This patches also adds BCM4366 support which may be found on some new
routers based on BCM47094 or BCM4709C0. Unfortunately firmware is still
missing for this chipset.
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48166 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47284
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48165 3c298f89-4303-0410-b956-a3cf2f4a3e73
After last commit we got few unuset slots (prefixes). Use all available
numbers one by one to allow more backports.
This doesn't change a single patch (or order), only renames files.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48164 3c298f89-4303-0410-b956-a3cf2f4a3e73
It doesn't change any single patch (or order), it only renames files.
This creates some place for more backports, as we were already using
398 prefix which left only 1 slot.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48163 3c298f89-4303-0410-b956-a3cf2f4a3e73
backport of [48152]
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48153 3c298f89-4303-0410-b956-a3cf2f4a3e73
It was never tested, most likely not working (because of le32_to_cpu)
and not upstreamed.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r48060
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48139 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48135
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48136 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is a patch for CVE-2015-5252, CVE-2015-5296 and CVE-2015-5299. A
patchset for these vulnerabilities was published on 16th December 2015.
Signed-off-by: Jan Čermák <jan.cermak@nic.cz>
Backport of r48133
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48134 3c298f89-4303-0410-b956-a3cf2f4a3e73
Port 4 is the only ethernet port on this router, so disable all other PHYs
in order to save power.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48097 3c298f89-4303-0410-b956-a3cf2f4a3e73
This patch allows configuring ports to be disabled in the device tree; this
saves power, since disabling ports here actually disables power to ethernet
PHYs.
Line 461 enables all ethernet ports, so line 508 is getting zero ports to be
disabled, except for port 5 in SoCs where this is not implemented as it will
be sticky disabled in register POC0. Because of this, the code will still read
the switch configuration and OR it to the device tree setting.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48096 3c298f89-4303-0410-b956-a3cf2f4a3e73
Line 461 is actually enabling all switch ports by setting the disable bits
to 0. This needs to be done because the bootloader sets all ports to disabled
by default (which is the case for at least one router based on RT5350).
So, this patch fixes the comment in line 460.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48095 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48005
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48093 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48085
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48092 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47873
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48091 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47871
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48090 3c298f89-4303-0410-b956-a3cf2f4a3e73
My last bugfix (r47538) introduced a new bug in wndr3700_board_detect
(again...).
Assigning the result of ar71xx_get_mtd_offset_size_format to the model
variable before stripping of garbage using awk will cause all NUL bytes to
be removed before awk is applied, leading to model strings like
"NETGEAR WNDRMACv2NETGEAR", where a NUL byte after the v2 is supposed to
terminate the string.
Fix by calling ar71xx_get_mtd_offset_size_format twice, once piping to awk
directly.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Backport of r48075
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48089 3c298f89-4303-0410-b956-a3cf2f4a3e73
When fixing the model string for WNDR3700v2 which contain a model string
followed by 0xff in r46455, the match for other versions of the WNDR3700v2
which just contain lots of 0xff broke (as the 0xff $model is checked for
is stripped off).
Fix by stripping off non-printable characters only for the actual output
string, but not for the internal matching.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Backport of r47538
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48088 3c298f89-4303-0410-b956-a3cf2f4a3e73
There are a few NETGEAR devices which don't terminate the model name in the
ART with a NUL byte, at least some NETGEAR WNDR3700v2. The current awk
expression doesn't match 0xFF bytes, so AR71XX_MODEL contains lots of
trailing 0xFF garbage in this case.
Fix this by matching for the first non-printable character and explicitly
setting LC_CTYPE=C (probably not strictly necessary on OpenWrt, but will
definitely work like this, even when awk supports locales and LANG is set).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Backport of r46455
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48087 3c298f89-4303-0410-b956-a3cf2f4a3e73
using the special tag in this way lead to port mirroring for certain types of traffic.
fallback to using th PMAC_EWAN register for the wan portmap.
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48086 3c298f89-4303-0410-b956-a3cf2f4a3e73
This fixes regression introduced in my recent ledtrig-netdev commit.
