add legacy page

legacy.md

@@ -0,0 +1,46 @@
+# Legacy
+
+This article is dedicated to the **Mark IV** version of the WiFi Pineapple, and contains guides for various aspects of the Mark IV and how to recover your Mark IV.
+
+## Accessing the UART
+
+The instructions for connecting via the UART are the same as the Mark V's. They are located at [Serial UART](serial_uart.md).
+
+## Enabling WAN
+
+To utilize the WAN port, execute these commands from an SSH Session:
+
+```
+iptables -A FORWARD -i eth1 -o wlan0 -s 172.16.42.0 -m state --state NEW -j ACCEPT
+iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
+iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE
+```
+
+## SSLStrip
+To use SSLStrip, you must first install it :
+
+```
+opkg update
+opkg install sslstrip
+opkg install --dest usb python
+```
+
+Then execute these commands:
+
+```
+ln -s /usb/usr/lib/python2.7 /usr/lib/python2.7
+touch /usb/usr/lib/python2.7/site-packages/zope/__init__.py
+```
+
+Now you need to configure IP Tables:
+
+```
+iptables -t nat -A PREROUTING -p tcp –destination-port 80 -j REDIRECT –to-ports 10000
+iptables -t nat -A PREROUTING -p tcp –destination-port 443 -j REDIRECT –to-ports 10000
+```
+
+All you need to do now is execute SSLStrip.
+
+```
+sslstrip -w sslstrip.log &
+```