diff --git a/tools/aircrack-ng.md b/tools/aircrack-ng.md
index bcb5832..b36c8b5 100644
--- a/tools/aircrack-ng.md
+++ b/tools/aircrack-ng.md
@@ -33,7 +33,7 @@ Notes
     [- tkiptun-ng](#tkiptun-ng)  
     [- wesside-ng](#wesside-ng)  
 	
-Info:
+**Info:**  
 
 # airbase-ng  
 # aircrack-ng  
@@ -48,14 +48,14 @@ Description:
 
 This script can be used to enable monitor mode on wireless interfaces. It may also be used to go back from monitor mode to managed mode. Entering the airmon-ng command without parameters will show the interfaces status.  
 
-	* `airmon-ng <start|stop> <interface> [channel] or airmon-ng <check|check kill>`  
+	* airmon-ng <start|stop> <interface> [channel] or airmon-ng <check|check kill>  
 	 
 	 Where:  
 
-    * `<start|stop> indicates if you wish to start or stop the interface. (Mandatory)`  
-    * `<interface> specifies the interface. (Mandatory)`  
-    * `[channel] optionally set the card to a specific channel. (Optional)`  
-    * `<check|check kill> “check” will show any processes that might interfere with the aircrack-ng suite. It is strongly recommended that these processes be eliminated prior to using the aircrack-ng suite. “check kill” will check and kill off processes that might interfere with the aircrack-ng suite. For “check kill” see`  
+    * <start|stop> indicates if you wish to start or stop the interface. (Mandatory)  
+    * <interface> specifies the interface. (Mandatory)  
+    * [channel] optionally set the card to a specific channel. (Optional)  
+    * <check|check kill> “check” will show any processes that might interfere with the aircrack-ng suite. It is strongly recommended that these processes be eliminated prior to using the aircrack-ng suite. “check kill” will check and kill off processes that might interfere with the aircrack-ng suite. For “check kill” see  
 
 # airodump-ng  
 Description  
@@ -66,45 +66,45 @@ Additionally, airodump-ng writes out several files containing the details of all
 usage: airodump-ng <options> <interface>[,<interface>,...]
 
 Options:  
-    --ivs               : Save only captured IVs
-    --gpsd              : Use GPSd
-    --write    <prefix> : Dump file prefix
-    -w                  : same as --write
-    --beacons           : Record all beacons in dump file
-    --update     <secs> : Display update delay in seconds
-    --showack           : Prints ack/cts/rts statistics
-    -h                  : Hides known stations for --showack
-    -f          <msecs> : Time in ms between hopping channels
-    --berlin     <secs> : Time before removing the AP/client
-                          from the screen when no more packets
-                          are received (Default: 120 seconds)
-    -r           <file> : Read packets from that file
-    -x          <msecs> : Active Scanning Simulation
-    --output-format  
-              `<formats> : Output format. Possible values:  
-                          pcap, ivs, csv, gps, kismet, netxml  
-                          Short format "-o"  
-                          The option can be specified multiple times.  In this case, each file format  
-                          specified will be output.  Only ivs or pcap can be used, not both.  
+  --ivs               : Save only captured IVs
+  --gpsd              : Use GPSd
+  --write    <prefix> : Dump file prefix
+  -w                  : same as --write
+  --beacons           : Record all beacons in dump file
+  --update     <secs> : Display update delay in seconds
+  --showack           : Prints ack/cts/rts statistics
+  -h                  : Hides known stations for --showack
+  -f          <msecs> : Time in ms between hopping channels
+  --berlin     <secs> : Time before removing the AP/client
+                        from the screen when no more packets
+                        are received (Default: 120 seconds)
+  -r           <file> : Read packets from that file
+  -x          <msecs> : Active Scanning Simulation
+  --output-format  
+             <formats> : Output format. Possible values:  
+                         pcap, ivs, csv, gps, kismet, netxml  
+                         Short format "-o"  
+                         The option can be specified multiple times.  In this case, each file format  
+                         specified will be output.  Only ivs or pcap can be used, not both.  
 
 Filter options:  
-    --encrypt   <suite> : Filter APs by cipher suite  
-    --netmask <netmask> : Filter APs by mask  
-    --bssid     <bssid> : Filter APs by BSSID  
-    -a                  : Filter unassociated clients  
+  --encrypt   <suite> : Filter APs by cipher suite  
+  --netmask <netmask> : Filter APs by mask  
+  --bssid     <bssid> : Filter APs by BSSID  
+  -a                  : Filter unassociated clients  
 
 By default, airodump-ng hop on 2.4Ghz channels.  
 You can make it capture on other/specific channel(s) by using:    
-    --channel <channels>: Capture on specific channels  
-    --band <abg>        : Band on which airodump-ng should hop  
-    -C    <frequencies> : Uses these frequencies in MHz to hop  
-    --cswitch  <method> : Set channel switching method`  
-                  0     : FIFO (default)  
-                  1     : Round Robin  
-                  2     : Hop on last  
-    -s                  : same as --cswitch  
+  --channel <channels>: Capture on specific channels  
+  --band <abg>        : Band on which airodump-ng should hop  
+  -C    <frequencies> : Uses these frequencies in MHz to hop  
+  --cswitch  <method> : Set channel switching method`  
+                0     : FIFO (default)  
+                1     : Round Robin  
+                2     : Hop on last  
+  -s                  : same as --cswitch  
 
-    --help              : Displays this usage screen  
+  --help              : Displays this usage screen  
 						  
 # airolib-ng  
 # airserv-ng  
@@ -117,7 +117,7 @@ You can make it capture on other/specific channel(s) by using:
 # Example Usage 
 
 
-
+# Links
 
 Resource Page: http://www.aircrack-ng.org/resources.html