Luka Perkov
1fcecf6f5b
targets: base-files: diag.sh does not need to be executable
...
Signed-off-by: Luka Perkov <luka@openwrt.org >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2015-02-07 19:58:58 +00:00
John Crispin
ff1614a661
add "preinit_regular" diag.sh set_state argument
...
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-12-15 10:37:00 +00:00
Steven Barth
3823e9634d
network: Unbind DHCPv6 from underlying interfaces
...
This allows IPv6 to set up without IPv4 being up thus
IPv6-only or IPv6+DS-Lite working with the default config.
Signed-off-by: Steven Barth <steven@midlink.org >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2014-10-08 13:08:05 +00:00
John Crispin
02f1075b0a
base-files: diag does not need to insmod any drivers, procd already did it for us
...
Signed-off-by: John Crispin <blogic@openwrt.org >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-06-21 16:53:43 +00:00
Steven Barth
276de79fca
Change default IPv6 config to enable DHCPv6-PD
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-22 19:40:16 +00:00
Steven Barth
4c9003ffc7
Adapt default network configuration for IPv6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36278 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-04-09 08:03:08 +00:00
Gabor Juhos
d5e9696c49
adm5120: migrate to common led helper functions
...
[juhosg: migrate to status_led_blink_{preinit,failsafe} helpers]
Signed-off-by: Michael Heimpold <mhei@heimpold.de >
Signed-off-by: Gabor Juhos <juhosg@openwrt.org >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35649 3c298f89-4303-0410-b956-a3cf2f4a3e73
2013-02-18 09:56:26 +00:00
Florian Fainelli
75d0271704
[adm5120] do no longer rename amba-pl010 serial devices names
...
Back in the days when we could not override /etc/inittab, it made a lot
of sense to rename ttyAM to ttyS since this was the only supported
serial device(s), we can now just put in an appropriate /etc/inittab file
now.
Signed-off-by: Florian Fainelli <florian@openwrt.org >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-03 16:18:40 +00:00
Jo-Philipp Wich
d75509fe4d
base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-10 12:16:41 +00:00
Jo-Philipp Wich
ca5eb9dd8f
add timeserver config to target specific system configs as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-04 12:53:35 +00:00
Florian Fainelli
bcc1c50eb9
[adm5120] add default network/leds config ( #6759 )
...
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com >
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-27 21:49:42 +00:00
Felix Fietkau
fd4ddfd240
add preinit modularization work by Daniel Dickinson (cshore)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19331 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-25 17:11:17 +00:00
Gabor Juhos
eeb604beb9
adm5120: add kmod-leds-gpio and kmod-ledtrig-adm5120-switch to the default packages
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-01-02 15:07:39 +00:00
Felix Fietkau
5bdd866100
get rid of $Id$ - it has never helped us and it has broken too many patches ;)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15242 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-04-17 14:09:46 +00:00
Gabor Juhos
672d15d39e
[adm5120] add initial failsafe support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11403 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-08 06:38:26 +00:00
Gabor Juhos
9233c3cdb9
get rid of per-profile base-files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9069 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-29 14:27:54 +00:00
