mirror of
https://github.com/hak5/wifipineapple-openwrt.git
synced 2025-10-29 16:57:19 +00:00
1508cf8713
1) Put sanity checks in one place 2) Respect provided offset 3) Read only as much data as needed for MD5 calculation Thanks to the last change this is a great speedup and memory saver. On devices with NAND flash we were allocating & reading about 128 MiB while something about 8 MiB is enough. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Backport of r49309 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49313 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org