Events triggered by different interfaces were stopping timer so it
wasn't working for tx/rx mode.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r48072
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48074 3c298f89-4303-0410-b956-a3cf2f4a3e73
The ppp0 interface is renamed after the connection is established. Due
to a missing NETDEV_REGISTER event, the ledtrig-netdev isn't aware of
the renamed interface and literally ignores the device
(no tx/rx indication, led isn't switched off with 'ifdown wan').
Signed-off-by: Mathias Kresin <openwrt@kresin.me>
Backport of r48048
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48073 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r48018
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48023 3c298f89-4303-0410-b956-a3cf2f4a3e73
Previously switching to non-existing device (interface) could result in
leaving LED on.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r47990
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47992 3c298f89-4303-0410-b956-a3cf2f4a3e73
We may just delete timer on every trigger update and then start it again
if needed. This will let us avoid both: races and locking in frequently
called timer callback.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r47987
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47991 3c298f89-4303-0410-b956-a3cf2f4a3e73
Read/write lock was adding useless complexity, there wasn't any real
gain in case of this driver.
Also switch to _bh variants to avoid deadlocks.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r47986
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47989 3c298f89-4303-0410-b956-a3cf2f4a3e73
All supported kernels require patching ledtrig-netdev in the same way,
so it's safe to just move these changes to the base version of this
driver. We needed these patches for some old kernels 2.6.36 and 3.11.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r47962
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47988 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47966
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47967 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47963
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47964 3c298f89-4303-0410-b956-a3cf2f4a3e73
This reverts r47245.
Linking to shared libraries under $STAGING_DIR_HOST{,/usr}/lib is harmful,
as these directories aren't added to LD_LIBRARY_PATH (see r47103 for an
explanation why LD_LIBRARY_PATH is not used).
Revert to static linking; in particular, this fixes the build of the python
bz2 module on OpenSUSE and Fedora (which in turn broke the build of
nodejs).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Backport of r47950
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47951 3c298f89-4303-0410-b956-a3cf2f4a3e73
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Backport of r47892
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47895 3c298f89-4303-0410-b956-a3cf2f4a3e73
there was an incorrect usage of tx path helpers in the rx path causing the code to
run into endless sleep states
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47812 3c298f89-4303-0410-b956-a3cf2f4a3e73
This replaces old bcm53xx patch for scanning whole flash and makes
bcm47xxpart compatible with NAND.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Backport of r47800
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47803 3c298f89-4303-0410-b956-a3cf2f4a3e73
The TL-WR841N/ND v10 is mostly identical to the v9. Apart from some minor
changes, it contains a newer revision of the QCA9533 SoC and the CPU clock
is significantly higher.
Backport of r47263
Signed-off-by: Matteo Valentini <matteo.valentini@wiman.me>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47788 3c298f89-4303-0410-b956-a3cf2f4a3e73
ath9k expects to get revision id 2 for the QCA9531 ver. 2 rev. 0. This
fixes the very low TX power on some devices like the TP-LINK
TL-WR841ND v10
As ath79_soc_rev is only used to get the revision number to ath9k on the
QCA9533, just set it to the expected value on the ver. 2.
Backport of r47262
Signed-off-by: Matteo Valentini <matteo.valentini@wiman.me>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47787 3c298f89-4303-0410-b956-a3cf2f4a3e73
In backport commit r47605 the LED was named wrongly in a userspace
script.
Also remove reference to undefined pinmux group "wdt rst" causing
logline
rt2880-pinmux pinctrl: invalid group "wdt rst" for function "gpio"
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47773 3c298f89-4303-0410-b956-a3cf2f4a3e73
The HOST_*FLAGS are for compiling programs which will run on the machine that is
running the build. Setting these flags is frequently required for unusual
cross-compiles.
Signed-off-by: Lawrence D'Anna <larry@elder-gods.org>
Backport of r46424
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47651 3c298f89-4303-0410-b956-a3cf2f4a3e73
backport of r47300
Release announcement:
http://lists.freedesktop.org/archives/pkg-config/2015-September/001019.html
Drop patches, as they have been implemented upstream.
This also fixes a build problem in the glib configure script when the
user id is bigger than 2^21 - 1.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Felix Fietkau <nbd@openwrt.org> [fix OSX compatibility]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47608 3c298f89-4303-0410-b956-a3cf2f4a3e73
