To work correctly hostapd requires wireless driver to allow interfaces
removal. It was working with brcmfmac only partially. Firmware for
BCM43602 got some special hack (feature?) that allowed removing all
interfaces by disabling mbss mode. It wasn't working with BCM4366
firmware and remaining interfaces were preventing hostapd from starting
again.
Those patches add support for "interface_remove" firmware method which
works with BCM4366 firmware and they make it finally possible to use
BCM4366 & brcmfmac & multiple interfaces.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
This makes brcmfmac compatible with mac80211 which uses dev_alloc_name
(and so returns -ENFILE on error).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49378 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48897
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48899 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48895
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48898 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48883
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48884 3c298f89-4303-0410-b956-a3cf2f4a3e73
In order to set the multicast rate for mesh point interfaces the "mesh join"
was made explicit and moved to mac80211_setup_vif(), similar to how it is
done for IBSS interfaces.
Previously, the mesh join was made implicit in case authentication (i.e.
$key) was not used when creating the interface in mac80211_prepare_vif(),
while using authentication would create the interface first, then join
later in mac80211_setup_vif() by starting authsae.
Signed-off-by: Nils Schneider <nils@nilsschneider.net>
Backport of r47408
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48858 3c298f89-4303-0410-b956-a3cf2f4a3e73
fix rescue mode on wdr4900
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Backport of r48793
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48851 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48732
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48850 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48371
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48392 3c298f89-4303-0410-b956-a3cf2f4a3e73
This pulls in CONFIG_KEYS, which bloats up the kernel size and is thus
very undesirable. It also currently exposes the kernel to a local root
vulnerability
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48364
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48365 3c298f89-4303-0410-b956-a3cf2f4a3e73
backport of [48219]
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48220 3c298f89-4303-0410-b956-a3cf2f4a3e73
It allows user-space fetch associated STAs and e.g. iwinfo/luci display
them.
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48167 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patches also adds BCM4366 support which may be found on some new
routers based on BCM47094 or BCM4709C0. Unfortunately firmware is still
missing for this chipset.
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48166 3c298f89-4303-0410-b956-a3cf2f4a3e73
After last commit we got few unuset slots (prefixes). Use all available
numbers one by one to allow more backports.
This doesn't change a single patch (or order), only renames files.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48164 3c298f89-4303-0410-b956-a3cf2f4a3e73
It doesn't change any single patch (or order), it only renames files.
This creates some place for more backports, as we were already using
398 prefix which left only 1 slot.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48163 3c298f89-4303-0410-b956-a3cf2f4a3e73
backport of [48152]
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48153 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48018
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48023 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47187
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47188 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47142
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47144 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47042
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47044 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46900
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46901 3c298f89-4303-0410-b956-a3cf2f4a3e73
backport of r46749
Without this patch adding the wifi device to the bridge may fail
because the bridge is not already configured when the wifi device gets
configured. This patch makes broadcom-wl wait till the bridge is ready.
This fixes#17262
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46750 3c298f89-4303-0410-b956-a3cf2f4a3e73
This also adds one patchset of pending changes that fix support for
multiple interfaces. It was somehow broken.
Driver couldn't correctly match firmware and system interfaces resulting
in not working APs and WARNINGs.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46736 3c298f89-4303-0410-b956-a3cf2f4a3e73
This prepares some place for backporting extra patches.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46735 3c298f89-4303-0410-b956-a3cf2f4a3e73
The ipw2x00 drivers assume that the system they are running is little
endian, and access everything in native byte order. When run on a big
endian system, everything breaks apart.
Since fixing this is non trivial on a first glance, disable them for
big endian targets.
Backport of r46708.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46710 3c298f89-4303-0410-b956-a3cf2f4a3e73
