Create a WaypointAction class that defines the actions taken at a
waypoint. These will often map one-to-one with DCS waypoint actions but
can also be higher level and generate multiple actions. Once everything
has migrated all waypoint-type-specific behaviors of
PydcsWaypointBuilder will be gone, and it'll be easier to keep the sim
behaviors in sync with the mission generator behaviors.
For now only hold has been migrated. This is actually probably the most
complicated action we have (starting with this may have been a mistake,
but it did find all the rough edges quickly) since it affects waypoint
timings and flight position during simulation. That part isn't handled
as neatly as I'd like because the FlightState still has to special case
LOITER points to avoid simulating the wrong waypoint position. At some
point we should probably start tracking real positions in FlightState,
and when we do that will be solved.
Putting the ingress point directly on one end of the FLOT means that AI
flights won't start searching and engaging targets until they reach that
point. If the front line has advanced toward the flight's departure
airfield, it might overfly targets on its way to the IP.
Instead, place an IP for CAS the same way we place any other IP. The AI
will fly to that and start searching from there.
This also:
* Removes the midpoint waypoint, since it didn't serve any real purpose
* Names the FLOT boundary waypoints for what they actually are
Fixes https://github.com/dcs-liberation/dcs_liberation/issues/2231.
This isn't a great fix for the reason I mention in the comment, but it's
quick and actually is accurate since it looks like we don't actually
handle formation speeds correctly in most cases...
This is probably as "fixed" as this is going to get for now since most
of the flight planning code is in the process of being rewritten.
https://github.com/dcs-liberation/dcs_liberation/issues/3113
We don't need explicit configuration of initial points. The plane
automatically configures any steerpoint immediately before a target
point as an initial point.
Target offset points and aim points have not been implemented because I
can't find any information the describes their intent.
Fixes https://github.com/dcs-liberation/dcs_liberation/issues/3088.
If the package does not have a tanker, the refueling task will cause AI
flights to go to an arbitrary tanker, which may cause them to fly
through enemy territory or even go farther than their arrival airbase.
It's also not remotely possible for every AI flight in the game to
refuel in most missions. There's typically one tanker and dozens of
aircraft that would previously attempt to refuel.
Fixes https://github.com/dcs-liberation/dcs_liberation/issues/2716.
All three refueling missions share a common task type and differentiate
their behavior based on the type and allegiance of the package target.
This means that if the theater commander identifies a carrier as the
best location for a theater refueling task, a recovery tanker will be
planned by mistake.
If this happens on a sunken carrier, mission generation will fail
because a recovery tanker cannot be generated for a sunken carrier.
Fix the crash and the misplanned theater tanker by preventing the
commander from choosing fleet control points as refueling targets.
Fixes https://github.com/dcs-liberation/dcs_liberation/issues/2693.
There doesn't appear to be any reason for us to be poking at
implementation details here aside from changing the name from "unit" to
"building" for that case. Just iterate over the known strike targets.
Making this change uncovered some latent type errors.
Fixes https://github.com/dcs-liberation/dcs_liberation/issues/2564.
- Add the new airassault mission type and special flightplans for it
- Add the mission type to airbase and FOB
- Add Layout for the UH-1H
- Add mission type to capable squadrons
- Allow the auto planner to task air assault missions when preconditions are met
- Improve Airlift mission type and improve the flightplan (Stopover and Helo landing)
- Allow Slingload and spawnable crates for airlift
- Rework airsupport to a general missiondata class
- Added Carrier Information to mission data
- Allow to define CTLD specific capabilities in the unit yaml
- Allow inflight preload and fixed wing support for air assault
* Fix suicide SEAD flights (diving to the SAM)
additional fix for #2152. This sets the Target Waypoint ALT to the Ingress ALT for non player flights. Player flights will have the target waypoint set to 0 AGL so that they can slave weapons or TGP to it.
* Add GroupAttack to SEAD so that they suppress more
* Improve Ingress WP attack tasking and update pydcs
- Updated the Attack Tasking of SEAD, DEAD, Strike and BAI to match the pydcs changes
- Changed DEAD, BAI and SEAD AttackGroup task to expend=auto. This solves an issue where the AI uses all Ammo on one single target as we defined the expend param to All instead of Auto which is used by default.
* Set Expend=All for SEAD Ingress
This ensures that the AI will only do one Attack Pass and also really suppress the Target what they are expected to do.
SEAD flights will have the Search and Engage Group Task instead of the current AttackGroup task when the flight has ARM weapons in the Loadout. This resolves an issue with AI not able to attack a SAM when skynet is used. This is due to the RADAR not emitting and the AI therefore just diving into the SAM.
Non-ARM Loadouts will still use the AttackGroup task. This ensures that for example the ADM-141 TALD used by the F-14s will work correctly
This allows unique identification across saves. The front-end needs to
be able to differentiate the first carrier in game A and the first
carrier in game B, but because carriers (and other non-airfield CPs) are
assigned IDs sequentially, collisions were to be expected. The front-end
can't tell the difference between a reloaded game and a new turn, so we
need to ensure different IDs across games.
