of "control point" quite a bit. We might
want to put a class above `ControlPoint` for `AirSpawnLocation` to
represent types of spawn locations that can't be captured and don't have
ground objectives.
Fixes https://github.com/Khopa/dcs_liberation/issues/274
Like with deleting waypoints, these will degrade the flight plan to the
2.1 behavior.
Ascend/descend points aren't in use any more, so I removed those.
BAI is used for attacking ground vehicles as opposed to buildings like
strike does, and not air defenses like DEAD does. Unlike strike, BAI is
tolerant of moving targets.
Fixes https://github.com/Khopa/dcs_liberation/issues/216
Fighter sweeps arrive at the target ahead of the rest of the package
(currently a fixed 5 minute lead) to clear out enemy fighters and then
RTB.
Fixes https://github.com/Khopa/dcs_liberation/issues/348
Previously we were trying to make every potential flight plan look
just like a strike mission's flight plan. This led to a lot of special
case behavior in several places that was causing us to misplan TOTs.
I've reorganized this such that there's now an explicit `FlightPlan`
class, and any specialized behavior is handled by the subclasses.
I've also taken the opportunity to alter the behavior of CAS and
front-line CAP missions. These no longer involve the usual formation
waypoints. Instead the CAP will aim to be on station at the time that
the CAS mission reaches its ingress point, and leave at its egress
time. Both flights fly directly to the point with a start time
configured for a rendezvous.
It might be worth adding hold points back to every flight plan just to
ensure that non-formation flights don't end up with a very low speed
enroute to the target if they perform ground ops quicker than
expected.
Also fixes the CAP racetracks so the AI actually stays on station.
Waypoint TOT assignment happens at mission generation time for the
sake of the UI. It's a bit messy since we have the late-initialized
field in FlightWaypoint, but on the other hand we don't have to reset
every extant waypoint whenever the player adjusts the mission's TOT.
If we want to clean this up a bit more, we could have two distinct
types for waypoints: one for the planning stage and one with the
resolved TOTs. We already do some thing like this with Flight vs
FlightData.
Future improvements:
* Estimate the group's ground speed so we don't need such wide margins
of error.
* Delay takeoff to cut loiter fuel cost.
* Plan mission TOT based on the aircraft in the package and their
travel times to the objective.
* Tune target area time prediction. Flights often don't need to travel
all the way to the target point, and probably won't be doing it
slowly, so the current planning causes a lot of extra time spent in
enemy territory.
* Per-flight TOT offsets from the package to allow a sweep to arrive
before the rest, etc.
