To work correctly hostapd requires wireless driver to allow interfaces
removal. It was working with brcmfmac only partially. Firmware for
BCM43602 got some special hack (feature?) that allowed removing all
interfaces by disabling mbss mode. It wasn't working with BCM4366
firmware and remaining interfaces were preventing hostapd from starting
again.
Those patches add support for "interface_remove" firmware method which
works with BCM4366 firmware and they make it finally possible to use
BCM4366 & brcmfmac & multiple interfaces.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
- Expose supported HT rate information in info call
- Zero out ccode buffer when listing countries
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
This makes brcmfmac compatible with mac80211 which uses dev_alloc_name
(and so returns -ENFILE on error).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49378 3c298f89-4303-0410-b956-a3cf2f4a3e73
openssl: Update to version 1.0.2h
Bump to the latest version, fixes several security issues:
* CVE-2016-2107, CVE-2016-2105, CVE-2016-2106, CVE-2016-2109, CVE-2016-2176
More details at https://www.openssl.org/news/openssl-1.0.2-notes.html
Signed-off-by: Mohammed Berdai <mohammed.berdai@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49363 3c298f89-4303-0410-b956-a3cf2f4a3e73
1) Put sanity checks in one place
2) Respect provided offset
3) Read only as much data as needed for MD5 calculation
Thanks to the last change this is a great speedup and memory saver. On
devices with NAND flash we were allocating & reading about 128 MiB while
something about 8 MiB is enough.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r49309
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49313 3c298f89-4303-0410-b956-a3cf2f4a3e73
This buf is only used in this function now, so lets move it there.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r49308
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49312 3c298f89-4303-0410-b956-a3cf2f4a3e73
This will allow separating first block buffer from a buffer used for MD5
calculation.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r49307
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49311 3c298f89-4303-0410-b956-a3cf2f4a3e73
This allows us to drop some extra offset calculations and simplifies
code a bit.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r49306
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49310 3c298f89-4303-0410-b956-a3cf2f4a3e73
This avoid long (and unneeded) process of reading all data in case of
running on MTD not containig Seama entity.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r49304
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49305 3c298f89-4303-0410-b956-a3cf2f4a3e73
On platforms supporting both: TRX and Seama calling "fixtrx" was
resulting in trying to fix Seama as well.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r49301
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49303 3c298f89-4303-0410-b956-a3cf2f4a3e73
This makes code style consistent across the whole file.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r49300
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49302 3c298f89-4303-0410-b956-a3cf2f4a3e73
Currently system log is always included as a part of ubox.
Add logd as a seperate package and add it to default packages list.
Signed-off-by: Andrej Vlasic <andrej.vlasic@sartura.hr>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49294 3c298f89-4303-0410-b956-a3cf2f4a3e73
This reverts commit 0fd48fd7dab066db8a46e51775579c9ef507ca25.
We are facing some problem on rolling out the current 15.05-branch to
our devices because the image name changed.
The changed image name breaks compatibility for derived projects and
that's something which should only happen if there is a really good
reason (e.g. security fix).
Signed-off-by: Tim Niemeyer <tim@tn-x.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49231 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r47914 to CC.
Without this patch the TDW8970 is left without any status LED at all,
even during preinit and failsafe.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49230 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r47911, r47912, r47969 to CC.
All other required patches have already been backported in r48822.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49229 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds support for the TP-Link TL-WR841N to OpenWrt Chaos Calmer
15.05. Confirmed working [1] and [2].
Signed-off by Stijn Segers <francesco.borromini@inventati.org>
[1] https://forum.openwrt.org/viewtopic.php?id=63657
[2] https://forum.openwrt.org/viewtopic.php?id=61309
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49228 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch backports support for the TP-Link TL-WA901ND v4 to Chaos Calmer 15.05.1,
which was added into trunk recently [1].
Signed-off by Stijn Segers <francesco.borromini@inventati.org>
[1]: http://patchwork.ozlabs.org/patch/606780/
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49226 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds support for the TP-Link TL-WR740N v6 to OpenWrt Chaos Calmer. Hardware wise, it's very similar to the TL-WR841N v10. See the forum thread [1]. Credit goes to the user 'traveler' who did the legwork and tested builds.
Also thanks to Matthias Schiffer for clarifying the DEVICE_PROFILE settings.
Signed-off by: Stijn Segers <francesco.borromini@inventati.org>
[1]: https://forum.openwrt.org/viewtopic.php?pid=318704
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49225 3c298f89-4303-0410-b956-a3cf2f4a3e73
Archer C7 V2.0 units from December 2015 onwards ( serials starting 215C
) have changed flash chips to the gd25q128 chip, this is supported in
trunk but not presently in 15.05. I would like stable support for this
version so I've back ported the required fix from trunk and removed a
conflicting patch from bcm53xx I've tested the patch it and I'm able to
install a build of 15.05.1 on a new Archer C7 device with this patch.
Signed-off-by: John Marrett <johnf@zioncluster.ca>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49220 3c298f89-4303-0410-b956-a3cf2f4a3e73
It was already increased for NAND devices so do the same for the ones
with serial memory.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r49207
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49208 3c298f89-4303-0410-b956-a3cf2f4a3e73
Reconfiguring the UART when the FIFO is not empty may cause the boot to
hang. This hang is extremely suspectible to timing differences; recompiling
the kernel with the same configuration, but different UTS_VERSION
timestamps can yield images that hang more or less often. Sometimes images
are produced that hang reproducibly.
This patch should also make it into one of the next linux-stable releases,
but it's better to get this fixed as soon as possible.
Fixes#21773, #21857.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Backport of r49156
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49202 3c298f89-4303-0410-b956-a3cf2f4a3e73
the fullduplex on CS1 is broken. remove the fullduplex support and run on
plain half duplex on both CS lines.
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49201 3c298f89-4303-0410-b956-a3cf2f4a3e73
there is a deadlock that triggers under heavy bus load. until the bug is
fxed, revert to an old version of the I2C driver that does not suffer
from this issue.
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49200 3c298f89-4303-0410-b956-a3cf2f4a3e73
We need to fix Seama just like we fix TRX due to the rootfs mark.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r48522
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49170 3c298f89-4303-0410-b956-a3cf2f4a3e73
There are D-Link bcm53xx devices using Seama format.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r48521
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49169 3c298f89-4303-0410-b956-a3cf2f4a3e73