This is a handy cleanup anyway, since callers constructing CPs no longer
need to manually track the CP ID counter.
Fixes https://github.com/dcs-liberation/dcs_liberation/issues/2078.
During package planning we don't care about the details of the flight
plan, just the layout (to check if the layout is threatened and we need
escorts). Splitting these will allow us to reduce the amount of work
that must be done in each loop of the planning phase, potentially
caching attempted flight plans between loops.
Split the oversized file into one per plan type. This also moves the
layout responsibility out of the oversized FlightPlanBuilder and into
each flight plan type file.
This is briefly moving us over to my fork of pydcs while we wait for
https://github.com/pydcs/dcs/pull/206 to be merged. The adaptation is
invasive enough that I don't want it lingering for long.
- Fix tgogenerator
- Fix UI for ForceGroup and Layouts
- Fix ammo depot handling
- Split bigger files in smaller meaningful files (TGO, layouts, forces)
- Renamed Template to Layout
- Renamed GroundGroup to TheaterGroup and GroundUnit to TheaterUnit
- Reorganize Layouts and UnitGroups to a ArmedForces class and ForceGroup similar to the AirWing and Squadron
- Reworded the UnitClass, GroupRole, GroupTask (adopted to PEP8) and reworked the connection from Role and Task
- added comments
- added missing unit classes
- added temp workaround for missing classes
- add repariable property to TheaterUnit
- Review and Cleanup
Added serialization for loaded templates
Loading the templates from the .miz files takes a lot of computation time and in the future there will be more templates added to the system. Therefore a local pickle serialization for the loaded templates was re-added:
- The pickle will be created the first time the TemplateLoader will be accessed
- Pickle is stored in Liberation SaveDir
- Added UI option to (re-)import templates
Improvement for factions and templates which will allow decoupling of the templates from the actual units
- Implement UnitGroup class which matches unit_types and possible templates as the needed abstraction layer for decoupling.
- Refactor UnitType, Add ShipUnitType and all ships we currently use
- Remove serialized template.json and migrated to multiple yaml templates (one for each template) and multiple .miz
- Reorganized a lot of templates and started with generalization of many types (AAA, Flak, SHORAD, Navy)
- Fixed a lot of bugs from the previous reworks (group name generation, strike targets...)
- Reorganized the faction file completly. removed redundant lists, added presets for complex groups / families of units like sams
- Reworked the building template handling. Some templates are unused like "village"
- Reworked how groups from templates can be merged again for the dcs group creation (e.g. the skynet plugin requires them to be in the same group)
- Allow to define alternative tasks
- completly refactored the way TGO handles groups and replaced the usage of the pydcs ground groups (vehicle, ship, static) with an own Group and Unit class.
- this allows us to only take care of dcs group generation during miz generation, where it should have always been.
- We can now have any type of unit (even statics) in the same logic ground group we handle in liberation. this is independent from the dcs group handling. the dcs group will only be genarted when takeoff is pressed.
- Refactored the unitmap and the scenery object handling to adopt to changes that now TGOs can hold all Units we want.
- Cleaned up many many many lines of uneeded hacks to build stuff around dcs groups.
- Removed IDs for TGOs as the names we generate are unique and for liberation to work we need no ids. Unique IDs for dcs will be generated for the units and groups only.
* Initial refueling definitions.
* Adding refuel definitions.
* Initial functionality changes
* Regenerate package when adding refueling flight.
* Recursively change package waypoint.
* Fix mypy errors.
* Regenerate flight plans when tanker is added to package.
* Give tanker better starting position on package recovery.
* Add TOT calculation for refueling waypoint.
* Timing changes to Strike split point and Refueling start time.
* Add correct waypoint builder for refuel in tarcap and sweep. Remove restrict afterburner on refuel point.
* Always generate a refuel point for a package.
* Less arbitrary altitude in Refuel track start time calculation.
* Refueling waypoint no longer optional.
* Fix mypy gen error.
* Better discrimination of which tanker flight plan to make.
* Remove refuel tot calculations.
* Remove package regeneration on tanker flight addition.
These should be uncontrolled rather than late activation so that they
are present in the parking area as OCA targets. This bug was introduced
as a mistranslation when I was moving from strings to StartType.
Fixes https://github.com/dcs-liberation/dcs_liberation/issues/1695
This is the first step in a larger project to add play/pause buttons to
the Liberation UI so the mission can be generated at any point.
docs/design/turnless.md describes the plan.
This adds an option to fast forward the turn to first contact before
generating the mission. None of that is reflected in the UI (for now),
but the miz will be generated with many flights in the air.
For now "first contact" means as soon as any flight reaches its IP. I'll
follow up to add threat checking so that air-to-air combat also triggers
this, as will entering a SAM's threat zone.
This also includes an option to halt fast-forward whenever a player
flight reaches a certain mission-prep phase. This can be used to avoid
fast forwarding past the player's startup time, taxi time, or takeoff
time. By default this option is disabled so player aircraft may start in
the air (possibly even at their IP if they're the first mission to reach
IP).
Fuel states do not currently account for distance traveled during fast
forward. That will come later.
https://github.com/dcs-liberation/dcs_liberation/issues/1681
