the fullduplex on CS1 is broken. remove the fullduplex support and run on
plain half duplex on both CS lines.
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49201 3c298f89-4303-0410-b956-a3cf2f4a3e73
there is a deadlock that triggers under heavy bus load. until the bug is
fxed, revert to an old version of the I2C driver that does not suffer
from this issue.
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@49200 3c298f89-4303-0410-b956-a3cf2f4a3e73
Remove the kmod-mt76 package from the EX2700 profile to free up
around 100 KiB of space on the root filesystem.
This patch applies to both trunk and Chaos Calmer.
Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48887 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch adds support for the Netgear EX2700 in Chaos Calmer and
builds approriate -sysupgrade and -factory images.
Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48792 3c298f89-4303-0410-b956-a3cf2f4a3e73
the u2_phy init was missing
Backport of r48747
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48749 3c298f89-4303-0410-b956-a3cf2f4a3e73
The image name for the HiLink HLK-RM04 module has a typo and should read "RM04" rather than "RM02"
Backport of r48355
Signed-off-by: John Clark <inindev@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48430 3c298f89-4303-0410-b956-a3cf2f4a3e73
Port 4 is the only ethernet port on this router, so disable all other PHYs
in order to save power.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48097 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch allows configuring ports to be disabled in the device tree; this
saves power, since disabling ports here actually disables power to ethernet
PHYs.
Line 461 enables all ethernet ports, so line 508 is getting zero ports to be
disabled, except for port 5 in SoCs where this is not implemented as it will
be sticky disabled in register POC0. Because of this, the code will still read
the switch configuration and OR it to the device tree setting.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48096 3c298f89-4303-0410-b956-a3cf2f4a3e73
Line 461 is actually enabling all switch ports by setting the disable bits
to 0. This needs to be done because the bootloader sets all ports to disabled
by default (which is the case for at least one router based on RT5350).
So, this patch fixes the comment in line 460.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48095 3c298f89-4303-0410-b956-a3cf2f4a3e73
there was an incorrect usage of tx path helpers in the rx path causing the code to
run into endless sleep states
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47812 3c298f89-4303-0410-b956-a3cf2f4a3e73
In backport commit r47605 the LED was named wrongly in a userspace
script.
Also remove reference to undefined pinmux group "wdt rst" causing
logline
rt2880-pinmux pinctrl: invalid group "wdt rst" for function "gpio"
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47773 3c298f89-4303-0410-b956-a3cf2f4a3e73
Backport of r47351
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47605 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47388
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47390 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47373
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47374 3c298f89-4303-0410-b956-a3cf2f4a3e73
this unbreaks glibc builds
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47266
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47268 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch is adding the missing board detection of WIZnet WizFi630A board.
ramips.sh was not submitted with the former patch.
This belongs to to the backport of patch r46921
Signed-off-by: Tobias Welz <tw@wiznet.eu>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47243 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47238
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47239 3c298f89-4303-0410-b956-a3cf2f4a3e73
add the alsa driver from the latest RTSDK
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47205
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47230 3c298f89-4303-0410-b956-a3cf2f4a3e73
When talking to an atmel controller we need 9600 or 250000 baud.
as 250000 does not exist we use 2500000.
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47204
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47228 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47203
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47227 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47203
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47226 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46474
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47101 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47076
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47100 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47074
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47099 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46475
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47098 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r47073
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47097 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46659
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47096 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46959
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47095 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46958
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47094 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46957
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47093 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46956
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47092 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46955
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47091 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46954
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47090 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46953
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47089 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46951
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47087 3c298f89-4303-0410-b956-a3cf2f4a3e73
only tested on mt7628
Signed-off-by: John Crispin <blogic@openwrt.org>
Backport of r46950
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47086 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch is to add the WIZnet WizFi630A board as a new platform. The board is in mini pci express form factor.
Signed-off-by: Tobias Welz <tw@wiznet.eu>
This is a backport of patch r46921
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47072 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r46904
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46905 3c298f89-4303-0410-b956-a3cf2f4a3e73
